The Bond Strength of a Universal Adhesive System with Silane to Lithium Disilicates in Comparison with an Isolated Silane Coupling Agent.

PURPOSE: The aim of this in vitro study was to evaluate the effects of different durations of silane coupling agent application compared to a universal adhesive system regarding the shear bond strength of two ceramic materials. MATERIALS AND METHODS: A total of 120 human molars were ground to the dentinal coronal third and then fixed into an acrylic resin holder. Lithium disilicate specimens were divided into two main groups according to the ceramic type: computer-aided design/computer-aided manufacturing IPS e.max CAD and heat-pressed Initial LiSi Press GC (dimensions of 4 × 3× 3 mm). Each main group was subdivided into 6 subgroups (n = 10) according to the duration of the silane and universal adhesive system application (20, 60, or 120 seconds) on the ceramic surface before cementation; then, the cementation procedures were performed. All specimens were subjected to 5000 thermal cycles at 5 and 55°C before testing. The shear bond strength was measured using a universal testing machine. ANOVA and Scheffe post hoc test multiple comparisons tests were conducted (α = 0.05). RESULTS: The shear bond strength increased as the duration of the silane and universal adhesive system application increased. The highest bond value for each material was found for the silane application at 120 seconds, with a significant difference between 120 and 60, and 20 seconds for both e. max CAD and Initial LiSi materials (p = 0.029 and p ˂ 0.001, respectively). No significant difference was found between 60 and 20 seconds when silane and universal adhesive system were applied for both e. max CAD and Initial LiSi materials (p = 0.169 and p = 0.120, respectively). All groups treated with the silane primer showed significantly higher values than the universal adhesive system for each application time (p ˂ 0.001). CONCLUSION: Increasing the duration of the silane coupling agent and universal adhesive system application to 120 seconds on the ceramic surface before cementation improved the shear bond strength of the ceramic-cement interface. Ceramic pretreatment with silane could be an essential step for bonding ceramic to dentin regardless of silane presence in the universal adhesive system.

Comparative Effect of Glass Fiber and Nano-Filler Addition on Denture Repair Strength.

PURPOSE: To evaluate and compare the effects of glass fiber (GF), Zirconium oxide nanoparticles (nano-ZrO2 ), and silicon dioxide nanoparticles (nano-SiO2 ) addition on the flexural strength and impact strength of repaired denture base material. MATERIALS AND METHODS: Heat-polymerized acrylic resin specimens were fabricated. All specimens were sectioned centrally and beveled creating 2.5 mm repair gap except for 10 controls. Specimen grouping (n = 10/group) was done according to filler concentration of 0%, 0.25%, 0.5%, and 0.75% of auto-polymerized acrylic powder. Modified resin was mixed, packed in the repair gap, polymerized, finished and polished. Three-point bending test and Charpy type impact testing were done. Data were analyzed using one-way-ANOVA and Post-Hoc Tukey test (α = 0.05). RESULTS: All additives significantly increased flexural strength and impact strength (p < 0.05). Within the modified subgroups, no significant differences were found for GF. Significant increase for nano-ZrO2 and significant decrease for nano-SiO2 as the concentration of additive increased were noted for both flexural strength and impact strength. Highest flexural strength was found with 0.75%-nano-ZrO2 (69.59 ± 2.52MPa) and the lowest was found with 0.75%-nano-SiO2 (53.82 ± 3.10MPa). The 0.25%-nano-SiO2 showed the highest impact strength value (2.54 ± 0.21 kJ/m2 ) while the lowest impact strength value was seen with 0.75%-nano-SiO2 (1.54 ± 0.17 kJ/m2 ). CONCLUSION: Nano-filler effect was concentration dependent and its addition to repair resin increased the flexural and impact strengths. The incorporation of 0.75%-ZrO2 or 0.25%-SiO2 into repair resin proved to be a promising technique to enhance repair strength and avoid repeated fractures.

A Novel Approach to Improve Repair Bond Strength of Repaired Acrylic Resin: An in Vitro Study on the Shear Bond Strength.

PURPOSE: To evaluate the combined effect of mechanical surface treatment with intermediate bonding agents (methyl methacrylate [MMA] and silane coupling agents) and ZrO2 nanoparticle (nano-ZrO2 ) addition to repair material on the shear bond strength (SBS) of repaired denture bases. MATERIALS AND METHODS: Heat-polymerized acrylic resin was used to fabricate 130 cylindrical blocks (15 mm × 10 mm) and divided into a control group without treatment (C, n = 10), and 3 repair groups (n = 40/group) divided into specimens treated with alumina blasting alone (AB), specimens blasted with alumina combined with silane coupling agent (AB + SCA), or combined with MMA-based composite bonding agent (AB + MA). Treated groups were further subdivided according to nano-ZrO2 concentrations into 0 wt%, 2.5 wt%, 5 wt%, and 7.5 wt% added to repair resin powder. Repair resin monomer and polymer were combined and packed on the repair area and then placed in a pressure pot at 37°C for 15 minutes for polymerization. Shear bond test was performed using a universal testing machine. Scanning electron microscopy (SEM) was used to examine the effect of surface modifications on repair surfaces and to evaluate the topography of fracture surfaces. Tukey-Kramer multiple-comparison test was used to detect significant differences between groups (p ≤ 0.05). RESULTS: SBS (MPa) of specimens treated with alumina blasting and application of intermediate agents were significantly higher than the control group (p < 0.05), while no significant differences were found between AB and control group (p > 0.05). Nano-ZrO2 addition significantly increased SBS except for AB, and 5%, 7.5% MA (p > 0.05). SEM evaluation showed that alumina blasting created rougher and more porous surfaces, while SCA and MA reduced the irregularities and fissures. CONCLUSION: Application of bonding agents to repair surfaces after alumina blasting improved the repair bond strength and proved to be a possible new adhesive method for denture repair. Moreover, nano-ZrO2 addition in combination with surface treatment improved the repair bond strength.

