A vitamin-C-derived DNA modification catalysed by an algal TET homologue.

Methylation of cytosine to 5-methylcytosine (5mC) is a prevalent DNA modification found in many organisms. Sequential oxidation of 5mC by ten-eleven translocation (TET) dioxygenases results in a cascade of additional epigenetic marks and promotes demethylation of DNA in mammals1,2. However, the enzymatic activity and function of TET homologues in other eukaryotes remains largely unexplored. Here we show that the green alga Chlamydomonas reinhardtii contains a 5mC-modifying enzyme (CMD1) that is a TET homologue and catalyses the conjugation of a glyceryl moiety to the methyl group of 5mC through a carbon-carbon bond, resulting in two stereoisomeric nucleobase products. The catalytic activity of CMD1 requires Fe(II) and the integrity of its binding motif His-X-Asp, which is conserved in Fe-dependent dioxygenases3. However, unlike previously described TET enzymes, which use 2-oxoglutarate as a co-substrate4, CMD1 uses L-ascorbic acid (vitamin C) as an essential co-substrate. Vitamin C donates the glyceryl moiety to 5mC with concurrent formation of glyoxylic acid and CO2. The vitamin-C-derived DNA modification is present in the genome of wild-type C. reinhardtii but at a substantially lower level in a CMD1 mutant strain. The fitness of CMD1 mutant cells during exposure to high light levels is reduced. LHCSR3, a gene that is critical for the protection of C. reinhardtii from photo-oxidative damage under high light conditions, is hypermethylated and downregulated in CMD1 mutant cells compared to wild-type cells, causing a reduced capacity for photoprotective non-photochemical quenching. Our study thus identifies a eukaryotic DNA base modification that is catalysed by a divergent TET homologue and unexpectedly derived from vitamin C, and describes its role as a potential epigenetic mark that may counteract DNA methylation in the regulation of photosynthesis.

Experimental Observation of the Fully Ferroelectric-Fully Ferroelastic Effect in Multiferroic Hybrid Perovskites.

Since the concept of "multiferroic" was first proposed in 1968, the coupling effect between different ferroic orders has attracted great interest in energy, information, and biomedical fields. However, the fully ferroelectric-fully ferroelastic effect has never been experimentally observed in hybrid perovskites, even though this effect was predicted to exist half a century ago. Realizing such cross-linking effects of polarization vectors and strain tensors has always been a huge challenge because of the complex difference in these two ferroic origins. Here, we report a multiferroic with full ferroelectricity and full ferroelasticity in two-dimensional (2D) hybrid perovskites based on ferroelectrochemistry. The dynamic molecular reorientations endow (cyclohexanemethylaminium)2PbCl4 with a desired symmetry change of 4̅2mFmm2 at a Curie temperature of 411.8 K. More strikingly, the switchable evolution of ferroelastic domains was directly observed under the control of either electric or mechanical fields, which is the first experimental observation of a fully ferroelectric-fully ferroelastic effect in hybrid perovskites. This work would provide new insights into understanding the intrinsic cross-linking mechanism between ferroelectricity and ferroelasticity toward the development of multichannel interactive microelectronic devices.

Organic-Inorganic Rare-Earth Double Perovskite Ferroelectric with Large Piezoelectric Response and Ferroelasticity for Flexible Composite Energy Harvesters.

Hybrid organic-inorganic perovskite (HOIP) ferroelectric materials have great potential for developing self-powered electronic transducers owing to their impressive piezoelectric performance, structural tunability and low processing temperatures. Nevertheless, their inherent brittle and low elastic moduli limit their application in electromechanical conversion. Integration of HOIP ferroelectrics and soft polymers is a promising solution. In this work, a hybrid organic-inorganic rare-earth double perovskite ferroelectric, [RM3HQ]2RbPr(NO3)6 (RM3HQ = (R)-N-methyl-3-hydroxylquinuclidinium) is presented, which possesses multiaxial nature, ferroelasticity and satisfactory piezoelectric properties, including piezoelectric charge coefficient (d33) of 102.3 pC N-1 and piezoelectric voltage coefficient (g33) of 680 × 10-3 V m N-1. The piezoelectric generators (PEG) based on composite films of [RM3HQ]2RbPr(NO3)6@polyurethane (PU) can generate an open-circuit voltage (Voc) of 30 V and short-circuit current (Isc) of 18 µA, representing one of the state-of-the-art PEGs to date. This work has promoted the exploration of new HOIP ferroelectrics and their development of applications in electromechanical conversion devices.

