Uranium(IV) and Thorium(IV) Coordination Polymers Based on Tritopic Carboxylic Acids.

Nine new coordination polymers based on U(IV) and Th(IV) were synthesized solvothermally utilizing four different trianionic carboxylates (H3BHTC = biphenyl-3,4',5-tricarboxylic acid, H3NTB = 4,4',4″-nitrilotribenzoic acid, H3BTB = 4,4',4″-benzene-1,3,5-triyl-tris(benzoic acid), H3BTE = 4,4',4″-(1,3,5-benzenetriyltri-2,1-ethynediyl)trisbenzoic acid). The influence of the ligand architecture, the pH, the stoichiometry, the nature of the metal, and the concentration on the structure and dimensionality of the final actinide assembly is discussed. The H3BHTC ligand allowed the synthesis of a cationic three-dimensional (3D) framework [U(BHTC)(DMF)3]I (1), which is the first example of a cationic U(IV) polymer. The H3NTB ligand yielded the 3D neutral polymer [U3(NTB)4] (2) or the two-dimensional (2D) cationic polymer [U(NTB)(NMP)3]I (3), depending on the solvent. When conditions leading to (2) were used with a Th(IV) precursor, the 2D neutral polymer [Th(NTB)(DMF)3Cl] (4) was obtained. The ligand H3BTB allowed the synthesis of two 3D cationic networks [U(BTB)(DMF)2]I (5) and [U(BTB)(DMF)3]I (7) or the neutral 3D analogue [U3(BTB)4] (6), depending on the precursor's oxidation state and the acidity of the reaction mixture. The ligand H3BTE allowed the synthesis of the anionic 3D [(CH3)2NH2][U2(BTE)3] (8) framework featuring large accessible pores, and under the same conditions, an isostructural Th(IV) was also obtained [(CH3)2NH2][Th2(BTE)3] (8-Th). All isolated coordination polymers were characterized by single-crystal X-ray diffraction (SCXRD). The Langmuir surface areas of the U(IV) polymers (2), (7), and (8) increased from 140 to 310 m2/g owing to the increasing size of the linker, with polymer (8) showing a value that is comparable to the highest surface area reported to date. The effect of the postsynthetic solvent substitution was also studied, revealing a crystal-to-crystal transformation of the cationic framework (7) to the neutral framework [U(BTB)(THF)I] (7c).

A Simple, Transition Metal Catalyst-Free Method for the Design of Complex Organic Building Blocks Used to Construct Porous Metal-Organic Frameworks.

The design of metal-organic frameworks (MOFs) having large pore sizes and volumes often requires the use of complex organic ligands, currently synthesized using costly and time-consuming palladium-catalyzed coupling chemistry. Thus, in the present work, a new strategy for ligand design is reported, where piperazine and dihydrophenazine units are used as substitutes for benzene rings, which are the basic building block of most MOF ligands. This chemistry, which is based on simple, nucleophilic aromatic substitution (SN Ar) reactions, is used for the transition metal catalyst-free construction of 21 new, carboxylate-based ligands with varying sizes, shapes, and denticity and 15 linear di- and tetra-nitriles. Moreover, to demonstrate the utility of the ligands as building blocks, 16 new structurally diverse MOFs having surface areas up to 3100 m2 g-1 were also synthesized.

Rapid, Selective Extraction of Silver from Complex Water Matrices with a Metal-Organic Framework/Oligomer Composite Constructed via Supercritical CO2.

Every year vast quantities of silver are lost in various waste streams; this, combined with its limited, diminishing supply and rising demand, makes silver recovery of increasing importance. Thus, herein, we report a controllable, green process to produce a host of highly porous metal-organic framework (MOF)/oligomer composites using supercritical carbon dioxide (ScCO2 ) as a medium. One resulting composite, referred to as MIL-127/Poly-o-phenylenediamine (PoPD), has an excellent Ag+ adsorption capacity, removal efficiency (>99 %) and provides rapid Ag+ extraction in as little as 5 min from complex liquid matrices. Notably, the composite can also reduce sliver concentrations below the levels (<0.1 ppm) established by the United States Environmental Protection Agency. Using theoretical simulations, we find that there are spatially ordered polymeric units inside the MOF that promote the complexation of Ag+ over other common competing ions. Moreover, the oligomer is able to reduce silver to its metallic state, also providing antibacterial properties.

