Root coverage of multiple gingival recessions treated with coronally advanced flap associated with xenogeneic acellular dermal matrix or connective tissue graft: a 6-month split-mouth controlled and randomized clinical trial.

OBJECTIVES: This study aimed to compare xenogeneic dermal matrix (XDM) to connective tissue graft (CTG) associated with coronally advanced flap (CAF) in treating Miller's class I and II (RT1) multiple gingival recession in a split-mouth randomized clinical trial. MATERIALS AND METHODS: Fifteen patients with bilateral Miller's class I and II multiple recessions were selected. The patient's side receiving each treatment was randomly allocated to receive XDM or CTG. The clinical parameters were measured at baseline and 6 months of follow-up. RESULTS: At 6 months, no significant difference in the root coverage (RC) (95.28 ± 6.89% for CTG and 92.68 ± 7.35% for XDM) and the keratinized tissue (KT) gain (0.91 ± 0.46 mm for CTG and 0.74 ± 0.39 mm for XDM) was observed between groups (p > 0.05). The CTG group presented higher complete root coverage (CRC) than XDM (60% and 33%, respectively) (p = 0.045). Multiple logistic regression indicated that the XDM (p = 0.01) and the XDM and KT interaction (p = 0.02) negatively interfered in the CRC. A 1-mm increase in the baseline KT when using XDM increases almost 6 times the chance of achieving CRC, and XDM reached a similar CRC probability to CTG when the receptor area presented at least 2 mm of KT. CONCLUSIONS: Both treatments were effective for treating multiple gingival recession; similar KT gain, GR reduction, and RC were obtained for CTG and XDM, while CTG promoted higher CRC than XDM. Moreover, the amount of KT at baseline was determinant for CRC when treating multiple gingival recession with XDM. CLINICAL RELEVANCE: XDM produces limited CRC in sites with a reduced amount of KT. TRIAL REGISTRATION: Brazilian Clinical Trials Registry (REBEC) number RBR-56NZQ6.

Influence of abutment angulation on loss of prosthetic abutment torque under mechanical cycling.

STATEMENT OF PROBLEM: Internal conical connections provide mechanical stability for the prosthetic abutment and implant connection. However, some clinical situations require the use of angled prosthetic abutments that may increase stress on supportive implants by difference force vectors under cyclic loading. PURPOSE: The purpose of this in vitro study was to measure the screw loosening values of prosthetic abutments with internal conical connections (indexed and nonindexed) having different angles under mechanical cycling. MATERIAL AND METHODS: Thirty-six implants (4.0×13 mm, Titamax) with internal conical connections and their respective universal prosthetic abutments (n=36, 3.5×3.3 mm) were divided into indexed and nonindexed groups (n=18) with abutment inclinations of 0 (straight), 17, and 30 degrees. An insertion torque of 15 Ncm was applied according to the manufacturer's specifications. The specimens underwent fatigue testing of 500 000 cycles at a frequency of 2 Hz with a dynamic compressive load of 120 N at an angle of 30 degrees. The detorque values were measured by using a digital torque meter and tabulated for statistical analyses. RESULTS: The specimens with indexed abutments had mean ±standard deviation detorque values of 6.72 ±2.29 Ncm under mechanical cycling, whereas those with nonindexed abutments had values of 8.98 ±1.84 Ncm. In the indexed group, the lowest detorque value was observed for abutments at 30 degrees compared with the straight group (P<.05). As for nonindexed abutments, similar detorque values were observed after increasing the abutment inclination (P>.05). CONCLUSIONS: A decrease in detorque values in the indexed abutments related to their inclination was found under mechanical cycling, whereas the prosthetic abutments with 30 degrees of angulation had the lowest values. No decrease was found in the nonindexed abutments.

Clinical and tomographic comparison of dental implants placed by guided virtual surgery versus conventional technique: A split-mouth randomized clinical trial.

