RESUMO
This study introduces an approach to overcome the limitations of conventional pressure sensors by developing a thin and lightweight composite film specifically tailored for flexible capacitive pressure sensors, with a particular emphasis on the medium and high pressure range. To accomplish this, we have engineered a composite film by combining polyvinylidene fluoride (PVDF) and graphite nanoplatelets (GNP) derived from expanded graphite (Ex-G). A uniform sized GNPs with an average lateral size of 2.55av and an average thickness of 33.74 av with narrow size distribution was obtained with a gas-induced expansion of expandable graphite (EXP-G) combined with tip sonication in solvent. By this precisely controlled GNP within the composite film, a remarkable improvement in sensor sensitivity has been achieved, surpassing 4.18 MPa-1 within the pressure range of 0.1 to 1.6 MPa. This enhancement can be attributed to the generation of electric charge from the movement of GNP in the polymer matrix. Additionally, stability testing has demonstrated the reliable operation of the composite film over 1000 cycles. Notably, the composite film exhibits exceptional continuous pressure sensing capabilities with a rapid response time of approximately 100 milliseconds. Experimental validation using a 3 × 3 sensor array has confirmed the accurate detection of specific contact points, thus highlighting the potential of the composite film in selective pressure sensing. These findings signify an advancement in the field of flexible capacitive pressure sensors that offer enhanced sensitivity, consistent operation, rapid response time, and the unique ability to selectively sense pressure.
RESUMO
A suitable and non-invasive methanol sensor workable in ambient temperature conditions with a high response has gained wide interest to prevent detrimental consequences for industrial workers from its low-level intoxication. In this work, we present a tunable and highly responsive ppb-level methanol gas sensor device working at room temperature via a bottom-up synthetic approach using exfoliated graphene sheet (EGs) and ZnO quantum dots (QDs) on an aluminum anodic oxide (AAO) template. It is verified that EGs-supported AAO with a vertical electrode configuration enabled high and fast-responsive methanol sensing. Moreover, the hydroxyl and carboxyl groups of the high surface area EGs and ZnO QDs with a 3.37 eV bandgap efficiently absorbing UV light led to 56 times high response due to the enhanced polarization on the sensor surface compared to non-UV-radiated EGs/AAO at 800 ppb of methanol. The optimal resonance frequency of methanol is determined to be 100 kHz, which could detect methanol with high response of 2.65% at 100 ppm. The limit of detection (LOD) concentration is obtained at 2 ppb level. This study demonstrates the potential of UV-assisted ZnO, EGs, and AAO-based capacitance sensor material for rapidly detecting hazardous gaseous light organic molecules at ambient conditions, and the overall approach can be easily expanded to a novel non-invasive monitoring strategy for light and hazardous volatile organic exposures.
Assuntos
Grafite , Nanoestruturas , Óxido de Zinco , Óxido de Alumínio/química , Gases , Grafite/química , Humanos , Metanol , Nanoestruturas/química , Temperatura , Óxido de Zinco/químicaRESUMO
Graphite foils (GFs) are emerging as a new class of electrodes in supercapacitors (SCs) based on their light weight, and high electrical conductivity, although the surface area remains low. A novel method of, in situ electrochemical exfoliation and modification of GF in the assembled SCs, showed high energy density and power density of the SC devices.
RESUMO
The electrochemical exfoliation of graphite has been considered to be an effective approach for the mass production of high-quality graphene due to its easy, simple, and eco-friendly synthetic features. However, water dispersion of graphene produced in the electrochemical exfoliation method has also been a challenging issue because of the hydrophobic properties of the resulting graphene. In this study, we report the electrochemical exfoliation method of producing water-dispersible graphene that importantly contains the relatively low oxygen content of <10% without any assistant dispersing agents. Through the mild in situ sulfate functionalization of graphite under alkaline electrochemical conditions using a pH buffer, the highly water-dispersible graphene could be produced without any additional separation processes of sedimentation and/or centrifugation. We found the resulting graphene sheets to have high crystalline basal planes, lateral sizes of several µm, and a thickness of <5 nm. Furthermore, the high aqueous dispersion stability of as-prepared graphene could be demonstrated using a multi-light scattering technique, showing very little change in the optical transmittance and the terbiscan stability index over time.
