Fractal characterizations of MeV ion treated CaF2 thin films.

We present the morphological evolution and fractal characterizations of CaF2 thin-film surfaces modified by bombardment with 100 MeV Au+8 ions at various fluences. Atomic force microscopy (AFM) combined with line profile and two-dimensional power spectral density (2D-PSD) analysis was utilized to investigate the evolution of surface morphology as a function of fluence. The AFM images were utilized to investigate the relationship between fractal dimension, roughness exponent, lateral correlation length, and ion fluence. The surface erosion owing to sputtering was depicted using Rutherford backscattering spectrometry. The structural characteristics' dependency on fluence was explored with the help of glancing angle x-ray diffraction measurements on virgin and irradiated samples. Tensile stress calculated using a peak shift in the glancing angle x-ray diffractogram showed an increase in tensile stress with fluence that caused the surface to crack after the fracture strength of the surface was crossed. 2D-PSD analysis signified the role of sputtering over surface diffusion for the observed surface modifications. Fractal dimensions first increased and then decreased with ion fluence. The lateral correlation length decreased, while the roughness exponent increased with fluence after the threshold value.

Carbonate treated coffee powder (CTCP) for selective sorption of Pu4+ over Am3+, Np4+, NpO22+, and PuO22+ from aqueous acidic solution: Investigation on mechanism, kinetics, thermodynamics, stripping and radiolytic stability.

An attempt was made for understanding the sorption behaviour of different actinide ions Pu4+, PuO22+, Am3+, Np4+, and NpO22+ on carbonate treated exhausted coffee powder (CTCP). Very efficient sorption of Pu4+ over other actinide ions from aqueous acidic medium was observed. Almost 4 h were required for achieving equilibrium. Experimental results for Pu+4 were fitted into different sorption isotherm model: Langmuir isotherm, Freundlich isotherm, D.R, isotherm and Temkin isotherm. Based on the linear regression, it was found that, Freundlich isotherm was predominantly operative. Pseudo 2nd order kinetics was found to be effective for the sorption of Pu+4. More than 80 % of loaded Pu4+ was found to desorb by 0.25 M oxalic acid solution. CTCP exhibited relatively good radiation stability. Sorption of Pu+4 on CTCP was exothermic, and spontaneous in nature. The sorption process was simple, cost effective and environmentally benign, as it did not involve any sophisticated, multi-step, sorbent synthesis.

Giant Orbital Anisotropy with Strong Spin-Orbit Coupling Established at the Pseudomorphic Interface of the Co/Pd Superlattice.

Orbital anisotropy at interfaces in magnetic heterostructures has been key to pioneering spin-orbit-related phenomena. However, modulating the interface's electronic structure to make it abnormally asymmetric has been challenging because of lack of appropriate methods. Here, the authors report that low-energy proton irradiation achieves a strong level of inversion asymmetry and unusual strain at interfaces in [Co/Pd] superlattices through nondestructive, selective removal of oxygen from Co3 O4 /Pd superlattices during irradiation. Structural investigations corroborate that progressive reduction of Co3 O4 into Co establishes pseudomorphic growth with sharp interfaces and atypically large tensile stress. The normal component of orbital to spin magnetic moment at the interface is the largest among those observed in layered Co systems, which is associated with giant orbital anisotropy theoretically confirmed, and resulting very large interfacial magnetic anisotropy is observed. All results attribute not only to giant orbital anisotropy but to enhanced interfacial spin-orbit coupling owing to the pseudomorphic nature at the interface. They are strongly supported by the observation of reversal of polarity of temperature-dependent Anomalous Hall signal, a signature of Berry phase. This work suggests that establishing both giant orbital anisotropy and strong spin-orbit coupling at the interface is key to exploring spintronic devices with new functionalities.

Enhanced Spin-to-Charge Conversion Efficiency in Ultrathin Bi2Se3 Observed by Spintronic Terahertz Spectroscopy.

Owing to their remarkable spin-charge conversion (SCC) efficiency, topological insulators (TIs) are the most attractive candidates for spin-orbit torque generators. The simple method of enhancing SCC efficiency is to reduce the thickness of TI films to minimize the trivial bulk contribution. However, when the thickness reaches the ultrathin regime, the SCC efficiency decreases owing to intersurface hybridization. To overcome these contrary effects, we induced dehybridization of the ultrathin TI film by breaking the inversion symmetry between surfaces. For the TI film grown on an oxygen-deficient transition-metal oxide, the unbonded transition-metal d-orbitals affected only the bottom surface, resulting in asymmetric surface band structures. Spintronic terahertz emission spectroscopy, an emerging tool for investigating the SCC characteristics, revealed that the resulting SCC efficiency in symmetry-broken ultrathin Bi2Se3 was enhanced by up to ∼2.4 times.

