High throughput selection of organic cathode materials.

Efficient and affordable batteries require the design of novel organic electrode materials to overcome the drawbacks of the traditionally used inorganic materials, and the computational screening of potential candidates is a very efficient way to identify prospective solutions and minimize experimental testing. Here we present a DFT high-throughput computational screening where 86 million molecules contained in the PUBCHEM database have been analyzed and classified according to their estimated electrochemical features. The 5445 top-performing candidates were identified, and among them, 2306 are expected to have a one-electron reduction potential higher than 4 V versus (Li/Li+ ). Analogously, one-electron energy densities higher than 800 Whkg-1 have been predicted for 626 molecules. Explicit calculations performed for certain materials show that at least 69 candidates with a two-electron energy density higher than 1300 Whkg-1 . Successful molecules were sorted into several families, some of them already commonly used electrode materials, and others still experimentally untested. Most of them are small systems containing conjugated CO, NN, or NC functional groups. Our selected molecules form a valuable starting point for experimentalists exploring new materials for organic electrodes.

Energy transfer between Si nanocrystals and protoporphyrin molecules as a function of distance, orientation and size.

The interaction between protoporphyrin molecules (donor) and Si nanocrystals (acceptor) up to 2.5 nm for varying distances and orientations is studied by DFT, semi-empirical and TDDFT methods. Simulations show an effect on electronic structure, indicative of electron charge transfer in parallel orientation and small distances and nonelectron energy transfer for different orientations and larger distances. An absorption-emission spectral overlap is observed. The calculations of coupling and energy transfer rates show a distance dependence typical of fluorescence resonance energy transfer (FRET) in the long range, while in the short and ultra-short range the distance dependence indicates electron transfer in addition to FRET. The Si NCs with the smallest size yield larger couplings than the larger nanocrystals. The PPIX/Si NC coupling was enhanced by adding a plasmon nanoparticle as a bridge in the donor-acceptor system. Results using Au nanoparticles show increased energy transfer rates up to 104 and lower distance dependence.

UItra-low friction and edge-pinning effect in large-lattice-mismatch van der Waals heterostructures.

Two-dimensional heterostructures are excellent platforms to realize twist-angle-independent ultra-low friction due to their weak interlayer van der Waals interactions and natural lattice mismatch. However, for finite-size interfaces, the effect of domain edges on the friction process remains unclear. Here we report the superlubricity phenomenon and the edge-pinning effect at MoS2/graphite and MoS2/hexagonal boron nitride van der Waals heterostructure interfaces. We found that the friction coefficients of these heterostructures are below 10-6. Molecular dynamics simulations corroborate the experiments, which highlights the contribution of edges and interface steps to friction forces. Our experiments and simulations provide more information on the sliding mechanism of finite low-dimensional structures, which is vital to understand the friction process of laminar solid lubricants.

A new protocol for the identification of singlet fission sensitizers through computational screening.

Although singlet fission presents deep advantages or the generation of solar energy, the list of efficient singlet fission sensitizers is still very short, encouraging the theoreticians to focus their efforts on selecting and designing new candidates. Here, it is presented a computational protocol for the efficient screening of databases to select those species matching the energy requirements for singlet fission. Hence, out of the initial 29,123 species, 254 molecules (0.87%) were found to match singlet fission energy conditions. The consideration of practical concerns such as availability or stability reduced the number to just 24 (0.08%), among which the aminoanthraquinone derivatives are found particularly promising. The proposed protocol correct the deficiencies of the preceding ones, reaching DFT accuracy and minimizing the risk of getting false negatives especially at the early stages of the screening. In addition, this protocol can be used in future high-throughput investigations using datasets composed of millions of species.

Viewpoint: Atomic-Scale Design Protocols toward Energy, Electronic, Catalysis, and Sensing Applications.

Nanostructured materials are essential building blocks for the fabrication of new devices for energy harvesting/storage, sensing, catalysis, magnetic, and optoelectronic applications. However, because of the increase of technological needs, it is essential to identify new functional materials and improve the properties of existing ones. The objective of this Viewpoint is to examine the state of the art of atomic-scale simulative and experimental protocols aimed to the design of novel functional nanostructured materials, and to present new perspectives in the relative fields. This is the result of the debates of Symposium I "Atomic-scale design protocols towards energy, electronic, catalysis, and sensing applications", which took place within the 2018 European Materials Research Society fall meeting.

