Hair Growth Effect of DN106212 in C57BL/6 Mouse and Its Network Pharmacological Mechanism of Action.

Centipeda minima (CMX) has been widely investigated using network pharmacology and clinical studies for its effects on hair growth via the JAK/STAT signaling pathway. Human hair follicle papilla cells exhibit hair regrowth through the expression of Wnt signaling-related proteins. However, the mechanism of action of CMX in animals has not been elucidated fully. This study examined the effect of induced hair loss and its side-effects on the skin, and observed the mechanism of action of an alcoholic extract of CMX (DN106212) on C57BL/6 mice. Our results showed that DN106212 was more effective in promoting hair growth than dimethyl sulfoxide in the negative control and tofacitinib (TF) in the positive control when mice were treated with DN106212 for 16 days. We confirmed that DN106212 promotes the formation of mature hair follicles through hematoxylin and eosin staining. We also found that the expression of vascular endothelial growth factor (Vegfa), insulin-like growth factor 1 (Igf1), and transforming growth factor beta 1 (Tgfb1) is related to hair growth using PCR. DN106212-treated mice had significantly higher expression of Vegfa and Igf1 than TF-treated ones, and inhibiting the expression of Tgfb1 had similar effects as TF treatment. In conclusion, we propose that DN106212 increases the expression of hair growth factors, promotes the development of hair follicles, and promotes hair growth. Although additional experiments are needed, DN106212 may serve as an experimental basis for research on natural hair growth-promoting agents.

Characterization of Channeling Effects Applied to Extended-Release Matrix Tablets Containing Pirfenidone.

Pirfenidone (PRF) is an anti-fibrotic agent that has been approved by the Food and Drug Administration (FDA) for the treatment of mild to moderate idiopathic pulmonary fibrosis. However, the current oral administration dosing regimen of PRF is complex and requires high doses. Patients are instructed to take PRF three times daily, with each dose consisting of up to three capsules or tablets (600 mg/d or 1.8 g/d of PRF) taken with food. To improve the dosing regimen, efforts are being made to develop an extended-release tablet with a zero-order release pattern. In this study, two types of extended-release matrix tablets were compared: non-channeled extended-release matrix tablets (NChMT) and channeled extended-release matrix tablets (ChMT). In vitro release tests, swelling and erosion index, rheology studies, and X-ray microcomputed tomography (XRCT), were conducted. The results indicated that ChMT maintained a zero-order release pattern with a constant release rate, while NChMT exhibited a decreased release rate in the latter half of the dissolution. ChMT exhibited accelerated swelling and erosion compared to other formulations, and this was made possible by the presence of channels within the tablet. These channels allowed for thorough wetting and swelling throughout the entire depth of the tablet. The formation of channels was confirmed through XRCT images. In conclusion, the presence of channels in ChMT tablets increased the rate of swelling and erosion, resulting in a zero-order release pattern. This development offers the potential to improve the dosage of PRF and reduce its associated side effects.

Iatrogenic Ankle Charcot Neuropathic Arthropathy after Spinal Surgery: A Case Report and Literature Review.

Charcot neuropathic arthropathy is a relatively rare, chronic disease that leads to joint destruction and reduced quality of life of patients. Early diagnosis of Charcot arthropathy is essential for a good outcome. However, the diagnosis is often based on the clinical course and longitudinal follow-up of patients is required. Charcot arthropathy is suspected in patients with suggestive symptoms and an underlying etiology. Failed spinal surgery is not a known cause of Charcot arthropathy. Herein we report a patient with ankle Charcot neuropathic arthropathy that developed after failed spinal surgery. A 58-year-old man presented to the emergency room due to painful swelling of the left ankle for 2 weeks that developed spontaneously. He underwent spinal surgery 8 years ago that was associated with nerve damage, which led to weakness of great toe extension and ankle dorsiflexion, and sensory loss below the knee. CT and T2-weighted sagittal MRI showed a fine erosive lesion, subluxation, sclerosis, fragmentation, and large bone defects. Based on the patient's history and radiological findings, Charcot arthropathy was diagnosed. However, the abnormal blood parameters, positive blood cultures, and severe pain despite the decreased sensation suggested a diagnosis of septic arthritis. Therefore, diagnostic arthroscopy was performed. The ankle joint exhibited continued destruction after the initial surgery. Consequently, several repeat surgeries were performed over the next 2 years. Despite the early diagnosis and treatment of Charcot arthropathy, the destruction of the ankle joint continued. Given the chronic disease course and poor prognosis of Charcot arthropathy, it is essential to consider this diagnosis in patients with neuropathy.