Non-iridium-based electrocatalyst for durable acidic oxygen evolution reaction in proton exchange membrane water electrolysis.

Iridium-based electrocatalysts remain the only practical anode catalysts for proton exchange membrane (PEM) water electrolysis, due to their excellent stability under acidic oxygen evolution reaction (OER), but are greatly limited by their high cost and low reserves. Here, we report a nickel-stabilized, ruthenium dioxide (Ni-RuO2) catalyst, a promising alternative to iridium, with high activity and durability in acidic OER for PEM water electrolysis. While pristine RuO2 showed poor acidic OER stability and degraded within a short period of continuous operation, the incorporation of Ni greatly stabilized the RuO2 lattice and extended its durability by more than one order of magnitude. When applied to the anode of a PEM water electrolyser, our Ni-RuO2 catalyst demonstrated >1,000 h stability under a water-splitting current of 200 mA cm-2, suggesting potential for practical applications. Density functional theory studies, coupled with operando differential electrochemical mass spectroscopy analysis, confirmed the adsorbate-evolving mechanism on Ni-RuO2, as well as the critical role of Ni dopants in stabilization of surface Ru and subsurface oxygen for improved OER durability.

Characterization of an autonomous pathway complex that promotes flowering in Arabidopsis.

Although previous studies have identified several autonomous pathway components that are required for the promotion of flowering, little is known about how these components cooperate. Here, we identified an autonomous pathway complex (AuPC) containing both known components (FLD, LD and SDG26) and previously unknown components (EFL2, EFL4 and APRF1). Loss-of-function mutations of all of these components result in increased FLC expression and delayed flowering. The delayed-flowering phenotype is independent of photoperiod and can be overcome by vernalization, confirming that the complex specifically functions in the autonomous pathway. Chromatin immunoprecipitation combined with sequencing indicated that, in the AuPC mutants, the histone modifications (H3Ac, H3K4me3 and H3K36me3) associated with transcriptional activation are increased, and the histone modification (H3K27me3) associated with transcriptional repression is reduced, suggesting that the AuPC suppresses FLC expression at least partially by regulating these histone modifications. Moreover, we found that the AuPC component SDG26 associates with FLC chromatin via a previously uncharacterized DNA-binding domain and regulates FLC expression and flowering time independently of its histone methyltransferase activity. Together, these results provide a framework for understanding the molecular mechanism by which the autonomous pathway regulates flowering time.

Chlorogenic acid alleviates renal fibrosis by reducing lipid accumulation in diabetic kidney disease through suppressing the Notch1 and Stat3 signaling pathway.

AIMS: Abnormal renal lipid metabolism causes renal lipid deposition, which leads to the development of renal fibrosis in diabetic kidney disease (DKD). The aim of this study was to investigate the effect and mechanism of chlorogenic acid (CA) on reducing renal lipid accumulation and improving DKD renal fibrosis. METHODS: This study evaluated the effects of CA on renal fibrosis, lipid deposition and lipid metabolism by constructing in vitro and in vivo models of DKD, and detected the improvement of Notch1 and Stat3 signaling pathways. Molecular docking was used to predict the binding between CA and the extracellular domain NRR1 of Notch1 protein. RESULTS: In vitro studies have shown that CA decreased the expression of Fibronectin, α-smooth muscle actin (α-SMA), p-smad3/smad3, alleviated lipid deposition, promoted the expression of carnitine palmitoyl transferase 1 A (CPT1A), and inhibited the expression of cholesterol regulatory element binding protein 1c (SREBP1c). The expression of Notch1, Cleaved Notch1, Hes1, and p-stat3/stat3 were inhibited. These results suggested that CA might reduce intercellular lipid deposition in human kidney cells (HK2) by inhibiting Notch1 and stat3 signaling pathways, thereby improving fibrosis. Further, in vivo studies demonstrated that CA improved renal fibrosis and renal lipid deposition in DKD mice by inhibiting Notch1 and stat3 signaling pathways. Finally, molecular docking experiments showed that the binding energy of CA and NRR1 was -6.6 kcal/mol, which preliminarily predicted the possible action of CA on Notch1 extracellular domain NRR1. CONCLUSION: CA reduces renal lipid accumulation and improves DKD renal fibrosis by inhibiting Notch1 and stat3 signaling pathways.

