Efficient [(NHC)Au(NTf2)]-catalyzed hydrohydrazidation of terminal and internal alkynes.

The efficient hydrohydrazidation of terminal (6a-r, 18 examples, 0.1-0.2 mol % [(NHC)Au(NTf2)], T = 60 °C) and internal alkynes (7a-j, 10 examples, 0.2-0.5 mol % [(NHC)Au(NTf2)], T = 60-80 °C) utilizing a complex with a sterically demanding bispentiptycenyl-substituted NHC ligand and the benign reaction solvent anisole, is reported.

The application of novel Ir-NHC polarization transfer complexes by SABRE.

In recent years, the hyperpolarization method Signal Amplification By Reversible Exchange (SABRE) has developed into a powerful technique to enhance Nuclear Magnetic Resonance (NMR) signals of organic substrates in solution (mostly via binding to the nitrogen lone pair of N-heterocyclic compounds) by several orders of magnitude. In order to establish the application and development of SABRE as a hyperpolarization method for medical imaging, the separation of the Ir-N-Heterocyclic Carbene (Ir-NHC) complex, which facilitates the hyperpolarization of the substrates in solution, is indispensable. Here, we report for the first time the use of novel Ir-NHC complexes with a polymer unit substitution in the backbone of N-Heterocyclic Carbenes (NHC) for SABRE hyperpolarization, which permits the removal of the complexes from solution after the hyperpolarization of a target substrate has been generated.

Malodorogenic Sensing of Carbon Monoxide.

A thin film of poly-([IrCl(cod)(NHC-onbe)]n -(propyl-onbe)m ) (onbe=oxanorbornene) coated on filter paper reacts quantitatively with CO to yield 1,5-cyclooctadiene, the unpleasant smell of which can be detected by the human olfactory system with very high sensitivity. Odorless, but toxic CO is thus "translated" into the distinct smell of 1,5-cyclooctadiene. Based on malodorogenic sensing it is possible to smell the presence of CO.

Fine-Tuning the Fluorescence Gain of FRET-Type (Bodipy)(Bodipy')-NHC-Iridium Complexes for CO Detection with a Large Virtual Stokes Shift.

Complexes of the general formula [IrCl(cod)(bdp-NHC-bdp')] and [IrCl(cod)(bdp-NHC)] (bdp=bodipy=4,4-difluoro-4-bora-3a,4a-diaza-s-indacene, cod=1,5-cyclooctadiene) were synthesized. The substitution reaction of cod with two molecules of CO converts weakly fluorescent into strongly fluorescent complexes [IrCl(CO)2 (bdp-NHC-bdp')] and [IrCl(CO)2 (bdp-NHC)]. Bdp and bdp" form a fluorescence resonance energy transfer (FRET) pair and the excitation of bdp leads to a strong emission from bdp" with a virtual Stokes shift of 98 nm. The fluorescence gain (IFl [Ir(CO)2 ]]/IFl [Ir(cod)]=1.7) upon reaction with CO in this complex is modest. To increase the fluorescence gain, the quenching capacity of the transition metal was improved by increasing the electron density at iridium. This was achieved by substituting the metal-bound chloride with an electron-rich thiolate RC6 H4 S. Depending on the nature of the R substituent in [Ir(SC6 H4 R)(cod)(bdp-NHC-bdp')], an improved fluorescence gain in the cod/CO substitution reaction of up to 4.3 was observed and up to 26 (from gain=5) in [Ir(SC6 H4 R)(cod)(bdp-NHC)]. DFT calculations on closely related [Ir(SC6 H4 R)(cod)(bdp-NHC)] complexes indicate that a photoinduced electron transfer mechanism is the dominant quenching pathway for the iridium thiolates with R=COMe, CF3 , Cl, H, Me, tBu, OMe, NEt2 . The CO-responsive FRET complex was immobilized on paper, displaying a red fluorescent color upon exposure to CO.

Observing Initial Steps in Gold-Catalyzed Alkyne Transformations by Utilizing Bodipy-Tagged Phosphine-Gold Complexes.