Preparation and characterization of metformin hydrochloride controlled-release tablet using fatty acid coated granules.

Metformin hydrochloride (MFM) is often used as a controlled-release (CR) tablet to reduce dosing frequency. However, the MFM CR tablet contains significant amounts of excipients and the tablet size is also large. Dosing convenience and patient compliance can be increased by reducing the size of the CR tablets. The aim of this study was to prepare and evaluate the MFM controlled-release tablet (MFM-CRT) using two types of release modulators, inner and outer. The MFM-CRT was prepared by coating the MFM granules using a binder solution containing aluminum stearate (ALS) as the inner release-modulator, and polyethylene oxide (PEO) as the outer release-modulator. The dispersion stability of the binder solution was optimized by the dispersion analyzer. The MFM-CRT was evaluated for dissolution rate and tablet volume. Additionally, dissolution behavior and dissolution kinetics of the MFM-CRT were analyzed using micro-computed tomography (micro-CT). Although the optimal MFM-CRT showed no difference in the release rate as compared to the commercially available product of Glucophage® XR 500 mg (f2 value: 72), the length of the long axis was reduced by 6 mm and the weight was reduced by about 27%. We expect patient compliance to improve because of effective sustained release and volume reduction of MFM-CRT.

Mid-term follow-up results of calcaneal reconstruction for calcaneal malunion.

BACKGROUND: We hypothesized that calcaneal reconstruction can relieve chronic pain due to calcaneal malunion. We report the mid-term follow-up results of calcaneal reconstruction for calcaneal malunion. METHODS: We reviewed the records of 10 male patients (10 ft) who underwent calcaneal reconstruction for calcaneal malunion between January 2009 and July 2014 at the mid-term follow-up. Talocalcaneal height and angle, calcaneal pitch, calcaneal width, Böhler angle, Stephens classification, and Zwipp classification were evaluated by three orthopedic doctors at each visit (pre-reconstruction, post-reconstruction, and at the last follow-up). RESULTS: The mean follow-up period was 67.1 months (range, 48-101 months). The sites of pain before reconstruction were lateral aspect (4 patients), plantar aspect (3 patients), diffuse pain (2 patients), and anterior aspect (1 patient). There was a significant difference in talocalcaneal height, talocalcaneal angle, calcaneal pitch, calcaneal width, and Böhler angle before and after reconstruction (p < 0.05). There was no significant difference between reconstruction and the last follow-up. Radiological measurement agreement was calculated to be moderate to strong (intraclass correlation coefficient: 0.659-0.988). Mean American Orthopedic Foot & Ankle Society Ankle and Hindfoot score improved from 66.50 ± 9.37 pre-reconstruction to 80.30 ± 8.52 at the last follow-up (p < 0.05). The mean visual analog scale score improved from 8.60 ± 1.43 before reconstruction to 3.40 ± 0.84 at the last follow-up (p < 0.05). Most patients were satisfied with the outcome postoperatively. CONCLUSIONS: Our results showed substantial improvement in the clinical and radiological outcomes after calcaneal reconstruction of calcaneal malunion. This outcome was maintained until the mid-term follow-up. Therefore, calcaneal reconstruction may be a good option for the treatment of chronic pain caused by the malunion of a calcaneal fracture without severe subtalar arthritis. Further prospective studies are needed to test this theory. LEVEL OF EVIDENCE: Level IV, Retrospective Case Series.

