Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 36
Filtrar
1.
Chem Rev ; 123(5): 1889-1924, 2023 Mar 08.
Artigo em Inglês | MEDLINE | ID: mdl-36535040

RESUMO

Wood is a renewable resource with excellent qualities and the potential to become a key element of a future bioeconomy. The increasing environmental awareness and drive to achieve sustainability is leading to a resurgence of research on wood materials. Nevertheless, the global climate changes and associated consequences will soon challenge the wood-value chains in several regions (e.g., central Europe). To cope with these challenges, it is necessary to rethink the current practice of wood sourcing and transformation. The goal of this review is to address the intrinsic natural diversity of wood, from its origin to its technological consequences for the present and future manufacturing of wood products. So far, industrial processes have been optimized to repress the variability of wood properties, enabling more efficient processing and production of reliable products. However, the need to preserve biodiversity and the impact of climate change on forests call for new wood processing techniques and green chemistry protocols for wood modification as enabling factors necessary for managing a more diverse wood provision in the future. This article discusses the past developments that have resulted in the current wood value chains and provides a perspective about how natural variability could be turned into an asset for making truly sustainable wood products. After briefly introducing the chemical and structural complexity of wood, the methods conventionally adopted for industrial homogenization and modification of wood are discussed in relation to their evolution toward increased sustainability. Finally, a perspective is given on technological potentials of machine learning techniques and of novel functional wood materials. Here the main message is that through a combination of sustainable forestry, adherence to green chemistry principles and adapted processes based on machine learning, the wood industry could not only overcome current challenges but also thrive in the near future despite the awaiting challenges.

2.
Chem Rev ; 123(5): 1843-1888, 2023 Mar 08.
Artigo em Inglês | MEDLINE | ID: mdl-36260771

RESUMO

The building sector, including building operations and materials, was responsible for the emission of ∼11.9 gigatons of global energy-related CO2 in 2020, accounting for 37% of the total CO2 emissions, the largest share among different sectors. Lowering the carbon footprint of buildings requires the development of carbon-storage materials as well as novel designs that could enable multifunctional components to achieve widespread applications. Wood is one of the most abundant biomaterials on Earth and has been used for construction historically. Recent research breakthroughs on advanced engineered wood products epitomize this material's tremendous yet largely untapped potential for addressing global sustainability challenges. In this review, we explore recent developments in chemically modified wood that will produce a new generation of engineered wood products for building applications. Traditionally, engineered wood products have primarily had a structural purpose, but this review broadens the classification to encompass more aspects of building performance. We begin by providing multiscale design principles of wood products from a computational point of view, followed by discussion of the chemical modifications and structural engineering methods used to modify wood in terms of its mechanical, thermal, optical, and energy-related performance. Additionally, we explore life cycle assessment and techno-economic analysis tools for guiding future research toward environmentally friendly and economically feasible directions for engineered wood products. Finally, this review highlights the current challenges and perspectives on future directions in this research field. By leveraging these new wood-based technologies and analysis tools for the fabrication of carbon-storage materials, it is possible to design sustainable and carbon-negative buildings, which could have a significant impact on mitigating climate change.

3.
Small ; : e2405558, 2024 Sep 16.
Artigo em Inglês | MEDLINE | ID: mdl-39279332

RESUMO

The transition to sustainable materials and eco-efficient processes in commercial electronics is a driving force in developing green electronics. Iron-catalyzed laser-induced graphitization (IC-LIG) has been demonstrated as a promising approach for rendering biomaterials electrically conductive. To optimize the IC-LIG process and fully exploit its potential for future green electronics, it is crucial to gain deeper insights into its catalyzation mechanism and structural evolution. However, this is challenging due to the rapid nature of the laser-induced graphitization process. Therefore, multiscale preparation techniques, including ultramicrotomy of the cross-sectional transition zone from precursor to fully graphitized IC-LIG electrode, are employed to virtually freeze the IC-LIG process in time. Complementary characterization is performed to generate a 3D model that integrates nanoscale findings within a mesoscopic framework. This enabled tracing the growth and migration behavior of catalytic iron nanoparticles and their role during the catalytic laser-graphitization process. A three-layered arrangement of the IC-LIG electrode is identified including a highly graphitized top layer with an interplanar spacing of 0.343 nm. The middle layer contained γ-iron nanoparticles encapsulated in graphitic shells. A comparison with catalyst-free laser graphitization approaches highlights the unique opportunities that IC-LIG offers and discuss potential applications in energy storage devices, catalysts, sensors, and beyond.

