Photodynamic inactivation of circulating tumor cells: An innovative approach against metastatic cancer.

The spread of a primary malignant tumor is the major reason for most of the cancer-associated deaths. To this day, treatment regimen and available drugs are still insufficient to manage these conditions. In this work, a new therapeutic concept based on photodynamic therapy (PDT) of metastasis-initiating cells is introduced. To address this issue, an experimental model was developed to simulate the movement and photodynamic inactivation of circulating tumor cells (CTCs) in vitro. Using curcumin loaded poly(lactic-co-glycolic acid) nanoparticles, a significant reduction in the cell viability of human breast cancer cells (MDA-MB-231) could be achieved after 30 min laser irradiation (λ = 447 nm, P = 100mW) under flow conditions (5 cm s-1). Confocal laser scanning microscopy images confirmed the immediate accumulation of curcumin on the cell membrane and an increased fluorescence signal after irradiation. PDT caused time-dependent morphological cell alterations (i.e. membrane evaginations and disruption) indicating apoptosis and early necrosis. During the photoactivation of curcumin, a blue shift in the absorption spectra and a decrease in the curcumin content could be determined. This study confirms that the presented experimental model is suitable for in vitro investigations of CTCs under in vivo-like conditions, at the same time encouraging the clinical implementation of PDT as an innovative strategy against metastasis.

Development of a fast and precise method for simultaneous quantification of the PLGA monomers lactic and glycolic acid by HPLC.

Poly(lactide-co-glycolide acid) (PLGA) is an extraordinary well-described polymer and has excellent pharmaceutical properties like high biocompatibility and good biodegradability. Hence, it is one of the most used materials for drug delivery and biomedical systems, also being present in several US Food and Drug Administration-approved carrier systems and therapeutic devices. For both applications, the quantification of the polymer is inalienable. During the development of a production process, parameters like yield or loading efficacy are essential to be determined. Although PLGA is a well-defined biomaterial, it still lacks a sensitive and convenient quantification approach for PLGA-based systems. Thus, we present a novel method for the fast and precise quantification of PLGA by RP-HPLC. The polymer is hydrolyzed into its monomers, glycolic acid and lactic acid. Afterwards, the monomers are derivatized with the absorption-enhancing molecule 2,4'-dibromoacetophenone. Furthermore, the wavelength of the derivatized monomers is shifted to higher wavelengths, where the used solvents show a lower absorption, increasing the sensitivity and detectability. The developed method has a detection limit of 0.1 µg/mL, enabling the quantification of low amounts of PLGA. By quantifying both monomers separately, information about the PLGA monomer ratio can be also directly obtained, being relevant for degradation behavior. Compared to existing approaches, like gravimetric or nuclear magnetic resonance measurements, which are tedious or expensive, the developed method is fast, ideal for routine screening, and it is selective since no stabilizer or excipient is interfering. Due to the high sensitivity and rapidity of the method, it is suitable for both laboratory and industrial uses.

Development of inhalable curcumin loaded Nano-in-Microparticles for bronchoscopic photodynamic therapy.

Photodynamic therapy is amongst the most rapidly developing therapeutic strategies against cancer. However, most photosensitizers are administered intravenously with very few reports about pulmonary applications. To address this issue, an inhalable formulation consisting of nanoparticles loaded with photosensitizer (i.e. curcumin) was developed. The nanoparticles were prepared using nanoprecipitation method. Dynamic light scattering measurements of the curcumin loaded nanoparticles revealed a hydrodynamic diameter of 181.20 ±â€¯11.52 nm. In vitro irradiation experiments with human lung epithelial carcinoma cells (A549) showed a selective cellular toxicity of the nanoparticles upon activation using LED irradiating device. Moreover, curcumin nanoparticles exhibited a dose-dependent photocytotoxicity and the IC50 values of curcumin were directly dependent on the radiation fluence used. The nanoparticles were subsequently spray dried using mannitol as a stabilizer to produce Nano-in-Microparticles with appropriate aerodynamic properties for a sufficient deposition in the lungs. This was confirmed using the next generation impactor, which revealed a large fine particle fraction (64.94 ±â€¯3.47%) and a mass median aerodynamic diameter of 3.02 ±â€¯0.07 µm. Nano-in-Microparticles exhibited a good redispersibility and disintegrated into the original nanoparticles upon redispersion in aqueous medium. The Langmuir monolayer experiments revealed an excellent compatibility of the nanoparticles with the lung surfactant. Results from this study showed that the Nano-in-Microparticles are promising drug carriers for the photodynamic therapy of lung cancer.

Nano spray dried antibacterial coatings for dental implants.