Impact of Spin-Orbit Torque on Spin-Transfer Torque Switching in Magnetic Tunnel Junctions.

The paper presents our simulated results showing the substantial improvement of both switching speed and energy consumption in a perpendicular magnetic tunnel junction (p-MTJ), a core unit of Spin-Transfer-Torque Magnetic Random Access Memory (STT-MRAM), by the help of additional Spin-Orbit-Torque (SOT) write pulse current (WPSOT). An STT-SOT hybrid torque module for OOMMF simulation is implemented to investigate the switching behavior of a 20 nm cell in the p-MTJ. We found that the assistance of WPSOT to STT write pulse current (WPSTT) have a huge influence on the switching behavior of the free layer in the p-MTJ. For example, we could dramatically reduce the switching time (tSW) by 80% and thereby reduce the write energy over 70% as compared to those in the absence of the WPSOT. Even a very tiny amplitude of WPSOT (JSOT of the order of 102 A/m2) substantially assists to reduce the critical current density for switching of the free layer and thereby decreases the energy consumption as well. It is worth to be pointed out that the energy can be saved further by tuning the WPSOT parameters, i.e., amplitude and duration along at the threshold WPSTT. Our findings show that the proposed STT-SOT hybrid switching scheme has a great impact on the MRAM technology seeking the high speed and low energy consumption.

Grading of Extraction and Its Relationship with Post-operative Pain and Trismus, along with Proposed Grading for Trismus.

BACKGROUND: Extraction of mandibular third molars are somewhat a matter of interest because of its malpositioning , curved roots, proximity to vital structures due to this the procedure is often associated with post operative complications like pain and trismus. The extraction of third molar was classified in four grads according to the difficulty of the procedure. AIMS: The purpose of this paper is to find any significant relationship between grading of extraction and post operative complications like pain and trismus. MATERIALS AND METHODS: A total number of 180 patients need to go for extraction of third molar was included in the study. The variables taken into account were grading of extraction, pain six hour post operatively trismus one day after extraction, and trismus five day after extraction. The four grades of extractions as described by Parent in 1974 were statistically analyzed by computing pearson product moment correlation coefficient with post operative pain and trismus first and fifth day to find any co relation between them. RESULTS: The grading of extraction was found significantly correlated with post operative pain, trismus one day after and fifth day of surgery.

Significance of radiological variables studied on orthopantamogram to pridict post-operative inferior alveoler nerve paresthesia after third molar extraction.

CONTEXT: Removal of impacted third molar is a procedure that is often associated with post-operative complications. The rate of complications is somewhat high because of its proximity to the vital structures. Inferior alveolar nerve paresthesia is one of the common complications of impacted their molar surgery. This is due to intimate relationship between roots of mandibular third molar and inferior alveolar canal. To access the proximity of inferior alveolar canal to third molar many diagnostic methods are suggested but in conventional radiography orthopantamogram is considered as the best. There are many findings onorthopantamogram that are suggestive of close proximity of nerve to the canal. In this study authors reviewed seven radiographic findings related to proximity of roots to the inferior alveolar nerve as seen on orthopantamogram and try to find a relationship between these radiographic variables and presence of post-operative paresthesia. STUDY DESIGN: The study containd 100 impacted third molars need to be removed. Presence of radiographic findings on orthopantamogram were noted and analyzed, to find a relationship with occurrence of post-operative inferior alveolar nerve paresthesia. MATERIALS AND METHODS: This study comprises of 100 impacted third molar teeth indicated for extraction. Cases were randomly selected from the patients, needs to undergo extraction of impacted mandibular third molar. After extraction cases were evaluated for occurrence of inferior alveolar nerve paresthesia. Stastical Analyisis: Data was transferred to SPss 21 software for frequency calculation, and two tailed p-values were obtained betweens these variables and post-operative paresthesia, by applying Fischer's exact test (GRAPH PAD SOFTWARE). RESULTS: Out of seven, four radiological findings that are grooving of roots, hooked roots, bifid roots and obliteration of white line are significantly related to post-operative paresthesia while bending of canal, narrow canal and darkening of tooth roots over the canal are not significantly associated with post-operative morbidity of facial nerve.

Adenoid cystic carcinoma of buccal mucosa.

Adenoid cystic carcinoma is a malignant neoplasm most commonly originating in salivary glands of head and neck region. Here we present a case report of a 50 year old male who was diagnosed with adenoid cystic carcinoma of the right buccal mucosa. The peculiarity of the lesion and the approach we made is the key factor in the presentation.