RESUMO
We report an end-to-end analytic model for the computation of the figures of nerit (FOMs) of arbitrarily filtered and amplified heterodyne coherent microwave photonics (MWP) links. It is useful for evaluating the performance of complex systems where the final stage is employed for up/down-converting the radio frequency (RF) signal. We apply the model to a specific case of complex system representing the front-haul segment in a 5G link between the central office and the base station. The model can be however applied to a wider range of cases combining fiber and photonic chip elements and thus is expected to provide a useful and fast tool to analyze them in the design stage.
RESUMO
Surface grating couplers are fundamental building blocks for coupling the light between optical fibers and integrated photonic devices. However, the operational bandwidth of conventional grating couplers is intrinsically limited by their wavelength-dependent radiation angle. The few dual-band grating couplers that have been experimentally demonstrated exhibit low coupling efficiencies and rely on complex fabrication processes. Here we demonstrate for the first time, to the best of our knowledge, the realization of an efficient dual-band grating coupler fabricated using 193 nm deep-ultraviolet lithography for 10 Gbit symmetric passive optical networks. The footprint of the device is 17×10µm2. We measured coupling efficiencies of -4.9 and -5.2dB with a 3-dB bandwidth of 27 and 56 nm at the wavelengths of 1270 and 1577 nm, corresponding to the upstream and downstream channels, respectively.
RESUMO
Waveguide Bragg grating filters with narrow bandwidths and high optical rejections are key functions for several advanced silicon photonics circuits. Here, we propose and demonstrate a new, to the best of our knowledge, Bragg grating geometry that provides a narrowband and high rejection response. It combines the advantages of subwavelength and modal engineering. As a proof-of-concept demonstration, we implement the proposed Bragg filters in 220-nm-thick Si technology with a single etch step. We experimentally show flexible control of the filter selectivity, with measured null-to-null bandwidths below 2 nm, and strength of 60 dB rejection with a null-to-null bandwidth of 1.8 nm.
RESUMO
The successful integration of capacitive phase shifters featuring a p-type strained SiGe layer in a 300 mm silicon photonics platform is presented. The phase shift is evaluated with a voltage swing of only 0.9 Vpp, compatible with CMOS technology. A good correlation is shown between the phase shift efficiency from 10 to 60°/mm and the capacitive oxide thickness varying from 15 to 4 nm. Corresponding insertion losses are as low as 3 dB/mm thanks to the development of low loss poly-silicon and to a careful design of the doped layers within the waveguide. The thin SiGe layer brings an additional 20% gain in efficiency due to higher hole efficiency in strained SiGe.
RESUMO
Wideband and polarization-independent wavelength filters with low sensitivity to temperature variations have great potential for wavelength division multiplexing applications. However, simultaneously achieving these metrics is challenging for silicon-on-insulator photonics technology. Here, we harness the reduced index contrast and the low thermo-optic coefficient of silicon nitride to demonstrate waveguide Bragg grating filters with wideband apolar rejection and low thermal sensitivity. Filter birefringence is reduced by judicious design of a triangularly shaped lateral corrugation. Based on this approach, we demonstrate silicon nitride Bragg filters with a measured polarization-independent 40 dB optical rejection with negligible off-band excess loss, and a sensitivity to thermal variations below 20 pm/°C.
RESUMO
Bragg filters stand as key building blocks of the silicon-on-insulator (SOI) photonics platform, allowing the implementation of advanced on-chip signal manipulation. However, achieving narrowband Bragg filters with large rejection levels is often hindered by fabrication constraints and imperfections. Here, we show that the combination of single-side corrugation asymmetry and subwavelength engineering provides a narrowband response with large corrugations, overcoming minimum feature size constraints of conventional Si Bragg filters. We comprehensively study the impact of the corrugation asymmetry in conventional and subwavelength single-etched SOI Bragg filters, showing their potential for bandwidth reduction. Finally, we experimentally demonstrate novel subwavelength geometry based on shifted corrugation teeth, achieving null-to-null bandwidths and rejections of 0.8 nm and 40 dB for the symmetric configuration and 0.6 nm and 15 dB for the asymmetric case.
RESUMO
In this work, a 25 Gb ps silicon push-pull Mach-Zehnder modulator operating in the O-Band (1260 nm - 1360 nm) of optical communications and fabricated on a 300 mm platform is presented. The measured modulation efficiency (VπLπ) was comprised between 0.95 V cm and 1.15 V cm, which is comparable to the state-of-the-art modulators in the C-Band, that enabled its use with a driving voltage of 3.3 Vpp, compatible with BiCMOS technology. An extinction ratio of 5 dB and an on-chip insertion losses of 3.6 dB were then demonstrated at 25 Gb ps.
RESUMO
The high index contrast of the silicon-on-insulator (SOI) platform allows the realization of ultra-compact photonic circuits. However, this high contrast hinders the implementation of narrow-band Bragg filters. These typically require corrugation widths of a few nanometers or double-etch geometries, hampering device fabrication. Here we report, for the first time, to the best of our knowledge, on the realization of SOI Bragg filters based on sub-wavelength index engineering in a differential corrugation width configuration. The proposed double periodicity structure allows narrow-band rejection with a single etch step and relaxed width constraints. Based on this concept, we experimentally demonstrate a single-etch, 220 nm thick, Si Bragg filter featuring a corrugation width of 150 nm, a rejection bandwidth of 1.1 nm, and an extinction ratio exceeding 40 dB. This represents a 10-fold width increase, compared to conventional single-periodicity, single-etch counterparts with similar bandwidths.