The Pd-catalyzed reactions of 3-chloro-bodipy with R2 PH (R=Ph, Cy) provide nonfluorescent bodipy-phosphines 3-PR2 -bodipy 3 a (R=Ph) and 3 b (R=Cy; quantum yield Φ<0.001). Metal complexes such as [AgCl(3 b)] and [AuCl(3 b)] were prepared and shown to display much higher fluorescence (Φ=0.073 and 0.096). In the gold complexes, the level of fluorescence was found to be qualitatively correlated with the electron density at gold. Consequently, the fluorescence brightness of [AuCl(3 b)] increases when the chloro ligand is replaced by a weakly coordinating anion, whereas upon formation of the electron-rich complex [Au(SR)(3 b)] the fluorescence is almost quenched. Related reactions of [AuCl(3 b)] with [Ag]ONf)] (Nf= nonaflate) and phenyl acetylenes enable the tracking of initial steps in gold-catalyzed reactions by using fluorescence spectroscopy. Treatment of [AuCl(3 b)] with [Ag(ONf)] gave the respective [Au(ONf)(3 b)] only when employing more than 2.5 equivalents of silver salt. The reaction of the "cationic" gold complex with phenyl acetylenes leads to the formation of the respective dinuclear cationic [{(3 b)Au}2 (CCPh)](+) and an increase in the level of fluorescence. The rate of the reaction of [Au(ONf)(3 b)] with PhCCH depends on the amount of silver salt in the reaction mixture; a large excess of silver salt accelerates this transformation. In situ fluorescence spectroscopy thus provides valuable information on the association of gold complexes with acetylenes.

Triptycene-Based Chiral and meso-N-Heterocyclic Carbene Ligands and Metal Complexes.

Based on 1-amino-4-hydroxy-triptycene, new saturated and unsaturated triptycene-NHC (N-heterocyclic carbene) ligands were synthesized from glyoxal-derived diimines. The respective carbenes were converted into metal complexes [(NHC)MX] (M=Cu, Ag, Au; X=Cl, Br) and [(NHC)MCl(cod)] (M=Rh, Ir; cod=1,5-cyclooctadiene) in good yields. The new azolium salts and metal complexes suffer from limited solubility in common organic solvents. Consequently, the introduction of solubilizing groups (such as 2-ethylhexyl or 1-hexyl by O-alkylation) is essential to render the complexes soluble. The triptycene unit infers special steric properties onto the metal complexes that enable the steric shielding of selected areas close to the metal center. Next, chiral and meso-triptycene based N-heterocyclic carbene ligands were prepared. The key step in the synthesis of the chiral ligand is the Buchwald-Hartwig amination of 1-bromo-4-butoxy-triptycene with (1S,2S)-1,2-diphenyl-1,2-diaminoethane, followed by cyclization to the azolinium salt with HC(OEt)3 . The analogous reaction with meso-1,2-diphenyl-1,2-diaminoethane provides the respective meso-azolinium salt. Both the chiral and meso-azolinium salts were converted into metal complexes including [(NHC)AuCl], [(NHC)RhCl(cod)], [(NHC)IrCl(cod)], and [(NHC)PdCl(allyl)]. An in situ prepared chiral copper complex was tested in the enantioselective borylation of α,ß-unsaturated esters and found to give an excellent enantiomeric ratio (er close to 90:10).

Systematic Modulation of the Fluorescence Brightness in Boron-Dipyrromethene (BODIPY)-Tagged N-Heterocyclic Carbene (NHC)-Gold-Thiolates.

Five different highly fluorescent boron-dipyrromethene (BODIPY)-tagged N-heterocyclic carbene NHC-gold halide complexes were synthesized. The substitution of the halogeno ligand by 4-substituted aryl thiolates leads to a decrease in the brightness of the complexes. This decrease depends on the electronic nature of the thiols, being most pronounced with highly electron-rich thiols (4-R=NMe2 ). The brightness of the gold thiolates also depends on the distance between the sulfur atom and the BODIPY moiety. The systematic variation of the electron density of [(NHC-bodipy)Au(SC6 H4 R)] (via different R groups) enables the systematic variation of the fluorescence brightness of an appended BODIPY fluorophore. Based on this and supported by DFT calculations, a photoinduced electron-transfer quenching appears to be the dominant mechanism controlling the brightness of the appended BODIPY dye.

Metal complexes of a boron-dipyrromethene (BODIPY)-tagged N-heterocyclic carbene (NHC) as luminescent carbon monoxide chemodosimeters.

