A Combined Experimental/Computational Study of Dicationic Ionic Liquids with Bromide and Tungstate Anions.

A panel of dicationic ionic liquids (DILs) with different rigid xylyl (ortho, meta, para) spacers and different anions (bromide and tungstate) has been synthetised and characterised through different experimental and computational techniques. Differences and analogies between the systems are analysed using information derived from their DFT structures, semiempirical dynamics, thermal behaviour, and catalytic properties versus the well-known reaction of CO2 added to epichlorohydrin. A comparison between the proposed systems and some analogues that present non-rigid spacers shows the key effect displayed by structure rigidity on their characteristics. The results show an interesting correlation between structure, flexibility, properties, and catalytic activity.

A Specific Interaction between Ionic Liquids' Cations and Reichardt's Dye.

Solvatochromic probes are often used to understand solvation environments at the molecular scale. In the case of ionic liquids constituted by an anion and a cation, which are designed and paired in order to obtain a low melting point and other desirable physicochemical properties, these two indivisible components can interact in a very different way with the probe. This is the case with one of the most common probes: Reichardt's Dye. In the cases where the positive charge of the cation is delocalized on an aromatic ring such as imidazolium, the antibonding orbitals of the positively charged aromatic system are very similar in nature and energy to the LUMO of Reichardt's Dye. This leads to an interesting, specific cation-probe interaction that can be used to elucidate the nature of the ionic liquids' cations. Parallel computational and experimental investigations have been conducted to elucidate the nature of this interaction with respect to the molecular structure of the cation.

Improved carbon dioxide absorption in double-charged ionic liquids.

Four divalent ionic liquids based on imidazolium cations with alkyl or ether functionalized side-chains were synthesised and characterized: 3,3'-(tetraethyleneglycol-1,11-diyl)bis(1-methyl-1H-imidazolium)bromide, [tetraEG(mim)2][Br]2, 3,3'-(tetraethyleneglycol-1,11-diyl)bis(1-methyl-1H-imidazolium)acetate, [tetraEG(mim)2][OAc]2, 1-butyl-3-methylimidazolium malonate, [C4mim]2[Mal], and 3-butyl-1-methylimidazolium glutarate, [C4mim]2[Glut]. Their densities vary between 1.1 and 1.5 g cm-3 and their viscosities between 0.2 and 4 Pa s at 353 K. We found that the molar volumes are not additive, especially in the case of the divalent ionic liquids based on the double-charged imidazolium cations, meaning that they cannot be predicted using common group contribution methods. The reason for this behaviour could be explained by the structure of the cations, which is dominated by intramolecular hydrogen bonding. The carboxylate-based divalent ionic liquids absorb reversibly large quantities of carbon dioxide following a chemical mechanism described before. An improved 1 : 1 stoichiometry is achieved both in a double-charged imidazolium acetate ionic liquid and in imidazolium carboxylate salts with double charged anions. This behaviour places these ionic liquids amongst the best performing for carbon dioxide absorption.

Expanding the Chemical Space of Benzimidazole Dicationic Ionic Liquids.

Benzimidazole dicationic ionic liquids (BDILs) have not yet been widely explored in spite of their potential. Therefore, two structurally related families of BDILs, paired with either bromide or bistriflimide anions and bearing alkyl spacers ranging from C3 to C6, have been prepared. Their thermal properties have been studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), while their electrical properties have been assessed by cyclic voltammetry (CV). TG analysis confirmed the higher stability of the bistriflimide BDILs over the bromide BDILs, with minor variation within the two families. Conversely, DSC and CV allowed for ascertaining the role played by the spacer length. In particular, the thermal behavior changed dramatically among the members of the bistriflimide family, and all three possible thermal behavior types of ILs were observed. Furthermore, cyclic voltammetry showed different electrochemical window (C3(C1BenzIm)2/2Tf2N < C4(C1BenzIm)2/2Tf2N, C5(C1BenzIm)2/2Tf2N < C6(C1BenzIm)2/2Tf2N) as well as a reduction peak potential, shape, and intensity as a function of the spacer length. The results obtained highlight the benefit of accessing a more structurally diverse pool of compounds offered by dicationic ILs when compared to the parent monocationic ILs. In particular, gains are to be found in the ease of fine-tuning their properties, which translates in facilitating further investigations toward BDILs as designer solvents and catalysts.

