Electrochemical detection of fluoroquinolone antibiotics in milk using a magneto immunosensor.

An amperometric magneto-immunosensor (AMIS) for the detection of residues of fluoroquinolone antibiotics in milk samples is described for the first time. The immunosensor presented combines magnetic beads biomodified with an antibody with a broad recognition profile of fluoroquinolones, a haptenized enzyme and a magnetic graphite-epoxy composite (m-GEC) electrode. After the immunochemical reaction with specific enzyme tracer, the antibody biomodified magnetic beads are easily captured by an electrode made of graphite-epoxy composite containing a magnet, which also acts as transducer for the electrochemical detection. In spite of the complexity of milk, the use of magnetic beads allows elimination of potential interferences caused by the matrix components; hence the AMIS could perform quantitative measurements, directly in these samples, without any additional sample cleanup or extraction step. The immunosensor is able to detect up to seven different fluoroquinolones far below the MRLs defined by the UE for milk; for example ciprofloxacin is detected directly in milk with an IC50 of 0.74 µg/L and a LOD of 0.009 µg/L. This strategy offers great promise for rapid, simple, cost-effective, and on-site analysis fluoroquinolones in complex samples.

Molecular modeling assisted hapten design to produce broad selectivity antibodies for fluoroquinolone antibiotics.

Antibodies with a wide recognition profile of fluoroquinolone antibiotics have been produced based on chemical criteria, theoretical studies, and molecular modeling assisted hapten design. The immunizing hapten preserves the most important and characteristic epitopes of this antibiotic family. The studies have taken into consideration the zwitterionic character of most of the fluoroquinolones and the relative concentration of the different species in equilibrium at physiologic pH. The hapten is prepared in the form of a stable prehapten through a 5 step synthetic pathway. Immediately before conjugation, the immunizing hapten is obtained by removing the diphenylmethane protecting group. The specificity of the antibodies obtained is directed toward the common area defined by the fluorine atom at position 6 and the ß-ketoacid moiety. The ELISA developed is able to recognize with very good detectability important fluoroquinolones used in the veterinary field such as ciprofloxacin (CPFX, IC(50), 0.35 µg L(-1)), enrofloxacin (ERFX, IC(50), 0.65 µg L(-1)), danofloxacin (DNFX, IC(50), 7.31 µg L(-1)), difloxacin (DFX, IC(50), 0.91 µg L(-1)), sarafloxacin (SRFX, IC(50), 0.96 µg L(-1)), norfloxacin (NRFX, IC(50), 0.78 µg L(-1)), ofloxacin (OFX, IC(50), 1.84 µg L(-1)), flumequine (Flume, IC(50), 3.91 µ gL(-1)), marbofloxacin (MBFX, IC(50), 4.30 µ gL(-1)), and oxolinic acid (OXO, IC(50), 23.53 µg L(-1)). The results presented here demonstrate that the antibody affinity is strongly affected by the presence of divalent cations, owing to their complexation with the fluoroquinolone molecules. Moreover, the outcome from the effect of the pH on the immunochemical assays suggests that the selectivity could be modulated with the pH due to the zwitterionic character of the fluoroquinolones and as a function of their different pK(a) values.

Impedimetric immunosensor based on a polypyrrole-antibiotic model film for the label-free picomolar detection of ciprofloxacin.

This paper describes the construction of an impedimetric immunosensor for the label-free detection of ciprofloxacin, an antibiotic belonging to synthetic fluoroquinolones. A poly(pyrrole-N-hydroxysuccinimide) film was electrogenerated onto electrodes and then used for the reagentless covalent binding of a fluoroquinolone model bearing an amino group. The resulting electrodes were utilized to immobilize a layer of anticiprofloxacin antibody onto the polymer surface by immunoreaction. In presence of ciprofloxacin, the antibody was displaced in solution inducing marked changes in the impedance of the sensor electrodes. These phenomena were detected and characterized by electrochemical impedance spectroscopy allowing the selective detection of extremely low ciprofloxacin concentration, namely, 1 x 10(-12) g mL(-1) or 3 pmol L(-1). Sensors exposed to ciprofloxacin showed a decrease in the sum of the interfacial resistances with the increase in ciprofloxacin concentration from 1 x 10(-12) to 1 x 10(-6) g mL(-1).

Optical Biosensors for Therapeutic Drug Monitoring.

