Fourier ptychographic topography.

Topography measurement is essential for surface characterization, semiconductor metrology, and inspection applications. To date, performing high-throughput and accurate topography remains challenging due to the trade-off between field-of-view (FOV) and spatial resolution. Here we demonstrate a novel topography technique based on the reflection-mode Fourier ptychographic microscopy, termed Fourier ptychograhpic topography (FPT). We show that FPT provides both a wide FOV and high resolution, and achieves nanoscale height reconstruction accuracy. Our FPT prototype is based on a custom-built computational microscope consisting of programmable brightfield and darkfield LED arrays. The topography reconstruction is performed by a sequential Gauss-Newton-based Fourier ptychographic phase retrieval algorithm augmented with total variation regularization. We achieve a synthetic numerical aperture (NA) of 0.84 and a diffraction-limited resolution of 750 nm, increasing the native objective NA (0.28) by 3×, across a 1.2 × 1.2 mm2 FOV. We experimentally demonstrate the FPT on a variety of reflective samples with different patterned structures. The reconstructed resolution is validated on both amplitude and phase resolution test features. The accuracy of the reconstructed surface profile is benchmarked against high-resolution optical profilometry measurements. In addition, we show that the FPT provides robust surface profile reconstructions even on complex patterns with fine features that cannot be reliably measured by the standard optical profilometer. The spatial and temporal noise of our FPT system is characterized to be 0.529 nm and 0.027 nm, respectively.

Lens-free reflective topography for high-resolution wafer inspection.

The demand for high-resolution and large-area imaging systems for non-destructive wafer inspection has grown owing to the increasing complexity and extremely fine nature of semiconductor processes. Several studies have focused on developing high-resolution imaging systems; however, they were limited by the tradeoff between image resolution and field of view. Hence, computational imaging has arisen as an alternative method to conventional optical imaging, aimed at enhancing the aforementioned parameters. This study proposes a method for improving the resolution and field of view of an image in a lens-less reflection-type system. Our method was verified by computationally restoring the final image from diffraction images measured at various illumination positions using a visible light source. We introduced speckle illumination to expand the numerical aperture of the entire system, simultaneously improving image resolution and field of view. The image reconstruction process was accelerated by employing a convolutional neural network. Using the reconstructed phase images, we implemented high-resolution topography and demonstrated its applicability in wafer surface inspection. Furthermore, we demonstrated an ideal diffraction-limited spatial resolution of 1.7 µm over a field of view of 1.8 × 1.8 mm2 for the topographic imaging of targets with various surface roughness. The proposed approach is suitable for applications that simultaneously require high throughput and resolution, such as wafer-wide integrated metrology, owing to its compact design, cost-effectiveness, and mechanical robustness.

Stretchable and Skin-Conformal Thermoelectric Generator with Highly Flexible and Plastically Bendable Silver Selenide Films.

Among inorganic thermoelectric materials, flexible thermoelectric materials have attracted considerable attention. In this study, highly flexible and plastically bendable silver selenide films with excellent thermoelectric performance at room temperature are presented. The flexibility of the freestanding silver selenide films was significantly improved through a simple annealing treatment. The highly flexible silver selenide films with a thickness of 26.0 µm displayed outstanding n-type thermoelectric performance, achieving an in-plane zT value of 0.38 at room temperature. Because silver selenide films are plastically bendable with a bending radius of less than 1 mm, they can be shaped into various forms. To achieve stretchability and skin-conformality in the thermoelectric generator, S-shaped silver selenide strips were used as an n-type thermoelectric element. Effective harvesting of electricity from heat of the human body was successfully demonstrated.

Substrate-Free Thermoelectric 25 µm-Thick Ag2Se Films with High Flexibility and In-Plane zT of 0.5 at Room Temperature.

Thermoelectric inorganic films are flexible when sufficiently thin. By removing the substrate, that is, making them free-standing, the flexibility of thermoelectric films can be enhanced to the utmost extent. However, studies on the flexibility of free-standing thermoelectric inorganic films have not yet been reported. Herein, the high thermoelectric performance and flexibility of free-standing thermoelectric Ag2Se films are reported. Free-standing Ag2Se films with a thickness of 25.0 ± 3.9 µm exhibited an in-plane zT of 0.514 ± 0.060 at room temperature. These films exhibited superior flexibility compared to Ag2Se films constrained on a substrate. The flexibility of the Ag2Se films was systematically investigated in terms of bending strain, bending radius, thickness, and elastic modulus. Using free-standing Ag2Se films, a substrate-free, flexible thermoelectric generator was fabricated. The energy-harvesting capacity of the thermoelectric generator was also demonstrated.

Tabletop extreme ultraviolet reflectometer for quantitative nanoscale reflectometry, scatterometry, and imaging.

Imaging using coherent extreme-ultraviolet (EUV) light provides exceptional capabilities for the characterization of the composition and geometry of nanostructures by probing with high spatial resolution and elemental specificity. We present a multi-modal tabletop EUV imaging reflectometer for high-fidelity metrology of nanostructures. The reflectometer is capable of measurements in three distinct modes: intensity reflectometry, scatterometry, and imaging reflectometry, where each mode addresses different nanostructure characterization challenges. We demonstrate the system's unique ability to quantitatively and non-destructively measure the geometry and composition of nanostructures with tens of square microns field of view and sub-nanometer precision. Parameters such as surface and line edge roughness, density, nanostructure linewidth, and profile, as well as depth-resolved composition, can be quantitatively determined. The results highlight the applicability of EUV metrology to address a wide range of semiconductor and materials science challenges.