AIM: Our objective was to compare guided virtual surgery to conventional surgery in terms of angular deviation of single dental implants placed in the posterior mandible. MATERIALS AND METHODS: Patients with bilateral homologous single teeth missing in the posterior mandible were eligible for this split-mouth randomized clinical trial. Cone beam computed tomography (CBCT) was performed for virtual planning of implant position and manufacturing of the stereolithographic guides. One week after the surgery, a second CBCT scan was superimposed to the initial planning. Primary endpoint was the angular deviation between virtual and clinical implant position. Secondary endpoints were linear deviations and patient-reported outcomes collected with a questionnaire. RESULTS: Data from 12 patients were available for analysis. Angular deviation was significantly lower using stereolithographic guides as compared to conventional guides (2.2 ± 1.1° vs. 3.5 ± 1.6°, p = .042). Linear deviations were similar for both techniques in the coronal (2.34 ± 1.01 vs. 1.93 ± 0.95 mm) and apical (2.53 ± 1.11 vs. 2.19 ± 1.00 mm) dimensions (p Ëƒ .05). The selection of the surgical technique had no significant impact on the patient-reported outcomes. CONCLUSION: Our data suggest that the angular discrepancy between the virtual and the clinical implant position is slightly lower when using stereolithographic guides as compared to conventional guides.

Meta-analysis of the predictive value of DNA aneuploidy in malignant transformation of oral potentially malignant disorders.

DNA aneuploidy is an imbalance of chromosomal DNA content that has been highlighted as a predictor of biological behavior and risk of malignant transformation. To date, DNA aneuploidy in oral potentially malignant diseases (OPMD) has been shown to correlate strongly with severe dysplasia and high-risk lesions that appeared non-dysplastic can be identified by ploidy analysis. Nevertheless, the prognostic value of DNA aneuploidy in predicting malignant transformation of OPMD remains to be validated. The aim of this meta-analysis was to assess the role of DNA aneuploidy in predicting malignant transformation in OPMD. The questions addressed were (i) Is DNA aneuploidy a useful marker to predict malignant transformation in OPMD? (ii) Is DNA diploidy a useful negative marker of malignant transformation in OPMD? These questions were addressed using the PECO method. Five studies assessing aneuploidy as a risk marker of malignant change were pooled into the meta-analysis. Aneuploidy was found to be associated with a 3.12-fold increased risk to progress into cancer (RR=3.12, 95% CI 1.86-5.24). Based on the five studies meta-analyzed, "no malignant progression" was more likely to occur in DNA diploid OPMD by 82% when compared to aneuploidy (RR=0.18, 95% CI 0.08-0.41). In conclusion, aneuploidy is a useful marker of malignant transformation in OPMD, although a diploid result should be interpreted with caution.

Locally applied statins as adjuvants to non-surgical periodontal treatment for chronic periodontitis: a systematic review and meta-analysis.

OBJECTIVE: This review aimed at evaluating the effects of chronic periodontitis (CP) treatment with local statins as adjuncts to scaling and root planing (SRP), compared with SRP alone or with placebo. METHODS: Electronic and hand searches were conducted in three databases to select randomized controlled trials (RCTs) comparing SRP + statins versus SRP alone. Random effects models were conducted to determine the clinical attachment level (CAL) gain as the primary outcome variable, and probing pocket depth (PPD) reduction, modified sulcus bleeding index (mSBI), and intrabony defect depth (IBD) as the secondary outcomes. RESULTS: Of the 526 papers identified, 15 articles met the criteria for inclusion in this systematic review, and 13 in the meta-analysis. The meta-analysis showed a statistically significant CAL gain (mean differences [MD] = 1.84 mm, 95% confidence interval [CI] = 1.45 to 2.23; p = 0.000), PPD reduction (MD = 1.69 mm, 95% CI = 1.37 to 2.04; p = 0.000), mSBI change (MD = 0.70, 95% CI = 0.57 to 0.84; p = 0.000), and IBD (MD = 1.48, 95% CI = 1.30 to 1.67; p = 0.000) attributed to SRP + statin treatment (6 months). CONCLUSION: Within the limitations of this study, the collective evidence emerging from this systematic review and meta-analysis may support the use of locally applied statins as adjuncts to SRP in CP treatment, based on being an easy, low-cost alternative, with lesser adverse effects on bacterial resistance. These results should be interpreted with caution. CLINICAL RELEVANCE: Clinicians might consider the use of SRP + statins as an adjunct over other alternative approaches, based on the results of the present review. The informed decision should be taken, considering the patient's values and preferences, and the intervention to be implemented by the clinician.

