In Situ Electrochemical Synthesis and Deposition of Discotic Hexa-peri-hexabenzocoronene Molecules on Electrodes: Self-Assembled Structure, Redox Properties, and Application for Supercapacitor.

Discotic hexa-peri-hexabenzocoronene (HBC) molecules are synthesized by electrochemical cyclodehydrogenation reaction and in situ self-assembled to π-electronic, discrete nanofibular objects with an average diameter about 70 nm, which are deposited directly onto the electrode. The nanofibers consist of columnar arrays of the π-stacked HBC molecules and the intercolumnar distance is determined to be 1.19 nm by X-ray diffraction, which corresponds well to the distance of 1.1 nm observed by high-resolution transmitting electron microscopy. The diameter of the molecular columns matches the size of the discotic HBC molecule indicating face-to-face π-stacking of HBC units in the column. The HBC nanofibers on electrode are redox active, and the nanosized columnar structures provide a huge surface area, which is a great benefit for the charging/discharging process, delivering excellent capacitance of 155 F g(-1) . The described electrochemical deposition method shows great advantage for self-assembling the family of insoluble and structurally designable graphene-like nano materials, which constitutes an important step toward molecular electronics.

π-Conjugated Microporous Polymer Films: Designed Synthesis, Conducting Properties, and Photoenergy Conversions.

Conjugated microporous polymers are a unique class of polymers that combine extended π-conjugation with inherent porosity. However, these polymers are synthesized through solution-phase reactions to yield insoluble and unprocessable solids, which preclude not only the evaluation of their conducting properties but also the fabrication of thin films for device implementation. Here, we report a strategy for the synthesis of thin films of π-conjugated microporous polymers by designing thiophene-based electropolymerization at the solution-electrode interface. High-quality films are prepared on a large area of various electrodes, the film thickness is controllable, and the films are used for device fabrication. These films are outstanding hole conductors and, upon incorporation of fullerenes into the pores, function as highly efficient photoactive layers for energy conversions. Our film strategy may boost the applications in photocatalysis, energy storage, and optoelectronics.

Poly(thieno[3,4-b]-1,4-oxathiane): medium effect on electropolymerization and electrochromic performance.

The asymmetrical sulfur analog of 3,4-ethylenedioxythiophene (EDOT), thieno[3,4-b]-1,4-oxathiane (EOTT), was synthesized, and its electropolymerization was comparatively investigated by employing different solvent-electrolyte systems (room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF6), CH2Cl2-Bu4NPF6, and CH2Cl2-BmimPF6). Further, the effect of solvents and supporting electrolytes on the structure, morphology, electrochemical, electronic, and optical properties and electrochromic performance of the obtained poly(thieno[3,4-b]-1,4-oxathiane) (PEOTT) films were minutely studied. PEOTT film with a band gap (Eg) of about 1.6 eV could be facilely electrodeposited in all the solvent-electrolytes and displayed excellent electroactivity, outstanding redox stability in a wide potential window, and improved thermal stability. Cyclic voltammetry showed that EOTT could be electropolymerized at a lower oxidation potential in BmimPF6 (∼1.0 V vs Ag/AgCl) due to several advantanges of RTIL BmimPF6 itself, such as high intrinsic conductivity and mild chemical conditions, etc., and the resulting PEOTT film exhibited compact morphology with better electroactivity and stability and higher electrical conductivity. On the other hand, PEOTT films from all the sovent-electrolytes also showed the electrochromic nature by color changing from gray blue to green, and further kinetic studies revealed that PEOTT had decent contrast ratios (36%), higher coloration efficiencies (212 cm(2)/C in BmimPF6), low switching voltages, moderate response time (1.2 s), excellent stability, and color persistence. From these results, PEOTT provides more plentiful electrochromic colors and holds promise for display applications.

MXene-Stabilized VS2 Nanostructures for High-Performance Aqueous Zinc Ion Storage.

Aqueous zinc-ion batteries (AZIBs) based on vanadium oxides or sulfides are promising candidates for large-scale rechargeable energy storage due to their ease of fabrication, low cost, and high safety. However, the commercial application of vanadium-based electrode materials has been hindered by challenging problems such as poor cyclability and low-rate performance. To this regard, sophisticated nanostructure engineering technology is used to adeptly incorporate VS2 nanosheets into the MXene interlayers to create a stable 2D heterogeneous layered structure. The MXene nanosheets exhibit stable interactions with VS2 nanosheets, while intercalation between nanosheets effectively increases the interlayer spacing, further enhancing their stability in AZIBs. Benefiting from the heterogeneous layered structure with high conductivity, excellent electron/ion transport, and abundant reactive sites, the free-standing VS2/Ti3C2Tz composite film can be used as both the cathode and the anode of AZIBs. Specifically, the VS2/Ti3C2Tz cathode presents a high specific capacity of 285 mAh g-1 at 0.2 A g-1. Furthermore, the flexible Zn-metal free in-plane VS2/Ti3C2Tz//MnO2/CNT AZIBs deliver high operation voltage (2.0 V) and impressive long-term cycling stability (with a capacity retention of 97% after 5000 cycles) which outperforms almost all reported Vanadium-based electrodes for AZIBs. The effective modulation of the material structure through nanocomposite engineering effectively enhances the stability of VS2, which shows great potential in Zn2+ storage. This work will hasten and stimulate further development of such composite material in the direction of energy storage.