RESUMO
Grating couplers enable position-friendly interfacing of silicon chips by optical fibers. The conventional coupler designs call upon comparatively complex architectures to afford efficient light coupling to sub-micron silicon-on-insulator (SOI) waveguides. Conversely, the blazing effect in double-etched gratings provides high coupling efficiency with reduced fabrication intricacy. In this Letter, we demonstrate for the first time, to the best of our knowledge, the realization of an ultra-directional L-shaped grating coupler, seamlessly fabricated by using 193 nm deep-ultraviolet (deep-UV) lithography. We also include a subwavelength index engineered waveguide-to-grating transition that provides an eight-fold reduction of the grating reflectivity, down to 1% (-20 dB). A measured coupling efficiency of -2.7 dB (54%) is achieved, with a bandwidth of 62 nm. These results open promising prospects for the implementation of efficient, robust, and cost-effective coupling interfaces for sub-micrometric SOI waveguides, as desired for large-volume applications in silicon photonics.
RESUMO
A broad transparency range of its constituent materials and compatibility with standard fabrication processes make germanium-on-silicon (Ge-on-Si) an excellent platform for the realization of mid-infrared photonic circuits. However, the comparatively large Ge waveguide thickness and its moderate refractive index contrast with the Si substrate hinder the implementation of efficient fiber-chip grating couplers. We report for the first time, to the best of our knowledge, a single-etch Ge-on-Si grating coupler with an inversely tapered access stage, operating at a 3.8 µm wavelength. Optimized grating excitation yields a coupling efficiency of -11 dB (7.9%), the highest value reported for a mid-infrared Ge-on-Si grating coupler, with reflectivity below -15 dB (3.2%). The large periodicity of our higher-order grating design substantially relaxes the fabrication constraints. We also demonstrate that a focusing geometry allows a 10-fold reduction in inverse taper length, from 500 to 50 µm.
RESUMO
The integration of germanium (Ge)-rich active devices in photonic integrated circuits is challenging due to the lattice mismatch between silicon (Si) and Ge. A new Ge-rich silicon-germanium (SiGe) waveguide on graded buffer was investigated as a platform for integrated photonic circuits. At a wavelength of 1550 nm, low loss bends with radii as low as 12 µm and Multimode Interferometer beam splitter based on Ge-rich SiGe waveguide on graded buffer were designed, fabricated and characterized. A Mach Zehnder interferometer exhibiting a contrast of more than 10 dB has been demonstrated.
RESUMO
We explore, to the best of our knowledge, the potential of diffractionless subwavelength grating waveguides for sensing applications. We show that by subwavelength patterning of silicon-wire waveguides the field delocalization can be engineered to increase the sensitivity. Fully vectorial 3D-FDTD simulations confirm the sensitivity enhancement, achieving sensitivities of 0.83 RIU/RIU and 1.5·10(-3) RIU/nm for bulk and surface sensing, respectively, which compare favorably to state-of-the-art sensing waveguides.
Assuntos
Radiometria/instrumentação , Refratometria/instrumentação , Silício/química , Ressonância de Plasmônio de Superfície/instrumentação , Condutividade Elétrica , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Miniaturização , Espalhamento de Radiação , TransdutoresRESUMO
A general-purpose photonic processor can be built integrating a silicon photonic programmable core in a technology stack comprising an electronic monitoring and controlling layer and a software layer for resource control and programming. This processor can leverage the unique properties of photonics in terms of ultra-high bandwidth, high-speed operation, and low power consumption while operating in a complementary and synergistic way with electronic processors. These features are key in applications such as next-generation 5/6 G wireless systems where reconfigurable filtering, frequency conversion, arbitrary waveform generation, and beamforming are currently provided by microwave photonic subsystems that cannot be scaled down. Here we report the first general-purpose programmable processor with the remarkable capability to implement all the required basic functionalities of a microwave photonic system by suitable programming of its resources. The processor is fabricated in silicon photonics and incorporates the full photonic/electronic and software stack.
RESUMO
Sub-wavelength grating (SWG) metamaterials have garnered a great interest for their singular capability to shape the propagation of light. However, practical SWG implementations are limited by fabrication constraints, such as minimum feature size. Here, we present a new nanophotonic waveguide grating concept that exploits phase-matching engineering to suppress diffraction effects for a period three times larger than those with SWG approaches. This long-period grating not only facilitates fabrication, but also enables a new diffraction-less regime with additional degrees of freedom to control light propagation. More specifically, the proposed phase-matching engineering enables selective diffraction suppression, providing new tools to shape propagation in the grating. We harness this flexible diffraction control to yield single-mode propagation in, otherwise, highly multimode waveguides, and to implement Bragg filters that combine highly-diffractive and diffraction-less regions to dramatically increase light rejection. Capitalizing on this new concept, we experimentally demonstrate a Si membrane Bragg filter with record rejection value exceeding 60 dB. These results demonstrate the potential of the proposed long-period grating for the engineering of diffraction in nanophotonic waveguides and pave the way for the development of a new generation of high-performance Si photonics devices.