Influence of Transmucosal Height on Loss of Prosthetic Abutment Torque After Mechanical Cycling.

The aim of this study was to measure and record the universal transmucosal abutment height, and then evaluate whether it influenced loosening of the abutment screw by analyzing the torque and detorque values after mechanical cycling. Thirty-six implants, model CM Unitite, with internal conical connections (3.5 × 10 mm) and respective universal prosthetic abutments (n = 36, 3.25 × 6 mm), were divided into three groups (n = 12 each) with respective transmucosal heights of 0.8, 3.5, and 5.5 mm. Insertion torque of 20 Ncm was used in accordance with the manufacturer's specifications. Afterward, the samples were submitted to fatigue tests consisting of 500,000 cycles at a frequency of 2Hz, a dynamic compressive load of 120N, and an angle of 30°. The detorque values were measured with a digital torque meter and tabulated to perform statistical analyses; a level of significance of 5% was adopted. The mean detorque values (SD) obtained were 22.83 (6.30), 22.5 (5.45), and 19.41 (4.69) Ncm for transmucosal abutments with heights of 0.8, 3.5, and 5.5 mm, respectively, and showed no statistically significant difference ( P = .262). The authors of this study concluded that the transmucosal height of prosthetic abutments submitted to mechanical fatigue did not influence the detorque values.

Effect of a single-tufted toothbrush on the control of dental biofilm in orthodontic patients: A randomized clinical trial.

OBJECTIVE: To compare the effect of a single-tufted toothbrush combined or not with a conventional toothbrush to control dental biofilm in healthy orthodontic patients. MATERIALS AND METHODS: Twenty orthodontic patients were randomly assigned to receive three different treatments: Group 1-conventional toothbrush; Group 2-single-tufted toothbrush and Group 3-combination of single-tufted and conventional toothbrushes. Stained plaque index (SPI), visible plaque index (VPI) and gingival bleeding index (GBI) were recorded. The data were analysed by Kolmogorov-Smirnov test. Wilcoxon test was used for intragroup comparison and Friedman test for the intergroup comparison (α = 5%). RESULTS: Intragroup analysis showed that VPI and SPI significantly decreased (P < 0.05) after 72 hour in Group 3. Anterior and posterior teeth did not show any significant statistical differences after 72 hour (P > 0.05), but VPI values in the labial surfaces were different to Group 3 (P < 0.05) in comparison with the other groups after 72 hour. Group 3 showed a statistically significant reduction (P < 0.05) for SPI in the interproximal surfaces when compared with Group 1. CONCLUSION: The combination of single-tufted and conventional toothbrushes was effective for controlling dental biofilm formation in orthodontic patients.

In Vitro Microbiological Analysis of Bacterial Seal in Hybrid Zirconia Abutment Tapered Connection.

PURPOSE: The aim of this study was to evaluate the bacterial seal at the implant-hybrid zirconia abutment interface and Morse taper-type connections through in vitro microbiological analysis. MATERIALS AND METHODS: Sixteen implants and their respective abutments were divided into 3 groups: test (10 sets), positive control (3 sets), and negative control (3 sets). In the test group, 10 implants were contaminated with Escherichia coli using a sterile inoculating loop to the inner portion of the implants, followed by torque application to the abutment (30 N·cm). The positive controls were also contaminated, but no torque was applied to the abutment screw. The negative control consisted of uncontaminated sets. All specimens were immersed in test tubes containing 5 mL brain heart infusion (BHI) broth, maintained in a microbiological incubator for 14 days at 37°C under aerobic conditions, and monitored every 24 hours for evidence of bacterial growth. RESULTS: During the 14 days of incubation, no significant increase in the number of cloudy culture media was observed in the test group (P = 0.448). No significant difference in broth turbidity ratio was observed (P > 0.05). CONCLUSION: Hybrid zirconia abutments can create an effective seal at the tapered abutment-implant interface with a 30-N·cm installation torque.