Unexpected Intrinsic Lability of Thiol-Functionalized Carboxylate Imidazolium Ionic Liquids.

New thiol-functionalized carboxylate ionic liquids (ILs), varying both for the cation and for the anion structures, have been prepared as new potential redox switching systems by reacting either 3-mercapto propionic acid (3-MPA) or N-acetyl-cysteine (NAC) with commercially available methyl carbonate ILs. Different ratios of thiol/disulfide ILs were obtained depending both on the acid employed in the neutralization reaction and on the reaction conditions used. Surprisingly, the imidazolium ILs displayed limited thermal stability which resulted in the formation of an imidazole 2-thione and a new sulfide ionic liquid. Conversely, the formation of the imidazole 2-thione was not observed when phosphonium disulfide ILs were heated, thus confirming the involvement of the imidazolium ring in an unexpected side reaction. An insight into the mechanism of the decomposition has been provided by means of DFT calculations.

Modifying bis(triflimide) ionic liquids by dissolving early transition metal carbamates.

The authors report the first modification of ionic liquids with metal carbamates. A selection of homoleptic N,N-dialkylcarbamates of group 4 and 5 metals, M(O2CNR2)n, were dissolved in bis(trifluoromethylsulfonyl)imide-based ionic liquids, i.e. [bmim][Tf2N] and [P(oct)4][Tf2N], at 293 K. The resulting solutions were characterized by means of IR, UV and NMR spectroscopy, and the data were compared to those of the respective metal compounds. Notably, the dissolution process did not proceed with the release of any of the original carbamato ligands, thus preserving the intact coordination frame around the metal centre. The solvation process of Ti(O2CNiPr2)4, as a model species, in [bmim][Tf2N] was rationalized by DFT calculations. As a comparative study, solutions of NbF5 and MCl5 (M = Nb, Ta) in [bmim][Tf2N] were also investigated, revealing the possible occurrence of solvent anion coordination to the metal centres.

Formation, Oxidation, and Fate of the Breslow Intermediate in the N-Heterocyclic Carbene-Catalyzed Aerobic Oxidation of Aldehydes.

The reaction paths and intermediate structures related to the formation of the Breslow intermediate and its oxidation along the oxidative/oxygenative lanes have been studied from a mechanistic point of view, with the support of gas-phase and computational studies. The results confirm the occurrence of a single-electron transfer from the Breslow intermediate to the molecular oxygen with formation of a radical couple that recombines either as a peroxide anion 7' to afford the aldehyde-to-carboxylic acid product or as a hydroperoxy derivative 7″ that evolved into an electrophilic acyl azolium, opening to the aldehyde-to-ester conversion. Steric factors enter into determining the different reactivity. All of the intermediates of both catalytic paths have been observed and characterized under mass spectrometric conditions. In particular, for the imidazoline catalyst, the (+)ESI-MS/(MS) detection of the genuine Breslow intermediate was made possible in virtue of its limited reactivity. Mechanistic aspects of the N-heterocyclic carbenes catalyzed aerobic oxidation of aldehydes shares important similarities with that one of the recently revisited benzoin condensation.

Dissolution of metal salts in bis(trifluoromethylsulfonyl)imide-based ionic liquids: studying the affinity of metal cations toward a "weakly coordinating" anion.

Despite the weakly coordinating ability of the bis(trifluoromethylsulfonyl)imide anion ([Tf2N](-)) the corresponding ionic liquids (ILs) are able to dissolve relevant amounts of metal salts having the same anion, M[Tf2N]x. To better understand the metal dissolution process we evaluated the interaction ability of a set of metal cations (Y(III), Al(III), Co(II), Ni(II), Cu(II), Zn(II), Ag(I), Li(I), and Na(I)) toward the [Tf2N](-) anion measuring the relative aptitude to give the corresponding anionic monocharged complex, [M(Tf2N)x+1](-) using the ESI-MS technique. UV-vis and NMR measurements were carried out to verify the consistence between the liquid and the gas phase. Density functional theory calculations have been used to identify the metal-containing species and determine their relative stability. An interesting correlation between interaction ability and chemical properties (Lewis acidity) was found.