2H→1T Phase Engineering of Layered Tantalum Disulfides in Electrocatalysis: Oxygen Reduction Reaction.

Tremendous attention is currently being paid to renewable sources of energy. Transition-metal dichalcogenides (TMDs) have been intensively studied for their promising catalytic activities in the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR). In this fundamental work, we explored the catalytic properties of TMD family members 2H TaS2 and 1T TaS2 . Our findings reveal that both polytypes exhibit poor HER performance, which is even more pronounced after electrochemical reduction/oxidation. Our experimental data show that 1T TaS2 has a lower overpotential at a current density of -10 mA cm-1 , despite theoretical DFT calculations that indicated that the more favorable free energy of hydrogen adsorption should make "perfect" 2H TaS2 a better HER catalyst. Thorough characterization showed that the higher conductivity of 1T TaS2 and a slightly higher surface oxidation of 2H TaS2 explains this discrepancy. Moreover, changes in the catalytic activity after electrochemical treatment are addressed here. For the ORR in an alkaline environment, the electrochemical treatment led to an improvement in catalytic properties. With onset potentials similar to that of Pt/C catalysts, TaS2 was found to be an efficient catalyst for the ORR, rather than for proton reduction, in contrast to the behavior of Group 6 layered TMDs.

Layering effects on low frequency modes in n-layered MX2 transition metal dichalcogenides.

n-Layered (n = 2, 3, 4) MX2 transition metal dichalcogenides (M = Mo, W; X = S, Se, Te) have been studied using DFT techniques. Long-range van der Waals forces have been modeled using the Grimme correction to capture interlayer interactions. We study the dynamic and electronic dependence of atomic displacement on the number of layers. We find that the displacement patterns mainly affected by a change in the layer number are low-frequency modes at Γ and A k-points; such modes are connected with the intrinsic tribological response. We disentangle electro-phonon coupling by combining orbital polarization, covalency and cophonicity analysis with phonon band calculations. We find that the frequency dependence on the number of layers and the atomic type has a non-trivial relation with the electronic charge distribution in the interlayer region. We show that the interlayer electronic density can be adjusted by appropriately tuning M-X cophonicity, acting as a knob to control vibrational frequencies, hence the intrinsic frictional response. The present results can be exploited to study the electro-phonon coupling effects in TMD-based materials beyond tribological applications.

Tailoring Nanoscale Friction in MX2 Transition Metal Dichalcogenides.

Lattice dynamics of MX2 transition metal dichalcogenides (M = Mo, W; X = S, Se, Te) have been studied with density functional theory techniques to control the macroscopic tribological behavior. Long-range van der Waals forces have been modeled with Grimme correction to capture the interlayer interactions. A new lattice dynamic metric, named cophonicity, is proposed and used in combination with electronic and geometric descriptors to relate the stability of the lattice distortions with the electro-structural features of the system. The cophonicity analysis shows that the distortion modes relevant to the microscopic friction can be controlled by tuning the relative M/X atomic contributions to the phonon density of states. Guidelines on how to engineer macroscopic friction at nanoscale are formulated, and finally applied to design a new Ti-doped MoS2 phase with enhanced tribologic properties.

Fluence scan: an unexplored property of a laser beam.

We present an extended theoretical background of so-called fluence scan (f-scan or F-scan) method, which is frequently being used for offline characterization of focused short-wavelength (EUV, soft X-ray, and hard X-ray) laser beams [J. Chalupský et al., Opt. Express 18, 27836 (2010)]. The method exploits ablative imprints in various solids to visualize iso-fluence beam contours at different fluence and/or clip levels. An f-scan curve (clip level as a function of the corresponding iso-fluence contour area) can be generated for a general non-Gaussian beam. As shown in this paper, fluence scan encompasses important information about energy distribution within the beam profile, which may play an essential role in laser-matter interaction research employing intense non-ideal beams. Here we for the first time discuss fundamental properties of the f-scan function and its inverse counterpart (if-scan). Furthermore, we extensively elucidate how it is related to the effective beam area, energy distribution, and to the so called Liu's dependence [J. M. Liu, Opt. Lett. 7, 196 (1982)]. A new method of the effective area evaluation based on weighted inverse f-scan fit is introduced and applied to real data obtained at the SCSS (SPring-8 Compact SASE Source) facility.

