RESUMO
Iridium(I) N-heterocyclic carbene complexes of formula Ir(κ2 O,O'-BHetA)(IPr)(η2 -coe) [BHetA=bis-heteroatomic acidato, acetylacetonate or acetate; IPr=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-carbene; coe=cyclooctene] have been prepared by treating Ir(κ2 O,O'-BHetA)(η2 -coe)2 complexes with IPr. These complexes react with 2-vinylpyridine to afford the hydrido-iridium(III)-alkenyl cyclometalated derivatives IrH(κ2 O,O'-BHetA)(κ2 N,C-C7 H6 N)(IPr) through the iridium(I) intermediate Ir(κ2 O,O'-BHetA)(IPr)(η2 -C7 H7 N). The cyclometalated IrH(κ2 O,O'-acac)(κ2 N,C-C7 H6 N)(IPr) complex efficiently catalyzes the hydroalkenylation of aromatic and aliphatic terminal alkynes and enynes with 2-vinylpyridine to afford 2-(4R-butadienyl)pyridines with Z,E configuration as the major reaction products (yield up to 89 %). In addition, unprecedented (Z)-2-butadienyl-5R-pyridine derivatives have been obtained as minor reaction products (yield up to 21 %) from the elusive 1Z,3gem-butadienyl hydroalkenylation products. These compounds undergo a thermal 6π-electrocyclization to afford bicyclic 4H-quinolizine derivatives that, under catalytic reaction conditions, tautomerize to 6H-quinolizine to afford the (Z)-2-(butadienyl)-5R-pyridine by a retro-electrocyclization reaction.
RESUMO
A series of Rh(κ2 -BHetA)(η2 -coe)(IPr) complexes bearing 1,3-bis-hetereoatomic acidato ligands (BHetA) including carboxylato (O,O), thioacetato (O,S), amidato (O,N), thioamidato (N,S), and amidinato (N,N), have been prepared by reaction of the dinuclear precursor [Rh(µ-Cl)(IPr)(η2 -coe)]2 with the corresponding anionic BHetA species. The RhI -NHC-BHetA compounds catalyze the dimerization of aryl alkynes, showing excellent selectivity for the head-to-tail enynes. Among them, the acetanilidato-based catalyst has shown an outstanding catalytic performance reaching unprecedented TOF levels of 2500â h-1 with complete selectivity for the gem-isomer. Investigation of the reaction mechanism supports a non-oxidative pathway in which the BHetA ligand behaves as proton shuttle through intermediate κ1 -HBHetA species. However, in the presence of pyridine as additive, the identification of the common RhIII H(C≡CPh)2 (IPr)(py)2 intermediate gives support for an alternative oxidative route.
RESUMO
This review summarises the most recent advances in Ir-NHC catalysis while revisiting all the classical reactions in which this type of catalyst has proved to be active. The influence of the ligand system and, in particular, the impact of the NHC ligand on the activity and selectivity of the reaction have been analysed, accompanied by an examination of the great variety of catalytic cycles hitherto reported. The reaction mechanisms so far proposed are described and commented on for each individual process. Moreover, some general considerations that attempt to explain the influence of the NHC from a mechanistic viewpoint are presented at the end of the review. The first sections are dedicated to the most widely explored reactions that use Ir-NHCs, i.e., hydrogenation and transfer hydrogenation, for which a general overview that tries to compile all the Ir-NHC catalysts hitherto reported for these processes is provided. The next sections deal with hydrogen borrowing, hydrosilylation, water splitting, dehydrogenation (of alcohols, alkanes, aminoboranes and formic acid), hydrogen isotope exchange (HIE), signal amplification by reversible exchange and C-H bond functionalisation (silylation and borylation). The last section compiles a series of reactions somewhat less explored for Ir-NHC catalysts that include the hydroalkynylation of imines, hydroamination, diboration of olefins, hydrolysis and methanolysis of silanes, arylation of aldehydes with boronic acids, addition of aroyl chlorides to alkynes, visible light driven reactions, isomerisation of alkenes, asymmetric intramolecular allylic amination and reactions that employ heterometallic catalysts containing at least one Ir-NHC unit.