Preparation and optimization of glyceryl behenate-based highly porous pellets containing cilostazol.

The aim of this study was to prepare a highly porous multiparticulate dosage form containing cilostazol for gastroretentive drug delivery. The floating pellets were prepared with glyceryl behenate as a matrix former and camphor as a sublimating agent by extrusion/spheronization and sublimation under vacuum. Granules prepared with sublimation at 60 °C displayed a slower dissolution rate and smoother surface morphology than those prepared at lower temperatures. This was unexpected as the reported melting point of glyceryl behenate is higher than 69 °C. The DSC study revealed that melting began at a lower temperature owing to the multicomponent property of glyceryl behenate, which led to a sintering effect. The prepared pellets were spherical with unimodal size distribution. They also had porous structures with increased porosity, which led to immediate buoyancy. As cilostazol is a hydrophobic drug that has an erosion-based release mechanism, drug release profile was highly correlated with the percentage of disintegrated pellets. Various excipients were added to the glyceryl behenate-based formulation to increase the floating duration. When hydroxyethyl cellulose was added to the glyceryl behenate-based pellets, acceptable dissolution rate and buoyancy were acquired. This system could potentially be used for gastroretentive delivery of various hydrophobic drugs, which was generally considered difficult.

Preparation and characterization of adefovir dipivoxil-stearic acid cocrystal with enhanced physicochemical properties.

The objectives of this study were to prepare cocrystal composed of adefovir dipivoxil (AD) and stearic acid (SA) and to investigate the enhanced properties of the cocrystal. The cocrystal was prepared by antisolvent precipitation and characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRPD), and differential scanning calorimetry (DSC). The enhanced properties were evaluated by dissolution testing, permeability studies, and powder rheology analysis. The AD raw material has a cuboid-like crystal and the cocrystal has a needle shape. In the FT-IR study, there were bathochromic shifts caused by the hydrogen bonding. The melting point of the cocrystal was 52.9 °C, which was lower than that of AD. The XRPD pattern also had distinct differences, supporting the formation of a new crystalline form. The cocrystal showed changes in the lattice energy and the solvation strength, which caused an enhanced dissolution. The permeability was increased due to the SA, which acts as a P-gp inhibitor. The tabletability was enhanced due to the altered crystal habit. In conclusion, cocrystal containing AD and SA was successfully prepared, presenting advantages such as enhanced solubility, tabletability, and permeability. The use of the cocrystal is a desirable approach for the improved physicochemical properties.

Implementation of Quality by Design for Formulation of Rebamipide Gastro-retentive Tablet.

The purpose of the present study was to develop a rebamipide (RBM) gastro-retentive (GR) tablet by implementing quality by design (QbD). RBM GR tablets were prepared using a sublimation method. Quality target product profile (QTPP) and critical quality attributes (CQAs) of the RBM GR tablets were defined according to the preliminary studies. Factors affecting the CQAs were prioritized using failure mode and effects analysis (FMEA). Design space and optimum formulation were established through a mixture design. The validity of the design space was confirmed using runs within the area. The QTPP of the RBM GR tablets was the orally administered GR tablet containing 300 mg of RBM taken once daily. Based on the QTPP, dissolution rate, tablet friability, and floating property were chosen as CQAs. According to the risk assessment, the amount of sustained-release agent, sublimating material, and diluent showed high-risk priority number (RPN) values above 40. Based on the RPN, these factors were further investigated using mixture design methodology. Design space of formulations was depicted as an overlaid contour plot and the optimum formulation to satisfy the desired responses was obtained by determining the expected value of each response. The similarity factor (f2) of the release profile between predicted response and experimental response was 89.463, suggesting that two release profiles are similar. The validity of the design space was also confirmed. Consequently, we were able to develop the RBM GR tablets by implementing the QbD concept. These results provide useful information for development of tablet formulations using the QbD.

