Placing CF2 in the Center: Major Physicochemical Changes Upon a Minor Structural Alteration in Gem-Difunctional Compounds.

Fluorine atoms play an important role in all branches of chemistry and accordingly, it is very important to study their unique and varied effects systematically, in particular, the structure-physicochemical properties relationship. The present study describes exceptional physicochemical effects resulting from a H/F exchange at the methylene bridge of gem-difunctional compounds. The Δlog P(CF2-CH2) values, that is, the change in lipophilicity, observed for the CH2 /CF2 replacement in various α,α-phenoxy- and thiophenoxy-esters/amides, diketones, benzodioxoles and more, fall in the range of 0.6-1.4 units, which for most cases, is far above the values expected for such a replacement. Moreover, for compounds holding more than one such gem-difunctional moiety, the effect is nearly additive, so one can switch from a hydrophilic compound to a lipophilic one in a limited number of H/F exchanges. DFT studies of some of these systems revealed that polarity, conformational preference as well as charge distributions are strongly affected by such hydrogen to fluorine atom substitution. The pronounced effects described, are a result of the interplay between changes in polarity, H-bond basicity and molecular volume, which were obtained with a very low 'cost' in terms of molecular weight or steric effects and may have a great potential for implementation in various fields of chemical sciences.

Solar and Visible Light Assisted Peptide Coupling.

Amino acid and peptide couplings are widely used in fields related to pharma and materials. Still, current peptide synthesis continues to rely on the use of expensive, water sensitive, and waste-generating coupling reagents, which are often prepared in multi-step sequences and used in excess. Herein is described a peptide coupling reaction design that relies mechanistically on sun-light activation of a 4-dimethylamino-pyridine-alkyl halide charge-transfer complex to generate a novel coupling reagent in situ. The resulting coupling method is rapid, does not require dry solvents or inert atmosphere, and is compatible with all the most common amino acids and protecting groups. Peptide couplings can be run on gram-scale, without the use of special equipment. This method has a significantly reduced environmental and financial footprint compared to standard peptide coupling reactions. Experimental and computational studies support the proposed mechanism.

Proposed Proton-Transfer Mechanism for the Initial Decomposition Steps of BTATz.

The first steps in the gas-phase decomposition mechanism of N3,N6-bis (1 H-tetrazol-5-yl)-1,2,4,5-tetrazine-3,6-diamine, BTATz, anions and the kinetic isotope effects in these processes were studied using combined multistage mass spectrometry (MS/MS) and computational techniques. Two major fragmentation processes, the exergonic loss of nitrogen molecules and the endergonic loss of hydrazoic acid, were identified. The observation of a primary isotope effect supported by calculations suggests that the loss of a nitrogen molecule from the tetrazole ring involves proton migration, either to or within the terazole ring, as a rate-determining step. The fragmentation of a hydrazoic acid occurs through an asymmetrical retro-pericyclic reaction. Calculations show the relevance of these mechanisms to neutral BTATz. Our findings may contribute to the understanding of decomposition routes in these nitrogen-rich energetic materials and allow tailoring their reactivity and decomposition pathways for better control of performance.

Addressing the Opioids Lipophilicity Challenge via a Straightforward and Simultaneous 1H NMR-Based logP/D Determination, Both Separately and in Mixtures.

A systematic study of trends in the lipophilicity of prominent representatives of the opioid family, including natural, semisynthetic, synthetic, and endogenous neuropeptide opioids, is described. This was enabled by a straightforward 1H NMR-based logP/D determination method developed for compounds holding at least one aromatic hydrogen atom. Moreover, the new method enables a direct simultaneous logD determination of opioid mixtures, overcoming the high sensitivity of this family to the measurement conditions, which is critical when a determination of the exact ΔlogD values of matched pairs is required. Interpretation of the experimental ΔlogD7.4 values of selected matched pairs, focusing inter alia on the 3-OMe and 14-OMe motifs in morphinan opioids, is suggested with the aid of DFT calculations and may be useful for the discovery of new opioid therapeutics.

Chemisorbed monolayers of corannulene penta-thioethers on gold.

Penta(tert-butylthio)corannulene and penta(4-dimethylaminophenylthio)corannulene form highly stable monolayers on gold surfaces, as indicated by X-ray photoelectron spectroscopy (XPS). Formation of these homogeneous monolayers involves multivalent coordination of the five sulfur atoms to gold with the peripheral alkyl or aryl substituents pointing away from the surface. No dissociation of C-S bonds upon binding could be observed at room temperature. Yet, the XPS experiments reveal strong chemical bonding between the thioether groups and gold. Temperature-dependent XPS study shows that the thermal stability of the monolayers is higher than the typical stability of self-assembled monolayers (SAMs) of thiolates on gold.

