Mechanisms of root reinforcement in soils: an experimental methodology using four-dimensional X-ray computed tomography and digital volume correlation.

Vegetation on railway or highway slopes can improve slope stability through the generation of soil pore water suctions by plant transpiration and mechanical soil reinforcement by the roots. To incorporate the enhanced shearing resistance and stiffness of root-reinforced soils in stability calculations, it is necessary to understand and quantify its effectiveness. This requires integrated and sophisticated experimental and multi-scale modelling approaches to develop an understanding of the processes at different length scales, from individual root-soil interaction through to full soil-profile or slope scale. One of the challenges with multi-scale models is ensuring that they sufficiently closely represent real behaviour. This requires calibration against detailed high-quality and data-rich experiments. This study presents a novel experimental methodology, which combines in situ direct shear loading of a willow root-reinforced soil with X-ray computed tomography to capture the three-dimensional chronology of soil and root deformation within the shear zone. Digital volume correlation (DVC) analysis was applied to the computed tomography dataset to obtain full-field three-dimensional displacement and strain information. This paper demonstrates the feasibility and discusses the challenges associated with DVC experiments on root-reinforced soils.

Behaviour of under sleeper pads at switches and crossings - Field measurements.

Major growth in rail traffic in many parts of the world in recent years has brought railway networks close to capacity and restricted the time available for track access to carry out maintenance work without costly temporary route closures. There are, therefore, significant benefits in designing or modifying ballasted track systems to reduce maintenance and associated access requirements. Under sleeper pads (USPs) offer the potential to extend ballasted track system life and to extend the intervals between routine maintenance. This paper presents and evaluates field measurements, made using geophones and high speed filming with digital image correlation (DIC), of the performance of a renewed section of track incorporating two switches and crossings (S&C) over a period of two years. One S&C was fitted with two types of USP (categorised as medium and soft), while the other had no USPs and acted as a control. Measurements demonstrate that the bearers with USPs fitted showed less variability in movement than bearers without USPs fitted. The provision of soft USPs caused large increases (>40%) in vertical bearer movements relative to bearers without USPs, although the medium USPs showed little difference. Increased movements of elongated bearers supporting both tracks fitted with soft USPs led to increased bearer rotations towards the loaded track. This effect was aided by the rigid steel collar fixing in the middle of the bearer used in this design of S&C, and raises questions concerning the desirability of this feature. DIC measurements showed that the at rest position of the elongated bearers rotated towards the track on which a train had most recently passed.

Clastogenic activity of bile acids and organic acid fractions of human feces.

Chloroform extracts of fecal material from 4 subjects on normal mixed western diets were fractionated to obtain an acid fraction and a hexane extract containing neutrals and bases. The acid fraction from at least 2 of the donors induced an elevated frequency of chromosomal aberrations and exchanges in Chinese hamster ovary (CHO) cells. Since acid steroids are expected to be present in the acid fraction, 5 bile acids were assayed for clastogenic activity in CHO cells. Ursodeoxycholic acid induced chromosomal aberrations and exchanges, and this effect was enhanced by the addition of a microsomal S9 mix. However, the enhancement is probably due to physical factors rather than to enzymatic activity.

Antimutagenic activity of browning reaction products.

The Salmonella typhimurium assay was used to determine the antimutagenic effect of products of 2 non-enzymatic browning reactions obtained by heating a lysine-fructose mixture at 121 degrees C for 1 h and by carmelizing D-sucrose at 180 degrees C for 1.5 h. The antimutagenic effect was tested by exposing strain TA1535 in suspension to N-methyl-N' -nitro-N-Nitrosoguanidine (MNNG) in the presence of the browning reaction products. In the case of aflatoxin B1, strain TA98 was used and the browning reaction products were added to the precarcinogen and an S9 mixture. The mutagenic activity of both carcinogens was significantly suppressed by the browning reaction products.

Clastogenic activity of dried fruits.

The clastogenic activities of several commercially-dried fruits, including black and golden-seedless raisins, medium-sized California prunes, table dates, bananas, California black mission figs and breakfast apricots, were examined using Chinese hamster ovary (CHO) cells as the test organism and chromosome aberrations as the endpoint. Treatment of the CHO cells with water extracts of these dried fruits significantly increased the frequencies of metaphase plates with 1 chromosome break or exchange as well as the average number of chromosome exchanges per metaphase plate. A liver microsomal S9 mixture reduced this clastogenic activity. Dried fruits represent an example of widely consumed food products with strong genotoxic activities.