RESUMO
The paddlewheel-shaped complex [Sb(µ-pyS)4 Rh]2 (1) (pyS- = 2-S-C5 H4 N- ) was synthesized from [Rh(pyS)(cod)]2 (cod=1,5-cyclooctadiene) and Sb(pyS)3 . Upon oxidation with ONMe3 , the complex [(µ-O)Sb(µ-pyS)3 Rh(κ2 -pyS)]2 (2) is formed. Both 1 and 2 form dimers and feature short Rh-Sb bonds and bridging pyS ligands. 121 Sb Mössbauer spectro- scopy and computational studies were employed to elucidate the Rh-Sb bonding in 1 and 2. Both covalent (Rh-Sb, X-type Sb ligand) and dative (RhâSb, Z-type; RhâSb L-type Sb ligand) interactions have to be considered for the description of their bonding situations.
RESUMO
The hydrosilylation of CO2 with different silanes such as HSiEt3 , HSiMe2 Ph, HSiMePh2 , HSiMe(OSiMe3 )2 , and HSi(OSiMe3 )3 in the presence of catalytic ammounts of the iridium(III) complex [Ir(H)(CF3 CO2 )(NSiN*)(coe)] (1; NSiN*=fac-bis-(4-methylpyridine-2-yloxy); coe=cis-cyclooctene) has been comparatively studied. The activity of the hydrosilylation catalytic system based on 1 depends on the nature of the reducing agent, where HSiMe(OSiMe3 )2 has proven to be the most active. The aforementioned reactions were found to be highly selective toward the formation of the corresponding silylformate. It has been found that using 1 as catalyst precursor above 328â K decreases the activity through a thermally competitive mechanistic pathway. Indeed, the reduction of the ancillary trifluoroacetate ligand to give the corresponding silylether CF3 CH2 OSiR3 has been observed. Moreover, mechanistic studies for the 1-catalyzed CO2 -hydrosilylation reaction based on experimental and theoretical studies suggest that 1 prefers an inner-sphere mechanism for the CO2 reduction, whereas the closely related [Ir(H)(CF3 SO3 )(NSiN)(coe)] catalyst, bearing a triflate instead of trifluoroacetate ligand, follows an outer-sphere mechanism.
RESUMO
A series of rhodium-NSiN complexes (NSiN=bis (pyridine-2-yloxy)methylsilyl fac-coordinated) is reported, including the solid-state structures of [Rh(H)(Cl)(NSiN)(PCy3 )] (Cy=cyclohexane) and [Rh(H)(CF3 SO3 )(NSiN)(coe)] (coe=cis-cyclooctene). The [Rh(H)(CF3 SO3 )(NSiN)(coe)]-catalyzed reaction of acetophenone with silanes performed in an open system was studied. Interestingly, in most of the cases the formation of the corresponding silyl enol ether as major reaction product was observed. However, when the catalytic reactions were performed in closed systems, formation of the corresponding silyl ether was favored. Moreover, theoretical calculations on the reaction of [Rh(H)(CF3 SO3 )(NSiN)(coe)] with HSiMe3 and acetophenone showed that formation of the silyl enol ether is kinetically favored, while the silyl ether is the thermodynamic product. The dehydrogenative silylation entails heterolytic cleavage of the Si-H bond by a metal-ligand cooperative mechanism as the rate-determining step. Silyl transfer from a coordinated trimethylsilyltriflate molecule to the acetophenone followed by proton transfer from the activated acetophenone to the hydride ligand results in the formation of H2 and the corresponding silyl enol ether.
RESUMO
" The 6th EuCheMS Chemistry Congress will take place in Seville in September 2016. EuCheMS represents more than 160 000 chemists from more than 40 member societies. ChemPubSoc Europe is an organization of 16 European chemical societies from 15 countries. These initiatives have contributed significantly to the creation of a European identity for chemistry " Read more in the Editorial by Luisâ A. Oro.
