Regulating Grafting Density to Realize High-Areal-Capacity Silicon Submicroparticle Anodes Under Ultralow Binder Content.

Grafted biopolymer binders are demonstrated to improve the processability and cycling stability of the silicon (Si) nanoparticle anodes. However, there is little systematical exploration regarding the relationship between grafting density and performance of grafted binder for Si anodes, especially when Si particles exceed the critical breaking size. Herein, a series of guar gum grafted polyacrylamide (GP) binders with different grafting densities are designed and prepared to determine the optimal grafting density for maximizing the electrochemical performance of Si submicroparticle (SiSMP) anodes. Among various GP binders, GP5 with recommended grafting density demonstrates the strongest adhesion strength, best mechanical properties, and highest intrinsic ionic conductivity. These characteristics enable the SiSMP electrodes to sustain the electrode integrity and accelerate lithium-ion transport kinetics during cycling, resulting in high capacity and stable cyclability. The superior role of GP5 binder in enabling robust structure and stable interface of SiSMP electrodes is revealed through the PeakForce atomic force microscopy and in situ differential electrochemical mass spectrometry. Furthermore, the stable cyclabilities of high-loading SiSMP@GP5 electrode with ultralow GP5 content (1 wt%) at high areal capacity as well as the good cyclability of Ah-level LiNi0.8Co0.1Mn0.1O2/SiSMP@GP5 pouch cell strongly confirms the practical viability of the GP5 binder.

Beam shape coefficient calculation for a Gaussian beam: localized approximation, quadrature and angular spectrum decomposition methods.

Three methods for calculating the beam shape coefficients (the quadrature, the angular spectrum decomposition (ASD), and the localized approximation methods) are studied. The normalized associated Legendre function is employed in the calculation so as to prevent overflow. The two-dimensional integrations in the quadrature and the ASD methods are developed to the one-dimensional integration to speed up the calculation. The Gaussian beams reconstructed with different methods are compared, showing the difference in the remodeling effects of these methods. The reason for the presence of pseudodistribution in the localized model is given.

Cross-Linked γ-Polyglutamic Acid as an Aqueous SiOx Anode Binder for Long-Term Lithium-Ion Batteries.

Silicon oxide (SiOx) has outstanding capacity and stable lithium-ion uptake/removal electrochemistry as a lithium-ion anode material; however, its practical massive commercialization is encumbered by unavoidable challenges, such as dynamic volume changes during cycling and inherently inferior ionic conductivities. Recent literature has offered a consensus that binders play a critical role in affecting the electrochemical performance of Si-based electrodes. Herein, we report an aqueous binder, γ-polyglutamic acid cross-linked by epichlorohydrin (PGA-ECH), that guarantees enhanced properties for SiOx anodes to implement long-term cycling stability. The abundant amide, carboxyl, and hydroxyl groups in the binder structure form strong interactions with the SiOx surface, which contribute strong interfacial adhesion. The robust covalent interactions and strong supramolecular interactions in the binder ensure mechanical strength and elasticity. Additionally, the interactions between lithium ions and oxygen (nitrogen) atoms of carboxylate (peptide) bonds, which serve as a Lewis base, facilitate the diffusion of lithium ions. A SiOx anode using this PGA-ECH binder exhibits an impressive initial discharge capacity of 1962 mA h g-1 and maintains a high capacity of 900 mA h g-1 after 500 cycles at 500 mA g-1. Meanwhile, the assembled SiOx||LiNi0.6Co0.2MnO0.2 full cell shows a reversible capacity of 155 mA g-1 and displays 73% capacity retention after 100 cycles.

Aqueous Supramolecular Binder for a Lithium-Sulfur Battery with Flame-Retardant Property.

A lithium-sulfur (Li-S) battery based on multielectron chemical reactions is considered as a next-generation energy-storage device because of its ultrahigh energy density. However, practical application of a Li-S battery is limited by the large volume changes, insufficient ion conductivity, and undesired shuttle effect of its sulfur cathode. To address these issues, an aqueous supramolecular binder with multifunctions is developed by cross-linking sericin protein (SP) and phytic acid (PA). The combination of SP and PA allows one to control the volume change of the sulfur cathode, benefit soluble polysulfides absorbing, and facilitate transportation of Li+. Attributed to the above merits, a Li-S battery with the SP-PA binder exhibits a remarkable cycle performance improvement of 200% and 120% after 100 cycles at 0.2 C compared with Li-S batteries with PVDF and SP binders. In particular, the SP-PA binder in the electrode displays admirable flame-retardant performance due to formation of an isolating layer and the release of radicals.

Water-Soluble Trifunctional Binder for Sulfur Cathodes for Lithium-Sulfur Battery.

Conventional polymer binder in a lithium-sulfur (Li-S) battery, poly(vinylidene fluoride) (PVDF), suffers from insufficient ion conductivity, poor polysulfide-trapping ability, weak mechanical property, and requirement of organic solvents, which significantly encumber the industrial application of Li-S battery. Herein, a water-soluble binder with trifunctions, covalently cross-linked quaternary ammonium cationic starch (c-QACS), is developed to confront these issues. Similar to the poly(ethylene oxide) solid electrolytes, the c-QACS binder remarkably improves Li+ ion transfer capacity. The abundant O actives endow the c-QACS binder with admirable lithium polysulfide-trapping capability to retard the shuttle effect. In addition, the formed 3D network effectively maintains the electrode integrity during cycling. Benefiting from the above merits, the sulfur cathode with the c-QACS binder demonstrates a performance improvement of 300 and 150% compared with sulfur cathode with PVDF and bulk QACS binder after 100 cycles at 0.2C.