High-Strength Carbon Nanotube Fibers from Purity Control by Atomized Catalytic Pyrolysis and Alignment Improvement by Continuous Large Prestraining.

Transferring the high strength of individual carbon nanotubes (CNTs) to macroscopic fibers is still a major technical challenge. In this study, CNT fibers are wound from a hollow cylindrical assembly. In particular, atomized catalytic pyrolysis is utilized to produce the fiber and control its purity. The pristine fiber is then continuously prestrained to have a highly aligned structure for subsequent full densification. Experimental measurements show that the final fiber possesses a high tensile strength (8.0 GPa), specific strength (5.54 N tex-1 (tex: the weight (g) of a fiber of 1 km long)), Young's modulus (350 GPa), and elongation at break (4%). Such an excellent combination is superior to that of any other existing fiber and attributed to the efficient stress transfer among the highly aligned and packed CNTs. Our study provides a new strategy involving atomized catalysis for developing superstrong CNT assemblies such as fibers and films for practical applications.

Sirtuin 3 ameliorates inflammatory bowel disease via inhibiting intestinal inflammation and oxidative stress.

Sirtuin 3 involved in development of various diseases, but its role in inflammatory bowel disease is still unknown. We used inflammatory bowel disease biopsies, colitis animal model, and vitro cells RAW264.7 to study the role of Sirtuin 3 in the pathophysiology of inflammatory bowel disease. Sirtuin 3 negatively correlated with intestinal TNF-α. Sirt3 was less pronounced in pediatric and adult inflammatory bowel disease patients compared with corresponding control group. Sirtuin 3 activator Honokiol suppressed dextran sulfate sodium induced colonic manifestations, while Sirt3 inhibitor caused opposite results. Honokiol inhibited colonic oxidative stress by and reduced intestinal permeability. Honokiol repressed inflammatory response by reducing macrophage infiltration, pro-inflammatory cytokines TNF-α, IL-1ß, and IL-6 levels, and inhibiting activation of NF-κB p65 in the colitis mice. However, Sirt3 inhibitor amplified colonic oxidative stress and inflammatory response. In vitro study, Sirt3 inhibitor or siRNA Sirtuin 3 activated NF-κB p65 and enhanced TNF-α, IL-1ß, and IL-6 secretion from LPS stimulated RAW264.7, while Honokiol remarkably attenuated these pro-inflammatory cytokines secretion. Finally, knockdown of Sirt3 in Caco-2 cells enhanced TNF-α induced intestinal barrier integrity injury. Sirtuin 3 negatively regulates inflammatory bowel disease progression via reducing colonic inflammation and oxidative stress. Sirtuin 3 is a promising therapeutic target in clinical application for inflammatory bowel disease therapy.

Unusual Thermal Quenching of Photoluminescence from an Organic-Inorganic Hybrid [MnBr4 ]2- -based Halide Mediated by Crystalline-Crystalline Phase Transition.

The ability to generate and manipulate photoluminescence (PL) behavior has been of primary importance for applications in information security. Excavating novel optical effects to create more possibilities for information encoding has become a continuous challenge. Herein, we present an unprecedented PL temporary quenching that highly couples with thermodynamic phase transition in a hybrid crystal (DMML)2 MnBr4 (DMML=N,N-dimethylmorpholinium). Such unusual PL behavior originates from the anomalous variation of [MnBr4 ]2- tetrahedrons that leads to non-radiation recombination near the phase transition temperature of 340 K. Remarkably, the suitable detectable temperature, narrow response window, high sensitivity, and good cyclability of this PL temporary quenching will endow encryption applications with high concealment, operational flexibility, durability, and commercial popularization. Profited from these attributes, a fire-new optical encryption model is devised to demonstrate high confidential information security. This unprecedented optical effect would provide new insights and paradigms for the development of luminescent materials to enlighten future information encryption.

Organic-Inorganic Hybrid Ferroelectric and Antiferroelectric with Afterglow Emission.