Microwave radiation is effective at disinfecting dental stone surfaces without changing their physical properties.

The aims of this study were to evaluate the effectiveness of different microwave radiation regimens for disinfection of type IV dental stone surfaces and to assess the influence of these regimens on surface roughness and dimensional change following disinfection. Three hundred cylindrical (20 × 2-mm) test specimens were made in type IV stone and divided into subgroups of 20 according to the microorganisms tested (Staphylococcus aureus, Escherichia coli, or Candida albicans) and the 900-W microwave radiation protocol (cycles of 3, 5, or 7 minutes; a positive control; or a negative control). To test physical changes, 80 test specimens were made with the same dimensions except that they had 2 parallel and symmetrical indentations measuring 8 × 4 mm. These specimens were divided into 4 subgroups of 20 each (a subgroup for each radiation time and a negative control). The mean dimensional change and roughness data were analyzed by mixed models for repeated measures and Tukey-Kramer tests. Disinfection was analyzed with descriptive statistics. For E coli and C albicans, all radiation times proved effective at sterilizing the test specimens. For S aureus, sterilization was achieved with 5 and 7 minutes of exposure; however, colonies were observed in 10 Petri dishes (50%) exposed to 3 minutes of microwave radiation. No statistically significant difference in dimensional change or surface roughness was observed for any radiation regimen (P > 0.05).

Biomechanical and histomorphometric analysis of osseodensification drilling versus conventional technique: a systematic review and meta-analysis.

OBJECTIVES: This systematic review aimed to search the literature for the answer to the following questions. In human studies: Does the osseodensification technique increase the resonance frequency analysis given in implant stability quotient value and the insertion torque value compared to the conventional technique? In animal studies: Does the osseodensification technique increase implant stability quotient, bone-to-implant contact, and bone area fraction occupancy values over the conventional technique? DATA SOURCES: A search for studies was carried out in eight databases until August 2021. Out of the 447 publications found, 11 were included. RESULTS: In human studies, osseodensification technique showed better results for implant stability quotient values with a summarized median difference of 8.57. As for secondary stability, there was no significant difference, with summarized median difference of 4.49 in favor of the osseodensification technique. In animal studies, all results were favorable to the osseodensification technique. Regarding insertion torque, bone-to-implant contact, and bone area fraction occupancy between counterclockwise osseodensification technique vs conventional, the mean difference was 46.79 for insertion torque, 2.17 for bone-to-implant contact, and 2.11 for bone area fraction occupancy. High heterogeneity was observed between the studies. The risk of bias in humans was moderate in three studies and low in one; and in animal studies, four presented moderate risk, two low risk, and one high risk. The certainty of evidence ranged from low to moderate. CONCLUSION: The osseodensification technique showed improvement concerning the resonance frequency and the insertion torque value of implants in human studies. In addition, it increased the values of bone-to-implant contact, bone area fraction occupancy, and implant stability quotient in animal studies, when compared to the conventional technique.

Collagen Matrix for Increasing Peri-implant Mucosal Thickness in Smokers: A Prospective Case Series.

This prospective case series aimed to evaluate the feasibility of using a volume collagen matrix for soft tissue augmentation to increase mucosal thickness in single implants in smokers who consume more than 10 cigarettes per day. Participants had single submerged implants necessitating soft tissue thickening. Soft tissue augmentation was done using a collagen matrix in the second-stage surgery. The primary outcome was soft tissue thickness at 90 days post-surgery. Secondary outcomes included median thickness at 30 and 60 days, changes in buccal soft tissue profile (digital measurements) at 30, 60, and 90 days, and oral health-related quality of life using OHIP-14 up to 90 days post-surgery. Pain levels via VAS scale and adverse effects were also assessed. Ten participants (4 men, 6 women) aged 45.2 ± 13.18 years initially smoked 10-20 cigarettes daily (average: 14.70 ± 3.47 cigarettes/day). After 90 days, median soft tissue thickness increased to 3.00 (2.00;3.00) mm. Buccal soft tissue profile (median change in ROI) increased by 0.40 (0.25;0.62) mm at 90 days. Pain levels decreased, and oral health-related quality of life improved significantly. No complications were reported. The collagen matrix significantly augmented buccal soft tissue thickness at implant sites in smokers (>10 cigarettes/day), with favorable outcomes and no complications.

