RESUMO
Thehighly efficient utilization of lignin is of great importance for the development of the biorefinery industry. Herein, a novel "core-shell" lignin nanoparticle (LNP) with a diameter of around 135 nm was prepared, after the lignin was isolated from the effluent of formic acid fractionation via dialysis. In an attempt to endow composite materials with vital functionalities, the LNP was added to the starch film and the starch/polyvinyl alcohol (PVA) or starch/polyethylene oxide (PEO) composite film. The results showed that the hydrophobicity performance of the synthesized films was enhanced significantly. Specifically, the dynamic water contact angle value of the starch/PVA composite film with 1% (wt) addition of LNPs could be maintained as high as 122° for 180 s; the starch/PEO composite film also achieved an excellent water contact angle above 120°. The addition of LNPs promoted the formation of some rough structures on the film surface, as shown by the scanning electron microscopy images, which could repel the water molecules efficiently and are closely related to the enhanced hydrophobicity of the starch film. What is more, the as-prepared LNP conferred strengthened thermal stability and ultraviolet blocking properties on the starch composite film. The structural combination of the polymer film with LNPs holds the promise for providing advanced functionalities to the composite material with wide applications.
Assuntos
Lignina , Nanopartículas , Interações Hidrofóbicas e Hidrofílicas , Lignina/química , Nanopartículas/química , Álcool de Polivinil/química , Amido/química , Resistência à Tração , Água/químicaRESUMO
Biografting is a promising and ecofriendly approach to meet various application requirements of products. Herein, a popular green enzyme, laccase, was adopted to graft a hydrophobic phenolic compound (lauryl gallate, LG) onto chitosan (CTS). The resultant chitosan derivate (Lac/LG-CTS) was systematically analyzed by Fourier transform infrared (FTIR), grafting efficiency, scanning probe microscopy (SPM), and X-ray diffraction (XRD). This grafting technique produced a multifunctional chitosan copolymer with remarkably enhanced antioxidant property, hydrophobicity, and moisture barrier property. Furthermore, the swelling capacity and acid solubility of the copolymer film decreased significantly, although the tensile strength and elongation were slightly weakened as compared to those of native chitosan. These results suggest that the Lac/LG-CTS holds great potential as a food-packaging material, preservative agent, or edible coating material.
Assuntos
Quitosana , Antioxidantes , Catálise , Ácido Gálico/análogos & derivados , Interações Hidrofóbicas e Hidrofílicas , LacaseRESUMO
In this study, the base film (CSL) was prepared by blending tunicate cellulose nanocrystals (TCNCs) extracted from tunicate shells, with sodium alginate (SA) and alkali lignin (AL). Then, the mulching film (CSL-WK) was prepared using water-borne polyurethane (WPU) as binder to install low-energy Kaolin on the surface of CSL film. The influences of composition with different concentrations on mechanical properties were studied. The tensile strength and elongation at break of CSL-WK film could reach 86.58 MPa and 50.49 %, respectively. The mulching films were characterized by degradability test, SEM, FTIR, and TGA. TCNCs had good compatibility with SA and AL, and a rough structure was formed on the surface of the film to improve the hydrophobicity. The barrier properties, including ultraviolet resistance, water contact angle, water vapor permeability, water retention, and flame retardancy, were tested. The results showed that CSL-WK films could block 97 % of ultraviolet light, reduce about 25 % of soil water loss, and self-extinguish within 7 s of open flame ignition. Note that the secondary spraying method significantly improved the barrier property of films. This study lays a foundation for the preparation of ecologically friendly, biodegradable, and high barrier mulching film, and expands the application of marine resources.
Assuntos
Nanopartículas , Urocordados , Animais , Lignina , Celulose/química , Alginatos/química , Álcalis , Nanopartículas/químicaRESUMO
In recent years, researchers have put much attention on the improvements and upgrades of novel wet strength agent in the papermaking fields, especially in the usage of household paper. Herein, PEIM-KH560 by polyethyleneimine (PEI) and γ-glycidyl ether propyl trimethoxysilane (KH560) was synthesized with five molecular weights (Mw) of PEI at 600, 1800, 10,000, 70,000 and 750,000. Results showed that the molecular weight greatly influenced the physicochemical properties of PEI-KH560, such as the size and thermal stability. The intrinsic cationic charge of PEI-KH560 provided the bonding sites with the paper fibers, forming strengthened fiber-fiber joints. It was shown that the dry, wet strength and hydrophobicity of cellulosic paper sheets were obviously improved. When the m (PEI):m(KH560) is 1:2, the strength of papers after sizing by Mw of PEI at 600 and 1800 is the most obvious, with the dry strength increased by 227.9 % and 187.5 %, and the wet strength increased by 183.8 % and 207.8 %, respectively. The maximum hydrophobicity was found at the PEI1800-KH560 with the contact angle value of 130.6°. The resultant environmental-friendly agent (PEI-KH560) obtained in this work provides valuable significance for the preparation of household and food packaging paper.