The Effect of Storage and Pasteurization (Thermal and High-Pressure) Conditions on the Stability of Phycocyanobilin and Phycobiliproteins.

The utilization of natural blue pigments in foods is difficult as they are usually unstable during processing and the commonly applied pH. The current study focuses on natural blue pigment, possessing antioxidant properties, found in Arthrospira platensis (spirulina), and phycobiliproteins (PBP). These pigments are a complex of conjugated protein and non-protein components, known as phycocyanobilin. PBP has low stability during pasteurization (high-pressure or heat treatments), resulting in protein denaturation and color deterioration that limits the application. The phycocyanobilin pigment might also be liable to oxidation during pasteurization and storage, resulting in color deterioration. Yet, the instability of the pigment phycocyanobilin during the pasteurization process and storage conditions was never studied before, limiting the comprehensive understanding of the reasons for PBP instability. In this study, the stability of phycocyanobilin under high-pressure and high-temperature conditions was compared to the stability of phycobiliproteins. We revealed that phycobiliproteins have a higher color deterioration rate at 70-80 °C than at high-pressure (300-600 MPa) whereas phycocyanobilin remained stable during high-pressure and heat processing. During storage at pH 7, phycocyanobilin was oxidized, and the oxidation rate increased with increasing pH, while at lower pH phycocyanobilin had low solubility and resulted in aggregation.

Species-specific lipophilicities of fluorinated diketones in complex equilibria systems and their potential as multifaceted reversible covalent warheads.

Combined molecular, physicochemical and chemical properties of electrophilic warheads can be applied to create covalent drugs with diverse facets. Here we study these properties in fluorinated diketones (FDKs) and their multicomponent equilibrium systems in the presence of protic nucleophiles, revealing the potential of the CF2(CO)2 group to act as a multifaceted warhead for reversible covalent drugs. The equilibria compositions of various FDKs in water/octanol contain up to nine species. A simultaneous direct species-specific 19F-NMR-based log P determination of these complex equilibria systems was achieved and revealed in some cases lipophilic to hydrophilic shifts, indicating possible adaptation to different environments. This was also demonstrated in 19F-MAS-NMR-based water-membrane partitioning measurements. An interpretation of the results is suggested by the aid of a DFT study and 19F-DOSY-NMR spectroscopy. In dilute solutions, a model FDK reacted with protected cysteine to form two hemi-thioketal regioisomers, indicating possible flexible regio-reactivity of CF2(CO)2 warheads toward cysteine residues.

Structure dependent stability and antioxidant capacity of strawberry polyphenols in the presence of canola protein.

Polyphenol stability in processed food affects sensorial and health-promoting properties. Thus, understanding the effects of various food components on polyphenols degradation, as a function of their chemical structure, can contribute to optimal product engineering. The current study focuses on the impact of polyphenol structure on polyphenol-protein interactions in correlation with their stability and total antioxidant capacity (TAC) during shelf-life. A strawberry polyphenol extract (SPE) and canola protein extract (CPE) were used as multicomponent polyphenol and plant-based protein models. A non-covalent interaction of SPE and CPE was observed at pH = 3. Among CPE proteins cruciferin was the most involved in interactions, and the polyphenols with the highest relative binding were flavonols (45 ± 3%-68 ± 2%), while anthocyanins presented lower values (0 ± 0.4%-27 ± 1%). The presence of the proteins enhanced mostly the anthocyanins' stability, yet the extent of the impact was not correlated with the relative binding. TAC was not better preserved by the presence of CPE.

Studying Lipophilicity Trends of Phosphorus Compounds by 31P-NMR Spectroscopy: A Powerful Tool for the Design of P-Containing Drugs.

Systematically studying the lipophilicity of phosphorus compounds is of great importance for many chemical and biological fields and particularly for medicinal chemistry. Here, we report on the study of trends in the lipophilicity of a wide set of phosphorus compounds relevant to drug design including phosphates, thiophosphates, phosphonates, thiophosphonates, bis-phosphonates, and phosphine chalcogenides. This was enabled by the development of a straightforward log P determination method for phosphorus compounds based on 31P-NMR spectroscopy. The log P values measured ranged between -3.2 and 3.6, and the trends observed were interpreted using a DFT study of the dipole moments and by H-bond basicity (pKHB) measurements of selected compounds. Clear signal separation in 31P-NMR spectroscopy grants the method high tolerability to impurities. Moreover, the wide range of chemical shifts for the phosphorus nucleus (250 to -250 ppm) enables a direct simultaneous log P determination of phosphorus compound mixtures in a single shake-flask experiment and 31P-NMR analysis.

