RESUMO
Core-shell structures with magnetic core and metal/polymer shell provide a new opportunity for constructing highly efficient mediator for magnetic fluid hyperthermia. Herein, a facile method is described for the synthesis of superparamagnetic LSMO@Pluronic F127 core-shell nanoparticles. Initially, the surface of the LSMO nanoparticles is functionalized with oleic acid and the polymeric shell formation is achieved through hydrophobic interactions with oleic acid. Each step is optimized to get good dispersion and less aggregation. This methodology results into core-shell formation, of average diameter less than 40 nm, which was stable under physiological conditions. After making a core-shell formulation, a significant increase of specific absorption rate (up to 300%) has been achieved with variation of the magnetization (<20%). Furthermore, this high heating capacity can be maintained in various simulated physiological conditions. The observed specific absorption rate is almost higher than Fe3O4. MTT assay is used to evaluate the toxicity of bare and core-shell MNPs. The mechanism of cell death by necrosis and apoptosis is studied with sequential staining of acridine orange and ethidium bromide using fluorescence and confocal microscopy. The present work reports a facile method for the synthesis of core-shell structure which significantly improves SAR and biocompatibility of bare LSMO MNPs, indicating potential application for hyperthermia.
Assuntos
Materiais Biocompatíveis/química , Coloides/química , Nanopartículas de Magnetita/química , Animais , Apoptose/efeitos dos fármacos , Materiais Biocompatíveis/toxicidade , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Coloides/toxicidade , Estabilidade de Medicamentos , Temperatura Alta , Nanopartículas de Magnetita/toxicidade , Teste de Materiais , Camundongos , Mitocôndrias/metabolismo , PoloxâmeroRESUMO
Magnetic nanoparticles based hyperthermia therapy is a possible low cost and effective technique for killing cancer tissues in the human body. Fe3O4 and Fe3O4@YPO4:5Eu hybrid magnetic nanoparticles are prepared by co-precipitation method and their average particle sizes are found to be â¼10 and 25 nm, respectively. The particles are spherical, non-agglomerated and highly dispersible in water. The crystallinity of as-prepared YPO4:5Eu sample is more than Fe3O4@YPO4:5Eu hybrid magnetic nanoparticles. The chemical bonds interaction between Fe3O4 and YPO4:5Eu is confirmed through FeO-P. The magnetization of hybrid nanocomposite shows magnetization Ms = 11.1 emu g(-1) with zero coercivity (measured at 2 × 10(-4) Oe) at room temperature indicating superparamagnetic behaviour. They attain hyperthermia temperature (~42 °C) under AC magnetic field showing characteristic induction heating of the prepared nanohybrid and they will be potential material for biological application. Samples produce the red emission peaks at 618 nm and 695 nm, which are in range of biological window. The quantum yield of YPO4:5Eu sample is found to be 12%. Eu(3+) present on surface and core could be distinguished from luminescence decay study. Very high specific absorption rate up to 100 W g(-1) could be achieved. The intracellular uptake of nanocomposites is found in mouse fibrosarcoma (Wehi 164) tumor cells by Prussian blue staining.
Assuntos
Európio/química , Óxido Ferroso-Férrico/química , Nanopartículas de Magnetita/química , Ítrio/química , Animais , Linhagem Celular , Hipertermia Induzida , Nanopartículas de Magnetita/uso terapêutico , Camundongos , Neoplasias/tratamento farmacológico , Tamanho da Partícula , Teoria QuânticaRESUMO
Surface of La(0.7)Sr(0.3)MnO3 (LSMO) magnetic nanoparticles (MNPs) is functionalized with polymer (dextran) and their colloidal stability in various mediums is carried out. The influence of the surface functionalization of LSMO MNPs on their colloidal stability in physiological media is studied and correlated with their hyperthermia properties. Many studies have concerned the colloidal stability of MNPs coated with polymer, but their long-term stability when such complexes are exposed to physiological media is still not well understood. After zeta potential study, it is found that the dextran coating on MNPs improves the colloidal stability in water as well as in physiological media like PBS. The specific absorption rates (SAR) of these MNPs are found to be in 50-85 W/g in different concentrations of glucose and NaCl; and there values are suitable for hyperthermia treatment of cancer cells under AC magnetic field. After incorporation of MNPs up to 0.2-1mg/mL in 2 × 10(5)cells/mL (L929), the apoptosis and necrosis studies are carried out by acridine orange and ethidium bromide (AO and EB) staining and followed by visualization of microstructures under a fluorescence microscope. It is found that there are no morphological changes (i.e. no signs of cell rounding, bubble formation on the membrane and nuclear fragmentation) suggesting biocompatibility of dextran coated LSMO nanoparticles up to these concentrations.
Assuntos
Coloides/química , Meios de Cultura/química , Hipertermia Induzida/métodos , Lantânio/química , Compostos de Manganês/química , Manganês/química , Nanopartículas/química , Óxidos/química , Polímeros/química , Estrôncio/química , Laranja de Acridina , Animais , Dextranos/química , Etídio , Células HeLa , Humanos , Concentração de Íons de Hidrogênio , Campos Magnéticos , Camundongos , Microscopia de Fluorescência , Coloração e Rotulagem , Eletricidade EstáticaRESUMO
As-prepared samples of YPO(4):2Dy nanoparticles prepared by polyol route show strong blue luminescence because of strong host contribution, whereas 500 and 900 °C annealed samples show cold and warm white luminescence, respectively because of different energy transfer rates from host to Dy(3+). Li(+) co-doping improves luminescence intensity as well as crystallinity significantly. Interestingly, Li(+) ions occupy interstitial sites of lattice. These materials will be potential candidates for white light emitting diodes and near-infrared emitting phosphors.
RESUMO
Tb(3+)-doped CaMoO(4) (Tb(3+) = 1, 3, 5, 7, 10, 15 and 20 atom%) core and core-shell nanoparticles have been prepared by urea hydrolysis in ethylene glycol (EG) as capping agent as well as reaction medium at low temperature ~150 °C. As-prepared samples were annealed at 500 and 900 °C for 4 h to eliminate unwanted hydrocarbons and/or H(2)O present in the sample and to improve crystallinity. The synthesised nanophosphors show tetragonal phase structure. The crystallite size of as-prepared sample is found to be ~18 nm. The luminescence intensity of the (5)D(4) â (7)F(5) transition at 547 nm of Tb(3+) is much higher than that of the (5)D(4) â (7)F(6) transition at 492 nm. 900 °C annealed samples show the highest luminescence intensity. The intensity ratio R (I[(5)D(4) â (7)F(6)]/I[(5)D(4) â (7)F(5)]) lies between 0.3-0.6 for as-prepared, 500 and 900 °C annealed samples. The luminescence decay of (5)D(4) level under 355 nm excitation shows biexponential behaviour indicating availability of Tb(3+) ions on surface and core regions of particle; whereas, contribution of Mo-O charge transfer to lifetime is obtained under 250 nm excitation. The CIE coordinates of as-prepared, 500 and 900 °C annealed 5 atom% Tb(3+)-doped CaMoO(4) samples under 250 nm excitation are (0.28, 0.32), (0.22, 0.28) and (0.25, 0.52), respectively. The dispersed particles in polar medium and its polymer film show green light emission. The luminescence intensity is improved significantly after core-shell formation due to extent of decrease of non-radiative rates arising from surface dangling bonds and capping agent. Quantum yields of as-prepared samples of 1, 5 and 7 atom% Tb(3+)-doped CaMoO(4) samples are found to be 10, 3 and 2, respectively.