Luminescent ferroelectrics are holding exciting prospect for integrated photoelectronic devices due to potential light-polarization interactions at electron scale. Integrating ferroelectricity and long-lived afterglow emission in a single material would offer new possibilities for fundamental research and applications, however, related reports have been a blank to date. For the first time, we here achieved the combination of notable ferroelectricity and afterglow emission in an organic-inorganic hybrid material. Remarkably, the presented (4-methylpiperidium)CdCl3 also shows noticeable antiferroelectric behavior. The implementation of cationic customization and halogen engineering not only enables a dramatic enhancement of Curie temperature of 114.4 K but also brings a record longest emission lifetime up to 117.11 ms under ambient conditions, realizing a leapfrog improvement of at least two orders of magnitude compared to reported hybrid ferroelectrics so far. This finding would herald the emergence of novel application potential, such as multi-level density data storage or multifunctional sensors, towards the future integrated optoelectronic devices with multitasking capabilities.

Introducing Ferroelasticity into 1D Hybrid Lead Halide Semiconductor by Halogen Substitution Strategy.

Organic-inorganic hybrid lead halide perovskites (OLHPs), represented by (CH3 NH3 )PbI3 , are one of the research focus due to their exceptional performance in optoelectronic applications, and ferroelastic domain walls are benign to their charge carrier transport that is confirmed recently. Among them, the 1D OLHPs feature better stability against desorption and moisture, but related 1D ones possessing ferroelasticity are rarely investigated and reported so far. In this work, the 1D ferroelastic semiconductor (N-iodomethyl-N-methyl-morpholinium)PbI3 ((IDMML)PbI3 ) is prepared successfully by introducing successively halogenate atoms from Cl, Br to I into the organic cation of the prototype (N,N-dimethylmorpholinium)PbI3 ((DMML)PbI3 ). Notably, (IDMML)PbI3 shows the narrow bandgap energy (≈2.34 eV) according to the ultraviolet-visible absorption spectrum and the theoretical calculation, and possesses the evident photoconductive characteristic with the on/off ratio of current of ≈50 under the 405 nm light irradiation. This work provides a new case for the ferroelastic OLHPs and will inspire intriguing research in the field of optoelectronic.

Fluorescence Emission Is Highly Structure-Dependent in Hybrid Lead Halides.

Hybrid lead halide perovskites have received extensive scientific attention owing to their great potential in the field of fluorescent displays and light-emitting diodes. Currently, most luminescent materials contain functional molecular and rare-earth metal ion parts. However, the mechanism of photoluminescence property in two-dimensional hybrid lead halide perovskites with different layered inorganic skeletons has been reported rarely. To better understand the effect of an inorganic skeleton on the fluorescence property, here, we report three organic-inorganic hybrid materials with different layered inorganic frameworks: (MACH)2·PbBr4 (Prv-1, MACH = cyclohexylmethylammonium), (2-MPQ)·PbBr4 (Prv-2, 2-MPQ = 2-methylpiperazinium), and (TMBA)4·Pb3Br10 (Prv-3, TMBA = N'N'N'-trimethylbenzylammonium). Among them, Prv-1 is a (100)-oriented perovskite, Prv-2 belongs to the (110)-oriented perovskite, and the inorganic framework of Prv-3 possesses [Pb3Br10] units. Interestingly, Prv-1 has a strong blue-violet fluorescence emission, while the luminescence effect of Prv-2 is very weak; notably, Prv-3 emits a charming bright-orange light. Meanwhile, results of theoretical computational studies also reveal that the electronic structure of all three compounds is highly dependent on structurally distorted [PbBr6] octahedra, and the frontier molecular orbital (FMO) analysis further suggests that HOMO and LUMO of Prv-3 are contributed by inorganic and organic components, respectively. In addition, all three materials belong to direct band gap semiconductors, and the band gaps are 2.79, 2.97, and 2.76 eV, respectively. Significantly, there are obvious differences in conduction bands. Based on the above analysis, the photoluminescence mechanism of three hybrid materials is explained from the electronic levels. Consequentially, this work might provide practical strategies and perspectives for exploring novel structure-related properties.

Precise Design of Molecular Ferroelectrics with High TC and Tunable Band Gap by Molecular Modification.