Twisting Dynamics of Large Lattice-Mismatch van der Waals Heterostructures.

van der Waals (vdW) homo/heterostructures are ideal systems for studying interfacial tribological properties such as structural superlubricity. Previous studies concentrated on the mechanism of translational motion in vdW interfaces. However, detailed mechanisms and general properties of the rotational motion are barely explored. Here, we combine experiments and simulations to reveal the twisting dynamics of the MoS2/graphite heterostructure. Unlike the translational friction falling into the superlubricity regime with no twist angle dependence, the dynamic rotational resistances highly depend on twist angles. Our results show that the periodic rotational resistance force originates from structural potential energy changes during the twisting. The structural potential energy of MoS2/graphite heterostructure increases monotonically from 0° to 30° twist angles, and the estimated relative energy barrier is (1.43 ± 0.36) × 10-3 J/m2. The formation of Moiré superstructures in the graphene layer is the key to controlling the structural potential energy of the MoS2/graphene heterostructure. Our results suggest that in twisting 2D heterostructures, even if the interface sliding friction is negligible, the evolving potential energy change results in a nonvanishing rotational resistance force. The structural change of the heterostructure can be an additional pathway for energy dissipation in the rotational motion, further enhancing the rotational friction force.

Design Guidelines for Two-Dimensional Transition Metal Dichalcogenide Alloys.

Two-dimensional (2D) materials and transition metal dichalcogenides (TMD) in particular are at the forefront of nanotechnology. To tailor their properties for engineering applications, alloying strategies-used successfully for bulk metals in the last century-need to be extended to this novel class of materials. Here we present a systematic analysis of the phase behavior of substitutional 2D alloys in the TMD family on both the metal and the chalcogenide site. The phase behavior is quantified in terms of a metastability metric and benchmarked against systematic computational screening of configurational energy landscapes from First-Principles. The resulting Pettifor maps can be used to identify broad trends across chemical spaces and as starting point for setting up rational search strategies in phase space, thus allowing for targeted computational analysis of properties on likely thermodynamically stable compounds. The results presented here also constitute a useful guideline for synthesis of binary metal 2D TMDs alloys via a range of synthesis techniques.

Friend or Foe? Revising the Role of Oxygen in the Tribological Performance of Solid Lubricant MoS2.

Molybdenum disulfide (MoS2) is a solid lubricant used in various forms, such as a dry lubricant by itself or as a component of a more complex coating. In both these forms, the effect of oxygen contamination on the sliding properties of the MoS2 coatings is traditionally considered detrimental, resulting in expensive technological processes to produce pure MoS2. Here, it is shown that the high oxygen content does not necessarily hinder the solid lubricant properties and may even result in a lower friction and wear when compared to pure MoS2. Mo-S-O coatings were fabricated by unbalanced magnetron sputtering and tribologically tested under vacuum conditions. Oxygen caused amorphization of the as-deposited coatings but did not prevent the triboactivated formation of an ultra-thin crystalline MoS2 tribolayer with the incorporated oxygen. Such an imperfect tribolayer was found to reduce the coefficient of friction to 0.02, a value lower than that of pure MoS2. Moreover, owing to the higher density and hardness of oxygen-containing films, the wear rate was also found to be lower. Molecular dynamics simulations performed using a newly developed Mo-S-O force field confirmed that such an imperfect tribolayer can mitigate friction in a manner comparable to that of MoS2.

Interface-Driven Strain in Heavy Ion-Irradiated Zr/Nb Nanoscale Metallic Multilayers: Validation of Distortion Modeling via Local Strain Mapping.