Several metal complexes with a boron dipyrromethene (BODIPY)-functionalized N-heterocyclic carbene (NHC) ligand 4 were synthesized. The fluorescence in [(4)(SIMes)RuCl2(ind)] complex is quenched (Φ = 0.003), it is weak in [(4)PdI2(Clpy)] (Φ = 0.033), and strong in [(4)AuI] (Φ = 0.70). The BODIPY-tagged complexes can experience pronounced changes in the brightness of the fluorophore upon ligand-exchange and ligand-dissociation reactions. Complexes [(4)MX(1,5-cyclooctadiene)] (M = Rh, Ir; X = Cl, I; Φ = 0.008-0.016) are converted into strongly fluorescent complexes [(4)MX(CO)2] (Φ = 0.53-0.70) upon reaction with carbon monoxide. The unquenching of the Rh and Ir complexes appears to be a consequence of the decreased electron density at Rh or Ir in the carbonyl complexes. In contrast, the substitution of an iodo ligand in [(4)AuI] by an electron-rich thiolate decreases the brightness of the BODIPY fluorophore, rendering the BODIPY as a highly sensitive probe for changes in the coordination sphere of the transition metal.

A Fluorescent Molecular Probe for the Detection of Hydrogen Based on Oxidative Addition Reactions with Crabtree-Type Hydrogenation Catalysts.

A Crabtree-type Ir(I) complex tagged with a fluorescent dye (bodipy) was synthesized. The oxidative addition of H2 converts the weakly fluorescent Ir(I) complex (Φ=0.038) into a highly fluorescent Ir(III) species (Φ=0.51). This fluorogenic reaction can be utilized for the detection of H2 and to probe the oxidative addition step in the catalytic hydrogenation of olefins.

Ring-closing metathesis reactions: interpretation of conversion-time data.

Conversion-time data were recorded for various ring-closing metathesis (RCM) reactions that lead to five- or six-membered cyclic olefins by using different precatalysts of the Hoveyda type. Slowly activated precatalysts were found to produce more RCM product than rapidly activated complexes, but this comes at the price of slower product formation. A kinetic model for the analysis of the conversion-time data was derived, which is based on the conversion of the precatalyst (Pcat) into the active species (Acat), with the rate constant k(act), followed by two parallel reactions: 1) the catalytic reaction, which utilizes Acat to convert reactants into products, with the rate k(cat), and 2) the conversion of Acat into the inactive species (Dcat), with the rate k(dec). The calculations employ two experimental parameters: the concentration of the substrate (c(S)) at a given time and the rate of substrate conversion (-dc(S)/dt). This provides a direct measure of the concentration of Acat and enables the calculation of the pseudo-first-order rate constants k(act), k(cat), and k(dec) and of k(S) (for the RCM conversion of the respective substrate by Acat). Most of the RCM reactions studied with different precatalysts are characterized by fast k(cat) rates and by the k(dec) value being greater than the k(act) value, which leads to quasistationarity for Acat. The active species formed during the activation step was shown to be the same, regardless of the nature of different Pcats. The decomposition of Acat occurs along two parallel pathways, a unimolecular (or pseudo-first-order) reaction and a bimolecular reaction involving two ruthenium complexes. Electron-deficient precatalysts display higher rates of catalyst deactivation than their electron-rich relatives. Slowly initiating Pcats act as a reservoir, by generating small stationary concentrations of Acat. Based on this, it can be understood why the use of different precatalysts results in different substrate conversions in olefin metathesis reactions.

Oxidation-triggered ring-opening metathesis polymerization.

Eight new N-Hoveyda-type complexes were synthesized in yields of 67-92 % through reaction of [RuCl2 (NHC)(Ind)(py)] (NHC=1,3-bis(2,4,6-trimethylphenylimidazolin)-2-ylidene (SIMes) or 1,3-bis(2,6-diisopropylphenylimidazolin)-2-ylidene (SIPr), Ind=3-phenylindenylid-1-ene, py=pyridine) with various 1- or 1,2-substituted ferrocene compounds with vinyl and amine or imine substituents. The redox potentials of the respective complexes were determined; in all complexes an iron-centered oxidation reaction occurs at potentials close to E=+0.5 V. The crystal structures of the reduced and of the respective oxidized Hoveyda-type complexes were determined and show that the oxidation of the ferrocene unit has little effect on the ruthenium environment. Two of the eight new complexes were found to be switchable catalysts, in that the reduced form is inactive in the ring-opening metathesis polymerization of cis-cyclooctene (COE), whereas the oxidized complexes produce polyCOE. The other complexes are not switchable catalysts and are either inactive or active in both reduced and oxidized states.