Molecular ferroelectric materials are widely applied in piezoelectric converters, non-volatile memorizers, and photovoltaic devices due to their advantages of adjustable structure, lightweight, easy processing, and environmental friendliness. However, designing multifunctional molecular ferroelectrics with excellent properties has always been a great challenge. Herein, a multiaxial molecular ferroelectric is successfully designed by modifying the quasi-spherical cation dabco with CuBr2 to obtain halogenated [Bretdabco]CuBr4 (Bretdabco = N-bromoethyl-N'-diazabicyclo [2.2.2]octane), which crystallizes in polar point groups (C6). Typical ferroelectric behaviors featured by the P-E hysteresis loop and switched ferroelectric domain are exhibited. Notably, the molecular ferroelectric shows a high TC of 460 K, which is rare in the field and could greatly expand the application range of this material. In addition, the band gap is adjustable through the regulation of halogen. Both the UV absorption spectra and theoretical calculations indicate that the molecular ferroelectrics belong to a direct band gap (2.14 eV) semiconductor. This tunable and narrow band gap semiconductor molecular ferroelectric material with high TC can be utilized more effectively in the study of optoelectronics and sensors, including piezoelectric energy harvesters. This research may provide a promising approach for the development of multiaxial molecular ferroelectrics with a tiny band gap and high TC.

Alloying Matters for Ordering: Synthesis of Highly Ordered PtCo Intermetallic Catalysts for Fuel Cells.

Porous carbon-supported atomically ordered intermetallic compounds (IMCs) are promising electrocatalysts in boosting oxygen reduction reaction (ORR) for fuel cell applications. However, the formation mechanism of IMC structures under high temperatures is poorly understood, which hampers the synthesis of highly ordered IMC catalysts with promoted ORR performance. Here, we employ high-temperature X-ray diffraction and energy-dispersive spectroscopic elemental mapping techniques to study the formation process of IMCs, by taking PtCo for example, in an industry-relevant impregnation synthesis. We find that high-temperature annealing is crucial in promoting the formation of alloy particles with a stoichiometric Co/Pt ratio, which in turn is the precondition for transforming the disordered alloys to ordered intermetallic structures at a relatively low temperature. Based on the findings, we accordingly synthesize highly ordered L10-type PtCo catalysts with a remarkable ORR performance in fuel cells.

Phase stability and electronic structure of CsPbCl3 under hydrostatic stress and anion substitution.

Perovskites based on CsPbX3 (X = Cl, Br, I) have promising applications in solar cells, light-emitting diodes, and photodetectors. In this paper, the phase stability of inorganic metal halide perovskite CsPbCl3 under hydrostatic pressure and anion substitution is studied using density functional theory (DFT), and this modification is explained by the interaction of the octahedrons and transformation of the bond-orbital coupling. In addition, two space groups, P4/mbm and Amm2, which are stable under stress, are subjected to anion substitution; then, the structural stability and band gap change of CsPbCl3-yXy (X = Br, I; y = 0, 1, 2, 3) are analyzed after applying stress; finally, the electronic structures and optical properties of the six most stable components are presented. The effect of stress and anions on the components' optoelectronic properties is closely linked with the crystal's structural alteration mechanism. These results show that stress and anion modulation can significantly change the optoelectronic properties of materials, which make these materials have broad application prospects. Furthermore, stress can be used as an effective tool for screening the most stable material structure.

Genome-wide association study identified the candidate genes associated with angel wing trait in Pekin duck.

Angel wing is a developmental wing deformity that can influence breeding and reproduction in the commercial duck industry. The nutrition foundation of angel wing trait was initially explored, but the genetic basic remains poorly understood. In this study, we identified candidate genes and single-nucleotide polymorphisms (SNPs) associated with angel wing trait in Pekin ducks using a genome-wide association study (GWAS) and selective sweep analysis. The GWAS results showed that nine SNPs across five chromosomes were significantly correlated with the angel wing trait. In total, 468 selection signals were shown between the angel wing ducks and normal ducks, and these signals harbored 154 genes, which were enriched in the nervous system and metabolism. This study provides the new insights into the genetic factors that may influence duck angel wing.

Prenyl Transferases Regulate Secretory Protein Sorting and Parasite Morphology in Toxoplasma gondii.

Protein prenylation is an important protein modification that is responsible for diverse physiological activities in eukaryotic cells. This modification is generally catalyzed by three types of prenyl transferases, which include farnesyl transferase (FT), geranylgeranyl transferase (GGT-1) and Rab geranylgeranyl transferase (GGT-2). Studies in malaria parasites showed that these parasites contain prenylated proteins, which are proposed to play multiple functions in parasites. However, the prenyl transferases have not been functionally characterized in parasites of subphylum Apicomplexa. Here, we functionally dissected functions of three of the prenyl transferases in the Apicomplexa model organism Toxoplasma gondii (T. gondii) using a plant auxin-inducible degron system. The homologous genes of the beta subunit of FT, GGT-1 and GGT-2 were endogenously tagged with AID at the C-terminus in the TIR1 parental line using a CRISPR-Cas9 approach. Upon depletion of these prenyl transferases, GGT-1 and GGT-2 had a strong defect on parasite replication. Fluorescent assay using diverse protein markers showed that the protein markers ROP5 and GRA7 were diffused in the parasites depleted with GGT-1 and GGT-2, while the mitochondrion was strongly affected in parasites depleted with GGT-1. Importantly, depletion of GGT-2 caused the stronger defect to the sorting of rhoptry protein and the parasite morphology. Furthermore, parasite motility was observed to be affected in parasites depleted with GGT-2. Taken together, this study functionally characterized the prenyl transferases, which contributed to an overall understanding of protein prenylation in T. gondii and potentially in other related parasites.