Therapeutic drug monitoring (TDM) is a fundamental tool when administering drugs that have a limited dosage or high toxicity, which could endanger the lives of patients. To carry out this monitoring, one can use different biological fluids, including blood, plasma, serum, and urine, among others. The help of specialized methodologies for TDM will allow for the pharmacodynamic and pharmacokinetic analysis of drugs and help adjust the dose before or during their administration. Techniques that are more versatile and label free for the rapid quantification of drugs employ biosensors, devices that consist of one element for biological recognition coupled to a signal transducer. Among biosensors are those of the optical biosensor type, which have been used for the quantification of different molecules of clinical interest, such as antibiotics, anticonvulsants, anti-cancer drugs, and heart failure. This review presents an overview of TDM at the global level considering various aspects and clinical applications. In addition, we review the contributions of optical biosensors to TDM.

A multianalyte ELISA for immunochemical screening of sulfonamide, fluoroquinolone and ss-lactam antibiotics in milk samples using class-selective bioreceptors.

A multianalyte ELISA has been developed for the simultaneous determination of the most frequently used antibiotic families in the veterinary field following the typical planar microarray configuration, where the identity of the target analyte is encoded by its location in the detection platform (Master et al. in Drug Discovery Today 11:1007-1011, 2006). To accomplish this aim, two individual enzyme-linked immunosorbent assays for sulfonamide and fluoroquinolone antibiotics and an enzyme-linked receptor assay for ss-lactam antibiotics have been combined. The strategy uses microplates coated with the corresponding haptenized proteins in specific sections of the microplate. The samples are mixed with a cocktail containing the bioreagents, and distributed in the wells of the microplate. Identification of the antibiotic present in a particular sample is consequently accomplished by detecting a positive response on the corresponding microplate section. Since the bioreceptors used show a wide recognition of the congeners of each antibiotic family, the multianalyte method is able to detect more than 25 different antibiotics from the three most important antibiotic families. The detectability reached in full-fat milk samples is below the European maximum residue limits. The accuracy and reliability of this multiplexed bioanalytical method have been demonstrated by analyzing blind spiked samples.

Impedimetric immunosensor for the specific label free detection of ciprofloxacin antibiotic.

Impedance spectroscopy approaches combined with the immunosensor technology have been used for the determination of trace amounts of ciprofloxacin antibiotic belonging to the fluoroquinolone family. The sensor electrode was based on the immobilization of anti-ciprofloxacin antibodies by chemical binding onto a poly(pyrrole-NHS) film electrogenerated on a solid gold substrate. The electrode surface was modified by electropolymerization of pyrrole-NHS, antibody grafting and ciprofloxacin immunoreaction. The sensitive steps of surface modification, cyclic voltammetry (CV) and atomic force microscopy (AFM) imaging have been used for electrode surface characterization. The immunoreaction of ciprofloxacin on the grafted anti-ciprofloxacin antibody directly triggers a signal via impedance spectroscopy measurements which allows the detection of extremely low concentration of 10 pg/ml ciprofloxacin.

Immunochemical determination of fluoroquinolone antibiotics in cattle hair: a strategy to ensure food safety.

Enrofloxacin (ERFX) is a synthetic antibiotic of the fluoroquinolone (FQ) family, which is commonly administered in veterinary medicine. ERFX and its metabolite, ciprofloxacin (CPFX), have been reported to accumulate in hair of treated animals. Therefore, hair analysis is an attractive non-invasive alternative to control misuse of such antibiotic and to ensure food safety by preventing such food derived products arrive to the consumer. In this context, an immunochemical analytical protocol has been established to detect ERFX and CPFX residues in cattle hair samples. Unpigmented and pigmented hair were collected from ERFX-treated and non-treated calves, and the aqueous NH4OH extracts were directly analyzed by ELISA, being possible to achieve limits of detection in the range of 10-30 µg kg(-1). A good concordance between HPLC and ELISA measurements was observed. The results demonstrate the potential of the immunochemical procedure reported here to rapidly screen and quantitate FQ residues in hair samples.

Integrated disposable electrochemical immunosensors for the simultaneous determination of sulfonamide and tetracycline antibiotics residues in milk.