The influence of electronic modifications on rotational barriers of bis-NHC-complexes as observed by dynamic NMR spectroscopy.

There has been much debate about the σ-donor and π-acceptor properties of N-heterocyclic carbenes (NHCs). While a lot of synthetic modifications have been performed with the goal of optimizing properties of the catalyst to tune reactivity in various transformations (e.g. metathesis), direct methods to characterize σ-donor and π-acceptor properties are still few. We believe that dynamic NMR spectroscopy can improve understanding of this aspect. Thus, we investigated the intramolecular dynamics of metathesis precatalysts bearing two NHCs. We chose four systems with one identical NHC ligand (N,N'-Bis(2,4,6-trimethylphenyl)-imidazolinylidene (SIMes) in all four cases) and NHC(ewg) ligands bearing four different electron-withdrawing groups (ewg). Both rotational barriers of the respective Ru-NHC-bonds change significantly when the electron density of one of the NHCs (NHC(ewg)) is modified. Although it is certainly not possible to fully dissect σ-donor and π-acceptor portions of the bonding situations in the respective Ru-NHC-bond via dynamic NMR spectroscopy, our studies nevertheless show that the analysis of the rotation around the Ru-SIMes-bond can be used as a spectroscopic parameter complementary to cyclic voltammetry. Surprisingly, we observed that the rotation around the Ru-NHC(ewg)-bond shows the same trend as the initiation rate of a ring-closing metathesis of the four investigated bis-NHC-complexes.

Fluorescent organometallic dyads and triads: establishing spatial relationships.

FRET pairs involving up to three different Bodipy dyes are utilized to provide information on the assembly/disassembly of organometallic complexes. Azolium salts tagged with chemically robust and photostable blue or green or red fluorescent Bodipy, respectively, were synthesized and the azolium salts used to prepare metal complexes [(NHC_blue)ML], [(NHC_green)ML] and [(NHC_red)ML] (ML = Pd(allyl)Cl, IrCl(cod), RhCl(cod), AuCl, Au(NTf2), CuBr). The blue and the green Bodipy and the green and the red Bodipy, respectively, were designed to allow the formation of efficient FRET pairs with minimal cross-talk. Organometallic dyads formed from two subunits enable the transfer of excitation energy from the donor dye to the acceptor dye. The blue, green and red emission provide three information channels on the formation of complexes, which is demonstrated for alkyne or sulfur bridged digold species and for ion pairing of a red fluorescent cation and a green fluorescent anion. This approach is extended to probe an assembly of three different subunits. In such a triad, each component is tagged with either a blue, a green or a red Bodipy and the energy transfer blue →green → red proves the formation of the triad. The tagging of molecular components with robust fluorophores can be a general strategy in (organometallic) chemistry to establish connectivities for binuclear catalyst resting states and binuclear catalyst decomposition products in homogeneous catalysis.

On the mechanism of the initiation reaction in Grubbs-Hoveyda complexes.

Grubbs-Hoveyda-type complexes with variable 4-R (complexes 1: 4-R = NEt(2), OiPr, H, F, NO(2)) and 5-R substituents (complexes 2: 5-R = NEt(2), OiPr, Me, F, NO(2)) at the 2-isopropoxy benzylidene ether ligand and with variable 4-R substituents (complexes 3: 4-R = H, NO(2)) at the 2-methoxy benzylidene ether ligand were synthesized and the respective Ru(II/III) redox potentials (ranging from ΔE = +0.46 to +1.04 V), and UV-vis spectra recorded. The initiation kinetics of complexes 1-3 with the olefins diethyl diallyl malonate (DEDAM), butyl vinyl ether (BuVE), 1-hexene, styrene, and 3,3-dimethylbut-1-ene were investigated using UV-vis spectroscopy. Electron-withdrawing groups at the benzylidene ether ligands were found to increase the initiation rates, while electron-donating groups lead to slower precatalyst activation; accordingly with DEDAM, the complex 1(NO(2)) initiates almost 100 times faster than 1(NEt(2)). The 4-R substituents (para to the benzylidene carbon) were found to have a stronger influence on physical and kinetic properties of complexes 1 and 2 than that of 5-R groups para to the ether oxygen. The DEDAM-induced initiation reactions of complexes 1 and 2 are classified as two-step reactions with an element of reversibility. The hyperbolic fit of the k(obs) vs [DEDAM] plots is interpreted according to a dissociative mechanism (D). Kinetic studies employing BuVE showed that the initiation reactions simultaneously follow two different mechanistic pathways, since the k(obs) vs [olefin] plots are best fitted to k(obs) = k(D)·k(4)/k(-D)·[olefin]/(1 + k(4)/k(-D)·[olefin]) + k(I)·[olefin]. The k(I)·[olefin] term dominates the initiation behavior of the sterically less demanding complexes 3 and was shown to correspond to an interchange mechanism with associative mode of activation (I(a)), leading to very fast precatalyst activation at high olefin concentrations. Equilibrium and rate constants for the reactions of complexes 1-3 with the bulky PCy(3) were determined. In general, sterically demanding olefins (DEDAM, styrene) and Grubbs-Hoveyda type complexes 1 and 2 preferentially initiate according to the dissociative pathway; for the less bulky olefins (BuVE, 1-hexene) and complexes 1 and 2 both D and I(a) are important. Activation parameters for BuVE reactions and complexes 1(NEt(2)), 1(H), and 1(NO(2)) were determined, and ΔS(‡) was found to be negative (ΔS(‡) = -113 to -167 J·K(-1)·mol(-1)) providing additional support for the I(a) catalyst activation.