Nanolayered metallic alloys are promising materials for nuclear applications thanks to their resistance to radiation damage. Here, we investigate the effect of ion (C, Si, and Cu) irradiation at room temperature with different fluences into sputtered Zr/Nb metallic multilayer films with periods 27 nm (thin) and 96 nm (thick). After irradiation, while a high strain in the entire thin nanoscale metallic multilayer (NMM) is observed, a quite small strain in the entire thick NMM is established. This difference is further analyzed by a semianalytical model, and the reasons behind it are revealed, which are also validated by local strain mapping. Both methods show that within a thick layer, two opposite distortions occur, making the overall strain small, whereas in a thin layer, all the atomic planes are affected by the interface and are subjected to only a single type of distortion (Nb─tension and Zr─compression). In both thin and thick NMMs, with increasing damage, the strain around the interface increases, resulting in a release of the elastic energy at the interface (decrease in the lattice mismatch), and the radiation-induced transition of the Zr/Nb interfaces from incoherent to partially coherent occurs. Density functional theory simulations decipher that the inequality of point defect diffusion flux from the inner to the interface-affected region is responsible for the presence of opposite distortions within a layer. Technologically, based on this work, we estimated that Zr/Nb55 with thicknesses around Zr = 24 nm and Nb = 31 nm is the most promising multilayer system with the high radiation damage resistance and minimum swelling for nuclear applications.

Facilitating Uniform Large-Scale MoS2, WS2 Monolayers, and Their Heterostructures through van der Waals Epitaxy.

The fabrication process for the uniform large-scale MoS2, WS2 transition-metal dichalcogenides (TMDCs) monolayers, and their heterostructures has been developed by van der Waals epitaxy (VdWE) through the reaction of MoCl5 or WCl6 precursors and the reactive gas H2S to form MoS2 or WS2 monolayers, respectively. The heterostructures of MoS2/WS2 or WS2/MoS2 can be easily achieved by changing the precursor from WCl6 to MoCl5 once the WS2 monolayer has been fabricated or switching the precursor from MoCl5 to WCl6 after the MoS2 monolayer has been deposited on the substrate. These VdWE-grown MoS2, WS2 monolayers, and their heterostructures have been successfully deposited on Si wafers with 300 nm SiO2 coating (300 nm SiO2/Si), quartz glass, fused silica, and sapphire substrates using the protocol that we have developed. We have characterized these TMDCs materials with a range of tools/techniques including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), micro-Raman analysis, photoluminescence (PL), atomic force microscopy (AFM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and selected-area electron diffraction (SAED). The band alignment and large-scale uniformity of MoS2/WS2 heterostructures have also been evaluated with PL spectroscopy. This process and resulting large-scale MoS2, WS2 monolayers, and their heterostructures have demonstrated promising solutions for the applications in next-generation nanoelectronics, nanophotonics, and quantum technology.

Exploring Nanoscale Lubrication Mechanisms of Multilayer MoS2 During Sliding: The Effect of Humidity.

Solid lubricants have received substantial attention due to their excellent frictional properties. Among others, molybdenum disulfide (MoS2) is one of the most studied lubricants. Humidity results in a deterioration of the frictional properties of MoS2. The actual mechanism at the nanoscale is still under debate, although there are indications that chemical reactions are not likely to occur in defect-free structures. In this study, we performed nonequilibrium molecular dynamics simulations to study the frictional properties of multilayer MoS2 during sliding in the presence of water. Moreover, we also investigated the effect of sliding speed and normal load. We confirmed earlier results that a thin layer of water organizes as a solidified, ice-like network of hydrogen bonds as a result of being confined in a two-dimensional fashion between MoS2. Moreover, we found that there exists an energy-driven, rotational dependence of the water network atop/beneath MoS2. This orientational anisotropy is directly related to the dissipative character of MoS2 during sliding. Finally, three distinct frictional regimes were identified, two for a thin layer of water and one for bulk water. In the case of a thin layer and low coverage, water represents a solid-like contaminant, causing high energy dissipation. For a thin layer and high coverage, water starts to act as a solid-like lubricant, reducing dissipation during sliding. Finally, a regime where water acts as a liquid lubricant, characterized by a clear velocity dependence was found.

Investigation on the Thermodynamic Stability of Nanocrystalline W-Based Alloys: A Combined Theoretical and Experimental Approach.