Efficient Charge Transport Enables High Efficiency in Dilute Donor Organic Solar Cells.

The donor/acceptor weight ratio is crucial for photovoltaic performance of organic solar cells (OSCs). Here, we systematically investigate the photovoltaic behaviors of PM6:Y6 solar cells with different stoichiometries. It is found that the photovoltaic performance is tolerant to PM6 contents ranging from 10 to 60 wt %. Especially an impressive efficiency over 10% has been achieved in dilute donor solar cells with 10 wt % PM6 enabled by efficient charge generation, electron/hole transport, slow charge recombination, and field-insensitive extraction. This raises the question about the origin of efficient hole transport in such dilute donor structure. By investigating hole mobilities of PM6 diluted in Y6 and insulators, we find that effective hole transport pathway is mainly through PM6 phase in PM6:Y6 blends despite with low PM6 content. The results indicate that a low fraction of polymer donors combines with near-infrared nonfullerene acceptors could achieve high photovoltaic performance, which might be a candidate for semitransparent windows.

High Thermoelectric Performance in n-Type Perylene Bisimide Induced by the Soret Effect.

Low-cost, non-toxic, abundant organic thermoelectric materials are currently under investigation for use as potential alternatives for the production of electricity from waste heat. While organic conductors reach electrical conductivities as high as their inorganic counterparts, they suffer from an overall low thermoelectric figure of merit (ZT) due to their small Seebeck coefficient. Moreover, the lack of efficient n-type organic materials still represents a major challenge when trying to fabricate efficient organic thermoelectric modules. Here, a novel strategy is proposed both to increase the Seebeck coefficient and achieve the highest thermoelectric efficiency for n-type organic thermoelectrics to date. An organic mixed ion-electron n-type conductor based on highly crystalline and reduced perylene bisimide is developed. Quasi-frozen ionic carriers yield a large ionic Seebeck coefficient of -3021 µV K-1 , while the electronic carriers dominate the electrical conductivity which is as high as 0.18 S cm-1 at 60% relative humidity. The overall power factor is remarkably high (165 µW m-1 K-2 ), with a ZT = 0.23 at room temperature. The resulting single leg thermoelectric generators display a high quasi-constant power output. This work paves the way for the design and development of efficient organic thermoelectrics by the rational control of the mobility of the electronic and ionic carriers.

In situ synthesis of electroactive conjugated microporous fullerene films capable of supercapacitive energy storage.

We describe a general strategy for synthesizing conjugated microporous fullerene thin films via a high-throughput, efficient and controllable thiophene-based electropolymerization. By virtue of the ambipolar redox charge/discharge of the films, we showed the microporous fullerene films as outstanding pseudocapacitor materials with high capacity and wide potential windows.

A perylene bisimide network for high-performance n-type electrochromism.

A micro-porous network thin film of core-tetrachlorinated perylene bisimide (PBI) was deposited by electrochemical polymerization, which showed reversible n-doping/dedoping processes at rather low potentials, accompanied by color changes from an orange red (neutral) state to a transparent (radical anion) state and further to an aquamarine (dianion) state. The film possesses preferable coloration efficiency and cycling stability (>10 000 cycles).

Perylene Bisimide as a Promising Zinc Oxide Surface Modifier: Enhanced Interfacial Combination for Highly Efficient Inverted Polymer Solar Cells.

We report the application of a perylene bisimide (PBI-H) as zinc oxide (ZnO) surface modifier to afford an organic-inorganic co-interlayer for highly efficient inverted organic photovoltaics (i-OPV). By thermal annealing, a N-Zn chemical bond formed between PBI-H and ZnO, inducing close organic-inorganic combination. In addition, this co-interlayer shows decreased work function and increased electron transportation and conductivity, which are benefits for the cathode to enhance charge extraction efficiency and decrease recombination losses. As a result a highly efficient i-OPV was achieved with a power conversion efficiency (PCE) of 9.43% based on this co-interlayer with PTB7:PC71BM as the active layer, which shows over 35% enhancement compared to that of the device without the PBI-H layer. Moreover, this co-interlayer was widely applicable for i-OPVs based on various material systems, such as P3HT:PC61BM and PTB7-Th:PC71BM, resulting in PCE as high as 4.78% and 10.31%, respectively.