4.
Soft Matter ; 20(31): 6092-6102, 2024 Aug 07.
Artigo em Inglês | MEDLINE | ID: mdl-39027927

RESUMO

Coupling nonlinear reaction networks with soft matter building blocks holds great potential for the design of life-mimicking, time-programmable dissipative self-assembly systems. In this regard, clock reactions are especially useful triggers since they allow to autonomously generate in situ chemical stimuli such as pH changes. The methylene glycol-sulfite (MGS) is a well-known acid-to-base pH-clock reaction which is able to produce sharp and intense pH jumps (up to 5 pH units) after a reliable, yet relatively short (tens of seconds rather than minutes), induction time. Here, after an introductory discussion on the main chemical aspects of MGS and MGS-based systems, their applications for the time-programming of soft matter will be showcased - from micelles, vesicles, and droplets to supramolecular aggregates, polymers and gels. Hopefully, this will help attracting more attention and foster research on the broader field of materials programming with chemical reaction networks.

5.
Soft Matter ; 17(5): 1189-1193, 2021 Feb 15.
Artigo em Inglês | MEDLINE | ID: mdl-33533787

RESUMO

Programming supramolecular assembly in the time domain is a fundamental aspect of the design of biomimetic materials. We achieved the time-controlled sol-gel transition of a poly(vinyl alcohol)-iodine supramolecular complex by generating iodine in situ with a clock reaction. We demonstrate that both the gelation time and the mechanical properties of the resulting hydrogel can be tuned by properly selecting the clock parameters or through competitive iodine complexation.

6.
Soft Matter ; 17(23): 5772-5779, 2021 Jun 16.
Artigo em Inglês | MEDLINE | ID: mdl-34027537

RESUMO

Structural colors are produced by wavelength-dependent scattering of light from nanostructures. While living organisms often exploit phase separation to directly assemble structurally colored materials from macromolecules, synthetic structural colors are typically produced in a two-step process involving the sequential synthesis and assembly of building blocks. Phase separation is attractive for its simplicity, but applications are limited due to a lack of robust methods for its control. A central challenge is to arrest phase separation at the desired length scale. Here, we show that solid-state polymerization-induced phase separation can produce stable structures at optical length scales. In this process, a polymeric solid is swollen and softened with a second monomer. During its polymerization, the two polymers become immiscible and phase separate. As free monomer is depleted, the host matrix resolidifies and arrests coarsening. The resulting polymeric composites have a blue or white appearance. We compare these biomimetic nanostructures to those in structurally-colored feather barbs, and demonstrate the flexibility of this approach by producing structural color in filaments and large sheets.


Assuntos
Plumas , Nanoestruturas , Animais , Cor , Polimerização , Polímeros
7.
Soft Matter ; 16(3): 591-594, 2020 Jan 22.
Artigo em Inglês | MEDLINE | ID: mdl-31859330

RESUMO

Self-regulating materials require embedded control systems. Active networks of enzymes fulfill this function in living organisms, and the development of chemical controls for synthetic systems is still in its infancy. While previous work has focused on enzymatic controls, small-molecule networks have unexplored potential. We describe a simple small-molecule network that is able to produce transient pH cycles with tunable lagtimes and lifetimes, based on coupling the acid-to-alkali methylene glycol-sulfite reaction to 1,3-propanesultone, a slow acid generator. Applied to transient pH-driven supramolecular self-assembly of a perylene diimide, our system matches the flexibility of in vitro enzymatic systems, including the ability to perform repeated cycles of assembly and disassembly.