DJ-1 regulates the expression of renal (pro)renin receptor via reactive oxygen species-mediated epigenetic modification.

BACKGROUND: DJ-1 protein plays multifunctional roles including transcriptional regulation and scavenging oxidative stress; thus, it may be associated with the development of renal disorders. We investigated whether DJ-1 protein regulates the expression of (pro)renin receptor (PRR), a newly identified member of renin-angiotensin system. METHODS: The levels of mRNA and protein were determined by real-time PCR and western blot, respectively. H2O2 production was tested by using fluorescence probe. Histone modification was determined by chromatin immunoprecipitation. RESULTS: The expression of PRR was significantly higher in the kidney from DJ-1 knockout mice (DJ-1-/-) compared with wild-type mice (DJ-1+/+). Histone deacetylase 1 recruitment at the PRR promoter was lower, and histone H3 acetylation and RNA polymerase II recruitment were higher in DJ-1-/- than in DJ-1+/+. Knockdown or inhibition of histone deacetylase 1 restored PRR expression in mesangial cells from DJ-1+/+. H2O2 production was greater in DJ-1-/- cells compared with DJ-1+/+ cells. These changes in PRR expression and epigenetic modification in DJ-1-/- cells were induced by H2O2 treatment and reversed completely by addition of an antioxidant reagent. Prorenin-stimulated ERK1/2 phosphorylation was greater in DJ-1-/- than in DJ-1+/+ cells and this was inhibited by a PRR-inhibitory peptide, and by AT1 and AT2 receptor inhibitors. The expression of renal fibrotic genes was higher in DJ-1-/- than in DJ-1+/+ cells and decreased in PRR-knockdown DJ-1-/- cells. CONCLUSIONS: We conclude that DJ-1 protein regulates the expression of renal PRR through H2O2-mediated epigenetic modification. GENERAL SIGNIFICANCE: We suggest that renal DJ-1 protein may be an important molecule in the acceleration of renal pathogenesis through PRR regulation.

Doxorubicin-Bound Albumin Nanoparticles Containing a TRAIL Protein for Targeted Treatment of Colon Cancer.

PURPOSE: We developed a new nanoparticle formulation comprised of human serum albumin (HSA) for co-delivery of doxorubicin (Dox) and tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) with the goal of apoptotic synergy in the treatment of colon cancer. METHODS: TRAIL (0.2, 0.4, 1.0%)- and Dox-loaded HSA nanoparticles (TRAIL/Dox HSA NPs) were prepared by using the nab(TM) technology. Morphological and physicochemical characterizations were investigated by dynamic light scattering and transmission electron microscopy. Synergistic cytotoxicity, apoptotic activity, and potential penetration into mass tumor were determined in HCT116 cell-based systems. Furthermore, antitumor efficacy and tumor targeting were also investigated. RESULTS: TRAIL/Dox HSA NPs were uniformly spherical with sizes of 60 ~ 120 nm. The encapsulation efficacy of Dox and TRAIL was 68.9-77.2% and 80.4-86.0%, respectively. TRAIL 1.0%/Dox HSA NPs displayed the best inhibition of HCT116 colon cancer cells; inhibition was 6 times higher than achieved with Dox HSA NPs. The TRAIL 1.0%/Dox HSA NPs formulation was studied further. Flow cytometry analysis and TUNEL assay revealed that TRAIL 1.0%/Dox HSA NPs had markedly greater apoptotic activity than Dox HSA NPs. In HCT116 tumor-bearing BALB/c nu/nu mice, TRAIL 1.0%/Dox HSA NPs had significantly higher antitumor efficacy than Dox HSA NPs (tumor volume; 933.4 mm(3) vs. 3183.7 mm(3), respectively). TRAIL 1.0%/Dox HSA NPs penetrated deeply into tumor masses in a HCT116 spheroid model and localized in tumor sites after tail vein injection. CONCLUSIONS: Data indicate that TRAIL 1.0%/Dox HSA NPs offer advantages of co-delivery of Dox and TRAIL in tumors, with potential synergistic apoptosis-based anticancer therapy.