Assuntos
Interações Hidrofóbicas e Hidrofílicas , Peso Molecular , Papel , Polietilenoimina , Polietilenoimina/química , Silanos/química , Propriedades de SuperfícieRESUMO
Biomass pretreatment is an essential strategy to overcome biomass recalcitrance and promote lignocellulosic bioconversion. Here, a reusable organic solvent system (formic acid-methanesulfonic acid) was explored to pretreat poplar under a mild temperature (below 100 °C). The results showed that the co-solvent system could extract basically complete hemicelluloses and part of lignin with original cellulose retained in the pretreated substrates. Meanwhile, sulfonic acid groups were introduced into lignin structure remained in the substrates. The glucose conversion yield of the substrates with a higher concentration of sulfonic acid groups (13.2 mmol/kg) reached 45.9 % by reducing the hydrophobic interaction between lignin and cellulase, showing 89.3 % improvement compared with that of the substrates treated with single formic acid. This progressive study aimed to develop a new strategy to realize sulfonation and promote enzymatic hydrolysis of substrates by using mild organic solvent pretreatment.
Assuntos
Celulase , Populus , Lignina/química , Hidrólise , Solventes , Biomassa , Ácidos SulfônicosRESUMO
A practical method for the preparation of lignin derivatives-light-colored bio-based particles (LC-BP) via the modification of hexamethylene diisocyanate (HDI) is presented in this work. In the mixed EtOH/H2O system, the change of solvent polarity induced the self-assembly of the lignosulfonate (LS) with the hydrophobic chromophores encapsulated inside the particles. The color of LS was reduced by the polymerization between the isocyanate groups (-N=C=O) of HDI and hydroxy groups of LS. Compared with the typical lignin-based adsorbent preparation process in the past, this is a simple, direct, and efficient preparation method and the synthetic LC-BP has good chemical stability and resistance to heat, acid and alkali. This effectively solves the problem that LS has high water solubility and is difficult to use directly for wastewater treatment. To investigate the properties, the synthetic LC-BP was characterized by SEM, specific surface area, L*a*b* (CIELAB) color space, FT-IR, XPS, and TGA. The results showed that the LC-BP exhibited obvious advantages in color reduction with a low CIE-L* value. The LC-BP exhibits a scale-like intercalation structure, which makes it a promising candidate for adsorbing tetracycline (TC) from wastewater. The conditions of pH, adsorbent dosages, adsorption time, and initial TC concentration were investigated, and the adsorption performance of LC-BP for TC was significantly better than that of conventional polyurethane particles (PP). The adsorption fitted the Langmuir model and there were hydrogen bonding, π-π conjugated binding, and electrostatic attraction during the absorption process. The adsorption capacity was up to 53.1 mg/g, and the removal rate was 67 %. The utilization of LC-BP, a low-cost, effective, and renewable resource derived from natural biomass, holds immense practical and economic potential in wastewater treatment.
Assuntos
Lignina , Poluentes Químicos da Água , Adsorção , Espectroscopia de Infravermelho com Transformada de Fourier , Poluentes Químicos da Água/química , Tetraciclina/química , Antibacterianos/química , Isocianatos , Cinética , Concentração de Íons de HidrogênioRESUMO
In this study, a heat-resistant and high-wettability lithium-ion batteries separator (PI-CPM-PI) composed of cellulose nanofibers (CNF) and aramid fibers (PMIA chopped fiber/PPTA pulp) with the reinforced concrete structure was fabricated via a traditional heterogeneous paper-making process. CNF played crucial roles in optimizing the pore structure and improving the wettability of PI-CPM-PI separator. The effects of composition on separator properties were investigated and the results indicated that the optimal compositions were 0.5 wt% CNF, 0.5 wt% PMIA chopped fiber/PPTA pulp (ratio of 5:5), 0.05 wt% diatomite and 1.5 wt% polyimide. Relevant tests demonstrated that the performance advantages of PI-CPM-PI separators were exhibited at the wettability and thermal stability compared to the commercial separator (PP). Additionally, batteries assembled with PI-CPM-PI separators showed excellent electrochemical and cycling performance (ionic conductivity of 1.041 mS.cm-1, the first discharge capacity of 158.2 mAh.g-1 at 0.2C and capacity retention ratio of 99.76 % after 100 cycles).