RESUMO
The borrowing hydrogen methodology allows for the use of alcohols as alkylating agents for CC bond forming processes offering significant environmental benefits over traditional approaches. Iridium(I)-cyclooctadiene complexes having a NHC ligand with a O- or N-functionalised wingtip efficiently catalysed the oxidation and ß-alkylation of secondary alcohols with primary alcohols in the presence of a base. The cationic complex [Ir(NCCH3 )(cod)(MeIm(2- methoxybenzyl))][BF4 ] (cod=1,5-cyclooctadiene, MeIm=1-methylimidazolyl) having a rigid O-functionalised wingtip, shows the best catalyst performance in the dehydrogenation of benzyl alcohol in acetone, with an initial turnover frequency (TOF0 ) of 1283â h(-1) , and also in the ß-alkylation of 2-propanol with butan-1-ol, which gives a conversion of 94 % in 10â h with a selectivity of 99 % for heptan-2-ol. We have investigated the full reaction mechanism including the dehydrogenation, the cross-aldol condensation and the hydrogenation step by DFT calculations. Interestingly, these studies revealed the participation of the iridium catalyst in the key step leading to the formation of the new CC bond that involves the reaction of an O-bound enolate generated in the basic medium with the electrophilic aldehyde.
RESUMO
[{Rh(µ-Cl)(H)2 (IPr)}2 ] (IPr = 1,3-bis-(2,6-diisopropylphenyl)imidazole-2-ylidene) was found to be an efficient catalyst for the synthesis of novel propargylamines by a one-pot three-component reaction between primary arylamines, aliphatic aldehydes, and triisopropylsilylacetylene. This methodology offers an efficient synthetic pathway for the preparation of secondary propargylamines derived from aliphatic aldehydes. The reactivity of [{Rh(µ-Cl)(H)2 (IPr)}2 ] with amines and aldehydes was studied, leading to the identification of complexes [RhCl(CO)IPr(MesNH2 )] (MesNH2 = 2,4,6-trimethylaniline) and [RhCl(CO)2 IPr]. The latter shows a very low catalytic activity while the former brought about reaction rates similar to those obtained with [{Rh(µ-Cl)(H)2 (IPr)}2 ]. Besides, complex [RhCl(CO)IPr(MesNH2 )] reacts with an excess of amine and aldehyde to give [RhCl(CO)IPr{MesNCHCH2 CH(CH3 )2 }], which was postulated as the active species. A mechanism that clarifies the scarcely studied catalytic cycle of A3 -coupling reactions is proposed based on reactivity studies and DFT calculations.
RESUMO
A series of neutral and cationic Rh(III) -hydride and Rh(III) -ethyl complexes bearing a NHC ligand has been synthesized and evaluated as catalyst precursors for H/D exchange of styrene using CD(3)OD as a deuterium source. Various ligands have been examined in order to understand how the stereoelectronic properties can modulate the catalytic activity. Most of these complexes proved to be very active and selective in the vinylic H/D exchange, without deuteration at the aromatic positions, displaying very high selectivity toward the ß-positions. In particular, the cationic complex [RhClH(CH(3)CN)(3)(IPr)]CF(3)SO(3) showed excellent catalytic activity, reaching the maximum attainable degree of ß-vinylic deuteration in only 20â min. By modulation of the catalyst structure, we obtained improved α/ß selectivity. Thus, the catalyst [RhClH(κ(2)-O,N-C(9)H(6)NO)(SIPr)], bearing an 8-quinolinolate ligand and a bulky and strongly electron-donating SIPr as the NHC, showed total selectivity for the ß-vinylic positions. This systematic study has shown that increased electron density and steric demand at the metal center can improve both the catalytic activity and selectivity. Complexes bearing ligands with very high steric hindrance, however, proved to be inactive.