Formulation of Nanoparticle Containing Everolimus Using Microfluidization and Freeze-Drying.

The aims of this study were to improve in vitro dissolution property of poorly water-soluble everolimus (EVR) for enhanced bioavailability without using organic solvents and characterize the effects of microfluidization and freeze-drying on physicochemical properties of EVR nanosuspension and nanoparticle, respectively. EVR nanosuspension was prepared using microfluidization with various types and concentrations of stabilizers. After that, it was solidified into nanoparticle using freeze-drying with various concentrations of xylitol, a cryoprotectant. The particle size, zeta potential, physical stability, and chemical stability of EVR nanosuspension and nanoparticle were measured. In vitro release of EVR nanoparticle was also measured and compared with that of physical mixture. Zero point five percent (w/w) poloxamer 407 (P407) was chosen as the stabilizer considering particle size, zeta potential, and yield of EVR nanosuspension. Freeze-drying with 1% (w/w) xylitol improved both physical and chemical stability of EVR nanoparticle. In vitro release test showed improved dissolution property compared to that of physical mixture, implying enhanced bioavailability.

Formulation and Evaluation of a Self-microemulsifying Drug Delivery System Containing Bortezomib.

The purposes of the present study were to develop a self-microemulsifying drug delivery system (SMEDDS) containing bortezomib, a proteasome inhibitor. The solubility of the drug was evaluated in 15 pharmaceutical excipients. Combinations of oils, surfactants and cosurfactants were screened by drawing pseudo-ternary phase diagrams. The system exhibiting the largest region of microemulsion was considered optimal. Bortezomib SMEDDS spontaneously formed a microemulsion when diluted with an aqueous medium with a median droplet size of approximately 20-30 nm. In vitro release studies showed that the SMEDDS had higher initial release rates for the drug when compared with the raw drug material alone. Measurement of the viscosity, size, and ion conductivity indicated that a phase inversion from water in an oil system to oil in a water system occurred when the weight ratio of the water exceeded 30% of the entire microemulsion system. In a pharmacokinetics study using rats, the bortezomib microemulsion failed to improve the bioavailability of the drug. The reason was assumed to be degradation of the drug in the microemulsion in the gastrointestinal tract. However, bortezomib in Labrasol(®) solution (an aqueous solution containing 0.025% Labrasol(®)) showed significantly increased area under the curve from 0-24 h (AUC0-24 h) and maximum plasma concentration (Cmax) values compared to the drug suspension. The findings of this study imply that oral delivery of a bortezomib and colloidal system containing Labrasol(®) could be an effective strategy for the delivery of bortezomib.

The serum protein fetuin-B is involved in the development of acute myocardial infarction.

The rupture of an atherosclerotic plaque is one of the main causes of coronary artery thrombotic occlusion, leading to myocardial infarction. However, the exact mechanism and causal risk factors for plaque rupture remain unclear. To identify a potential molecule that can influence atherosclerotic plaque rupture, we investigated protein expression in serum from patients with acute myocardial infarction (AMI) and stable angina (SA), using proteomic analysis. The expression of six proteins, including fibrinogen, fetuin-B, keratin 9, proapolipoprotein and fibrinogen, were altered in serum from patients with AMI compared with serum from those with SA. Of these, fetuin-B, proapolipoprotein, fibrinogen γ-B-chain precursors and fibrinogen expression were greater in serum from patients with AMI than from patients with SA. Increased fetuin-B expression in serum from AMI patients was also confirmed by Western blot analysis. Treatment with recombinant human fetuin-B increased the migration in monocytes and macrophages in a concentration-dependent manner. Fetuin-B also affected vascular plaque-stabilizing factors, including lipid deposition and cytokine production in macrophages, the activation of matrix metalloproteinase (MMP)-2 in monocytes, and the activation of apoptosis and MMP-2 in vascular smooth muscle cells. Moreover, in vivo administration of fetuin-B decreased the collagen accumulation and smooth muscle cell content and showed an increased number of macrophages in the vascular plaque. From these results, we suggest that fetuin-B may act as a modulator in the development of AMI. This study may provide a therapeutic advantage for patients at high risk of AMI.