Use of Local Melatonin with Xenogeneic Bone Graft to Treat Critical-Size Bone Defects in Rats with Osteoporosis: A Randomized Study.

The aim of this study was to evaluate the effect of local administration of melatonin (MLT) on molecular biomarkers and calvaria bone critical defects in female rats with or without osteoporosis, associated or not with a xenogeneic biomaterial. Forty-eight female rats were randomly divided into two groups: (O) ovariectomized and (S) placebo groups. After 45 days of osteoporosis induction, two critical-size defects (5 mm diameter) were created on the calvaria. The groups were subdivided according to the following treatment: (C) Clot, MLT, MLT associated with Bio-Oss® (MLTBO), and Bio-Oss® (BO). After 45 days, the defect samples were collected and processed for microtomography, histomorphometry, and biomolecular analysis (Col-I, BMP-2, and OPN). All animals had one femur harvested to confirm the osteoporosis. Microtomography analysis demonstrated a bone mineral density reduction in the O group. Regarding bone healing, the S group presented greater filling of the defects than the O group; however, in the O group, the defects treated with MLT showed higher mineral filling than the other treatments. There was no difference between the treatments performed in the S group (p = 0.05). Otherwise, O-MLT had neoformed bone higher than in the other groups (p = 0.05). The groups that did not receive biomaterial demonstrated lower levels of Col-I secretion; S-MLT and S-MLTBO presented higher levels of OPN, while O-C presented statistically lower results (p < 0.05); O-BO showed greater BMP-2 secretion (p < 0.05). In the presence of ovariectomy-induced osteoporosis, MLT treatment increased the newly formed bone area, regulated the inflammatory response, and increased OPN expression.

Finishing and polishing systems influence the roughness and color stability of acrylic and bis-acryl composite resins.

Background: To evaluate the effect of different finishing and polishing systems on the surface roughness and color changes of bis-acryl (Protemp 4 - 3M ESPE- St. Paul, USA; Structur 3 - Voco, Cuxhaven, Germany) and chemically activated acrylic materials (Duralay - Reliance, SP, Brazil). Material and Methods: Specimens (10 x 2 mm) thick were prepared for each material. The specimens were subjected to polishing and finishing procedures with aluminum oxide discs (Diamond Master - FGM, Joinville, Santa Catarina, Brazil) and spiral rubber disks (Sof-Lex - 3M ESPE, Germany). The control did not receive any polishing and finishing procedures. Surface roughness and color measurement values were obtained after the finishing and polishing procedures and immediately after 30 days of storage in water, coffee, and red wine. Data for each material were analyzed by One-Way ANOVA (p<0.05). Results: The polishing with aluminum oxide discs was able to affect the initial surface roughness values of chemically activated acrylic material (p<0.05). After immersion in staining solutions, lower ∆E values were only observed for the bis-acryl composite resins compared to the control group (p<0.05). Conclusions: The finishing and polishing systems influenced the surface roughness and color stability of the materials tested. The chemically activated acrylic resin showed lower surface roughness and higher color stability than the bis-acryl materials. Key words:Acrylic resin, bis-acryl resin, provisional restoration.

Titanium dioxide nanotubes applied to conventional glass ionomer cement influence the expression of immunoinflammatory markers: An in vitro study.