The action of transition metals on the genotoxicity of simple phenols, phenolic acids and cinnamic acids.

Simple phenols (catechol, 4-methyl catechol, resorcinol, phloroglucinol and pyrogallol), phenolic acids (p-hydroxybenzoic acid, protocatechuic acid, vanillic acid, gallic acid, syringic acid and salicylic acid), a phenylacetic acid (3,4-dihydroxyphenylacetic acid) and eugenol were assayed for clastogenic activity in Chinese hamster ovary (CHO) cells with and without the addition of a n S9 mixture, Cu2+ (10-4M) and Mn2+ (10-4M). All dihydroxylated and trihydroxylated phenolics induced chromatid breaks and exchanges. The introduction of a methyl group seems to reduce the clastogenic capacity. The addition of an S9 mixture or the transition metals Cu2+ and Mn2+ enhanced the chromosome-damaging activity in some phenolics and suppressed it in others.

Clastogenicity of furans found in food.

Cultured Chinese hamster ovary (CHO) cells were exposed for 3 h to furan and 6 furan derivatives (furfural, furfuryl alcohol, 5-methyl furfural, 2-methyl furan, 2,5-dimethyl furan and 2-furyl methyl ketone). Each of the 6 furan derivatives induced a relatively high frequency of chromatid breaks and chromatid exchanges in the absence of a liver microsomal activation preparation. The response of the furans to the addition of an S9 mixture differed. The clastogenic activities of 5-methyl furfural, 2-furyl methyl ketone, furfural and furfuryl alcohol were increased, whereas that of 2-methyl furan and 2,5-dimethyl furan were significantly decreased. Furan itself showed a clastogenic activity only in the presence of an S9 mixture.

Browning reaction systems as sources of mutagens and antimutagens.

Heated food systems contain hundreds of chemical compounds, some being mutagenic and others being antimutagenic. Studies have indicated that foods exposed to drying, frying, roasting, baking, and broiling conditions possess net mutagenic activity as assessed by the Ames/Salmonella/microsome mutagenicity test and the chromosome aberration assay with Chinese hamster ovary (CHO) cells. With the above-mentioned heat treatment of food, nonenzymic browning reactions are generally proceeding at rapid rates and are involved in the development of mutagens. Caramelization and Maillard reactions are two important pathways in the nonenzymic browning of food and are responsible for the formation of volatile aromatic compounds, intermediate nonvolatile compounds, and brown pigments called melanoidins. Heated sugar-amino acid mixtures possessed mutagenic activities which have been assessed by short-term bioassays. Purified Maillard and caramelization reaction products such as reductones, dicarbonyls, pyrazines, and furan derivatives have exhibited mutagenicity and clastogenicity. The water-insoluble fraction (WIF) of instant coffee and a model-system melanoidin (MSM) have been shown to inhibit the mutagenicity of known carcinogens--aflatoxin B1 (AFB1), N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), and benzo(a)pyrene (BP)--in aqueous dispersion. WIF and MSM were found to be effective binding agents for the carcinogens.

Clastogenic activity of caramel and caramelized sugars.

Cultured Chinese hamster ovary (CHO) cells were exposed for 3 h to caramelized solutions of the sugars sucrose, glucose, mannose, arabinose, maltose and fructose. Each of these caramelized sugars induced a relatively high frequency of chromosome breaks and exchanges in the treated cells. The non-caramelized sugars did not increase the frequency of chromosome aberrations. A potent clastogenic effect was also observed when a commercially used caramel powder was assayed. Up to 54% of all examined metaphase plates of the treated CHO cells had at least one chromosome break or exchange. This chromosome-damaging action of commercial caramel powder was reduced in the presence of liver microsomal (S9) preparation or FeII and FeIII. The transition metals CuII and MnII neither enhanced nor reduced the clastogenic activity of the caramel powder.

Induction of mitotic gene conversion by browning reaction products and its modulation by naturally occurring agents.