A Two Step Postsynthetic Modification Strategy: Appending Short Chain Polyamines to Zn-NH2-BDC MOF for Enhanced CO2 Adsorption.

Functionalizing metal-organic frameworks (MOFs) with amines is a commonly used strategy to enhance their performance in CO2 capture applications. As such, in this work, a two-step strategy to covalently functionalize NH2-containing MOFs with short chain polyamines was developed. In the first step, the parent MOF, Zn4O(NH2-BDC)3, was exposed to bromoacetyl bromide (BrAcBr), which readily reacts with pendant -NH2 groups on the 2-amino-1,4-benzenedicarboxylate (NH2-BDC2-) ligand. 1H NMR of the digested MOF sample revealed that as much as 90% of the MOF ligands could be functionalized in the first step. Next, the MOF samples 60% of the ligands functionalized with acetyl bromide, Zn4O(NH2-BDC)1.2(BrAcNH-BDC)1.8, was exposed to several short chain amines including ethylenediamine (ED), diethylenetriamine (DETA), and tris(2-aminoethyl)amine (TAEA). Subsequent digested 1H NMR analysis indicated that a total of 30%, 28%, and 19% of the MOF ligands were successfully grafted to ED, DETA, and TAEA, respectively. Next, the CO2 adsorption properties of the amine grafted MOFs were studied. The best performing material, TAEA-appended-Zn4O(NH2-BDC)1.2(BrAcNH-BDC)1.8, exhibits a zero-coverage isosteric heat of CO2 adsorption of -62.5 kJ/mol, a value that is considerably higher than the one observed for the parent framework, -21 kJ/mol. Although the boosted CO2 affinity only leads to a slight increase in the CO2 adsorption capacity in the low-pressure regime (0.15 bar), which is of interest in postcombustion carbon dioxide capture, the CO2/N2 (15/85) selectivity at 313 K is 143, a value that is ∼35 times higher than the one observed for Zn4O(NH2-BDC)3, 4.1. Such enhancements are attributed to accessible primary amines, which were grafted to the MOF ligand. This hypothesis was further supported via in situ DRIFTS measurements of TAEA-Ac-Zn4O(NH2-BDC)1.2(BrAcNH-BDC)1.8 after exposure to CO2, which revealed the chemisorption of CO2 via the formation of hydrogen bonded carbamates/carbamic acid and CO2δ- species; the latter are adducts formed between CO2 and [amineH]+Br- salts that are produced during the amine grafting step.

Preparation of Highly Porous Metal-Organic Framework Beads for Metal Extraction from Liquid Streams.

Metal-organic frameworks (MOFs) offer great promise in a variety of gas- and liquid-phase separations. However, the excellent performance on the lab scale hardly translates into pilot- or industrial-scale applications due to the microcrystalline nature of MOFs. Therefore, the structuring of MOFs into pellets or beads is a highly solicited and timely requirement. In this work, a general structuring method is developed for preparing MOF-polymer composite beads based on an easy polymerization strategy. This method adopts biocompatible, biodegradable poly(acrylic acid) (PAA) and sodium alginate monomers, which are cross-linked using Ca2+ ions. Also, the preparation procedure employs water and hence is nontoxic. Moreover, the universal method has been applied to 12 different structurally diverse MOFs and three MOF-based composites. To validate the applicability of the structuring method, beads consisting of a MOF composite, namely Fe-BTC/PDA, were subsequently employed for the extraction of Pb and Pd ions from real-world water samples. For example, we find that just 1 g of Fe-BTC/PDA beads is able to decontaminate >10 L of freshwater containing highly toxic lead (Pb) concentrations of 600 ppb while under continuous flow. Moreover, the beads offer one of the highest Pd capacities to date, 498 mg of Pd per gram of composite bead. Furthermore, large quantities of Pd, 7.8 wt %, can be readily concentrated inside the bead while under continuous flow, and this value can be readily increased with regenerative cycling.

Preserving Porosity of Mesoporous Metal-Organic Frameworks through the Introduction of Polymer Guests.