8.
Macromol Rapid Commun ; 40(21): e1900360, 2019 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-31523877

RESUMO

The fluorescent dye 8-hydroxypyrene-1,3,6-trisulfonate (pyranine) combines high photostability with ratiometric pH detection in the physiological range, making it a prime candidate for optical sensors in biomedical applications, such as pH-based chronic wound monitoring. However, pyranine's high water solubility and the difficulty of covalent attachment pose severe limitations in terms of leaching from sensor matrices. Herein, pyranine-modified nanophase-separated amphiphilic polymer conetworks (APCNs) are reported as fluorescent ratiometric pH sensors. The thin, freestanding APCN membranes composed of one hydrophilic and one hydrophobic polymer provide an optically transparent, flexible, and stable ideal matrix that enables contact between dye and aqueous environment. An active ester-based conjugation approach results in a highly homogeneous and stable pyranine modification of the APCN's hydrophilic phase. This concept effectively solves the leaching challenge for pyranine without compromising its functionality, which is demonstrated by ratiometric pH detection in the range of pH 5-9.


Assuntos
Sulfonatos de Arila/química , Corantes Fluorescentes/química , Polímeros/química , Tensoativos/química , Concentração de Íons de Hidrogênio , Estrutura Molecular , Tamanho da Partícula , Propriedades de Superfície
9.
Chaos ; 29(7): 071102, 2019 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-31370427

RESUMO

Acid generators, such as cyclic esters, have recently emerged as powerful modulators of clock reactions. Here, we show that a transient pH burst emerges when δ-gluconolactone is coupled to the chlorite-iodide reaction. The timing and strength of the bursts depend on the concentration of the cyclic ester and can be further modulated by sequestration of iodine by tetrabutylammonium cations or α-cyclodextrin. These findings could be useful for the design of new, transient pH- and complexation-driven self-assembly systems, as well as for analytical purposes.

10.
Soft Matter ; 14(31): 6415-6418, 2018 Aug 21.
Artigo em Inglês | MEDLINE | ID: mdl-30062339

RESUMO

Clock reactions allow precise control of chemical composition in the time domain. Such nonlinear chemical systems have recently been introduced to mimic the self-assembly pathways common in living organisms. Here, we demonstrate the use of a clock reaction to trigger the formation of polymeric nanoparticles. By adjusting the delay of a formaldehyde clock reaction, we controlled the precipitation of chitosan to form particles with sizes tunable in a wide range (from about 200 to 600 nm diameter). The chemical structure of chitosan was not significantly perturbed by the clock reagents.

11.
Nanotechnology ; 28(39): 395302, 2017 Sep 29.
Artigo em Inglês | MEDLINE | ID: mdl-28726677

RESUMO

Patterning of functional surfaces is one of the cornerstones of nanotechnology as it allows the fabrication of sensors and lab-on-a-chip devices. Here, the patterning of self-assembled monolayers of branched poly(ethyleneimine) (bPEI) on silica was achieved by means of remote photocatalytic lithography. Moreover, when 2-bromoisobutyryl-modified bPEI was used, the resulting pattern could be amplified by grafting polymer brushes by means of surface-initiated atom transfer radical polymerization. In contrast to previous reports for the patterning of bPEI, the present approach can be conducted in minutes instead of hours, reducing the exposure time to UV radiation and enhancing the overall efficiency. Furthermore, our approach is much more user-friendly, allowing a facile fabrication of patterned initiator-modified surfaces and the use of inexpensive instrumentation such as a low-power UV source and a simple photomask. Considering the versatility of bPEI as a scaffold for the development of biosensors, patterning by means of remote photocatalytic lithography will open new opportunities in a broad field of applications.