The design, preparation and analytical performance of a novel integrated amperometric immunosensor based on the immobilization of selective capture antibodies on the surface of Protein G-modified screen-printed dual carbon electrodes (SPdCEs) for the multiplexed determination of sulfonamide and tetracycline antibiotics residues in milk is reported in this work. Protein G was covalently immobilized onto a 4-aminobenzoic acid (4-ABA) film grafted on the disposable electrode, and a direct competitive immunoassay using horseradish peroxidase (HRP)-labeled tracers was performed. The amperometric responses measured at -0.2 V vs. the silver pseudo-reference electrode of the SPdCE upon the addition of H2O2 in the presence of hydroquinone (HQ) as mediator were used to monitor the extent of the immunoreactions. The developed methodology showed very low limits of detection (in the low ppb level) for sulfonamide and tetracycline antibiotics tested in untreated milk samples, and a good selectivity against other antibiotic residues frequently detected in milk and dairy products. The usefulness of the dual immunosensor was demonstrated by analyzing spiked milk samples as well as a reference milk containing a certified oxytetracycline (OTC) content. Good recoveries were attained in an analysis time of 30 min.

Disposable and integrated amperometric immunosensor for direct determination of sulfonamide antibiotics in milk.

The preparation and performance of a disposable amperometric immunosensor, based on the use of a selective capture antibody and screen-printed carbon electrodes (SPCEs), for the specific detection and quantification of sulfonamide residues in milk is reported. The antibody was covalently immobilized onto a 4-aminobenzoic acid (4-ABA) film grafted on the disposable electrode, and a direct competitive immunoassay using a tracer with horseradish peroxidase (HRP) for the enzymatic labeling was performed. The amperometric response measured at -0.2 V vs the silver pseudo-reference electrode of the SPCE upon the addition of H(2)O(2) in the presence of hydroquinone (HQ) as mediator was used as transduction signal. The developed methodology showed very low limits of detection (in the low ppb level) for 6 sulfonamide antibiotics tested in untreated milk samples, and a good selectivity against other families of antibiotics residues frequently detected in milk and dairy products. These features, together with the short analysis time (30 min), the simplicity, and easy automation and miniaturization of the required instrumentation make the developed methodology a promising alternative in the development of devices for on-site analysis.

Portable surface plasmon resonance immunosensor for the detection of fluoroquinolone antibiotic residues in milk.

An inexpensive and portable surface plasmon resonance (SPR) sensor, SPReeta Evaluation Kit SPR3, has been used to develop a biosensor for the determination of fluoroquinolone antibiotics (FQs) and to demonstrate its performance analyzing FQ residues in milk samples. The SPReeta three-channel gold chips were activated with a mixed self-assembled monolayer (m-SAM) and functionalized with a FQ haptenized protein. Binding of the antibody produced a concentration-dependent increase of the SPR signal as a result of the change in the refraction index. Similarly, the presence of the FQ produced a dose-dependent decrease of the response, which allowed a good limit of detection (LOD) to be obtained (1.0 ± 0.4 µg L(-1) for enrofloxacin in buffer). The response was reproducible in all three channels, on different injections and days, and also between chips. Milk samples could be analyzed after a simple sample treatment involving fat removal by centrifugation and dilution with water. Under these conditions calibration curves were obtained showing that FQ residues can be analyzed in milk samples with an IC(50) value of 26.4 ± 7.2 µg L(-1) and a LOD of 2.0 ± 0.2 µg L(-1) (for enrofloxacin), far below the European Union regulations for this antibiotic family in this matrix. Finally, the paper also demonstrates that the biosensor is able to selectively detect the presence of FQs in milk samples, even in the presence of other antibiotics. Enrofloxacin, ciprofloxacin, and norfloxacin residues were detected in blind samples supplied by Nestlé Co.

Detection of fluoroquinolone antibiotics in milk via a labeless immunoassay based upon an alternating current impedance protocol.

This paper describes the construction of a labeless immunosensor for the antibiotic ciprofloxacin in milk and its interrogation using an ac impedance protocol. Commercial screen-printed carbon electrodes were used as the basis for the sensor. Polyaniline was electrodeposited onto the sensors and then utilized to immobilize a biotinylated antibody for ciprofloxacin using classical avidin-biotin interactions. Antibody loaded electrodes were exposed to solutions of antigen in milk and interrogated using an ac impedance protocol. The faradaic component of the impedance of the electrodes was found to increase with increasing concentration of antigen. Control samples containing a nonspecific IgG antibody were also studied but were found to display large nonspecific responses, probably due to the antibody binding some of the large number of components found in milk. Control sensors could, however, be fabricated using antibodies specific for species not found in milk. Calibration curves could be obtained by subtraction of the responses for specific and control antibody-based sensors, thereby eliminating the effects of nonspecific adsorption of antigen. Sensors exposed to ciprofloxacin in milk gave increases in impedance whereas ciprofloxacin in phosphate buffer led to decreases, indicating the possibility of developing sensors which can both detect and differentiate between free and chelated antigen.