High internal surface areas, an asset that is highly sought after in material design, has brought metal-organic frameworks (MOFs) to the forefront of materials research. In fact, a major focus in the field is on creating innovative ways to maximize MOF surface areas. Despite this, large-pore MOFs, particularly those with mesopores, continue to face problems with pore collapse upon activation. Herein, we demonstrate an easy method to inhibit this problem via the introduction of small quantities of polymer. For several mesoporous, isostructural MOFs, known as M2(NDISA) (where M = Ni2+, Co2+, Mg2+, or Zn2+), the accessible surface areas are increased dramatically, from 5 to 50 times, as the polymer effectively pins the MOFs open. Postpolymerization, the high surface areas and crystallinity are now readily maintained after heating the materials to 150 °C under vacuum. These activation conditions, which could not previously be attained due to pore collapse, also provide accessibility to high densities of open metal coordination sites. Molecular simulations are used to provide insight into the origin of instability of the M2(NDISA) series and to propose a potential mechanism for how the polymers immobilize the linkers, improving framework stability. Last, we demonstrate that the resulting MOF-polymer composites, referred to as M2(NDISA)-PDA, offer a perfect platform for the appendage/immobilization of small nanocrystals inside rendering high-performance catalysts. After decorating one of the composites with Pd (average size: 2 nm) nanocrystals, the material shows outstanding catalytic activity for Suzuki-Miyaura cross-coupling reactions.

Recent Advances of MOFs and MOF-Derived Materials in Thermally Driven Organic Transformations.

Owing to the almost boundless structural tunability, MOF and MOF-derived catalysts have recently exhibited structures of higher complexity, and hence, have demonstrated activity in a wide array of organic transformations. These reactions have a broad range of important applications ranging from pharmaceuticals to agriculture. Given the increasing number of publications in the area, this Minireview is focused on the most recent advancements in thermally driven organic transformations using both MOFs, nanoparticle@MOF (NP@MOF) composites, and several classes of MOF-derived materials. The most recent advancements made in materials design and the utility of these materials in a broad range of reactions are discussed.

An In-Situ Neutron Diffraction and DFT Study of Hydrogen Adsorption in a Sodalite-Type Metal-Organic Framework, Cu-BTTri.

Herein we present a detailed study of the hydrogen adsorption properties of Cu-BTTri, a robust crystalline metal-organic framework containing open metal-coordination sites. Diffraction techniques, carried out on the activated framework, reveal a structure that is different from what was previously reported. Further, combining standard hydrogen adsorption measurements with in-situ neutron diffraction techniques provides molecular level insight into the hydrogen adsorption process. The diffraction experiments unveil the location of four D2 adsorption sites in Cu-BTTri and shed light on the structural features that promote hydrogen adsorption in this material. Density functional theory (DFT), used to predict the location and strength of binding sites, corroborate the experimental findings. By decomposing binding energies in different sites in various energetic contributions, we show that van der Waals interactions play a crucial role, suggesting a possible route to enhancing the binding energy around open metal coordination sites.

Rapid, Selective Extraction of Trace Amounts of Gold from Complex Water Mixtures with a Metal-Organic Framework (MOF)/Polymer Composite.

With the ever-increasing production of electronics, there is an ensuing need for gold extraction from sources other than virgin mines. Currently, there are no technologies reported to date that can effectively and selectively concentrate ultratrace amounts of gold from liquid sources. Here, we provide a blueprint for the design of several highly porous composites made up of a metal-organic framework (MOF) template and redox active, polymeric building blocks. One such composite, Fe-BTC/PpPDA, is shown to rapidly extract trace amounts of gold from several complex water mixtures that include wastewater, fresh water, ocean water, and solutions used to leach gold from electronic waste and sewage sludge ash. The material has an exceptional removal capacity, 934 mg gold/g of composite, and extracts gold from these complex mixtures at record-breaking rates, in as little as 2 min. Further, due to the high cyclability, we demonstrate that the composite can effectively concentrate gold and yield purities of 23.9 K.

MOF-Derived Cobalt Phosphide/Carbon Nanocubes for Selective Hydrogenation of Nitroarenes to Anilines.