The protective effect of hispidin against hydrogen peroxide-induced apoptosis in H9c2 cardiomyoblast cells through Akt/GSK-3ß and ERK1/2 signaling pathway.

Hispidin, a phenolic compound from Phellinus linteus (a medicinal mushroom), has been shown to possess strong anti-oxidant, anti-cancer, anti-diabetic, and anti-dementia properties. However, the cardioprotective efficacy of hispidin has not yet been investigated. In the present study, we investigated the protective effect of hispidin against oxidative stress-induced apoptosis in H9c2 cardiomyoblast cells and neonatal rat ventricular myocytes. While the treatment of H9c2 cardiomyoblast cells with hydrogen peroxide caused a loss of cell viability and an increase in the number of apoptotic cells, hispidin significantly protected the cells against hydrogen peroxide-induced cell death without any cytotoxicity as determined by XTT assay, LDH release assay, Hoechst 33342 assay, and Western blotting of apoptosis proteins such as caspase-3, Bax, and Bcl-2. Our data also shows that hispidin significantly scavenged intracellular ROS, and markedly enhanced the expression of antioxidant enzymes such as heme oxygenase-1 and catalase, which was accompanied by the concomitant activation of Akt/GSK-3ß and ERK1/2 phosphorylation in H9c2 cardiomyoblast cells. The effects of hispidin on Akt and ERK phosphorylation were abrogated by LY294002 (a PI3K/Akt inhibitor) and U0126 (an ERK1/2 inhibitor). The effect of hispidin on GSK-3b activities was also blocked by LY294002. Furthermore, inhibiting the Akt/GSK-3ß and ERK1/2 pathway by these inhibitors significantly reversed the hispidin-induced Bax and Bcl-2 expression, apoptosis induction, and ROS production. These findings indicate that hispidin protects against apoptosis in H9c2 cardiomyoblast cells exposed to hydrogen peroxide through reducing intracellular ROS production, regulating apoptosis-related proteins, and the activation of the Akt/GSK-3ß and ERK1/2 signaling pathways.

The Protective Effect of INH2BP, a Novel PARP Inhibitor 5-Iodo-6-Amino-1,2-Benzopyrone, Against Hydrogen Peroxide-Induced Apoptosis Through ERK and p38 MAPK in H9c2 Cells.

INH2BP (5-iodo-6-amino-1,2-benzopyrone), a poly-ADP ribose polymerase inhibitor, has been shown to possess anti-cancer, anti-viral, and anti-inflammation properties. The aim of this study was to investigate the protective effect of INH2BP against oxidative stress-induced apoptosis in H9c2 cardiomyoblast cells. While the treatment of H9c2 cardiomyoblasts cells with hydrogen peroxide (H2O2) caused a loss of cell viability and an increase in the number of apoptotic cells, INH2BP significantly protected the cells against H2O2-induced cell death without any cytotoxicity. Our data also shows that INH2BP significantly scavenged intracellular reactive oxygen species (ROS), and markedly enhanced the expression of antioxidant enzymes such as Mn-SOD (superoxide) and Cu/Zn-SOD, and heme oxygenase-1, which was accompanied by the concomitant activation of extracellular regulated kinase 1/2 (ERK1/2) and p38 mitogen-activated protein kinase (MAPK) phosphorylation in H9c2 cells. The effects of INH2BP on ERK1/2 and p38 MAPK phosphorylation were abrogated by PD98059, an ERK1/2 inhibitor, and SB203580, a p38 inhibitor. In addition, inhibition of ERK1/2 and p38 MAPK by these inhibitors significantly attenuated INH2BP-mediated H9c2 viability as well as cleaved caspases-3, Bax, and Bcl-2 activation. Taken together, these results demonstrate that INH2BP prevents H2O2-induced apoptosis in H9c2 cells by reducing the production of intracellular ROS, regulating apoptotic-related proteins, and the activation of the ERK1/2 and p38 MAPK.