Assuntos
Compostos Heterocíclicos/química , Metano/análogos & derivados , Ródio/química , Compostos de Vinila/química , Catálise , Complexos de Coordenação/síntese química , Complexos de Coordenação/química , Cristalografia por Raios X , Deutério/química , Hidrogênio/química , Metano/química , Conformação Molecular , Relação Estrutura-AtividadeRESUMO
The iridium(I) complexes of formula Ir(cod)(SiNP)(+) (1(+)) and IrCl(cod)(SiNP) (2) are easily obtained from the reaction of SiMe2{N(4-C6H4CH3)PPh2}2 (SiNP) with [Ir(cod)(CH3CN)2](+) or [IrCl(cod)]2, respectively. The carbonylation of [1][PF6] affords the cationic pentacoordinated complex [Ir(CO)(cod)(SiNP)](+) (3(+)), while the treatment 2 with CO gives the cation 3(+) as an intermediate, finally affording an equilibrium mixture of IrCl(CO)(SiNP) (4) and the hydride derivative of formula IrHCl(CO)(SiNP-H) (5) resulting from the intramolecular oxidative addition of the C-H bond of the SiCH3 moiety to the iridium(I) center. Furthermore, the prolonged exposure of [3]Cl or 2 to CO resulted in the formation of the iridium(I) pentacoordinated complex Ir(SiNP-H)(CO)2 (6). The unprecedented κ(3)C,P,P' coordination mode of the [SiNP-H] ligand observed in 5 and 6 has been fully characterized in solution by NMR spectroscopy. In addition, the single-crystal X-ray structure of 6 is reported.
RESUMO
The reaction of the 11-vertex rhodathiaborane, [8,8-(PPh3)2-nido-8,7-RhSB9H10] (1), with NH3 affords inmediately the adduct, [8,8,8-(NH3)(PPh3)2-nido-8,7-RhSB9H10] (4). The NH3-Rh interaction induces the labilization of the PPh3 ligands leading to the dissociation product, [8,8-(NH3)(PPh3)-nido-8,7-RhSB9H10] (5), which can then react with another molecule of NH3 to give [8,8,8-(NH3)2(PPh3)-nido-8,7-RhSB9H10] (6). These clusters have been characterized in situ by multielement NMR spectroscopy at different temeperatures. The variable temperature behavior of the system demonstrates that the intermediates 4-6 are in equilibrium, involving ligand exchange processes. On the basis of low intensity signals present in the (1)H NMR spectra of the reaction mixture, some species are tentatively proposed to be the bis- and tris-NH3 ligated clusters, [8,8-(NH3)2-nido-8,7-RhSB9H10] (7) and [8,8,8-(NH3)3-nido-8,7-RhSB9H10] (8). After evaporation of the solvent and the excess of NH3, the system containing species 4-8 regenerates the starting reactant, 1, thus closing a stoichiometric cycle of ammonia addition and loss. After 40 h at room temperature, the reaction of 1 with NH3 gives the hydridorhodathiaborane, [8,8,8-(H)(PPh3)2-nido-8,7-RhSB9H9] (2), as a single product. The reported rhodathiaboranes show reversible H3N-promoted ligand lability, which implies weak Rh-N interactions, leading to a rare case of metal complexes that circumvent "classical" Werner chemistry.
RESUMO
A series of dinuclear pyridine-4-thiolate (4-Spy)-bridged rhodium and iridium compounds [M(µ-4-Spy)(diolef)]2 [diolef = 1,5-cyclooctadiene (cod), M = Rh (1), Ir (2); diolef = 2,5-norbornadiene (nbd), M = Rh (3)] were prepared by the reaction of Li(4-Spy) with the appropriate compound [M(µ-Cl)(diolef)]2 (M = Rh, Ir). The dinuclear compound [Rh(µ-4-Spy)(CO)(PPh3)]2 (4) was obtained by the reaction of [Rh(acac)(CO)(PPh3)] (acac = acetylacetonate) with 4-pySH. Compounds 1-4 were assessed as metalloligands in self-assembly reactions with the cis-blocked acceptors [M(cod)(NCCH3)2](BF4) [M = Rh (a), Ir (b)] and [M(H2O)2(dppp)](OTf)2 [M = Pd (c), Pt (d); dppp = 1,3-bis(diphenylphosphino)propane]. The homometallic hexanuclear metallomacrocycles [{M2(µ-4-Spy)2(cod)2}2{M(cod)}2](BF4)2 (M = Rh [(1a)2], Ir [(2b)2]) and the heterometallic hexanuclear metallomacrocycles [{Rh2(µ-4-Spy)2(cod)2}2{Ir(cod)}2](BF4)2 [(1b)2], [{Rh2(µ-4-Spy)2(cod)2}2{M'(dppp)}2](OTf)4 (M' = Pd [(1c)2], Pt [(1d)2]), and [{Ir2(µ-4-Spy)2(cod)2}2{M'(dppp)}2](OTf)4 (M' = Pd [(2c)2], Pt [(2d)2]) were obtained. NMR spectroscopy in combination with