Transition-metal phosphides have received tremendous attention during the past few years because they are earth-abundant, cost-effective, and show outstanding catalytic performance in several electrochemically driven conversions including hydrogen evolution, oxygen evolution, and water splitting. As one member of the transition-metal phosphides, Cox P-based materials have been widely explored as electrocatalyts; however, their application in the traditional thermal catalysis are rarely reported. In this work, cobalt phosphide/carbon nanocubes are designed and their catalytic activity for the selective hydrogenation of nitroarenes to anilines is studied. A high surface area metal-organic framework (MOF), ZIF-67, is infused with red phosphorous, and then pyrolysis promotes the facile production of the phosphide-based catalysts. The resulting composite, consisting of Co2 P/CNx nanocubes, is shown to exhibit excellent catalytic performance in the selective hydrogenation of nitroarenes to anilines. To the best of our knowledge, this is the first report showing catalytic activity of a cobalt phosphide in nitroarenes hydrogenation.

Catalyst-Free Synthesis of Aryl Diamines via a Three-Step Reaction Process.

The formation of C-N bonds with aryl amines is one of the most widely studied reactions in organic chemistry. Despite this, it is still highly challenging, often requiring expensive, precious metal-based catalysts. Here we report an easy catalyst-free methodology for constructing C-N bonds. The method, which proceeds via the in situ formation of closed ring amidinium ions, allows the preparation of a series of symmetrical and/or unsymmetrical aryl diamines in notably high yields (82-98%) and purity and with a variety of different substituents. The methodology is shown successful for the preparation of aryl diamines having para- and/or meta-substituted carboxyl, nitro, bromo, methoxy, or methyl groups. This green synthetic pathway, which is catalyst free, requires only three steps, and proceeds without the need for purification. Further, it is a new sustainable, economically viable method to achieve an otherwise challenging bond formation.

Hydrogen Storage and Selective, Reversible O2 Adsorption in a Metal-Organic Framework with Open Chromium(II) Sites.

A chromium(II)-based metal-organic framework Cr3 [(Cr4 Cl)3 (BTT)8 ]2 (Cr-BTT; BTT(3-) =1,3,5-benzenetristetrazolate), featuring coordinatively unsaturated, redox-active Cr(2+) cation sites, was synthesized and investigated for potential applications in H2 storage and O2 production. Low-pressure H2 adsorption and neutron powder diffraction experiments reveal moderately strong Cr-H2 interactions, in line with results from previously reported M-BTT frameworks. Notably, gas adsorption measurements also reveal excellent O2 /N2 selectivity with substantial O2 reversibility at room temperature, based on selective electron transfer to form Cr(III) superoxide moieties. Infrared spectroscopy and powder neutron diffraction experiments were used to confirm this mechanism of selective O2 binding.

Gradual release of strongly bound nitric oxide from Fe2(NO)2(dobdc).

An iron(II)-based metal-organic framework featuring coordinatively unsaturated redox-active metal cation sites, Fe2(dobdc) (dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate), is shown to strongly bind nitric oxide at 298 K. Adsorption isotherms indicate an adsorption capacity greater than 16 wt %, corresponding to the adsorption of one NO molecule per iron center. Infrared, UV-vis, and Mössbauer spectroscopies, together with magnetic susceptibility data, confirm the strong binding is a result of electron transfer from the Fe(II) sites to form Fe(III)-NO(-) adducts. Consistent with these results, powder neutron diffraction experiments indicate that NO is bound to the iron centers of the framework with an Fe-NO separation of 1.77(1) Å and an Fe-N-O angle of 150.9(5)°. The nitric oxide-containing material, Fe2(NO)2(dobdc), steadily releases bound NO under humid conditions over the course of more than 10 days, suggesting it, and potential future iron(II)-based metal-organic frameworks, are good candidates for certain biomedical applications.

Recent Advances in Carbon Capture with Metal-Organic Frameworks.

The escalating level of CO(2) in the atmosphere is one of the most critical environmental issues of our age. The carbon capture and storage from pilot test plants represents an option for reducing CO(2) emissions, however, the energy cost associated with post-combustion carbon capture process alone is ∼30% of the total energy generated by the power plant. Thus, the generation of carbon capture adsorbents with high uptake capacities, great separation performance and low cost is of paramount importance. Metal-organic frameworks are infinite networks of metal-containing nodes bridged by organic ligands through coordination bonds into porous extended structures and several reports have revealed that they are ideal candidates for the selective capture of CO(2). In this review we summarize recent advances related to the synthesis of porous MOFs and the latest strategies to enhance the CO(2) adsorption enthalpies and capacities at low-pressures, increase hydrolytic and mechanical stabilities, and improve the ease of regeneration. Although they show great promise for post-combustion carbon capture, there are still major challenges that must be overcome before they can be used for such a large-scale application.