The stability of nanostructured metal alloys is currently being extensively investigated, and several mathematical models have been developed to describe the thermodynamics of these systems. However, model capability in terms of thermal stability predictions strongly relies on grain boundary-related parameters that are difficult to measure or estimate accurately. To overcome this limitation, a novel theoretical approach is proposed and adopted in this work to identify W-based nanocrystalline alloys which are potentially able to show thermodynamic stability. A comparison between model outcomes and experimental findings is reported for two selected alloys, namely W-Ag and W-Al. Experimental results clearly highlight that W-Ag mixtures retain a segregated structure on relatively coarse length scales even after prolonged mechanical treatments. Moreover, annealing at moderate temperatures readily induces demixing of the constituent elements. In contrast, homogeneous nanostructured W-Al solid solutions are obtained by ball milling of elemental powders. These alloys show enhanced thermal stability with respect to pure W even at high homologous temperatures. Experimental evidences agree with model predictions for both the investigated systems.

Phototribology: Control of Friction by Light.

In dry sliding, the coefficient of friction depends on the material pair and contact conditions. If the material and operating conditions remain unchanged, the coefficient of friction is constant. Obviously, we can tune friction by surface treatments, but it is a nonreversible process. Here, we report active control of friction forces on TiO2 thin films under UV light. It is reversible and stable and can be tuned/controlled with the light wavelength. The analysis of atomic force microscopy signals by wavelet spectrograms reveals different mechanisms acting in the darkness and under UV. Ab initio simulations on UV light-exposed TiO2 show a lower atomic orbital overlapping on the surface, which leads to a friction reduction of up to 60%. We suggest that photocontrol of friction is due to the modification of atomic orbital interactions from both surfaces at the sliding interface.

Deformation Behavior of Nanocrystalline Body-Centered Cubic Iron with Segregated, Foreign Interstitial: A Molecular Dynamics Study.

In the present work, modified embedded atom potential and large-scale molecular dynamics' simulations were used to explore the effect of grain boundary (GB) segregated foreign interstitials on the deformation behavior of nanocrystalline (nc) iron. As a case study, carbon and nitrogen (about 2.5 at.%) were added to (nc) iron. The tensile test results showed that, at the onset of plasticity, grain boundary sliding mediated was dominated, whereas both dislocations and twinning were prevailing deformation mechanisms at high strain. Adding C/N into GBs reduces the free excess volume and consequently increases resistance to GB sliding. In agreement with experiments, the flow stress increased due to the presence of carbon or nitrogen and carbon had the stronger impact. Additionally, the simulation results revealed that GB reduction and suppressing GBs' dislocation were the primary cause for GB strengthening. Moreover, we also found that the stress required for both intragranular dislocation and twinning nucleation were strongly dependent on the solute type.

Nanotribological Investigation of Sliding Properties of Transition Metal Dichalcogenide Thin Film Coatings.

Transition metal dichalcogenide (TMD)-based coatings are known for their low friction performance, which is attributed to the formation of a tribolayer consisting almost exclusively of pure well-ordered TMD. However, the formation of such a tribolayer and its wear track coverage is still unknown. In this study, we employed surface mapping and nanotribological techniques to study the properties of the wear tracks of composite W-S-C coatings. Our analysis revealed that the as-deposited coating consisted of two phases, with significantly different nanoscale frictional properties. We attributed the phases to nanocrystalline WS2 (low friction) and amorphous solution of carbon and WS2 (high friction). The two phases wear at different rates, especially at lower loads, where we observed faster depletion of nanocrystalline WS2. In the wear track, sparse flat WS2 flakes were identified, suggesting that the recrystallization of the WS2 phase occurs only at the spots where the contact pressure is the highest.

Exploring the Stability of Twisted van der Waals Heterostructures.

Recent research showed that the rotational degree of freedom in stacking 2D materials yields great changes in the electronic properties. Here, we focus on an often overlooked question: are twisted geometries stable and what defines their rotational energy landscape? Our simulations show how epitaxy theory breaks down in these systems, and we explain the observed behavior in terms of an interplay between flexural phonons and the interlayer coupling, governed by the moiré superlattice. Our argument, applied to the well-studied MoS2/graphene system, rationalizes experimental results and could serve as guidance to design twistronic devices.