electrospray ionization mass spectrometry was used to elucidate the nature of the metalloligands and their respective supramolecular assemblies. Most of the synthesized species were found to be nonrigid in solution, and their fluxional behavior was studied by variable-temperature (1)H NMR spectroscopy. An X-ray diffraction study of the assemblies (1a)2 and (1d)2 revealed the formation of rectangular (9.6 Å × 6.6 Å) hexanuclear metallomacrocycles with alternating dinuclear (Rh2) and mononuclear (Rh or Pt) corners. The hexanuclear core is supported by four pyridine-4-thiolate linkers, which are bonded through the thiolate moieties to the dinuclear rhodium units, exhibiting a bent-anti arrangement, and through the peripheral pyridinic nitrogen atoms to the mononuclear corners.
RESUMO
In the presence of phosphanes (PR3 ), the amido-bridged trinuclear complex [{Ir(µ-NH2 )(tfbb)}3 ] (tfbb=tetrafluorobenzobarrelene) transforms into mononuclear discrete compounds [Ir(1,2-η(2) -4-κ-C12 H8 F4 N)(PR3 )3 ], which are the products of the CN coupling between the amido moiety and a vinylic carbon of the diolefin. An alternative synthetic approach to these species involves the reaction of the 18 e(-) complex [Ir(Cl)(tfbb)(PMePh2 )2 ] with gaseous ammonia and additional phosphane. DFT studies show that both transformations occur through nucleophilic attack. In the first case the amido moiety attacks a diolefin coordinated to a neighboring molecule following a bimolecular mechanism induced by the highly basic NH2 moiety; the second pathway involves a direct nucleophilic attack of ammonia to a coordinated tfbb molecule.
RESUMO
Forging the lock that autolocks! Rh-NHC catalysts promote a new access to 4 H-quinolizine species from 2-vinylpyridine and terminal and internal alkynes through C-H activation and C-C coupling reactions (see figure). N-Bridgehead heterocycle formation is favored for internal- over terminal-substituted butadienylpyridine derivatives in a thermal 6π-electrocyclization process.
Assuntos
Alcinos/química , Complexos de Coordenação/química , Piridinas/química , Quinolizinas/química , Quinolizinas/síntese química , Ródio/química , Alcinos/síntese química , Catálise , Metano/análogos & derivados , Metano/química , Piridinas/síntese química , EstereoisomerismoRESUMO
The treatment of [1,1-(PR3 )2 -3-(Py)-closo-1,2-RhSB9 H8 ] (PR3 =PMe3 (2) or PPh3 and PMe3 (3); Py=pyridine) with triflic acid (TfOH) affords [1,3-µ-(H)-1,1-(PR3 )2 -3-(Py)-1,2-RhSB9 H8 ](+) (PR3 =PMe3 (4) or PMe3 and PPh3 (5)). These products result from the protonation of the 11-vertex closo-cages along the Rh(1)B(3) edge. These unusual cationic rhodathiaboranes are stable in solution and in the solid state and they have been fully characterized by multinuclear NMR spectroscopy. In addition, compound 5 was characterized by single-crystal X-ray diffraction. One remarkable feature in these structures is the presence of three {Rh(PPh3 )(PMe3 )}-to-{η(n) -SB9 H8 (Py)} (n=4 or 5) conformers in the unit cell, thus giving an uncommon case of conformational isomerism. [1,1-(PPh3 )2 -3-(Py)-closo-1,2-RhSB9 H8 ] (1), that is, the bis-PPh3 -ligated analogue of compounds 2 and 3, is also protonated by TfOH, but, in marked contrast, the resulting cation, [1,3-µ-(H)-1,1-(PPh3 )2 -3-(Py)-1,2-RhSB9 H8 ](+) (6), is attacked by a triflate anion with the release of a PPh3 ligand and the formation of [8,8-(OTf)(PPh3 )-9-(Py)-nido-8,7-RhSB9 H9 ] (9). The result is an equilibrium that involves cationic species 6, neutral OTf-ligated compound 9, and [HPPh3 ](+) , which is formed upon protonation of the released PPh3 ligand. The resulting ionic system reacts readily with H2 to give cationic species [8,8,8-(H)(PPh3 )2 -9-(Py)-nido-8,7-RhSB9 H9 ](+) (7). This reactivity is markedly higher than that previously found for compound 1 and it introduces a new example of proton-assisted H2 activation that occurs on a polyhedral boron-containing compound.