Objectives: To assess the impact of different concentrations TiO2-nt incorporated into a glass ionomer cement on the proliferation, mitochondrial metabolism, morphology, and pro- and anti-inflammatory cytokine production of cultured fibroblasts (NIH/3T3), whether or not stimulated by lipopolysaccharides (LPS-2 µg/mL, 24 h). Methods: TiO2-nt was added to KM (Ketac Molar EasyMix™, 3 %, 5 %, 7 % in weight); unblended KM was used as the control. The analyses included: Cell proliferation assay (n = 6; 24/48/72h); Mitochondrial metabolism assay (n = 6; 24/48/72h); Confocal laser microscopy (n = 3; 24/48/72h); Determination of biomarkers (IL-1ß/IL-6/IL-10/VEGF/TNF) by using both multiplex technology (n = 6; 12/18 h) and the quantitative real-time PCR assay (q-PCR) (n = 3, 24/72/120 h). The data underwent analysis using both the Shapiro-Wilk and Levene tests, and by generalized linear models (α = 0.05). Results: It demonstrated that cell proliferation increased over time, regardless of the presence of TiO2-nt or LPS, and displayed a significant increase at 72 h; mitochondrial metabolism increased (p < 0.05), irrespective of exposure to LPS (p = 0.937); no cell morphology changes were observed; TiO2-nt reverted the impact of KM on the secreted levels of the evaluated proteins and the gene expressions in the presence of LPS (p < 0.0001). Conclusions: TiO2-nt did not adversely affect the biological behavior of fibroblastic cells cultured on GIC discs.

One stage, full-mouth, ultrasonic debridement in the treatment of severe chronic periodontitis in smokers: a preliminary, blind and randomized clinical trial.

OBJECTIVE: The aim of this clinical trial was to assess the performance of a full-mouth ultrasonic debridement protocol in the treatment of severe chronic periodontitis in comparison with scaling and root planing in a quadrant-wise procedure in smokers. MATERIALS AND METHODS: The trial consisted of 30 participants presenting with periodontitis divided into 3 groups: Group FMUD - full-mouth ultrasonic debridement, i.e., one session of 45 minutes of ultrasonic instrumentation for smokers (n = 10), Group SRP- scaling and root planing performed in a quadrant-wise manner for smokers (n = 10), and Group Control - SRP for nonsmokers (n = 10), treated following the same protocol as the SRP group. The parameters evaluated were: plaque/bleeding on probing indices, probing pocket depth, relative recession, and relative probing attachment level at baseline, 45, 90 and 180 days after therapy. RESULTS: Full-mouth ultrasonic debridement and scaling and root planing resulted in comparable gain of attachment 6 months after therapy. Both groups exhibited probing pocket depth reduction at all experimental periods as compared to baseline. Smokers, however, had less probing pocket depth reduction and relative probing attachment level gain compared to non-smokers, despite the mechanical protocol used (p < 0.05). Moreover, at 180 days, nonsmokers presented with fewer sites requiring re-treatment (probing pocket depth > 5 mm and bleeding on probing) than smokers (p < 0.05). CONCLUSIONS: Full-mouth ultrasonic debridement and scaling and root planing result in comparable clinical outcomes for the treatment of smokers with severe chronic periodontitis. Despite the non-surgical technique used, smokers had a less favorable clinical response than non-smokers.

Evaluation of soft tissues around single tooth implants in the anterior maxilla restored with cemented and screw-retained crowns.

Implant-supported restorations can be attached as screw-retained or cemented prostheses. In both situations, the characteristics of the soft tissues around the implants are crucial for oral rehabilitation and patient satisfaction. Therefore, this study uses the Pink Esthetic Score (PES), which allows evaluation of gingival esthetics around implants, to evaluate the soft tissues around implants in the anterior maxilla rehabilitated with cemented prostheses (CP) and screw-retained prostheses (SP). Forty implants placed in the anterior maxilla were evaluated, and these had been rehabilitated with prosthetic crowns for a minimum of 1 year. Periodontal examination was performed to evaluate probing depth (PD) and bleeding on probing (BOP) of the implant and the corresponding natural tooth. The total mean (±SD) PES for SP was 10.73 (±1.98) and 10.41 (±2.67) for CP, which was not statistically significant (P ≥ .05). Periodontal examination revealed that CP and SP showed no difference for BOP (P ≥ .05). Differences were only detected in PD when comparing the reference teeth of both groups to CP and SP (P ≤ .05). The present study demonstrates that the PES proved to be an efficient index to assess peri-implant tissues, and that the type of crown retention does not influence the health and quality of the soft tissues around implants.