Effect of Process Parameters on Formation and Aggregation of Nanoparticles Prepared with a Shirasu Porous Glass Membrane.

The objectives of this study were to prepare itraconazole (ITZ) nanoparticles using a Shirasu porous glass (SPG) membrane and to characterize the effects of diverse preparation parameters on the physical stability of nanoparticles. SPG membrane technology was used for the antisolvent precipitation method. The preparation of nanoparticles was carried out over a wide range of continuous-phase factors (type of surfactant, surfactant concentration), dispersed-phase factors (solvent type, solvent volume used to dissolve ITZ), and technical factors (pressure, membrane pore size, stirring speed in the continuous phase, temperature). Improved physical stability of nanoparticles was observed when surfactant with a lower molecular weight and higher hydrophilic segment ratio was used. The water miscibility of the solvent also had an effect on the physical stability. N,N-Dimethylacetamide contributed to creating a well-rounded shape and narrow size distribution due to high miscibility. Concentration of the surfactant and solvent volume used for dissolving ITZ were related to instability of nanoparticles, resulting from depletion attraction and Ostwald ripening. In addition to these factors, technical factors changed the environment surrounding ITZ nanoparticles, such as the physicochemical equilibrium between surfactant and ITZ nanoparticles. Therefore, the appropriate continuous-phase factors, dispersed-phase factors, and technical factors should be maintained for stabilizing ITZ nanoparticles.

Formulation and in Vitro Evaluation of Self-microemulsifying Drug Delivery System Containing Fixed-Dose Combination of Atorvastatin and Ezetimibe.

This paper focuses on the development and physicochemical characterization of a self-microemulsifying drug delivery system (SMEDDS) containing a fixed-dose combination of atorvastatin (ATR) and ezetimibe (EZT). The solubility of both drugs was determined in excipient screening studies. Ternary-phase diagrams were drawn for 27 systems composed of different surfactants, cosurfactants, and oils at different surfactant-to-cosurfactant (S/CoS) ratios, and the system exhibiting the largest percentage area of the self-microemulsifying region was selected. The optimum oil ratio in the SMEDDS was selected by evaluating the mean droplet size of the resultant microemulsions. The underlying mechanism of the lower ATR loading capacity compared with EZT was elucidated by measurement of the zeta potential and UV absorption analysis. The results implied that ATR was located exclusively in the surfactant-cosurfactant layer, whereas EZT was located both in the microemulsion core and the surfactant-cosurfactant layer. In vitro dissolution studies showed that the SMEDDS had higher initial dissolution rates for both drugs when compared with marketed products. More importantly, EZT had a significantly increased dissolution profile in distilled water and pH 4.0 acetate buffer, implying enhanced bioavailability.

Organic-aqueous crossover coating process for the desmopressin orally disintegrating microparticles.