Nanostructured coatings of dental implants have shown great potential in overcoming many challenges responsible for implant failure. In this study, nano spray drying technology was utilized to produce novel biocompatible nanocoatings with antibacterial activity. The experiments were applied on titanium discs, which were used as a model material for dental implants. The produced nanocoatings consisted of poly(lactic-co-glycolic acid) as a biodegradable polymer and norfloxacin as a model antibiotic. Scanning electron microscopy results revealed an average particle size ranging between 400 and 600 nm. In vitro release studies showed a biphasic drug release profile with a burst release within the first 48 h, followed by a sustained release phase until the end of the experiment. The antibacterial activity of the nanocoatings was evaluated against Escherichia coli where the norfloxacin loaded nanocoatings achieved up to 99.83% reduction in the number of viable bacterial colonies. Finally, in vitro biocompatibility of the nanocoatings was investigated using mouse fibroblasts (L929) as a standard sensitive cell line for cytotoxicity assessment. Cell proliferation on the surface of the titanium discs was studied using fluorescence microscopy followed by cell counting assay. Both methods confirmed the biocompatibility of the examined nanocoatings. In conclusion, nano spray drying is a promising technique for preparing tailor-made nanocoatings, thereby representing an innovative approach for the surface modification of dental implants.

Spray dried curcumin loaded nanoparticles for antimicrobial photodynamic therapy.

Antimicrobial resistance is one of the most serious problems that researchers of multiple disciplines are working on. The number of new antibiotics and their targeted structures have continuously decreased emphasizing the demand of alternative therapy for bacterial infections. Photodynamic therapy is such a promising strategy that has been proven to be effective against a wide range of bacterial strains. In this study, an inhalable nanoformulation for photodynamic therapy against respiratory infections was developed in the form of nano-in-microparticles consisting of curcumin nanoparticles embedded in a mannitol matrix. The produced nano-in-microparticles exhibited suitable aerodynamic properties with a mass median aerodynamic diameter of 2.88 ±â€¯0.13 µm and a high fine particle fraction of 60.99 ±â€¯9.50%. They could be readily redispersed in an aqueous medium producing the original nanoparticles without any substantial changes in their properties. This was confirmed using dynamic light scattering and electron microscopy. Furthermore, the redispersed nanoparticles showed an efficient antibacterial photoactivity causing 99.99992% (6.1log10) and 97.75% (1.6log10) reduction in the viability of Staphylococcus saprophyticus subsp. bovis and Escherichia coli DH5 alpha respectively. Based on these findings, it can be concluded that nano-in-microparticles represent promising drug delivery systems for antimicrobial photodynamic therapy.

Aspherical, Nanostructured Microparticles for Targeted Gene Delivery to Alveolar Macrophages.

Introducing novel shapes to particulate carrier systems adds unique features to modern drug and gene delivery. Depending on the route of administration, particle geometry can influence deposition and fate within biological environments. In this work, a template-assisted engineering technique is applied, providing full control of size and shape in the preparation of aspherical, nanostructured microparticles. Based on the interconnection of nanoparticles, stabilized by a functional layer-by-layer (LbL) coating, the resulting cylindrical micrometer architecture is especially qualified for pulmonary delivery. Designed as gene delivery system, plasmid-DNA (pCMV-luciferase) and branched polyethylenimine are used to reach both structural integrity of the carrier system and delivery of genes into the cells of interest. Due to their size, particles are exclusively taken up by phagocytes, which also adds a targeting effect to the introduced system. The luciferase expression is demonstrated in macrophages showing increasing levels over a time period of at least 7 d. Furthermore, it is shown for the first time that the expression is depending on the LbL design. From in vivo experiments, corresponding luciferase expression is observed in mice alveolar macrophages. Combining site specific transport with the possibility of genetically engineering immunocompetent phagocytes, the presented system offers promising potential to improve applications for cell-based immunotherapy.

Development of a fast and precise method for simultaneous quantification of the PLGA monomers lactic and glycolic acid by HPLC / 药物分析学报

Poly(lactide-co-glycolide acid) (PLGA) is an extraordinary well-described polymer and has excellent pharmaceutical properties like high biocompatibility and good biodegradability. Hence, it is one of the most used materials for drug delivery and biomedical systems, also being present in several US Food and Drug Administration-approved carrier systems and therapeutic devices. For both applications, the quantification of the polymer is inalienable. During the development of a production process, parameters like yield or loading efficacy are essential to be determined. Although PLGA is a well-defined biomaterial, it still lacks a sensitive and convenient quantification approach for PLGA-based systems. Thus, we present a novel method for the fast and precise quantification of PLGA by RP-HPLC. The polymer is hydrolyzed into its monomers, glycolic acid and lactic acid. Afterwards, the monomers are derivatized with the absorption-enhancing molecule 2,4′-dibromoacetophenone. Furthermore, the wavelength of the deri-vatized monomers is shifted to higher wavelengths, where the used solvents show a lower absorption, increasing the sensitivity and detectability. The developed method has a detection limit of 0.1 μg/mL, enabling the quantification of low amounts of PLGA. By quantifying both monomers separately, in-formation about the PLGA monomer ratio can be also directly obtained, being relevant for degradation behavior. Compared to existing approaches, like gravimetric or nuclear magnetic resonance measure-ments, which are tedious or expensive, the developed method is fast, ideal for routine screening, and it is selective since no stabilizer or excipient is interfering. Due to the high sensitivity and rapidity of the method, it is suitable for both laboratory and industrial uses.