Fast olefin metathesis at low catalyst loading.

Reactions of the Grubbs 3rd generation complexes [RuCl(2)(NHC)(Ind)(Py)] (N-heterocyclic carbene (NHC)=1,3-bis(2,4,6-trimethylphenylimidazolin)-2-ylidene (SIMes), 1,3-bis(2,6-diisopropylphenylimidazolin)-2-ylidene (SIPr), or 1,3-bis(2,6-diisopropylphenylimidazol)-2-ylidene (IPr); Ind=3-phenylindenylid-1-ene, Py=pyridine) with 2-ethenyl-N-alkylaniline (alkyl=Me, Et) result in the formation of the new N-Grubbs-Hoveyda-type complexes 5 (NHC=SIMes, alkyl=Me), 6 (SIMes, Et), 7 (IPr, Me), 8 (SIPr, Me), and 9 (SIPr, Et) with N-chelating benzylidene ligands in yields of 50-75 %. Compared to their respective, conventional, O-Grubbs-Hoveyda complexes, the new complexes are characterized by fast catalyst activation, which translates into fast and efficient ring-closing metathesis (RCM) reactivity. Catalyst loadings of 15-150 ppm (0.0015-0.015 mol %) are sufficient for the conversion of a wide range of diolefinic substrates into the respective RCM products after 15 min at 50 °C in toluene; compounds 8 and 9 are the most catalytically active complexes. The use of complex 8 in RCM reactions enables the formation of N-protected 2,5-dihydropyrroles with turnover numbers (TONs) of up to 58,000 and turnover frequencies (TOFs) of up to 232,000 h(-1); the use of the N-protected 1,2,3,6-tetrahydropyridines proceeds with TONs of up to 37,000 and TOFs of up to 147,000 h(-1); and the use of the N-protected 2,3,6,7-tetrahydroazepines proceeds with TONs of up to 19,000 and TOFs of up to 76,000 h(-1), with yields for these reactions ranging from 83-92 %.

A guide to Sonogashira cross-coupling reactions: the influence of substituents in aryl bromides, acetylenes, and phosphines.

The conversion-time data for 168 different Pd/Cu-catalyzed Sonogashira cross-coupling reactions of five arylacetylenes (phenylacetylene; 1-ethynyl-2-ethylbenzene; 1-ethynyl-2,4,6-R(3)-benzene (R = Me, Et, i-Pr)) and Me(3)SiCCH with seven aryl bromides (three 2-R-bromobenzenes (R = Me, Et, i-Pr); 2,6-Me(2)-bromobenzene and three 2,4,6-R(3)-bromobenzenes (R = Me, Et, i-Pr)) with four different phosphines (P-t-Bu(3), t-Bu(2)PCy, t-BuPCy(2), PCy(3)) were determined using quantitative gas chromatography. The stereoelectronic properties of the substituents in the aryl bromides, acetylenes, and phosphines were correlated with the performance in Sonogashira reactions. It was found that the nature of the most active Pd/PR(3) complex for a Sonogashira transformation is primarily determined by the steric bulk of the acetylene; ideal catalysts are: Pd/P-t-Bu(3) or Pd/t-Bu(2)PCy for sterically undemanding phenylacetylene, Pd/t-BuPCy(2) for 2- and 2,6-substituted arylacetylenes or Me(3)SiCCH and Pd/PCy(3) for extremely bulky acetylenes and aryl bromides. Electron-rich and sterically demanding aryl bromides with substituents in the 2- or the 2,6-position require larger amounts of catalyst than 4-substituted aryl bromides. The synthesis of tolanes with bulky groups at one of the two aryl rings is best done by placing the steric bulk at the arylacetylene, which is also the best place for electron-withdrawing substituents.