Assuntos
Líquidos Corporais , Nanofibras , Celulose , Lítio , ÍonsRESUMO
Cellulose nanocrystal (CNC) hybrid materials with numerous optical states have great potential as anti-counterfeiting labels and information encryption materials. However, it is challenging to construct multicolor emitting materials with tunable behaviors, which can dramatically enhance anti-counterfeiting abilities. Here, free-standing composite films with vivid multi-structural colors and dual-emitting fluorescence are successfully fabricated through a host-guest coassembly strategy. The lanthanide complex and an aggregation-induced emission molecule (tetraphenylethylene derivative, TPEC) are selected as luminescent guests, which are integrated into the chiral nematic structure of CNCs. The obtained photonic films display broadband reflection across the visible spectrum, which may be attributed to the chiral nematic domains with variations in the helical pitches and helical axis orientations. Under 254 nm excitation, the film exhibits bright red emission, while blue-green emission switching occurs under 365 nm excitation. The broad reflection band of the film covers both the green and red fluorescent emission centers, and right circularly polarized luminescence emission with different dissymmetry factors is produced due to the selective reflection of the left chiral nematic structure. A large glum value up to -0.21 at 600 nm was realized. Additionally, CNC-based materials with tailored shapes are further used in anti-counterfeit tags and decorative applications.
RESUMO
We present a detailed study of a salt-free cationic/anionic (catanionic) surfactant system where a strongly alkaline cationic surfactant (tetradecyltrimethylammonium hydroxide, TTAOH) was mixed with a single-chain fluorocarbon acid (nonadecafluorodecanoic acid, NFDA) and a hyperbranched hydrocarbon acid [di-(2-ethylhexyl)phosphoric acid, DEHPA] in water. Typically the concentration of TTAOH is fixed while the total concentration and mixing molar ratio of NFDA and DEHPA is varied. In the absence of DEHPA and at a TTAOH concentration of 80 mmol·L(-1), an isotropic L(1) phase, an L(1)/L(α) two-phase region, and a single L(α) phase were observed successively with increasing mixing molar ratio of NFDA to TTAOH (n(NFDA)/n(TTAOH)). In the NFDA-rich region (n(NFDA)/n(TTAOH) > 1), a small amount of excess NFDA can be solubilized into the L(α) phase while a large excess of NFDA eventually leads to phase separation. When NFDA is replaced gradually by DEHPA, the mixed system of TTAOH/NFDA/DEHPA/H(2)O follows the same phase sequence as that of the TTAOH/NFDA/H(2)O system and the phase boundaries remain almost unchanged. However, the viscoelasticity of the samples in the single L(α) phase region becomes higher at the same total surfactant concentration as characterized by rheological measurements. Cryo-transmission electron microscopic (cryo-TEM) observations revealed a microstructural evolution from unilamellar vesicles to multilamellar ones and finally to gaint onions. The size of the vesicle and number of lamella can be controlled by adjusting the molar ratio of NFDA to DEHPA. The dynamic properties of the vesicular solutions have also been investigated. It is found that the yield stress and the storage modulus are time-dependent after a static mixing process between the two different types of vesicle solutions, indicating the occurrence of a dynamic fusion between the two types of vesicles. The microenvironmental changes induced by aggregate transitions were probed by (19)F NMR as well as (31)P NMR measurements. Upon replacement of NFDA by DEHPA, the signal from the (19)F atoms adjacent to the hydrophilic headgroup disappears and that from the (19)F atoms on the main chain becomes sharper. This could be interpreted as an increase of microfluidity in the mixed vesicle bilayers at higher content of DEHPA, whose alkyl chains are expected to have a lower chain melting point. Our results provide basic knowledge on vesicle formation and their structural evolution in salt-free catanionic surfactant systems containing mixed ion pairs, which may contribute to a deeper understanding of the rules governing the formation and properties of surfactant self-assembly.