12.
Nanotechnology ; 28(15): 155302, 2017 Apr 18.
Artigo em Inglês | MEDLINE | ID: mdl-28301332

RESUMO

The controlled shaping of nanoparticles' morphology is one of the pillars of nanotechnology. Here, we demonstrate that photocatalytic lithography, a technique already proved to be useful in materials science, can act as a dry etching technique for noble metal nanoparticles. Triangular silver nanoprisms are self-assembled on titanium dioxide films and photocatalytically shaped into discoidal particles upon irradiation with near-UV light. The obtained patterned surfaces show a dramatically different surface-enhanced Raman scattering response, suggesting the utility of our approach for the development of sensors. The photocatalytic nature of the particle shaping is demonstrated and a plausible mechanism drawn by performing photocatalysis in different configurations (direct and remote) and by irradiating in different solvents.

13.
Chimia (Aarau) ; 71(6): 354-358, 2017 Jun 28.
Artigo em Inglês | MEDLINE | ID: mdl-28662738

RESUMO

Polymer brushes are dense arrays of macromolecular chains tethered by one end at a surface. They are at the cutting edge of polymer nanotechnology since the dawn of controlled surface-initiated polymerization techniques unlocked new prospects for the synthesis of polymer brushes with tailorable properties. More recently, thanks to the growing interest in the use of brushes for the generation of functional surfaces, the need for advanced patterning and characterization approaches rapidly increased. Meeting these needs requires the contribution of experts from different disciplines: polymer chemistry, surface science, electrochemistry and particle physics. The focus of this review is to highlight recent developments in the field of polymer brushes, specifically the application of photocatalytic lithography as a versatile patterning strategy, the study of grafted-from polymer brushes by electrochemical methods and, most importantly, the introduction of positron annihilation spectroscopy as a powerful technique for the investigation of the structure of polymer brushes and of their composites with nanoparticles.

14.
Nanotechnology ; 27(2): 02LT03, 2016 Jan 15.
Artigo em Inglês | MEDLINE | ID: mdl-26630081

RESUMO

Nanoparticle-loaded polymer brushes are powerful tools for the development of innovative devices. However, their characterization is challenging and arrays of different techniques are typically required to gain sufficient insight. Here we demonstrate for the first time the suitability of positron annihilation spectroscopy (PAS) to investigate, with unprecedented detail and without making the least damage to samples, the physico-chemical changes experienced by pH-responsive polymer brushes after protonation and after loading of silver nanoparticles. One of the most important findings is the depth profiling of silver nanoparticles inside the brushes. These results open up a completely new way to understand the structure and behavior of such complex systems.

15.
Anal Bioanal Chem ; 408(26): 7339-49, 2016 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-27074780

RESUMO

A composite electrode with a sandwich structure combining the properties of silver nanoparticles and a titania photoactive layer was used for the electroanalytical detection, by differential pulse voltammetry, of three neurotransmitters: dopamine, norepinephrine, and serotonin. The three analytes were determined at low detection limits (around 0.03 µM) also in the presence of conventional interferents, such as uric and ascorbic acids. The fouling of the electrode surface was overcome by irradiating the device with UVA light, restoring the initial sensor sensitivity. Dopamine, norepinephrine, and serotonin were determined also in simulated biological matrices: liquor (artificially reproduced cerebrospinal fluid) and serum. Moreover, the contemporaneous detection of dopamine and norepinephrine in simulated human urine solutions was also demonstrated, representing the first step towards clinical applications of the proposed methodology. Graphical abstract The photo-renewable electroanalytical sensor.


Assuntos
Dopamina/análise , Técnicas Eletroquímicas/métodos , Neurotransmissores/análise , Norepinefrina/análise , Serotonina/análise , Dopamina/sangue , Dopamina/líquido cefalorraquidiano , Dopamina/urina , Técnicas Eletroquímicas/instrumentação , Eletrodos , Humanos , Limite de Detecção , Nanopartículas Metálicas/química , Neurotransmissores/sangue , Neurotransmissores/líquido cefalorraquidiano , Neurotransmissores/urina , Norepinefrina/sangue , Norepinefrina/líquido cefalorraquidiano , Norepinefrina/urina , Serotonina/sangue , Serotonina/líquido cefalorraquidiano , Serotonina/urina , Prata/química
16.
Analyst ; 140(5): 1486-94, 2015 Mar 07.
Artigo em Inglês | MEDLINE | ID: mdl-25620202