Switched fluorescence and photosensitization based on reversible ion-pairing.

The close ion-pair of Ir(bdpSO3)(cod)(IMes)] is an efficient photosensitizer, while the solvent-separated anion is highly fluorescent. Controlling ion association governs the path of the excitation energy which is channeled either to the S1 state (fluorescence) or via intersystem crossing into the T1 state (1O2 generation). Modulation of NHC donation affects the photosensitizing properties and only electron-rich NHC provide highly efficient photosensitizers.

Bi- and trimetallic complexes with macrocyclic xanthene-4,5-diNHC ligands.

Three different types of bimetallic NHC-metal complexes were synthesized, whose NHC units are attached at the 4,5-positions of xanthene. The NHC units are in close proximity and are designed such that each carbene coordinates one ML unit, while the chelation of one metal by two NHC is not possible. Several xanthene-((NHC)ML)2 complexes with ML = RhCl(cod), IrCl(cod), RhCl(CO)2, IrCl(CO)2, AuCl, AgCl, CuCl and Pd(allyl)Cl were synthesized and investigated.

Sterically demanding trialkylphosphines for palladium-catalyzed cross coupling reactions-alternatives to PtBu3.

The strong electron-donation and the steric bulk of trialkylphosphines renders them as very useful ligands for palladium-catalyzed cross coupling reactions. This critical review reports on the synthesis of two families of trialkylphosphines (diadamantylalkylphosphines, fluorenyldialkylphosphines) and the properties of the respective palladium complexes in various cross coupling reactions, which evolved as alternatives to the classical Pd/PtBu(3) system. In contrast to the latter phosphine the new classes of ligands are characterized by a highly flexible ligand design, which allows the fine tuning of catalytic properties to the specific needs of certain substrates and also enables the attachment of additional tags to impart certain useful properties onto the respective phosphines (179 references).

[(NHC)(NHC(ewg))RuCl(2)(CHPh)] complexes with modified NHC(ewg) ligands for efficient ring-closing metathesis leading to tetrasubstituted olefins.

Imidazolium salts (NHC(ewg)HCl) with electronically variable substituents in the 4,5-position (H,H or Cl,Cl or H,NO(2) or CN,CN) and sterically variable substituents in the 1,3-position (Me,Me or Et,Et or iPr,iPr or Me,iPr) were synthesized and converted into the respective [AgI(NHC)(ewg)] complexes. The reactions of [(NHC)RuCl(2)(CHPh)(py)(2)] with the [AgI(NHC(ewg))] complexes provide the respective [(NHC)(NHC(ewg))RuCl(2)(CHPh)] complexes in excellent yields. The catalytic activity of such complexes in ring-closing metathesis (RCM) reactions leading to tetrasubstituted olefins was studied. To obtain quantitative substrate conversion, catalyst loadings of 0.2-0.5 mol % at 80 degrees C in toluene are sufficient. The complex with the best catalytic activity in such RCM reactions and the fastest initiation rate has an NHC(ewg) group with 1,3-Me,iPr and 4,5-Cl,Cl substituents and can be synthesized in 95 % isolated yield from the ruthenium precursor. To learn which one of the two NHC ligands acts as the leaving group in olefin metathesis reactions two complexes, [(FL-NHC)(NHC(ewg))RuCl(2)(CHPh)] and [(FL-NHC(ewg))(NHC)RuCl(2)(CHPh)], with a dansyl fluorophore (FL)-tagged electron-rich NHC ligand (FL-NHC) and an electron-deficient NHC ligand (FL-NHC(ewg)) were prepared. The fluorescence of the dansyl fluorophore is quenched as long as it is in close vicinity to ruthenium, but increases strongly upon dissociation of the respective fluorophore-tagged ligand. In this manner, it was shown for ring-opening metathesis ploymerization (ROMP) reactions at room temperature that the NHC(ewg) ligand normally acts as the leaving group, whereas the other NHC ligand remains ligated to ruthenium.