Water adsorption in porous metal-organic frameworks and related materials.

Water adsorption in porous materials is important for many applications such as dehumidification, thermal batteries, and delivery of drinking water in remote areas. In this study, we have identified three criteria for achieving high performing porous materials for water adsorption. These criteria deal with condensation pressure of water in the pores, uptake capacity, and recyclability and water stability of the material. In search of an excellently performing porous material, we have studied and compared the water adsorption properties of 23 materials, 20 of which are metal-organic frameworks (MOFs). Among the MOFs are 10 zirconium(IV) MOFs with a subset of these, MOF-801-SC (single crystal form), -802, -805, -806, -808, -812, and -841 reported for the first time. MOF-801-P (microcrystalline powder form) was reported earlier and studied here for its water adsorption properties. MOF-812 was only made and structurally characterized but not examined for water adsorption because it is a byproduct of MOF-841 synthesis. All the new zirconium MOFs are made from the Zr6O4(OH)4(-CO2)n secondary building units (n = 6, 8, 10, or 12) and variously shaped carboxyl organic linkers to make extended porous frameworks. The permanent porosity of all 23 materials was confirmed and their water adsorption measured to reveal that MOF-801-P and MOF-841 are the highest performers based on the three criteria stated above; they are water stable, do not lose capacity after five adsorption/desorption cycles, and are easily regenerated at room temperature. An X-ray single-crystal study and a powder neutron diffraction study reveal the position of the water adsorption sites in MOF-801 and highlight the importance of the intermolecular interaction between adsorbed water molecules within the pores.

Reversible CO binding enables tunable CO/H2 and CO/N2 separations in metal-organic frameworks with exposed divalent metal cations.

Six metal-organic frameworks of the M2(dobdc) (M = Mg, Mn, Fe, Co, Ni, Zn; dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate) structure type are demonstrated to bind carbon monoxide reversibly and at high capacity. Infrared spectra indicate that, upon coordination of CO to the divalent metal cations lining the pores within these frameworks, the C-O stretching frequency is blue-shifted, consistent with nonclassical metal-CO interactions. Structure determinations reveal M-CO distances ranging from 2.09(2) Å for M = Ni to 2.49(1) Å for M = Zn and M-C-O angles ranging from 161.2(7)° for M = Mg to 176.9(6)° for M = Fe. Electronic structure calculations employing density functional theory (DFT) resulted in good agreement with the trends apparent in the infrared spectra and crystal structures. These results represent the first crystallographically characterized magnesium and zinc carbonyl compounds and the first high-spin manganese(II), iron(II), cobalt(II), and nickel(II) carbonyl species. Adsorption isotherms indicate reversible adsorption, with capacities for the Fe, Co, and Ni frameworks approaching one CO per metal cation site at 1 bar, corresponding to loadings as high as 6.0 mmol/g and 157 cm(3)/cm(3). The six frameworks display (negative) isosteric heats of CO adsorption ranging from 52.7 to 27.2 kJ/mol along the series Ni > Co > Fe > Mg > Mn > Zn, following the Irving-Williams stability order. The reversible CO binding suggests that these frameworks may be of utility for the separation of CO from various industrial gas mixtures, including CO/H2 and CO/N2. Selectivities determined from gas adsorption isotherm data using ideal adsorbed solution theory (IAST) over a range of gas compositions at 1 bar and 298 K indicate that all six M2(dobdc) frameworks could potentially be used as solid adsorbents to replace current cryogenic distillation technologies, with the choice of M dictating adsorbent regeneration energy and the level of purity of the resulting gases.

A post-synthetic modification strategy for enhancing Pt adsorption efficiency in MOF/polymer composites.