RESUMO
In view of the deficiencies in the preparation of cellulose gels, such as, cumbersome process, harsh conditions, high consumption of chemicals, secondary pollution caused by side reactions, this work reports a facile approach to make cellulose/multi-walled carbon nanotube (MWCNTs) hydrogels and aerogels via mixing cellulose with N,N'-methylene bisacrylamide (MBA) and MWCNTs in NaOH/urea/H2O aqueous solution. The gels were revealed to be formed by an addition reaction between the double bonds of MBA and the hydroxyl groups of cellulose and the intermolecular interactions between cellulose and MWCNTs. The preparation process can be realized at room temperature and atmospheric pressure without the intervention of ultrasonic dispersion, catalyst and initiator. The gelation time, puncture strength and water retention ability of the hydrogels were investigated. Results showed that, compared with pure cellulose hydrogel, cellulose/MWNCTs hydrogels have obviously shorter sol-gel transition time (124-129.2 min), higher puncture strength (29.6022-34.2854 KPa) and water retention ability (274.2619-301.7291 g/g). Cellulose/MWCNTs aerogels possessed three dimensional network with macroporous structure (about 500 µm), low density (0.00546-0.00557 g/cm3), high porosity (99.6360-99.6426 %), good thermal stability (242 °C) and certain absorbency to methylene blue (233.2901-242.1122 mg/g).
Assuntos
Azul de Metileno , Nanotubos de Carbono , Adsorção , Celulose/química , Hidrogéis/química , Água/químicaRESUMO
During the traditional autohydrolysis, formation and deposition of "pseudo-lignin" and lignin droplets on the surface of biomass had a detrimental effect on the subsequent biomass conversion. In this study, isothermal phase separation was introduced into autohydrolysis, and the effects of isothermal phase separation on the dissolution of components and enzymatic hydrolysis of bamboo were studied. The research showed that isothermal phase separation after autohydrolysis without cooling had an effective reduction in the deposition of "pseudo-lignin" and lignin droplets on the residues surface. After isothermal phase separation, the contents of sugar (14.05 g/L) and lignin (6.16 g/L) in pre-hydrolysates increased by 20% and 19% compared with control, respectively. Moreover, the efficient removal of "pseudo-lignin" and lignin droplets from cell wall surface could further promote the biological conversion of pretreated biomass (22% higher than that of control) during the subsequent enzymatic hydrolysis.
Assuntos
Parede Celular , Lignina , Biomassa , HidróliseRESUMO
This work aimed to construct a polysaccharide-based mulch film with good performance for replacing plastic mulch by coating the glutaraldehyde crosslinking chitosan and humic acid/urea complexes (GCS) into cellulose/humic acid (HA/CE) film. By flow-coating with GCS to construct hierarchical networks, GCS-HA/CE film is endowed with the improved property. The influences of composition with different concentrations on mechanical properties were studied, and the optimum concentration was determined. The tensile strength and elongation of GCS-HA/CE film could reach 53.97 MPa and 12.86 % in dry state, respectively. Results suggest that glutaraldehyde crosslinking reduces moisture content, water solubility, and water vapor permeability, but increases contact angle (94.025°). Meanwhile, the thermostability and ultraviolet resistance were improved. The infrared spectroscopy and X-ray diffractometry demonstrated the successfully crosslinked by glutaraldehyde. Morphological analyses present film has excellent compatibility. In addition, GCS-HA/CE film shows good heat preservation, aging resistance, and biodegradability, indicating certain guiding significance for polysaccharide-based mulch film.
Assuntos
Quitosana , Substâncias Húmicas , Fenômenos Químicos , Quitosana/química , Glutaral/química , Interações Hidrofóbicas e Hidrofílicas , Permeabilidade , Resistência à TraçãoRESUMO
Chiral nematic papers (CNPs) with mesopores structure based on cellulose nanocrystals (CNCs) were fabricated successfully via a swelling and freeze-drying method. The order of the original chiral nematic cellulose nanocrystals film was preserved in CNPs, which was proved by scanning electron microscopy (SEM), polarized optical microscopy (POM) measurements and circular dichroism (CD) spectra. The CNPs exhibited excellent optical responsive properties to different solvents. Inspired by this feature, a colorable ink containing amounts of gel particles was prepared by pulverizing CNPs/water mixture into a suspension. Patterns written in suspension ink with various colors can be formed when soaked with different solvents. Moreover, CNPs displayed an irreversible color response to compression. Additionally, the hydrophilicity of CNPs was tuned by polyethyleneimine. Modified CNPs exhibited different colors under the identical solvent environment when compared to the original one. Aqueous PEI can be used as an ink to depict responsive photonic patterns on CNPs.