Mitotic gene conversion in the D7 strain of Saccharomyces cerevisiae was significantly enhanced by exposure to non-enzymatic browning reaction products. These products were formed during the heating of sugar (caramelization reaction) or sugar-amino acid mixtures (Maillard reaction) at temperatures normally used during the cooking of food. Several modulating factors of this convertogenic activity were identified. These factors included two main groups: (1) trace metals which are widely distributed in the environment; and (2) several cellular enzymatic systems. The convertogenic activities of a heated glucose-lysine mixture and a commercial caramel powder were completely suppresses when yeast were concurrently exposed to these products and to either FeIII or CuII. Equimolar concentrations of MnII or sodium selenite had no effect on the convertogenic activity of the products of either model system. Horse-radish peroxidase, beef liver catalase and rat liver S9 preparations each decreased the frequency of gene conversion induced by the caramel powder and the heated glucose-lysine products. This modulating activity of the enzymes was lost if they were heat-inactivated. These studies indicate the presence of a variety of protective mechanisms which can modify genotoxic components in complex food mixtures.

A comparative genotoxicity study of chlorogenic acid (3-0-caffeoylquinic acid).

Chlorogenic acid, a compound which occurs naturally in many food items, was assayed for genotoxic activity in 3 different test systems: reverse mutations in the preincubation test with Salmonella typhimurium, gene conversion with Saccharomyces cerevisiae strain D7, and chromosome aberrations in Chinese hamster ovary (CHO) cells. Chlorogenic acid was directly convertogenic and clastogenic, but lacked a mutagenic capacity in the Salmonella bioassay. The transition metal Mn2+ enhanced the clastogenic and convertogenic activity of chlorogenic acid. In the presence of Mn2+ (10(-4)M), chlorogenic acid increased the frequency of his+ revertants in TA98 and TA100 strains of S. typhimurium. Caffeic acid and, to a lesser degree, quinic acid, which are components of chlorogenic acid, also showed genotoxic activity. The results show the importance of using several assays in combination with transition metals when testing for genotoxicity.

Synthesis, purification and characterization of 7-ketocholesterol and epimeric 7-hydroxycholesterols.

Various methods were assessed for the synthesis of 7-ketocholesterol and epimeric 7-hydroxycholesterols. Upon the oxidation of cholesteryl acetate with t-butyl chromate, the resulting ketosterol acetate crystallized from methanol consisted of about 25% unoxidized cholesteryl acetate. After the sterol acetates were hydrolyzed in an aqueous K(2)CO(3) medium, preparative TLC was used to fractionate the ketone from cholesterol.Of all the reducing agents employed, only LiAlH(4) reduced completely the purified 7-ketocholesterol to 7-hydroxycholesterols without side reaction products and ketone contamination. Yields of 21.3 mg of 7alpha-hydroxycholesterol and 72.6 mg of 7beta-hydroxycholesterol were obtained by preparative TLC of a diol mixture prepared by the LiAlH(4)-reduction of 100 mg of 7-ketocholesterol. To accomplish the preparative TLC separation of diol bands without overlapping, a double development of a chromatoplate with ethyl ether-cyclohexane (90ratio10, v/v) and ethyl ether was essential.Data on the melting point, optical rotation and infrared spectra, as well as TLC and GLC characteristics, were obtained for purified 7-ketocholesterol and epimeric 7-hydroxycholesterols.

Isolation and characterization of cholesterol-5B,6B-oxide from an aerated aqueous dispersion of cholesterol.

An unknown autoxidation product in an aerated cholesterol sol was isolated by preparative thin layer chromatography. This compound was identified as cholesterol-5beta,6beta-oxide by gas liquid chromatography along with infrared and mass spectrometry.

Modelling the compression behaviour of landfilled domestic waste.

This paper discusses the mechanisms involved in the compression of domestic waste, and how the resulting compression behaviour may be modelled. Reference is made to experimental data illustrating the effect of gas content and pore water pressure on bulk density and drainable porosity, and a theoretical model able to reproduce some but not all features of the data is presented.

Biodegradation and flushing of MBT wastes.