Alkylation of Methyl Linoleate with Propene in Ionic Liquids in the Presence of Metal Salts.

Vegetable oils and fatty acid esters are suitable precursor molecules for the production of a variety of bio-based products and materials, such as paints and coatings, plastics, soaps, lubricants, cosmetics, pharmaceuticals, printing inks, surfactants, and biofuels. Here, we report the possibility of using Lewis acidic ionic liquids (ILs) to obtain polyunsaturated ester dimerization-oligomerization and/or, in the presence of another terminal alkene (propene), co-polymerization. In particular, we have tested the Lewis acidic mixtures arising from the addition of a proper amount of GaCl3 (Χ > 0.5) to two chloride-based (1-butyl-3-methylimidazolium chloride, [bmim]Cl, and 1-butylisoquinolium chloride, [BuIsoq]Cl) or by dissolution of a smaller amount of Al(Tf2N)3 (Χ = 0.1) in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][Tf2N]. On the basis of product distribution studies, [bmim][Tf2N]/Al(Tf2N)3 appears the most suitable medium in which methyl linoleate alkylation with propene can compete with methyl linoleate or propene oligomerization.

Computational studies on organic reactivity in ionic liquids.

Computational studies on organic reactions in ionic liquids (ILs) are analysed from different points of view. Important information about reaction mechanisms in ILs has been obtained from these studies although the theoretical approaches are still not able to give an exhaustive picture of the chemical processes occurring in ionic media. Challenges and perspectives of this investigation field are discussed and the fundamental role played by experimental results in the development of this intriguing sector is pointed out.

Betaine mediated enhancement of thermal stability and acidity tolerance of vanadium(V) solutions.

A panel of novel vanadium(IV)-betaine complexes has been synthesized according to new and efficient methodologies and characterized through both spectroscopic techniques and thermal analyses. Vanadium(IV)-betaine solutions have been electrochemically oxidized and the effect of betaine ligands on the thermal and pH stability of vanadium(V) solutions has been evaluated under different temperature and acidity conditions. The obtained results displayed a remarkable effect for both of the examined parameters, achieving the preparation of aqueous vanadium(V) solutions displaying long term stability at more than 55 °C under mild acidic conditions. The species formed in the betaine rich vanadium(V) solutions have been sprectroscopically identified in relationship with the acidity of the solution, and the obtained results were confirmed through computational techniques. Vanadium-betaine based solutions have been finally tested in a lab-scale redox flow battery setup, providing preliminary insight into the possible use of this type of electrolyte in VRFBs.

Challenging DESs and ILs in the valorization of food waste: a case study.

In this study, the efficacy of two of the best performing green solvents for the fractionation of lignocellulosic biomass, cholinium arginate (ChArg) as biobased ionic liquid (Bio-IL) and ChCl:lactic acid (ChCl:LA, 1:10) as natural deep eutectic solvent (NADES), was investigated and compared in the pretreatment of an agri-food industry waste, apple fibers (90°C for 1 h). For the sake of comparison, 1-butyl-3-methylimidazolium acetate (BMIM OAc) as one of the best IL able to dissolve cellulose was also used. After the pretreatment, two fractions were obtained in each case. The results gathered through FTIR and TG analyses of the two materials and the subsequent DNS assay performed after enzymatic treatment led to identify ChArg as the best medium to delignify and remove waxes, present on the starting apple fibers, thus producing a material substantially enriched in cellulose (CRM). Conversely, ChCl:LA did not provide satisfactorily results using these mild conditions, while BMIM OAc showed intermediate performance probably on account of the reduced crystallinity of cellulose after the dissolution-regeneration process. To corroborate the obtained data, FTIR and TG analyses were also performed on the residues collected after the enzymatic hydrolysis. At the end of the pretreatment, ChArg was also quantitatively recovered without significant alterations.