Students' Awareness of the Role of Phonetics in Construction of Removable Dental Prostheses: A Questionnaire-Based Cross-Sectional Study.

Phonetics plays a major role in the fabrication of prostheses. This study aimed to assess the knowledge of students regarding the role of phonetics in denture fabrication and to improve the educational process and the clinical application. The study was conducted at the College of Dentistry, Imam Abdulrahman Bin Faisal University, and involved a survey of 344 dental students and interns. The questionnaire contained 20 questions and was divided into three sections: general knowledge, clinical correlations, and clinical evaluations. The data were collected and analyzed statistically using independent t-tests, one-way ANOVA, and Tukey's post hoc tests. The response rate was 100%. Male and female students only differed significantly in terms of their scores for answers to general knowledge questions, with females achieving better results (p = 0.023). General knowledge varied significantly between fourth-year students and all other levels (p < 0.001), and fifth-year students and interns (p = 0.027). The clinical correlations varied significantly between fourth-year students and interns (p = 0.01), whereas the clinical evaluations varied between all the academic years and interns (fourth-year, p < 0.001; fifth-year, p = 0.003; and sixth-year, p = 0.017). The interns obtained the highest scores in all sections. There was a lack of awareness among dental students of some aspects of the role of phonetics in denture fabrication. The study highlights the deficiencies that need to be addressed and the need for adjustments to the curriculum related to removable prosthodontics in order to improve the knowledge of students regarding the role of speech in denture fabrication.

Chemo-Mechanical Approach to Improve Repair Bond Strength of Denture Teeth.

BACKGROUND: Detachment of acrylic teeth from denture base material is a common complication in dentistry which accounts for 26-30% of repair cases. This study aimed to evaluate the effect of alumina-blasting, silane coupling agent, and thermal cycling on the shear bond strength of repaired teeth to denture base. MATERIALS AND METHODS: Specimens (140) of repaired teeth to denture bases were fabricated and divided into 14 groups: 7 groups before thermal cycling and 7 groups after thermal cycling (n = 10). The groups were divided according to surface treatment into no treatment (control), treatment of the base (B), the tooth (T), or both (BT). Each group was further subdivided according to the surface treatment method into alumina-blasting or alumina-blasting and silane coupling agent. After treatment, acrylic discs and teeth were fixed in a jig, and the repair procedure was done. Half the specimens were thermally cycled. Shear bond strength was measured using a universal testing machine. ANOVA and Tukey HSD tests were performed at α = 0.05. RESULTS: Surface treatment significantly improved the bond strength compared to the control group (P < 0.001). Comparing surface treatments, alumina-blasting with silane coupling agent treatment resulted in significantly higher strength compared to alumina-blasting alone (P < 0.001). The BT group treated with alumina-blasting and silane coupling agent showed the highest significant shear bond strength (23.91 ± 0.96 MPa) (P < 0.001). Significant drop in strength value was observed in all groups after thermal cycling (P < 0.004) except the BT group treated with alumina-blasting (P=0.096). CONCLUSION: Surface treatment using alumina-blasting with silane coupling agent for denture base and tooth increased repair strength.

Effect of SiO2 Nanoparticles Addition on the Flexural Strength of Repaired Acrylic Denture Base.

OBJECTIVE: The objective of this study was to evaluate the effect of nano-SiO2 addition on the flexural strength (FS) of repaired acrylic denture base. MATERIALS AND METHODS: Heat-polymerized acrylic resin specimens were fabricated in dimensions of (65 × 10 × 2.5 ± 0.1 mm3 ) and then sectioned and prepared, creating repair gap with butt (90 degrees) and bevel (45 degrees) repair surface designs forming two main groups according to joint design. Further subdivision was done into four groups (n = 10) according to nano-SiO2 concentration: one unmodified group and three modified groups (0.25, 0.5, and 0.75 wt %) in the autopolymerized repair resin. Each pair of a specimen was assembled in a mold and repaired according to manufacturer's recommendations. STATISTICAL ANALYSIS: Three-point bending test was done to measure FS, followed by scanning electron microscope (SEM) examination for fracture surface analysis. Data were analyzed using ANOVA and Tukey's post hoc test (α = 0.05). RESULTS: The addition of nano-SiO2 significantly improved FS of repaired acrylic resin in comparison to the unmodified group (p ˂ 0.05). For butt joint, significant differences between nano-SiO2 reinforced groups were noticed (p ˂ 0.05), while reinforced beveled groups did not differ significantly (p ˃ 0.05). Bevel design remarkably increased FS compared with butt design per respective filler concentration. From the SEM images, improved FS was presented with a homogeneous distribution of nano-SiO2 within polymethyl methacrylate. CONCLUSION: Nano-SiO2 addition to repair resin and 45 degree-beveled repair surface increased FS of repaired acrylic resin.