RESUMO
The ß-Z selectivity in the hydrosilylation of terminal alkynes has been hitherto explained by introduction of isomerisation steps in classical mechanisms. DFT calculations and experimental observations on the system [M(I)2{κ-C,C,O,O-(bis-NHC)}]BF4 (M=Ir (3a), Rh (3b); bis-NHC=methylenebis(N-2-methoxyethyl)imidazole-2-ylidene) support a new mechanism, alternative to classical postulations, based on an outer-sphere model. Heterolytic splitting of the silane molecule by the metal centre and acetone (solvent) affords a metal hydride and the oxocarbenium ion [R3Si-O(CH3)2](+), which reacts with the corresponding alkyne in solution to give the silylation product [R3Si-CH=C-R](+). Thus, acetone acts as a silane shuttle by transferring the silyl moiety from the silane to the alkyne. Finally, nucleophilic attack of the hydrido ligand over [R3Si-CH=C-R](+) affords selectively the ß-(Z)-vinylsilane. The ß-Z selectivity is explained on the grounds of the steric interaction between the silyl moiety and the ligand system resulting from the geometry of the approach that leads to ß-(E)-vinylsilanes.
RESUMO
A general regioselective rhodium-catalyzed head-to-tail dimerization of terminal alkynes is presented. The presence of a pyridine ligand (py) in a Rh-N-heterocyclic-carbene (NHC) catalytic system not only dramatically switches the chemoselectivity from alkyne cyclotrimerization to dimerization but also enhances the catalytic activity. Several intermediates have been detected in the catalytic process, including the π-alkyne-coordinated Rh(I) species [RhCl(NHC)(η(2)-HC≡CCH2Ph)(py)] (3) and [RhCl(NHC){η(2)-C(tBu)≡C(E)CH=CHtBu}(py)] (4) and the Rh(III)-hydride-alkynyl species [RhClH{-C≡CSi(Me)3}(IPr)(py)2] (5). Computational DFT studies reveal an operational mechanism consisting of sequential alkyne C-H oxidative addition, alkyne insertion, and reductive elimination. A 2,1-hydrometalation of the alkyne is the more favorable pathway in accordance with a head-to-tail selectivity.