Coordination environment of highly concentrated solutions of Cu(II) in ionic liquids through a multidisciplinary approach.

The coordination environment around Cu(II) in highly concentrated solutions of copper(II) salts (CuCl(2) and Cu(Tf(2)N)(2)) in two pure ionic liquids bearing the same anion, namely, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([bmim][Tf(2)N]) and 1-butyl-3-methylimidazolium chloride ([bmim]Cl), is investigated by X-ray photoelectron spectroscopy (XPS), UV/Vis spectroscopy, EPR spectroscopy and DFT calculations. Moreover, the electrochemical behavior of these mixtures is studied. Whereas reversible reduction of Cu(II) to copper metal can be observed in the 1:1 [bmim][Tf(2)N]:Cu(Tf(2)N)(2) solution, 2:1 and 1:1 [bmim]Cl:CuCl(2) mixtures showed one-electron reduction of Cu(II) to Cu(I) with formation of a permanent deposit of CuCl. XPS, UV/Vis and EPR spectra as well as DFT calculations suggest the formation in [bmim]Cl of dynamic coordination complexes arising from the interaction between CuCl(2) and [bmim](+)Cl(-). The two long-lived situations are probably trigonal and deformed tetrahedral copper(II) chloride coordination complexes ([CuCl(3)](-) and [CuCl(4)](2-), respectively).

Interface properties of ionic liquids containing metal ions: features and potentialities.

Interfaces and surfaces are the regions where important events happen: catalysis, molecular recognition, charge transfer, polymerization, and many other critical processes take place at the boundary between one medium and another. In this article we discuss the interface (liquid/air) properties of ionic liquids (ILs) containing dissolved metal ions with the aim to show the possibility to use metal salts to transform ILs and their surfaces into engineered liquid supports to apply in material sciences, separation procedures or to use as optical devices.

The Structure-Property Relationship of Pyrrolidinium and Piperidinium-Based Bromide Organic Materials.

Two couples of dicationic ionic liquids, featuring pyrrolidinium and piperidinium cations and different linker chains, were prepared and characterized. 1,1'-(propane-1,3-diyl)bis(1-methylpyrrolidinium) bromide, 1,1'-(octane-1,8-diyl)bis(1-methylpyrrolidinium) bromide, 1,1'-(propane-1,3-diyl)bis(1-methylpiperidinium) bromide, and 1,1'-(octane-1,8-diyl)bis(1-methylpiperidinium) bromide were synthesized in quantitative yields and high purity and thermally characterized through TGA and DSC analysis. In this study, we propose a preliminary comparative evaluation of the effect of the linker chain length and of the size of the aliphatic ammonium ring on the thermal and solubility properties of bromide dicationic ionic liquids.

Sporopollenin Microcapsule: Sunscreen Delivery System with Photoprotective Properties.

In recent years, the demand for high-quality solar products that combine high efficacy with environmentally friendly characteristics has increased. Among the coral-safe sunscreens, ethylhexyl triazone (Uvinul® T150) is an effective organic UVB filter, photostable and practically insoluble in water, therefore difficult to be formulated in water-based products. Oil-free sunscreens are considered ideal for most skin types, as they are not comedogenic and do not leave the skin feeling greasy. Recent studies reported that pollen grains might represent innovative drug delivery systems for their ability to encapsulate and release active ingredients in a controlled manner. Before being used, the pollen grains must be treated to remove cellular material and biomolecules, which could cause allergic reactions in predisposed subjects; the obtained hollow structures possess uniform diameter and a rigid wall with openings that allow them to be filled with bioactive substances. In the present work, pollen from Lycopodium clavatum has been investigated both as a delivery system for ethylhexyl triazone and as an active ingredient by evaluating its photoprotective capacity. The goal is to obtain environmentally friendly solar aqueous formulations that take advantage of both sunscreen and sporopollenin microcapsules' UV protection with a relatively low cost, as these pollen grains are widely available.

A theoretical study of the copper(I)-catalyzed 1,3-dipolar cycloaddition reaction in dabco-based ionic liquids: the anion effect on regioselectivity.