DIA-MS Based Proteomics Combined with RNA-Seq Data to Unveil the Mitochondrial Dysfunction in Human Glioblastoma.

Mitochondrial dysfunctions underlie the pathogenesis in glioblastoma multiforme (GBM). Comprehensive proteomic profiling of mitochondria-specific changes in human GBM is still insufficient. This study carried out a DIA-MS based proteomic analysis on the mitochondria isolated from human primary GBM and peritumoral tissue (as paired control), and further compared those findings with the transcriptomic datasets. A total of 538 mitochondrion-specific proteins were rigorously confirmed, among which 190 differentially expressed proteins were identified. Co-regulations of the mitochondrial dysfunction pathway networks were observed, including significant up-regulations of mitochondrial translation and apoptosis, as well as down-regulations of OXPHOS and mitochondrial dynamics. Proteins related to FA, AA metabolism and ROS also showed significant variations. Most of these alterations were consistent in trend when compared the proteomics findings with the RNA-Seq datasets, while the changes at protein levels appeared to be more dramatic. Potentially key proteins in GBM were identified, including up-regulated pro-apoptotic protein CASP3, BAX, fatty acid oxidation enzymes CPT1A, CPT2, ACADM, serine-glycine enzymes SHMT2, GATM, ROS-related protein SOD2, GPX1, and CAT; and down-regulated dynamin-related protein MFN1, MFN2, OPA1, and OXPHOS components; and also several differentially expressed ALDH isoforms. This study systematically profiled the mitochondrial dysfunctions by combining proteomic findings and mRNA datasets, which would be a valuable resource to the community for further thorough analyses.

Exploration and Practice of the "One Combination, Two Highlights, Three Combinations, Four in One" Innovative Talents Training Mode in Forensic Medicine.

Talent is one of the basic and strategic supports for building a modern socialist country in all aspects. Since the 1980s, the establishment of forensic medicine major and the cultivation of innovative talents in forensic medicine have become hot topics in higher education in forensic medicine. Over the past 43 years, the forensic medicine team of Shanxi Medical University has adhered to the joint education of public security and colleges, and made collaborative innovation, forming a training mode of "One Combination, Two Highlights, Three Combinations, Four in One" for innovative talents in forensic medicine. It has carried out "5+3/X" integrated reform, and formed a relatively complete talent training innovation mode and management system in teaching, scientific research, identification, major, discipline, team, platform and cultural construction. It has made a historic contribution to China's higher forensic education, accumulated valuable experience for the construction of first-class major and first-class discipline of forensic medicine, and provided strong support for the construction of the national new forensic talent training system. The popularization of this training mode is conducive to the rapid and sustainable development of forensic science, and provides more excellent forensic talents for national building, regional social development and the discipline construction of forensic science.

Strong Metal-Support Interactions through Sulfur-Anchoring of Metal Catalysts on Carbon Supports.

In supported metal catalysts, the supports would strongly interact with the metal components instead of just acting as a carrier, which greatly affects both of their synthesis and catalytic activity, selectivity, and stability. Carbon is considered as very important but inert support and thus hard to induce strong metal-support interaction (SMSI). This mini-review highlights that sulfur-a documented poison reagent for metal catalysts-when doped in a carbon supports can induce diverse SMSI phenomenon, including electronic metal-support interaction (EMSI), classic SMSI, and reactive metal-support interaction (RMSI). These SMSI between metal and sulfur-doped carbon (S-C) supports enables the catalysts with extraordinary resistance to sintering at high temperatures of up to 1100 °C, which allows the general synthesis of single-atom, alloy cluster, and intermetallic compound catalysts with high dispersion and metal loading for a variety of applications.