RESUMO
The ready availability of rare parent amido d(8) complexes of the type [{M(µ-NH2)(cod)}2] (M=Rh (1), Ir (2); cod=1,5-cyclooctadiene) through the direct use of gaseous ammonia has allowed the study of their reactivity. Both complexes 1 and 2 exchanged the di-olefines by carbon monoxide to give the dinuclear tetracarbonyl derivatives [{M(µ-NH2)(CO)2}2 ] (M=Rh or Ir). The diiridium(I) complex 2 reacted with chloroalkanes such as CH2Cl2 or CHCl3, giving the diiridium(II) products [(Cl)(cod)Ir(µ-NH2)2Ir(cod)(R)] (R=CH2Cl or CHCl2) as a result of a two-center oxidative addition and concomitant metal-metal bond formation. However, reaction with ClCH2CH2Cl afforded the symmetrical adduct [{Ir(µ-NH2)(Cl)(cod)}2] upon release of ethylene. We found that the rhodium complex 1 exchanged the di-olefines stepwise upon addition of selected phosphanes (PPh3, PMePh2, PMe2Ph) without splitting of the amido bridges, allowing the detection of mixed COD/phosphane dinuclear complexes [(cod)Rh(µ-NH2)2Rh(PR3)2], and finally the isolation of the respective tetraphosphanes [{Rh(µ-NH2)(PR3)2}2]. On the other hand, the iridium complex 2 reacted with PMe2 Ph by splitting the amido bridges and leading to the very rare terminal amido complex [Ir(cod)(NH2)(PMePh2)2]. This compound was found to be very reactive towards traces of water, giving the more stable terminal hydroxo complex [Ir(cod)(OH)(PMePh2)2]. The heterocyclic carbene IPr (IPr=1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) also split the amido bridges in complexes 1 and 2, allowing in the case of iridium to characterize in situ the terminal amido complex [Ir(cod)(IPr)(NH2)]. However, when rhodium was involved, the known hydroxo complex [Rh(cod)(IPr)(OH)] was isolated as final product. On the other hand, we tested complexes 1 and 2 as catalysts in the transfer hydrogenation of acetophenone with iPrOH without the use of any base or in the presence of Cs2CO3, finding that the iridium complex 2 is more active than the rhodium analogue 1.
RESUMO
Reactions of [8,8,8-(H)(PPh(3))(2)-9-(Py)-nido-8,7-RhSB(9)H(9)] (1), [1,1-(PPh(3))(2)-3-(Py)-closo-1,2-RhSB(9)H(8)] (2), and [1,1-(CO)(PPh(3))-3-(Py)-closo-1,2-RhSB(9)H(8)] (4), where Py = Pyridine, with HCl to give the Cl-ligated clusters, [8,8-(Cl)(PPh(3))-9-(Py)-nido-8,7-RhSB(9)H(9)] (3) and [8,8,8-(Cl)(CO)(PPh(3))-9-(Py)-nido-8,7-RhSB(9)H(8)] (5), have recently demonstrated the remarkable nido-to-closo redox flexibility and bifunctional character of this class of 11-vertex rhodathiaboranes. To get a sense of the scope of this chemistry, we report here the reactions of PR(3)-ligated analogues, [8,8,8-(H)(PR(3))(2)-9-(Py)-nido-8,7-RhSB(9)H(9)], where PR(3) = PMePh(2) (6), or PPh(3) and PMe(3) (7); and [1,1-(PR(3))(2)-3-(Py)-closo-1,2-RhSB(9)H(8)], where PR(3) = PPh(3) and PMe(3) (8), PMe(3) (9) or PMe(2)Ph (10), with HCl to give Cl-ligated clusters. The results demonstrate that in contrast to the PPh(3)-ligated compounds, 1, 2, and 3, the reactions with 6-10 are less selective, giving rise to the formation of mixtures that contain monophosphine species, [8,8-(Cl)(PR(3))-9-(Py)-nido-8,7-RhSB(9)H(9)], where PR(3) = PMe(3) (11), PMe(2)Ph (12), or PMePh(2) (15), and bis-ligated derivatives, [8,8,8-(Cl)(PR(3))(2)-9-(Py)-nido-8,7-RhSB(9)H(9)], where PR(3) = PMe(3) (13) or PMe(2)Ph (14). The {RhCl(PR(3))}-containing compounds, 3, 11, 12, and 15, are formally unsaturated 12 skeletal electron pair (sep) clusters with nido-structures. Density functional theory (DFT) calculations demonstrate that the nido-structure is more stable than the predicted closo-isomers. In addition, studies have been carried out that involve the reactivity of 3 with Lewis bases. Thus, it is reported that 3 interacts with MeCN in solution, and it reacts with CO and pyridine to give the corresponding Rh-L adducts, [8,8,8-(Cl)(L)(PPh(3))-9-(Py)-nido-8,7-RhSB(9)H(9)], where L = CO (5) or Py (20). On the other hand, the treatment of 3 and 5 with Proton Sponge (PS) promotes the abstraction of HCl, as [PSH]Cl, from the nido-clusters, and the regeneration of the parent closo-species, completing two new stoichiometric cycles that are driven by Brønsted acid/base chemistry.