The regioselectivity of copper(I)-catalyzed synthesis of 1,2,3-triazoles in dabco-based ionic liquids has been investigated at the DFT level using a supermolecular approach. The analysis of the theoretical results shows that the coordination ability of the ionic liquid (IL) anion to copper(I) catalyst and to all the other species containing the copper (intermediates and transition states) can significantly affect product distribution. Possible catalyst sequestering effects and the ability to stabilize selectively new intermediate species have been envisaged, as probable mechanisms throughout IL anions can affect copper catalyzed reactions inside performed.

pH-Responsive Nanostructures Based on Surface Active Fatty Acid-Protic Ionic Liquids for Imiquimod Delivery in Skin Cancer Topical Therapy.

For topical treatment of skin cancer, the design of pH-responsive nanocarriers able to selectively release the drug in the tumor acidic microenvironment represents a reliable option for targeted delivery. In this context, a series of newly synthesized surface-active fatty acid-protic ionic liquids (FA-PILs), based on tetramethylguanidinium cation and different natural hydrophobic fatty acid carboxylates, have been investigated with the aim of developing a pH-sensitive nanostructured drug delivery system for cutaneous administration in the skin cancer therapy. The capability of FA-PILs to arrange in micelles when combined with each other and with the non-ionic surfactant d-α-Tocopherol polyethylene glycol succinate (vitamin E TPGS) as well as their ability to solubilize imiquimod, an immuno-stimulant drug used for the treatment of skin cancerous lesions, have been demonstrated. The FA-PILs-TPGS mixed micelles showed pH-sensitivity, suggesting that the acidic environment of cancer cells can trigger nanostructures' swelling and collapse with consequent rapid release of imiquimod and drug cytotoxic potential enhancement. The in vitro permeation/penetration study showed that the micellar formulation produced effective imiquimod concentrations into the skin exposed to acid environment, representing a potential efficacious and selective drug delivery system able to trigger the drug release in the tumor tissues, at lower and less irritating drug concentrations.

Effect of ionic liquids on the Menschutkin reaction: an experimental and theoretical study.

The effect of ionic liquids (ILs) on the Menschutkin reaction between N-methylimidazole and benzyl halides has been investigated. Hammett correlations have been used to obtain information on the reaction mechanism of benzyl chlorides in ionic and molecular solvents. The solvent effects on this reaction have been examined using both multiparameter linear solvation energy relationships and theoretical calculations. These latter have been performed using a supermolecular approach, i.e., the IL is represented by an explicit ionic pair, IP. Two possible different reaction pathways have been obtained changing the position of the IL-IP with respect to the reagents. It is hypothesized that inside the IL the Menschutkin reaction of benzyl chloride with N-methylimidazole can follow different reaction pathways by considering the influence of dynamic heterogeneity in ionic media on the time scale of the lifetime of a transition state.

Combined Use of Scanning Electron Microscopy-Energy-Dispersive X-ray Spectroscopy and Fourier Transform Infrared Imaging Coupled with Principal Component Analysis in the Study of Ancient Egyptian Papyri.

This paper reports the results of a spectroscopic study on the chemistry of some small papyrus fragments arising from three Egyptian excavation sites. The aim of this investigation was to verify the possibility to identify significant differences in ancient Egyptian papyri using noninvasive analytical methods, that is, ATR (attenuated total reflection)-FTIR (Fourier transform infrared) spectroscopic imaging and scanning electron microscopy-energy-dispersive X-ray spectroscopy. Differences in both lignin and cellulose compositions, which are difficult to detect with traditional FTIR and FTIR imaging spectral analysis, were revealed by the multivariate approach, and the second derivative spectroscopy was applied to enhance the spectrum resolution. Thus, it has been possible to recognize a fragment characterized by the presence of lead and of long chain aliphatic organic compound, which are not present in the other fragments, in the ink region. These data show not only that the combination of these techniques can provide important chemical information, such as to evidence the different compositions and manufacture of each papyrus, but also that metal inks were probably used also in ancient Egyptian papyri.