Assuntos
Celulose , Nanopartículas , Celulose/química , Interações Hidrofóbicas e Hidrofílicas , Nanopartículas/química , SolventesRESUMO
Solar desalination devices utilizing sustainable solar energy and the abundant resource of seawater has great potential as a response to global freshwater scarcity. Herein, a bilayered solar evaporator was designed and fabricated utilizing a facile paper sheet forming technology, which was composed of cellulose fibers decorated with Fe3O4 nanoparticles as the top absorbent layer and the original cellulose fibers as the bottom supporting substrate. The characterization of the cellulose fibers decorated with Fe3O4 nanoparticles revealed that the in situ formed Fe3O4 nanoparticles were successfully loaded on the fiber surface and presented a unique rough surface, endowing the absorber layer with highly efficient light absorption and photothermal conversion. Moreover, due to its superhydrophilic property, the cellulose fiber-based bottom substrate conferred ultra-speed water transport capability, which could enable an adequate water supply to combat the water loss caused by continuous evaporation on the top layer. With the advantages mentioned above, our designed bilayered paper-based evaporator achieved an evaporation rate ~1.22 kg m-2 h-1 within 10 min under 1 sun irradiation, which was much higher than that of original cellulose cardboard. Based on the simple and scalable manufacture process, the bilayered paper-based evaporator may have great potential as a highly efficient photothermal conversion material for real-world desalination applications.
RESUMO
Integrated fractionation process based on autohydrolysis (H) and subsequent formic acid delignification (FAD) has been considered as an effective strategy to separate the main lignocellulosic components in view of the biorefinery. For the better understanding of the structural changes of the lignin during the integrated process, the fractionated aspen lignins were thoroughly characterized by Fourier transform infrared (FT IR), 13C, two-dimensional heteronuclear single quantum coherence (2D-HSQC) and 31P nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC), and thermogravimetric analysis (TGA). Compared to the milled wood lignin (MWL), the fractionated lignins had higher amounts of phenolic OH groups as due to the cleavage of ß-O-4 linkages and less alcoholic OH groups mainly due to the esterification of the aliphatic OH groups by formic acid. Demethylation action of the lignin was not significant during the FAD process. More syringyl-propane (S) units were extracted during the H-FAD process than guaiacyl-propane (G) units resulting in a higher S/G ratio and more OCH3 in the fractionated lignins. Furthermore, autohydrolysis of aspen at higher temperature led to more condensation of the fractionated lignins which exhibited higher molecular weight and more ß-5 and ß-ß linkages. The fractionated lignins exhibited high purities due to the breakage of the lignin-carbohydrate bonds.
Assuntos
Fracionamento Químico/métodos , Formiatos/química , Lignina/química , Populus/química , Carboidratos/química , Espectroscopia de Ressonância Magnética Nuclear de Carbono-13 , Hidrólise , Peso Molecular , Espectroscopia de Infravermelho com Transformada de Fourier , Temperatura , TermogravimetriaRESUMO
The removal of lignin is important to the recovery of saccharides from the pre-hydrolysis liquor (PHL) in kraft-based dissolved pulp production. A one-step process for lignin removal from PHL via treatment with horseradish peroxidase (HRP) in the presence of Ca2+ was proposed, and its principle was studied. The results demonstrated synergy between HRP and Ca2+ in lignin removal from PHL, whereas NH4+ had little effect on lignin removal. HRP treatment in the presence of 60 mmol/L of Ca2+ resulted in a lignin removal of 64.8% accompanied by a saccharide loss of 14.2%. HRP catalyzed both the polymerization and depolymerization of the lignin in the PHL. The HRP-catalyzed lignin polymerization rendered some lignin insoluble enabling it to be directly removed. The HRP-catalyzed depolymerization of lignin decreased its molecular weight with an evident increase in its carboxyl content. The insoluble complexes formed between the lignin with carboxyl and the Ca2+ facilitated the removal of the depolymerized lignin.
Assuntos
Peroxidase do Rábano Silvestre/farmacologia , Hidrólise/efeitos dos fármacos , Lignina/isolamento & purificação , Açúcares/química , Cálcio/química , Peroxidase do Rábano Silvestre/química , Lignina/químicaRESUMO
A type of cellulose solvent, i.e., aqueous N-methylmorpholine- N-O xide (NMMO) solutions, was used to modify cellulose nanocrystal (CNC) photonic films. CNC films can be swollen by NMMO, resulting in red-shifted reflected colors. The swelling effect is supposed to come from NMMO permeation into the crystalline regions of individual CNCs and intercalating in between CNC particles. When NMMO was removed, the reflected colors of CNC films blue shifted because of the reduced helical pitches. NMMO-treated CNC films display reversible responsive colors to humidity changes in several minutes. Increasing NMMO content allows CNC films to enlarge the responsive color range. Aqueous NMMO can be used as an ink to depict responsive photonic patterns on CNC films. This post-treatment approach to producing responsive colors and photonic patterns in CNC films may be applied to the areas of sensor, anti-counterfeiting, and decoration.