RESUMO

Fouling and passivation are the major drawbacks for a wide applicability of electroanalytical sensors based on nanomaterials, especially in biomedical and environmental fields. The production of highly engineered devices, designed ad hoc for specific applications, is the key factor in the direction of overcoming the problem and accessing effective sensors. Here, the fine-tuning of the system, composed of a highly ordered distribution of silver nanoparticles between a bottom silica and a top titania layer, confers multifunctional properties to the device for a biomedical complex challenge: dopamine detection. The crucial importance of each component towards a robust and efficient electroanalytical system is studied. The total recovery of the electrode performance after a simple UV-A cleaning step (self-cleaning), due to the photoactive interface and the aging resistance, is deeply investigated.


Assuntos
Técnicas Biossensoriais/instrumentação , Dopamina/análise , Eletroquímica/métodos , Eletrodos , Nanopartículas Metálicas/química , Nanotecnologia/instrumentação , Prata/química , Titânio/química , Raios Ultravioleta , Difração de Raios X
17.
Chimia (Aarau) ; 74(1): 67, 2020 Feb 26.
Artigo em Inglês | MEDLINE | ID: mdl-32200792
18.
Carbohydr Polym ; 339: 122166, 2024 Sep 01.
Artigo em Inglês | MEDLINE | ID: mdl-38823895

RESUMO

Wood materials incorporating new properties are of great interest, especially for advanced applications such as sustainable optics and photonics. In this work we describe a wood functionalization approach, comprising the incorporation of artificial chemiluminescent systems (phenyl oxalate ester­hydrogen peroxide-fluorophore, and luminol-ferricyanide), resulting in light-emitting wood. By a detailed characterisation of the light emission features we point out the complex interaction between wood scaffold and chemiluminescent systems, especially the quenching effect of wood extractives (for the TCPO-H2O2-fluorophore system) and lignin (for the luminol-ferricyanide system). Moreover, we take advantage of the intrinsic anisotropic porosity and capillarity of wood tissue to study the chemiluminescent front propagation. Our results may inspire the development of novel light-emitting wood materials for a variety of applications, from fundamental studies of water uptake in wood to sensors and even design elements.

19.
Nanoscale Adv ; 5(8): 2175-2179, 2023 Apr 11.
Artigo em Inglês | MEDLINE | ID: mdl-37056627

RESUMO

The addition of silver(i) ions to the methylene glycol-sulphite (MGS) clock reaction results in the sudden formation of metallic silver nanoparticles. Stable suspensions are obtained in the presence of poly(vinylpyrrolidone). The time delay before the appearance of the particles, as well as their size, decreases with the initial methylene glycol concentration while their monodispersity increases.

20.
Mater Horiz ; 10(1): 257-267, 2023 01 03.
Artigo em Inglês | MEDLINE | ID: mdl-36409220

RESUMO

Buildings are significant end-users of global energy. About 20% of the energy consumption worldwide is used for maintaining a comfortable indoor climate. Therefore, passive systems for indoor temperature and humidity regulation that can respond to environmental changes are very promising to reduce buildings' energy consumption. We developed a process to improve the responsiveness of wood to humidity changes by laser-drilling microscopic holes and incorporating a hygroscopic salt (calcium chloride). The resulting "transpiring wood" displays superior water adsorption capacity and high moisture exchange rate, allowing regulation of humidity and temperature by the exchange of moisture with the surrounding air. We proved that the hygrothermal performance of transpiring wood can be used to regulate indoor climate, with associated energy savings, for various climate types, thus favoring its application in the building sector. The reduction of temperature fluctuations, thanks to the buffering of temperature peaks, can lead to an indirect energy saving of about 10% for cooling and between 4-27% for heating depending on the climate. Furthermore, our transpiring wood meets different sustainability criteria, from raw materials to the fabrication process, resulting in a product with a low overall environmental impact and that is easy to recycle.


Assuntos
Conservação de Recursos Energéticos , Madeira , Conservação de Recursos Energéticos/métodos , Clima , Temperatura , Temperatura Baixa
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA