Bone Marrow-Derived Mononuclear Cells in the Treatment of Neurological Diseases: Knowns and Unknowns.

Bone marrow-derived mononuclear cells (BMMNCs) have been used for decades in preclinical and clinical studies to treat various neurological diseases. However, there is still a knowledge gap in the understanding of the underlying mechanisms of BMMNCs in the treatment of neurological diseases. In addition, prerequisite factors for the efficacy of BMMNC administration, such as the optimal route, dose, and number of administrations, remain unclear. In this review, we discuss known and unknown aspects of BMMNCs, including the cell harvesting, administration route and dose; mechanisms of action; and their applications in neurological diseases, including stroke, cerebral palsy, spinal cord injury, traumatic brain injury, amyotrophic lateral sclerosis, autism spectrum disorder, and epilepsy. Furthermore, recommendations on indications for BMMNC administration and the advantages and limitations of BMMNC applications for neurological diseases are discussed. BMMNCs in the treatment of neurological diseases. BMMNCs have been applied in several neurological diseases. Proposed mechanisms for the action of BMMNCs include homing, differentiation and paracrine effects (angiogenesis, neuroprotection, and anti-inflammation). Further studies should be performed to determine the optimal cell dose and administration route, the roles of BMMNC subtypes, and the indications for the use of BMMNCs in neurological conditions with and without genetic abnormalities.

N-terminal LysSN-His-tag improves the production of intracellular recombinant protein in Bacillus subtilis.

Choosing fusion tags to enhance the recombinant protein levels in the cytoplasm of Bacillus subtilis has been limited. Our previous study demonstrated that His-tag at the N-terminus could increase the expression levels of the low-expression gene egfp, while significantly reducing the high-expression genes gfp+ and bgaB in the cytoplasm of B. subtilis. In this study, we aimed to prove the potential of a fusion tag, the combination of the N-terminal domain of B. subtilis lysyl tRNA synthetase (LysSN) and His-tag with varying numbers of histidine (6xHis, 8xHis, 10xHis) by investigating their effects on the expression levels of egfp, gfp+ and bgaB in B. subtilis. For the low-expression gene, LysSN-xHis-tag could enhance the fluorescent intensity of EGFP 23.5 times higher than EGFP without a fusion tag, and 1.5 times higher than that fused with only His-tag. For high-expression genes, the expression level of BgaB and GFP+ was 2.9 and 12.5 times higher than that of His-tag, respectively. The number of histidines in LysSN-xHis-tag did not influence the expression levels of the high-expression genes but affected the expression levels of the low-expression gene.

Potent IPTG-inducible integrative expression vectors for production of recombinant proteins in Bacillus subtilis.

The IPTG-inducible promoter family, Pgrac, allows high protein expression levels in an inducible manner. In this study, we constructed IPTG-inducible expression vectors containing strong Pgrac promoters that allow integration of the transgene at either the amyE or lacA locus or both loci in Bacillus subtilis. Our novel integrative expression vectors based on Pgrac promoters could control the repression of protein production in the absence and the induction in the presence of an inducer, IPTG. The ß-galactosidase (BgaB) protein levels were 9.0%, 15% and 30% of the total cellular protein in the B. subtilis strains carrying single cassettes with the Pgrac01, Pgrac100 or Pgrac212 promoters, respectively. The maximal induction ratio of Pgrac01-bgaB was 35.5 while that of Pgrac100-bgaB was 7.5 and that of Pgrac212-bgaB was 9. The inducible expression of GFP and BgaB protein was stably maintained for 24 h, with the highest yield of GFP being 24% of cell total protein while the maximum amount of BgaB was found to be 38%. A dual integration of two copies of the gfp+ gene into the B. subtilis genome at the lacA and amyE loci resulted in a yield of about 40% of total cellular protein and a 1.74-fold increase in GFP compared with single-integrated strains containing the same Pgrac212 promoter. The capability of protein production from low to high levels of these inducible integrative systems is useful for fundamental and applied research in B. subtilis.

The tomato resistance gene Bs4 suppresses leaf watersoaking phenotypes induced by AvrHah1, a transcription activator-like effector from tomato-pathogenic xanthomonads.

The Xanthomonas transcription activator-like effector (TALE) protein AvrBs3 transcriptionally activates the executor-type resistance (R) gene Bs3 from pepper (Capsicum annuum), thereby triggering a hypersensitive cell death reaction (HR). AvrBs3 also triggers an HR in tomato (Solanum lycopersicum) upon recognition by the nucleotide-binding leucine-rich repeat (NLR) R protein Bs4. Whether the executor-type R protein Bs3 and the NLR-type R protein Bs4 use common or distinct signalling components to trigger an HR remains unclear. CRISPR/Cas9-mutagenesis revealed, that the immune signalling node EDS1 is required for Bs4- but not for Bs3-dependent HR, suggesting that NLR- and executor-type R proteins trigger an HR via distinct signalling pathways. CRISPR/Cas9-mutagenesis also revealed that tomato Bs4 suppresses the virulence function of both TALEs, the HR-inducing AvrBs3 protein and of AvrHah1, a TALE that does not trigger an HR in tomato. Analysis of AvrBs3- and AvrHah1-induced host transcripts and disease phenotypes in CRISPR/Cas9-induced bs4 mutant plants indicates that both TALEs target orthologous transcription factor genes to promote disease in tomato and pepper host plants. Our studies display that tomato mutants lacking the TALE-sensing Bs4 protein provide a novel platform to either uncover TALE-induced disease phenotypes or genetically dissect components of executor-triggered HR.

Modification of a PE/PPE substrate pair reroutes an Esx substrate pair from the mycobacterial ESX-1 type VII secretion system to the ESX-5 system.

Bacterial type VII secretion systems secrete a wide range of extracellular proteins that play important roles in bacterial viability and in interactions of pathogenic mycobacteria with their hosts. Mycobacterial type VII secretion systems consist of five subtypes, ESX-1-5, and have four substrate classes, namely, Esx, PE, PPE, and Esp proteins. At least some of these substrates are secreted as heterodimers. Each ESX system mediates the secretion of a specific set of Esx, PE, and PPE proteins, raising the question of how these substrates are recognized in a system-specific fashion. For the PE/PPE heterodimers, it has been shown that they interact with their cognate EspG chaperone and that this chaperone determines the designated secretion pathway. However, both structural and pulldown analyses have suggested that EspG cannot interact with the Esx proteins. Therefore, the determining factor for system specificity of the Esx proteins remains unknown. Here, we investigated the secretion specificity of the ESX-1 substrate pair EsxB_1/EsxA_1 in Mycobacterium marinum Although this substrate pair was hardly secreted when homologously expressed, it was secreted when co-expressed together with the PE35/PPE68_1 pair, indicating that this pair could stimulate secretion of the EsxB_1/EsxA_1 pair. Surprisingly, co-expression of EsxB_1/EsxA_1 with a modified PE35/PPE68_1 version that carried the EspG5 chaperone-binding domain, previously shown to redirect this substrate pair to the ESX-5 system, also resulted in redirection and co-secretion of the Esx pair via ESX-5. Our results suggest a secretion model in which PE35/PPE68_1 determines the system-specific secretion of EsxB_1/EsxA_1.

Poly(ethylene oxide) grafted silica nanoparticles: efficient routes of synthesis with associated colloidal stability.

In this study, poly(ethylene oxide) monomethyl ether (MPEO) of molecular weight of 5000, 10 000, and 20 000 g mol-1 were grafted onto colloidal silica nanoparticles (NPs) of a 27.6 nm diameter using two distinct "grafting to" processes. The first method was based on the coupling reaction of epoxide-end capped MPEO with amine-functionalized silica NPs, while the second method was based on the condensation of triethoxysilane-terminated MPEO onto the unmodified silica NPs. The influence of PEO molecular weight, grafting process and grafting conditions (temperature, reactant concentration, reaction time) on the PEO grafting density was fully investigated. Thermogravimetric analysis (TGA) was used to determine the grafting density which ranged from 0.12 chains per nm2 using the first approach to 1.02 chains per nm2 when using the second approach. 29Si CP/MAS NMR characterization indirectly revealed that above a grafting density value of 0.3 PEO chains per nm2, a dendri-graft PEO network was built around the silica surface which was composed of PEO chains directly anchored to the silica surface and those grafted to silica NPs by intermediate of >CH-O-Si- bonds. The colloidal stability of the particles during different steps of the grafting process was characterized by small-angle X-ray scattering (SAXS). We have found that the colloidal systems are stable whatever the achieved grafting density due to the strong repulsions between the NPs, with the strength of repulsion increasing with the molecular weight of the grafted MPEO chains.

Overproducing the BAM complex improves secretion of difficult-to-secrete recombinant autotransporter chimeras.

Monomeric autotransporters have been used extensively to transport recombinant proteins or protein domains to the cell surface of Gram-negative bacteria amongst others for antigen display. Genetic fusion of such antigens into autotransporters has yielded chimeras that can be used for vaccination purposes. However, not every fusion construct is transported efficiently across the cell envelope. Problems occur in particular when the fused antigen attains a relatively complex structure in the periplasm, prior to its translocation across the outer membrane. The latter step requires the interaction with periplasmic chaperones and the BAM (ß-barrel assembly machinery) complex in the outer membrane. This complex catalyzes insertion and folding of ß-barrel outer membrane proteins, including the ß-barrel domain of autotransporters. Here, we investigated whether the availability of periplasmic chaperones or the BAM complex is a limiting factor for the surface localization of difficult-to-secrete chimeric autotransporter constructs. Indeed, we found that overproduction of in particular the BAM complex, increases surface display of difficult-to-secrete chimeras. Importantly, this beneficial effect appeared to be generic not only for a number of monomeric autotransporter fusions but also for fusions to trimeric autotransporters. Therefore, overproduction of BAM might be an attractive strategy to improve the production of recombinant autotransporter constructs.

Photolabile Well-Defined Polystyrene Grafted on Silica Nanoparticle via Nitroxide-Mediated Polymerization (NMP).

Herein, the synthesis of a novel nitroxide-mediated polymerization (NMP) initiator bearing a photolabile ortho-nitrobenzyl (oNB) group allowing surface-initiated NMP preparation of well-defined photoresponsive polystyrene grafted on silica nanoparticles is described. The photocleavable and photoresponsive properties of the prepared materials are demonstrated using small angle X-ray scattering (SAXS) characterization.

EspH is a hypervirulence factor for Mycobacterium marinum and essential for the secretion of the ESX-1 substrates EspE and EspF.

The pathogen Mycobacterium tuberculosis employs a range of ESX-1 substrates to manipulate the host and build a successful infection. Although the importance of ESX-1 secretion in virulence is well established, the characterization of its individual components and the role of individual substrates is far from complete. Here, we describe the functional characterization of the Mycobacterium marinum accessory ESX-1 proteins EccA1, EspG1 and EspH, i.e. proteins that are neither substrates nor structural components. Proteomic analysis revealed that EspG1 is crucial for ESX-1 secretion, since all detectable ESX-1 substrates were absent from the cell surface and culture supernatant in an espG1 mutant. Deletion of eccA1 resulted in minor secretion defects, but interestingly, the severity of these secretion defects was dependent on the culture conditions. Finally, espH deletion showed a partial secretion defect; whereas several ESX-1 substrates were secreted in normal amounts, secretion of EsxA and EsxB was diminished and secretion of EspE and EspF was fully blocked. Interaction studies showed that EspH binds EspE and therefore could function as a specific chaperone for this substrate. Despite the observed differences in secretion, hemolytic activity was lost in all M. marinum mutants, implying that hemolytic activity is not strictly correlated with EsxA secretion. Surprisingly, while EspH is essential for successful infection of phagocytic host cells, deletion of espH resulted in a significantly increased virulence phenotype in zebrafish larvae, linked to poor granuloma formation and extracellular outgrowth. Together, these data show that different sets of ESX-1 substrates play different roles at various steps of the infection cycle of M. marinum.

Using the IPTG-Inducible Pgrac212 Promoter for Overexpression of Human Rhinovirus 3C Protease Fusions in the Cytoplasm of Bacillus subtilis Cells.

Expression and secretion of recombinant proteins in the endotoxin-free bacterium, Bacillus subtilis, has been thoroughly studied, but overexpression in the cytoplasm has been limited to only a few proteins. Here, we used the robust IPTG-inducible promoter, Pgrac212, to overexpress human rhinovirus 3C protease (HRV3C) in the cytoplasm of B. subtilis cells. A novel solubility tag, the N-terminal domain of the lysS gene of B. subtilis coding for a lysyl-tRNA synthetase was placed at the N terminus with a cleavage site for the endoprotease HRV3C, followed by His-HRV3C or His-GST-HRV3C. The recombinant protease was purified by using a Ni-NTA column. In this study, the His-HRV3C and His-GST-HRV3C proteases were overexpressed in the cytoplasm of B. subtilis at 11% and 16% of the total cellular proteins, respectively. The specific protease activities were 8065 U/mg for His-HRV3C and 3623 U/mg for His-GST-HRV3C. The purified enzymes were used to cleave two different substrates followed by purification of the two different protein targets, the green fluorescent protein and the beta-galactosidase. In conclusion, the combination of an inducible promoter Pgrac212 and a solubility tag allowed the overexpression of the HRV3C protease in the cytoplasm of B. subtilis. The resulting fusion protein was purified using a nickel column and was active in cleaving target proteins to remove the fusion tags. This study offers an effective method for producing recombinant proteins in the cytoplasm of endotoxin-free bacteria.

Adduction of ammonium to polylactides to modify their dissociation behavior in collision-induced dissociation.

RATIONALE: The goal of this work was to modify the dissociation pathways of polylactide (PLA) holding benzyl and hydroxyl terminations, in order to circumvent coincidence of product ions generated during collisional activation of sodiated chains, which prevented their reliable characterization. METHODS: Benzyl-, hydroxyl-terminated PLAs were ionized as ammonium adducts in positive ion mode electrospray and subjected to collision-induced dissociation (CID). Tandem mass spectrometry (MS/MS) experiments were conducted in a quadrupole time-of-flight (QTOF) instrument for safe assignment of product ions based on their elemental composition derived from accurate mass measurements. RESULTS: Adduction of ammonium to PLAs was found to induce chain fragmentation via charge-assisted processes, in great contrast to the charge-remote mechanisms experienced by sodiated molecules. The main reaction produced ions containing the ω termination only, hence allowing straightforward end-group determination. Other minor pathways were studied in detail to establish dissociation rules for ammoniated PLAs. Some reactions were found to be end-group specific, highlighting the higher reactivity of ammonium than alkali ion adducts. CONCLUSIONS: Changing the usually employed sodium-cationizing agent to ammonium was shown to induce dramatic changes in the CID behavior of PLAs. This was a simple and efficient approach to address issues encountered for end-group analysis of the particular PLA studied here.

Translocation across a self-healing block copolymer membrane.

Herein, a membrane prepared from the self-assembly of poly(styrene-co-acrylonitrile)-b-poly(ethylene oxide)-b-poly(styrene-co-acrylonitrile) micelles is found to exhibit translocation of nano-objects dispersed in aqueous solution. With the water flow as a driving force, temporary pores are created in between the micelles to facilitate the passage of nano-objects. These temporary pores close afterwards through a self-healing mechanism. As main results, polystyrene and silica nanoparticles exhibited a selective translocation directly influenced by their size and applied pressure.

Development of inducer-free expression plasmids based on IPTG-inducible promoters for Bacillus subtilis.

BACKGROUND: Besides Escherichia coli, Bacillus subtilis is an important bacterial species for the production of recombinant proteins. Recombinant genes are inserted into shuttle expression vectors which replicate in both E. coli and in B. subtilis. The ligation products are first transformed into E. coli cells, analyzed for correct insertions, and the correct recombinant plasmids are then transformed into B. subtilis. A major problem using E. coli cells can be the strong basal level of expression of the recombinant protein which may interfere with the stability of the cells. To minimize this problem, we developed strong expression vectors being repressed in E. coli and inducer-free in B. subtilis. RESULTS: In general, induction of IPTG-inducible expression vectors is determined by the regulatory lacI gene encoding the LacI repressor in combination with the lacO operator on the promoter. To investigate the inducer-free properties of the vectors, we constructed inducer-free expression plasmids by removing the lacI gene and characterized their properties. First, we examined the ability to repress a reporter gene in E. coli, which is a prominent property facilitating the construction of the expression vectors carrying a target gene. The ß-galactosidase (bgaB gene) basal levels expressed from Pgrac01-bgaB could be repressed at least twice in the E. coli cloning strain. Second, the inducer-free production of BgaB from four different plasmids with the Pgrac01 promoter in B. subtilis was investigated. As expected, BgaB expression levels of inducer-free constructs are at least 37 times higher than that of the inducible constructs in the absence of IPTG, and comparable to those in the presence of the inducer. Third, using efficient IPTG-inducible expression vectors containing the strong promoter Pgrac100, we could convert them into inducer-free expression plasmids. The BgaB production levels from the inducer-free plasmid in the absence of the inducer were at least 4.5 times higher than that of the inducible vector using the same promoter. Finally, we used gfp as a reporter gene in combination with the two promoters Pgrac01 and Pgrac100 to test the new vector types. The GFP expression levels could be repressed at least 1.5 times for the Pgrac01-gfp+ inducer-free construct in E. coli. The inducer-free constructs Pgrac01-gfp+ and Pgrac100-gfp+ allowed GFP expression at high levels from 23 × 104 to 32 × 104 RFU units and 9-13% of total intracellular proteins. We could reconfirm the two major advantages of the new inducer-free expression plasmids: (1) Strong repression of the target gene expression in the E. coli cloning strain, and (2) production of the target protein at high levels in B. subtilis in the absence of the inducer. CONCLUSIONS: We propose a general strategy to generate inducer-free expression vector by using IPTG-inducible vectors, and more specifically we developed inducer-free expression plasmids using IPTG-inducible promoters in the absence of the LacI repressor. These plasmids could be an excellent choice for high-level production of recombinant proteins in B. subtilis without the addition of inducer and at the same time maintaining a low basal level of the recombinant proteins in E. coli. The repression of the recombinant gene expression would facilitate cloning of genes that potentially inhibit the growth of E. coli cloning strains. The inducer-free expression plasmids will be extended versions of the current available IPTG-inducible expression vectors for B. subtilis, in which all these vectors use the same cognate promoters. These inducer-free and previously developed IPTG-inducible expression plasmids will be a useful cassette to study gene expression at a small scale up to a larger scale up for the production of recombinant proteins.

Direct Medical Costs of Dengue Fever in Vietnam: A Retrospective Study in a Tertiary Hospital.

BACKGROUND: In Vietnam, dengue fever is a major health concern, yet comprehensive information on its economic costs is lacking. The present study investigated treatment costs associated with dengue fever from the perspective of health care provision. METHODS: This retrospective study was conducted between January 2013 and December 2015 in Cu Chi General Hospital. The following dengue-related treatment costs were calculated: hospitalisation, diagnosis, specialised services, drug usage and medical supplies. Average cost per case and treatment cost across different age was calculated. RESULTS: In the study period, 1672 patients with dengue fever were hospitalised. The average age was 24.98 (SD = 14.10) years, and 47.5% were males (795 patients). Across age groups, the average cost per episode was USD 48.10 (SD = 3.22). The highest costs (USD 56.61, SD = 48.84) were incurred in the adult age group (> 15 years), and the lowest costs (USD 30.10, SD = 17.27) were incurred in the paediatric age group (< 15 years). CONCLUSION: The direct medical costs of dengue-related hospitalisation place a severe economic burden on patients and their families. The probable economic value of dengue management in Vietnam is significant.

Monitoring Conformational Changes in the Receptor Tyrosine Kinase EGFR.

The receptor tyrosine kinase EGFR is regulated by complex conformational changes, and this conformational control is disturbed in certain types of cancer. Many ligands are known to bind EGFR in its active conformation, thereby preventing ATP from binding. Only a few ligands are known to stabilize EGFR in its inactive conformation, thus providing novel strategies for perturbing EGFR activity. We report a direct binding assay that enables the identification of novel ligands that bind to and stabilize the inactive conformation of EGFR.

Structure of the Mycobacterium tuberculosis type VII secretion system chaperone EspG5 in complex with PE25-PPE41 dimer.

The growth or virulence of Mycobacterium tuberculosis bacilli depends on homologous type VII secretion systems, ESX-1, ESX-3 and ESX-5, which export a number of protein effectors across membranes to the bacterial surface and environment. PE and PPE proteins represent two large families of highly polymorphic proteins that are secreted by these ESX systems. Recently, it was shown that these proteins require system-specific cytoplasmic chaperones for secretion. Here, we report the crystal structure of M. tuberculosis ESX-5-secreted PE25-PPE41 heterodimer in complex with the cytoplasmic chaperone EspG(5). EspG(5) represents a novel fold that is unrelated to previously characterized secretion chaperones. Functional analysis of the EspG(5) -binding region uncovered a hydrophobic patch on PPE41 that promotes dimer aggregation, and the chaperone effectively abolishes this process. We show that PPE41 contains a characteristic chaperone-binding sequence, the hh motif, which is highly conserved among ESX-1-, ESX-3- and ESX-5-specific PPE proteins. Disrupting the interaction between EspG(5) and three different PPE target proteins by introducing different point mutations generally affected protein secretion. We further demonstrate that the EspG(5) chaperone plays an important role in the ESX secretion mechanism by keeping aggregation-prone PE-PPE proteins in their soluble state.

Stacking and Colloidal Stability of CdSe Nanoplatelets.

Colloidal CdSe nanoplatelets with monolayer control over their thickness can now be synthesized in solution and display interesting optical properties. From a fundamental point of view, the self-assembly of CdSe nanoplatelets can impact their optical properties through short-range interactions, and achieving control over their dispersion state in solution is of major relevance. The related issue of colloidal stability is important from an applicative standpoint in the perspective of the processing of these materials. Using UV-vis spectroscopy, we assess the colloidal stability of dispersions of CdSe nanoplatelets at different nanoparticle and ligand (oleic acid) concentrations. We unravel an optimum in oleic acid concentration for colloidal stability and show that even moderately concentrated dispersions flocculate on a time scale ranging from minutes to hours. Small-angle X-ray scattering shows that the precipitation proceeds through a face-to-face stacking of the nanoplatelets due to long-ranged van der Waals attraction. To address this issue, we coated the platelets with a carboxylic acid-terminated polystyrene, thus achieving colloidal stability while retaining the optical properties of the platelets.

Development of Pgrac100-based expression vectors allowing high protein production levels in Bacillus subtilis and relatively low basal expression in Escherichia coli.

BACKGROUND: In general, fusion of recombinant genes to strong inducible promoters allowing intracellular expression in Bacillus subtilis is a two-step process. The ligation products are transformed into Escherichia coli, followed by identification of the correct plasmid, and this plasmid is subsequently transformed into B. subtilis. This raises the problem that basal level of expression of the recombinant gene could be harmful for E. coli cells. Based on the Pgrac promoter, we optimized the UP element, the -35, 15, -10 and the +1 region to enhance the promoter activity in B. subtilis after induction. However, detailed investigations for a promoter to develop expression vectors that allows high protein production levels in B. subtilis and a relatively low basal expression levels in E. coli has not been studied yet. RESULTS: We screened the previously constructed library of E. coli - B. subtilis shuttle vectors for high level expression in B. subtilis and low basal level in E. coli. Promoter Pgrac100 turned out to meet these criteria, in which ß-galactosidase expression level of Pgrac100-bgaB is about 9.2 times higher than Pgrac01-bgaB in B. subtilis and the ratio of those in induced B. subtilis over un-induced E. coli from Pgrac100-bgaB is 1.3 times higher than Pgrac01-bgaB. Similarly, GFP expression level of Pgrac100-gfp is about 27 times higher than that of Pgrac01-gfp and the ratio from Pgrac100-gfp is 35.5 times higher than Pgrac01-gfp. This promoter was used as a basis for the construction of three novel vectors, pHT253 (His-tag-MCS), pHT254 (MCS-His-tag) and pHT255 (MCS-Strep-tag). Expression of the reporter proteins BgaB and GFP using these expression vectors in B. subtilis at a low IPTG concentration were measured and the fusion proteins could be purified easily in a single step by using Strep-Tactin or IMAC-Ni columns. CONCLUSIONS: This paper describes the construction and analysis of an IPTG-inducible expression vector termed Pgrac100 for the high level production of intracellular recombinant proteins in B. subtilis and a relatively low basal expression level in E. coli. Based on this vector, the derivative vectors, Pgrac100-His-tag-MCS, Pgrac100-MCS-His-tag and Pgrac100-MCS-Strep-tag have been constructed.

Up to 100% Improvement in Dynamic Nuclear Polarization Solid-State NMR Sensitivity Enhancement of Polymers by Removing Oxygen.

High-field dynamic nuclear polarization (DNP) has emerged as a powerful technique for improving the sensitivity of solid-state NMR (SSNMR), yielding significant sensitivity enhancements for a variety of samples, including polymers. Overall, depending upon the type of polymer, the molecular weight, and the DNP sample preparation method, sensitivity enhancements between 5 and 40 have been reported. These promising enhancements remain, however, far from the theoretical maximum (>1000). Crucial to the success of DNP SSNMR is the DNP signal enhancement (εDNP ), which is the ratio of the NMR signal intensities with and without DNP. It is shown here that, for polymers exhibiting high affinity toward molecular oxygen (e.g., polystyrene), removing part of the absorbed (paramagnetic) oxygen from the solid-state samples available as powders (instead of dissolved or dispersed in a solvent) increases proton nuclear relaxation times and εDNP, hereby providing up to a two-fold sensitivity increase (i.e., a four-fold reduction in experimental time).

Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries.

Electrochemical energy storage is one of the main societal challenges of this century. The performances of classical lithium-ion technology based on liquid electrolytes have made great advances in the past two decades, but the intrinsic instability of liquid electrolytes results in safety issues. Solid polymer electrolytes would be a perfect solution to those safety issues, miniaturization and enhancement of energy density. However, as in liquids, the fraction of charge carried by lithium ions is small (<20%), limiting the power performances. Solid polymer electrolytes operate at 80 °C, resulting in poor mechanical properties and a limited electrochemical stability window. Here we describe a multifunctional single-ion polymer electrolyte based on polyanionic block copolymers comprising polystyrene segments. It overcomes most of the above limitations, with a lithium-ion transport number close to unity, excellent mechanical properties and an electrochemical stability window spanning 5 V versus Li(+)/Li. A prototype battery using this polyelectrolyte outperforms a conventional battery based on a polymer electrolyte.