RESUMO
Recent advances in nanomaterials and nano-microfabrication have enabled the development of flexible wearable electronics. However, existing manufacturing methods still rely on a multi-step, error-prone complex process that requires a costly cleanroom facility. Here, we report a new class of additive nanomanufacturing of functional materials that enables a wireless, multilayered, seamlessly interconnected, and flexible hybrid electronic system. All-printed electronics, incorporating machine learning, offers multi-class and versatile human-machine interfaces. One of the key technological advancements is the use of a functionalized conductive graphene with enhanced biocompatibility, anti-oxidation, and solderability, which allows a wireless flexible circuit. The high-aspect ratio graphene offers gel-free, high-fidelity recording of muscle activities. The performance of the printed electronics is demonstrated by using real-time control of external systems via electromyograms. Anatomical study with deep learning-embedded electrophysiology mapping allows for an optimal selection of three channels to capture all finger motions with an accuracy of about 99% for seven classes.
Assuntos
Técnicas Biossensoriais/métodos , Eletrônica/métodos , Grafite/química , Condutividade Elétrica , Humanos , Nanoestruturas/química , Dispositivos Eletrônicos Vestíveis , Tecnologia sem FioRESUMO
We present a thermochemical hydrogen (TCH) gas sensor fabricated with Pt-decorated exfoliated graphene sheets and a tellurium nanowire-based thermoelectric (TNTE) layer operating at room temperature in wet air. The sensor device was able to detect 50 ppm to 3% of hydrogen gas within several seconds (response/recovery times of 6/5.1 s at 4000 ppm of hydrogen gas) at room temperature due to the relatively high surface area of homogeneously dispersed Pt nanocrystals (â¼8 nm) decorated on graphene sheets and the excellent Seebeck coefficient (428 µV/K) of the TNTE layer. Furthermore, it was observed that the effect of the relative humidity on sensing properties was greatly minimized by incorporating Pt-decorated graphene sheets. These results indicate that our device has great potential as a low power consumption gas sensor for IoTs.
RESUMO
OBJECTIVE: The present study analyzed relationship of workplace violence and perpetrators of violence on sleep disturbance among wage workers in Korea. METHODS: The present study used data from the 4th Korean Working Conditions Survey (KWCS) of 2014 in selecting a total of 25,138wage workers as the study population, which excluded those who failed or refused to respond to questions required for the present study. The workplace violence experience group included people who satisfied at least one of six relevant criteria (verbal abuse, unwanted sexual attention, threatening or humiliating behavior, physical violence, bullying/harassment, and sexual harassment) and the group was divided according to whether the perpetrator of violence was a client or colleague. Presence of sleep disturbance was determined based on subjective symptoms felt within the past 12 months by each individual. A multiple logistic regression analysis was performed to identify the effects on sleep distance according to general, occupational, and psychosocial characteristics, as well as the types of workplace violence and perpetrators of violence. RESULTS: Workplace violence was found as a factor affecting sleep disturbance (OR = 3.773, 95 % CI = 3.058-4.655), and with respect to perpetrators of violence, complaint of sleep disturbance symptoms was higher when the perpetrator was a colleague or boss (OR = 5.688, 95 % CI 4.189-7.723) than a client (OR = 2.992, 95 % CI 2.301-3.890). CONCLUSION: Workplace violence had an effect on occurrence of sleep disturbance and when the perpetrators of violence was a boss or colleague at work, the risk for symptoms such as sleep disturbance increased, which indicated the need for appropriate intervention from a workplace healthcare perspective, including preventive education of workplace violence among employees.