Autosomal recessive hyponatremia due to isolated salt wasting in sweat associated with a mutation in the active site of Carbonic Anhydrase 12.

Genetic disorders of excessive salt loss from sweat glands have been observed in pseudohypoaldosteronism type I (PHA) and cystic fibrosis that result from mutations in genes encoding epithelial Na+ channel (ENaC) subunits and the transmembrane conductance regulator (CFTR), respectively. We identified a novel autosomal recessive form of isolated salt wasting in sweat, which leads to severe infantile hyponatremic dehydration. Three affected individuals from a small Bedouin clan presented with failure to thrive, hyponatremic dehydration and hyperkalemia with isolated sweat salt wasting. Using positional cloning, we identified the association of a Glu143Lys mutation in carbonic anhydrase 12 (CA12) with the disease. Carbonic anhydrase is a zinc metalloenzyme that catalyzes the reversible hydration of carbon dioxide to form a bicarbonate anion and a proton. Glu143 in CA12 is essential for zinc coordination in this metalloenzyme and lowering of the protein-metal affinity reduces its catalytic activity. This is the first presentation of an isolated loss of salt from sweat gland mimicking PHA, associated with a mutation in the CA12 gene not previously implicated in human disorders. Our data demonstrate the importance of bicarbonate anion and proton production on salt concentration in sweat and its significance for sodium homeostasis.

Modulation of the H-Bond Basicity of Functional Groups by α-Fluorine-Containing Functions and its Implications for Lipophilicity and Bioisosterism.

Modulation of the H-bond basicity (pKHB) of various functional groups (FGs) by attaching fluorine functions and its impact on lipophilicity and bioisosterism considerations are described. In general, H/F replacement at the α-position to H-bond acceptors leads to a decrease of the pKHB value, resulting, in many cases, in a dramatic increase in the compounds' lipophilicity (log Po/w). In the case of α-CF2H, we found that these properties may also be affected by intramolecular H-bonds between CF2H and the FG. A computational study of ketone and sulfone series revealed that α-fluorination can significantly affect overall polarity, charge distribution, and conformational preference. The unique case of α-di- and trifluoromethyl ketones, which exist in octanol/water phases as ketone, hemiketal, and gem-diol forms, in equilibrium, prevents direct log Po/w determination by conventional methods, and therefore, the specific log Po/w values of these species were determined directly, for the first time, using Linclau's 19F NMR-based method.

Switchable cucurbituril-bipyridine beacons.

4-Aminobipyridine derivatives form strong inclusion complexes with cucurbit[6]uril, exhibiting remarkably large enhancements in fluorescence intensity and quantum yields. The remarkable complexation-induced pK(a) shift (DeltapK(a)=3.3) highlights the strong charge-dipole interaction upon binding. The reversible binding phenomenon can be used for the design of switchable beacons that can be incorporated into cascades of binding networks. This concept is demonstrated herein by three different applications: 1) a switchable fluorescent beacon for chemical sensing of transition metals and other ligands; 2) direct measurement of binding constants between cucurbit[6]uril and various nonfluorescent guest molecules; and 3) quantitative monitoring of biocatalytic reactions and determination of their kinetic parameters. The latter application is illustrated by the hydrolysis of an amide catalyzed by penicillin G acylase and by the elimination reaction of a beta-cabamoyloxy ketone catalyzed by aldolase antibody 38C2.

Impact-induced gelation in aqueous methylcellulose solutions.

Aqueous methylcellulose is an "abnormal" inverse-freezing fluid, which gelates when heated. We ventured to stimulate this phase-transition by mechanical impact, whose resulting shockwaves and local heat could be uptaken by the endothermic gelation. High-speed photography was used to observe this transition in microsecond timescales. This phenomenon enables attenuation of shockwaves.

Sunlight assisted direct amide formation via a charge-transfer complex.

We report on the use of charge-transfer complexes between amines and carbon tetrachloride, as a novel way to activate the amine for photochemical reactions. This principle is demonstrated in a mild, transition metal free, visible light assisted, dealkylative amide formation from feedstock carboxylic acids and amines. The low absorption coefficient of the complex allows deep light penetration and thus scale up to a gram scale.

Multifarenes: new modular cavitands.

Multifarenes, a new class of macrocycles, which are constructed of alternating building blocks, are conveniently accessible by three complementary syntheses that provide modularity and scalability. In addition to metal-ion coordination, these cavitands show increased flexibility with increasing ring size, offering opportunities for induced fit to guest molecules.