Influence of melatonin associated with the Bio-Gide® membrane on osteoblast activity: an in vitro Study.

Melatonin (MLT) is a hormone responsible for regulating several physiological processes. It has been shown that MLT can be an important mediator in bone formation and stimulation, promoting osteoblast differentiation. In clinical practice, in tissue regeneration procedures, it is necessary to use membranes or barriers, associated with biomaterials, or not. The aim of this in vitro study was to assess the effect of melatonin on the activity of osteoblastic cells, associated, or not, with a resorbable collagen membrane (Bio-Gideä). For this, mice-derived pre-osteoblastic cells MC3T3 obtained from the ATCC (American Type Culture Collection) were used. Cultured cells were subject to the following treatments: MLT with a concentration of 1mM, a Bio-Gideä membrane and a membrane associated with MLT (Bio-Gideä + MLT). Proliferation and cell viability assays and protein lysate (ELISA test) quantification for the BMP-2 protein were carried out, in periods of 72 hours, 7 days and 10 days. After analyzing the data (one-way ANOVA, alpha=5%) it was observed that when MLT was used in isolation, there was an increase in cell proliferation and viability in osteoblastic cells (p<0.05). But, when MLT was associated with resorbable membranes, there was an inverse behavior, both in terms of proliferation and viability (p<0.05). In the case of the ELISA test, no secretion of BMP-2 was detected in any of the analyzed groups. It is concluded that MLT has a stimulatory effect on osteoblasts, but, when associated with Bio-Gideä resorbable membranes, it does not show any viable action in osteoblastic cell stimulation.

A melatonina (MLT) é um hormônio responsável pela regulação de diversos processos fisiológicos no nosso organismo. Tem sido demonstrado que a melatonina possa ser um importante mediador na formação e estimulação óssea, promovendo a diferenciação dos osteoblastos. Clinicamente, para o procedimento de regeneração tecidual, faz-se necessário a utilização de membranas ou barreiras, associadas ou não a biomateriais. Assim, o objetivo deste estudo in vitro foi avaliar o efeito da melatonina na atividade de células osteoblásticas, associada ou não a uma membrana de colágeno reabsorvível (Bio-Gide®). Para isto foram utilizadas células pré-osteoblásticas MC3T3 do ATCC (American Type Culture Collection), de camundongos. As células em cultura foram submetidas aos seguintes tratamentos: MLT na concentração de 1mM, membrana Bio Gide® e membrana associada à MLT (Bio-Gide® + MLT). Foram realizados os ensaios de proliferação e viabilidade celular e quantificação do lisado proteico (teste ELISA), para a proteína BMP-2, nos períodos de 72 horas, 7 e 10 dias. Após a análise dos dados (ANOVA um critério, alfa=5%) pode-se observar que a MLT quando utilizada sozinha, resultou em um aumento na proliferação e viabilidade celular nas células osteoblásticas (p<0,05). Entretanto, quando a MLT foi associada à membrana reabsorvível foi observado um comportamento inverso, tanto na proliferação quanto na viabilidade (p<0,05). Para o teste ELISA realizado, não houve secreção detectável de BMP-2 para nenhum grupo analisado. Conclui-se que a melatonina possui uma ação estimuladora nos osteoblastos, mas quando associada à membrana reabsorvível Bio-Gide®, não demonstra uma ação viável na estimulação de células osteoblásticas.

Histologic and histomorphometric analysis of two biomaterials of xenogenous origin for maxillary sinus elevation: a clinical study.