Zero Energy Heating of Solvent with Network-Structured Solar-Thermal Material: Eco-Friendly Palladium Catalysis of the Suzuki Reaction.

Solar-thermal materials absorb sunlight and convert it into heat, which is released into the surrounding medium. Utilization of solar energy for solvent heating can be a potential method of eco-friendly organic reactions. However, to date, significant heating of the entire volume of a solvent by 1 sun illumination has not been reported. In the present work, a network structure of solar-thermal materials has been proposed for zero energy heating of a solvent under 1 sun illumination. A network-structured solar-thermal material with an additional catalytic function was fabricated by sputtering palladium into a melamine sponge. The nanocrystalline palladium-decorated melamine sponge (Pd-sponge) has excellent sunlight absorption properties in the entire wavelength range that enable efficient solar-thermal conversion. The Pd-sponge can reduce heat loss to the surroundings by effectively blocking thermal radiation from the heated solvent. The temperature of the reaction solution with the ethanol-water mixture filled in the Pd-sponge increased from 23 to 59 °C under 1 sun illumination. The elevated temperature of the reaction solutions by solar-thermal conversion successfully accelerated the heterogeneous Pd-catalyzed Suzuki coupling reactions with high conversions. Easy and low-energy-consuming multicycle use of the solar-thermal and catalytic properties of the Pd-sponge has also been demonstrated.

Reverse signaling through BAFF differentially regulates the expression of inflammatory mediators and cytoskeletal movements in THP-1 cells.

Most members of the tumor-necrosis factor superfamily have been reported to mediate reverse signaling in T cells, macrophages, and/or dendritic cells. BAFF has been reported to have important functions in B-cell survival through forward signaling, but the presence of reverse signaling has not been explored. To investigate the possibility of BAFF-mediated reverse signaling, the expression patterns and functions of BAFF were analyzed in monocytic cell lines including the human macrophage-like cell line, THP-1. The expression of BAFF and its receptors was detected in monocytic cell lines, either before or after activation. The stimulation of BAFF induced the expression of matrix metalloproteinase (MMP)-9, interleukin -8, and transforming growth factor-beta-induced gene product (beta ig-h3) and the upregulation of intercellular adhesion molecule-1 in THP-1 cells. The activation of mitogen-activated protein kinase extracellular signal-regulated kinase1/2 and nuclear factor-kappaB was required for these responses. In addition to these stimulatory effects, BAFF-mediated signaling inhibited processes involving cytoskeletal movement such as phagocytosis and transmigration through blocking the activation of phosphatidylinositol 3-kinase/AKT and Rac-1. Furthermore, murine primary macrophage culture such as peritoneal macrophages expressed BAFF and stimulation of it induced the expression of MMP-9. These observations show that the reverse signaling initiated from BAFF induces the expression of inflammatory mediators while suppressing the cytoskeletal movements associated with phagocytosis and transmigration.

The differential effect of high and low molecular weight fucoidans on the severity of collagen-induced arthritis in mice.

Fucoidans have been extensively studied for their various biological activities but the exact role of fucoidans on the inflammatory processes associated with arthritic disease has not been studied. The effect of the treatment of high, medium and low molecular weight fucoidans (HMWF, MMWF and LMWF, respectively) on the progression of collagen-induced arthritis (CIA) was tested. A daily oral administration of HMWF enhanced the severity of arthritis, inflammatory responses in the joint cartilage and the levels of collagen-specific antibodies, while LMWF reduced the severity of arthritis and the levels of Th1-dependent collagen-specific IgG(2a). Further in vitro analyses, using macrophage cell lines, revealed that the HMWF induced the expression of various inflammatory mediators, and enhanced the cellular migration of macrophages. These stimulatory effects of fucoidan decreased in fucoidans with lower molecular weights and LMWF did not exhibit any pro-inflammatory effects. Interestingly, the oral administration of HMWF enhanced the production of IFN-gamma, one of the Th1 cytokines, in collagen-stimulated spleen cells that had been isolated from CIA mice, while LMWF had the opposite effect. These results indicate that HMWF enhances arthritis through enhancing the inflammatory activation of macrophages while LMWF reduces arthritis through the suppression of Th1-mediated Immune reactions.

T Cell Stimulatory Effects of Korean Red Ginseng through Modulation of Myeloid-Derived Suppressor Cells.

Myeloid-derived suppressor cells (MDSCs) actively suppress immune cells and have been considered as an impediment to successful cancer immunotherapy. Many approaches have been made to overcome such immunosuppressive factors and to exert effective anti-tumor effects, but the possibility of using medicinal plants for this purpose has been overlooked. Korean red ginseng (KRG) is widely known to possess a variety of pharmacological properties, including immunoboosting and anti-tumor activities. However, little has been done to assess the anti-tumor activity of KRG on MDSCs. Therefore, we examined the effects of KRG on MDSCs in tumor-bearing mice and evaluated immunostimulatory and anti-tumor activities of KRG through MDSC modulation. The data show that intraperitoneal administration of KRG compromises MDSC function and induces T cell proliferation and the secretion of IL-2 and IFN-γ, while it does not exhibit direct cytotoxicity on tumor cells and reduced MDSC accumulation. MDSCs isolated from KRG-treated mice also express significantly lower levels of inducible nitric oxide synthase and IL-10 accompanied by a decrease in nitric oxide production compared with control. Taken together, the present study demonstrates that KRG enhances T cell function by inhibiting the immunosuppressive activity of MDSCs and suggests that although KRG alone does not exhibit direct anti-tumor effects, the use of KRG together with conventional chemo- or immunotherapy may provide better outcomes to cancer patients through MDSC modulation.