Mechanical-biological treatment (MBT) processes are increasingly being adopted as a means of diverting biodegradable municipal waste (BMW) from landfill, for example to comply with the EU Landfill Directive. However, there is considerable uncertainty concerning the residual pollution potential of such wastes. This paper presents the results of laboratory experiments on two different MBT waste residues, carried out to investigate the remaining potential for the generation of greenhouse gases and the flushing of contaminants from these materials when landfilled. The potential for gas generation was found to be between 8% and 20% of that for raw MSW. Pretreatment of the waste reduced the potential for the release of organic carbon, ammoniacal nitrogen, and heavy metal contents into the leachate; and reduced the residual carbon remaining in the waste after final degradation from ∼320g/kg dry matter for raw MSW to between 183 and 195g/kg dry matter for the MBT wastes.

Clogging of landfill tyre and aggregate drainage layers by methanogenic leachate and implications for practice.

This paper reports the results of pilot scale tests carried out to investigate the clogging of shredded and baled tyres in comparison with aggregates when percolated by leachates representative of those generated by methanogenic stage landfills. Realistic lifetime loading rates of methanogenic leachate were applied, and clogging was not generally apparent in any of the drainage media studied. This is in apparent contrast to many other studies that have demonstrated the susceptibility of all forms of drainage media to biological and chemical clogging when percolated with high strength organic and calcium rich leachates. The reasons for this difference are identified, the implications for landfill drainage system design are discussed and some suggestions for operational practice are presented for discussion.

Quantifying the effect of settlement and gas on solute flow and transport through treated municipal solid waste.

The effect of degradation and settlement on transport properties of mechanically and biologically treated (MBT) waste was examined by applying three different tracers to two waste columns (~0.5 m diameter) in a series of closed-loop experiments. One column was allowed to biodegrade and the other was bio-suppressed. Permeability and drainable porosity were reduced by settlement, in line with previous results. A dual-porosity model performed well against the data and suggested that more preferential flow occurred early on in the un-degraded column. Diffusion timescales were found to be between 0.8 and 6 days. Volumetric water contents of the mobile region were found to be small in the bio-suppressed cell (~0.01) and even smaller values were found in the degrading waste, possibly due to displacement by gas. Once either settlement or gas production had disrupted this pattern into a more even flow, subsequent compression made little difference to the diffusion time-scale. This may indicate that transport was thereafter dominated by other aspects of the waste structure such as the distribution of low-permeability objects. The presence of gas in the degrading waste reduced the volumetric water content through displacement. The model indicated that the gas was primarily located in the more mobile porosity fraction. Primary compression of the degrading waste tended to squeeze this gas out of the waste in preference to water.

Investigations into the landfill behaviour of pretreated wastes.

Mechanical-biological treatment of municipal solid waste has become popular throughout the UK and other parts of Europe to enable compliance with the Landfill Directive. Pretreatment will have a major influence on the degradation and settlement characteristics of the waste in landfills owing to the changes in the composition and properties of the wastes. This paper presents and compares the results of long term landfill behaviour of the UK and German MBT wastes pretreated to different standards. The gas generating potential, leachate quality and settlement characteristics are highlighted. The results reveal that it is possible to achieve stabilisation of MBT waste within a year and the biogas yield and leachate strength of German MBT waste was significantly reduced compared with the UK MBT waste. The settlement resulting from mechanical creep is more significant than the biodegradation induced settlement in both cases.

Leachate recirculation in a landfill: some insights obtained from the development of a simple 1-D model.

The re-introduction of leachate back into the waste can play an important part in landfill management. It can encourage biodegradation by raising the water content and transporting bacteria, nutrients and waste products. It also enables leachate to be stored within the body of the landfill, for example to help minimise temporal variations in the load on a leachate treatment plant. It is helpful for a landfill operator to be able to estimate the rate at which the landfill can accept leachate (the maximum infiltration or injection rate), the storage capacity of the landfill and the leachate retention time. This paper discusses some of the insights obtained from the development and application of a simple conceptual model of leachate recirculation that can be used to estimate key parameter values on the basis of the hydraulic properties of the waste. The model is described, partly validated against a more rigorous numerical analysis, and then used to interpret data obtained from field tests on a real site. The shortcomings of the model in its current form are discussed, and suggestions are made as to how these might be addressed in the context of developing the model as a design tool.