Objective: This study analyzed two xenogenous biomaterials based on deproteinized bovine bone mineral applied for maxillary sinus elevation. Method and materials: Fourteen patients were submitted to maxillary sinus augmentation with one of the following biomaterials: Criteria Lumina Bone Porous (test group) or Geistlich Bio-Oss (control group), both of large granules (1 to 2 mm). After 6 months, trephine biopsies were collected at the time of implant placement: 27 samples (11 patients) in the test group; 7 samples (3 patients) in the control group. Biopsies were analyzed by descriptive histology and histomorphometry, in which the percentages of newly formed bone, residual biomaterial particles, and connective tissue were evaluated. Results: Histomorphometry showed means for test and control groups, respectively, of 32.41% ± 9.42% and 26.59% ± 4.88% for newly formed bone, 22.89% ± 4.58% and 25.00% ± 4.81% for residual biomaterial, and 44.70% ± 9.54% and 48.41% ± 3.36% for connective tissue. There were no differences between groups (P > .05). Conclusion: This study concluded that Criteria Lumina Bone Porous presented similar histologic and histomorphometric characteristics to Geistlich Bio-Oss 6 months after sinus elevation surgery, identifying the tested biomaterial as an interesting alternative for bone augmentation in the maxillary sinus.

Evidence that metyrapone in the presence of inflammation modulates cytokine mRNA expression.

OBJECTIVE: Metyrapone (MT) has been used clinically to decrease glucocorticoid levels in human and animal studies. However, the potential effects of MT in the presence of inflammation are poorly understood. Thus, the aim of this study was to evaluate the effects of the administration of MT on the mRNA levels of pro-inflammatory cytokines in the presence of inflammation induced by the well-established model of ligature-induced periodontitis in rats. MATERIAL AND METHODS: Sixty animals were randomly assigned into three experimental groups of 20 rats each: G1-control; G2-periodontal disease (PD) induced by cotton ligature; G3-PD associated with 3 daily doses of MT (50mg/kg/3×3h). After 30 days, all animals were killed by decapitation. Blood samples were taken and the concentrations of corticosterone and catecholamines measured. Marginal tissues around ligated and non-ligated teeth were harvested and gene expression was assessed by quantitative polymerase chain reaction technique (qPCR). Moreover, the area of interradicular bone loss (ABL) was histometrically determined. RESULTS: Data analysis showed that: (i) ligature placement resulted in a significant ABL, as compared to non-ligated sites of G1 group; (ii) mRNA levels of all the pro-inflammatory factors assessed (INF-γ, TNF-α, IL-1ß and IL-6) were increased in the PD group (G2) (p<0.05) when compared to G1; (iii) there were no significant differences in corticosterone and catecholamine plasmatic levels between the three groups; (iv) MT administration, in the presence of inflammation, induces an increased ABL and significantly increased mRNA levels of all pro-inflammatory cytokines analyzed (p<0.05). CONCLUSION: Within the limits of this study, it can be concluded that MT in the presence of inflammation may modulate expression of pro-inflammatory cytokines, regardless of its effect on plasma corticosterone levels.

Inflammatory cell profile using different autologous fibrin protocols.

Autologous fibrin has been widely used in surgical procedures for both soft and hard tissue repair. There are different protocols and devices to obtain this matrix, with varying centrifugal time, gravity force, speed, angle of the sample tube and spinning radius. The aim of this study was to compare three methods of obtaining autologous fibrin: L-PRF using the Intra-Spin L-PRF centrifuge (Dohan protocol), the advanced PRF (A-PRF) using the Intra-Spin L-PRF centrifuge and autologous leukocyte fibrin (ALF), using the Kasvi centrifuge. Venous blood was collected from 7 healthy volunteers, which were submitted to the 3 different methods of centrifugation. The membranes were tissue-processed and evaluated by immunohistochemistry for CD3, CD20, CD68 and CD138. For CD68+, a lower number of cells was immunolabelled in the L-PRF group when compared to the other groups (A-PRF and ALF). For CD3+, a lower number of immunolabellated cells was observed in the ALF group when compared to the remaining groups (p < 0.05). In the A-PRF group, the CD20+ cell count was lower than in the remaining groups. No difference was observed in CD138+ cell counts between the groups. The 3 protocols tested are suitable for obtaining autologous fibrin membranes.