Growing polymers inside porous metal-organic frameworks (MOFs) can allow incoming guests to access the backbone of otherwise non-porous polymers, boosting the number and/or strength of available adsorption sites inside the porous support. In the present work, we have devised a novel post-synthetic modification (PSM) strategy that allows one to graft metal-chelating functionality onto a polymer backbone while inside MOF pores, enhancing the material's ability to recover Pt(iv) from complex liquids. For this, polydopamine (PDA) was first grown inside of a MOF, known as Fe-BTC (or MIL-100 Fe). Next, a small thiol-containing molecule, 2,3-dimercapto-1-propanol (DIP), was grafted to the PDA via a Michael addition. After the modification of the PDA, the Pt adsorption capacity and selectivity were greatly enhanced, particularly in the low concentration regime, due to the high affinity of the thiols towards Pt. Moreover, the modified composite was found to be highly selective for precious metals (Pt, Pd, and Au) over common base metals found in electronic waste (i.e., Pb, Cu, Ni, and Zn). X-ray photoelectron spectroscopy (XPS) and in situ X-ray absorption spectroscopy (XAS) provided insight into the Pt adsorption/reduction process. Last, the PSM was extended to various thiols to demonstrate the versatility of the chemistry. It is hoped that this work will open pathways for the future design of novel adsorbents that are fine-tuned for the rapid, selective retrieval of high-value and/or critical metals from complex liquids.

How Reproducible is the Synthesis of Zr-Porphyrin Metal-Organic Frameworks? An Interlaboratory Study.

Metal-organic frameworks (MOFs) are a rapidly growing class of materials that offer great promise in various applications. However, the synthesis remains challenging: for example, a range of crystal structures can often be accessed from the same building blocks, which complicates the phase selectivity. Likewise, the high sensitivity to slight changes in synthesis conditions may cause reproducibility issues. This is crucial, as it hampers the research and commercialization of affected MOFs. Here, it presents the first-ever interlaboratory study of the synthetic reproducibility of two Zr-porphyrin MOFs, PCN-222 and PCN-224, to investigate the scope of this problem. For PCN-222, only one sample out of ten was phase pure and of the correct symmetry, while for PCN-224, three are phase pure, although none of these show the spatial linker order characteristic of PCN-224. Instead, these samples resemble dPCN-224 (disordered PCN-224), which has recently been reported. The variability in thermal behavior, defect content, and surface area of the synthesised samples are also studied. The results have important ramifications for field of metal-organic frameworks and their crystallization, by highlighting the synthetic challenges associated with a multi-variable synthesis space and flat energy landscapes characteristic of MOFs.

A customized MOF-polymer composite for rapid gold extraction from water matrices.

With the fast-growing accumulation of electronic waste and rising demand for rare metals, it is compelling to develop technologies that can promotionally recover targeted metals, like gold, from waste, a process referred to as urban mining. Thus, there is increasing interest in the design of materials to achieve rapid, selective gold capture while maintaining high adsorption capacity, especially in complex aqueous-based matrices. Here, a highly porous metal-organic framework (MOF)-polymer composite, BUT-33-poly(para-phenylenediamine) (PpPD), is assessed for gold extraction from several matrices including river water, seawater, and leaching solutions from CPUs. BUT-33-PpPD exhibits a record-breaking extraction rate, with high Au3+ removal efficiency (>99%) within seconds (less than 45 s), a competitive capacity (1600 mg/g), high selectivity, long-term stability, and recycling ability. Furthermore, the high porosity and redox adsorption mechanism were shown to be underlying reasons for the material's excellent performance. Given the accumulation of recovered metallic gold nanoparticles inside, the material was also efficiently applied as a catalyst.

Unconventional, highly selective CO2 adsorption in zeolite SSZ-13.

Low-pressure adsorption of carbon dioxide and nitrogen was studied in both acidic and copper-exchanged forms of SSZ-13, a zeolite containing an 8-ring window. Under ideal conditions for industrial separations of CO(2) from N(2), the ideal adsorbed solution theory selectivity is >70 in each compound. For low gas coverage, the isosteric heat of adsorption for CO(2) was found to be 33.1 and 34.0 kJ/mol for Cu- and H-SSZ-13, respectively. From in situ neutron powder diffraction measurements, we ascribe the CO(2) over N(2) selectivity to differences in binding sites for the two gases, where the primary CO(2) binding site is located in the center of the 8-membered-ring pore window. This CO(2) binding mode, which has important implications for use of zeolites in separations, has not been observed before and is rationalized and discussed relative to the high selectivity for CO(2) over N(2) in SSZ-13 and other zeolites containing 8-ring windows.