RESUMO
Artificial antioxidants are synthesized from fossil sources and are now widely used in the polymer, food, and cosmetics industries. The gradual depletion of fossil resources makes it practically significant and necessary to produce green antioxidants from renewable lignocellulosic resources. Herein, short-time hydrothermal (STH) treatment was developed for production of lignin-derived polyphenol antioxidants (LPAs) from poplar wood under conditions of high temperature and high pressure. LPA yields from 21.5 to 37.6 % on the basis of lignin in untreated wood were obtained by STH treatments as result of lignin depolymerization at 190-200 °C and 10â MPa in 5-8â min. Depolymerization reactions were confirmed by the much lower molecular weight of LPA (1076â g mol-1 ) than that of native lignin (4094â g mol-1 ). NMR spectroscopy revealed the structural features of lignin in the isolated LPA, namely syringyl and guaiacyl units with well-preserved interunit linkages. A Folin-Ciocalteu assay indicated that each LPA molecule contained 5.4 phenolic hydroxyl groups on average, much more than other technical lignins. The remarkable antioxidant ability of LPA was verified by the radical-scavenging index of 53.5-67.3, much higher than 0.2-11.1 of the commercial antioxidants butylated hydroxytoluene (BHT) and butylated hydroxyanisole (BHA). STH treatment only requires water and heat for production of high-value antioxidant, which provides a green and sustainable method for the utilization of lignocelluloses.
RESUMO
Performance and efficiency of old newspaper (ONP) deinking by combining cellulase/hemicellulase with laccase-violuric acid system (LVS) were investigated in this study. Brightness, effective residual ink concentration (ERIC) and physical properties were evaluated for the deinked pulp. Fiber length, coarseness, specific surface area and specific volume were also tested. The changes of dissolved lignin during the deinking processes were measured with UV spectroscopy. The fiber morphology was observed with environmental scanning electronic microscopy (ESEM). Experimental results showed that, compared to the pulp deinked with each individual enzyme, ERIC was lower for the cellulase/hemicellulase-LVS-deinked pulp. This indicated that a synergy existed in ONP deinking using a combination of enzymes. After being bleached by H(2)O(2), enzyme-combining deinked pulp gave higher brightness and better strength properties. Compared with individual enzyme deinked pulp, average fiber length and coarseness decreased a little for the enzyme-combining deinked pulps. A higher specific surface area and specific volume of the pulp fibers were achieved. UV analysis proved that more lignin was released during the enzyme-combining deinking process. ESEM images showed that more fibrillation was observed on the fiber surface due to synergistic treatment.
Assuntos
Barbitúricos/química , Celulase/química , Glicosídeo Hidrolases/química , Tinta , Lacase/química , Papel , Eliminação de Resíduos/métodos , Microscopia Eletrônica de Varredura , Jornais como Assunto , Espectrofotometria UltravioletaRESUMO
Whole valorization of carbohydrate and lignin from biomass was achieved by rapid flow-through fractionation (RFF) within 15â min. Wheat straw was effectively deconstructed into its principle components without degradation by using easily recyclable aqueous formic acid (72â wt %) at 130 °C. The obtained cellulose-rich solid showed a nearly complete glucan recovery and 73.8 % glucose conversion after enzymatic hydrolysis. Xylan also reached full recovery with negligible furfural formation with a sum of 80 % of oligo/mono xylose in spent liquor and 20 % of xylan remaining in the solid. Up to 75.4 % lignin was dissolved in the spent liquor and further fractionated into water-insoluble (WIL) and water-soluble lignin (WSL) by dilution with water. WIL showed a non-condensed and well-preserved structure with 84.5 % ß-O-4 remaining, which is believed to be beneficial for catalytic conversion into low-molecular-weight chemicals and fuels. The concentration of employed formic acid was below the formic acid/water azeotrope, and therefore the reaction medium could be restored through simple distillation. Together with the joint valorization of lignin and carbohydrates, the presented RFF is a promising process for sustainable biorefinery.