The purpose of the present study was to prepare desmopressin orally disintegrating microparticles (ODMs) using organic-aqueous crossover coating process which featured an organic sub-coating followed by an aqueous active coating. Sucrose beads and hydroxypropyl cellulose (HPC) were used as inert cores and a coating material, respectively. Characterizations including size distribution analysis, in-vitro release studies and in-vitro disintegration studies were performed. A pharmacokinetic study of the ODMs was also conducted in eight beagle dogs. It was found that sucrose beads should be coated using organic solvents to preserve their original morphology. For the active coating, the aqueous coating solution should be used for drug stability. When sucrose beads were coated using organic-aqueous crossover coating process, double-layer ODMs with round shapes were produced with detectable impurities below limit of US Pharmacopeia. The median size of ODMs was 195.6 µm, which was considered small enough for a good mouthfeel. The ODMs dissolved in artificial saliva within 15 s because of hydrophilic materials including sucrose and HPC in the ODMs. Because of its fast-dissolving properties, 100% release of the drug was reached within 5 min. Pharmacokinetic parameters including Cmax and AUC24 indicated bioequivalence of the ODMs and the conventional immediate release tablets. Therefore, by using the organic-aqueous crossover coating process, double-layer ODMs were successively prepared with small size, round shapes and good drug stability.

Enhanced oral bioavailability of paclitaxel by solid dispersion granulation.

The main objective of this study was to develop novel orally administrable tablets containing solid dispersion granules (SDG) of amorphous paclitaxel (PTX) prepared by fluid bed technology, and to evaluate its in vitro dissolution and in vivo pharmacokinetics (PK) in beagle dogs. The SDG were prepared using optimized composition by fluid bed technology, and characterized for solid-state properties. The release study of SDG tablet (SDG-T) in simulated gastric fluid showed a rapid release of PTX, reaching maximum dissolution within 20 min. Finally, the PK profile of SDG-T and a reference formulation Oraxol™ (oral solution formulation used in Phase I clinical study) at a dose of 60 mg orally with co-administration of P-gp inhibitor HM38101, and Taxol® at a dose of 10 mg intravenously (i.v.) was investigated in beagle dogs. The mean absolute BA% of PTX following SDG-T and Oraxol™ solution was 8.23 and 6.22% in comparison to i.v. administration of Taxol®. The relative BA% of PTX from SDG-T in comparison to Oraxol™ solution was 132.25% at a dose of 60 mg following oral administration. In conclusion, we have successfully prepared PTX tablets with solid dispersion granules (SDG) of amorphous PTX using fluid bed technology that could provide plasma PTX concentration in the range of 10-150 ng/mL for a period of 24 h following oral administration in dogs with a P-gp inhibitor. Hence, this could be a promising formulation for PTX oral delivery and could be used in our intended clinical studies following pre-clinical efficacy studies.

IL-32γ enhances TNF-α-induced cell death in colon cancer.

Interleukin (IL)-32 is a recently discovered cytokine that appears to play an important role in human colon cancer growth. We investigated that IL-32γ in combination with TNF-α remarkably inhibited cell growth of human colon cancer cells (HCT116 and SW620) and tumor growth in xenograft-bearing nude mice. The transient enforced overexpression of IL-32γ potentiated the inhibitory effect of TNF-α on DNA synthesis, cell number and protein content, and enhanced apoptosis in colon cancer cells. We also found that knockdown of IL-32γ by siRNA showed the abolishment of cell growth inhibitory effect of TNF-α. The IL-32γ-overexpressing colon cancer cells further increased TNF-α-mediated expression of p38 MAPK as well as that of Bax, cleaved caspase-3 and -9, but decreased that of antiapoptotic proteins such as Bcl-2, cellular inhibitor of apoptosis protein (IAP) and X chromosome IAP. In xenograft model, the lipopolysaccharide (LPS)-injected (1.25 mg/kg) mice inoculated with IL-32γ-transfected HCT116 colon cancer cells were more decrease tumor volume and weight than inoculated with vector. Tumor tissues isolated from LPS-injected mice inoculated with IL-32γ-overexpressing colon cancer cells potentiated the expression levels of pro-apoptotic proteins such as cleaved caspase-3, 9 and Bax, but decreased that of Bcl-2. Furthermore, the mice increased IL-10 production, but decreased IL-6 levels in serum. In conclusion, our results suggest that IL-32γ may potentiate TNF-α-induced cell growth inhibition through activation of p38 MAPK pathways.