Pheromone-inducible expression vectors for fission yeast Schizosaccharomyces pombe.

The fission yeast Schizosaccharomyces pombe is an attractive host for heterologous gene expression. However, expression systems for industrially viable large-scale fermentations are scarce. Several inducible expression vectors for S. pombe have been reported, with the strong thiamine-repressible nmt1+ promoter or derivatives thereof most commonly employed. Previously, the promoter regions of the genes sxa2+ and rep1+ were utilized to couple pheromone signaling to the expression of reporter genes for quantitative assessment of the cellular response to mating pheromones. Here, we exploit these promoters to serve as highly effective, plasmid-based inducible expression systems for S. pombe. Simply by adding synthetic P-factor pheromone, both promoters conferred 50-60% higher peak expression levels than the nmt1+ promoter. Full induction was significantly faster than observed for nmt1+-based expression platforms. Furthermore, the sxa2+ promoter showed very low basal activity and an overall 584-fold induction by synthetic P-factor pheromone. The dose-response curves of both promoters were assessed, providing the opportunity for facile tuning of the expression level by modulating P-factor concentration. Since the expression plasmids relying on the sxa2+ and rep1+ promoters require neither medium exchange nor glucose/thiamine starvation, they proved to be very convenient in handling. Hence, these expression vectors will improve the palette of valuable genetic tools for S. pombe, applicable to both basic research and biotechnology.

Tuning the Sensitivity of the PDR5 Promoter-Based Detection of Diclofenac in Yeast Biosensors.

The commonly used drug diclofenac is an important environmental anthropogenic pollutant. Currently, detection of diclofenac is mainly based on chemical and physical methods. Here we describe a yeast biosensor that drives the diclofenac-dependent expression of a recombinant fluorescent protein from the authentic promoter of the PDR5 gene. This key component of the pleiotropic drug response encodes a multidrug transporter that is involved in cellular detoxification. We analyse the effects on diclofenac sensitivity of artificial PDR5 promoter derivatives in wild-type and various yeast mutant strains. This approach enabled us to generate sensor strains with elevated drug sensitivity.

Protein kinase Ymr291w/Tda1 is essential for glucose signaling in saccharomyces cerevisiae on the level of hexokinase isoenzyme ScHxk2 phosphorylation*.

The enzyme ScHxk2 of Saccharomyces cerevisiae is a dual-function hexokinase that besides its catalytic role in glycolysis is involved in the transcriptional regulation of glucose-repressible genes. Relief from glucose repression is accompanied by the phosphorylation of the nuclear fraction of ScHxk2 at serine 15 and the translocation of the phosphoenzyme into the cytosol. Different studies suggest different serine/threonine protein kinases, Ymr291w/Tda1 or Snf1, to accomplish ScHxk2-S15 phosphorylation. The current paper provides evidence that Ymr291w/Tda1 is essential for that modification, whereas protein kinases Ydr477w/Snf1, Ynl307c/Mck1, Yfr014c/Cmk1, and Ykl126w/Ypk1, which are co-purified during Ymr291w/Tda1 tandem affinity purification, as well as protein kinase PKA and PKB homolog Sch9 are dispensable. Taking into account the detection of a significantly higher amount of the Ymr291w/Tda1 protein in cells grown in low-glucose media as compared with a high-glucose environment, Ymr291w/Tda1 is likely to contribute to glucose signaling in S. cerevisiae on the level of ScHxk2-S15 phosphorylation in a situation of limited external glucose availability. The evolutionary conservation of amino acid residue serine 15 in yeast hexokinases and its phosphorylation is illustrated by the finding that YMR291W/TDA1 of S. cerevisiae and the homologous KLLA0A09713 gene of Kluyveromyces lactis allow for cross-complementation of the respective protein kinase single-gene deletion strains.

Hydrophobin-Based Surface Engineering for Sensitive and Robust Quantification of Yeast Pheromones.

Detection and quantification of small peptides, such as yeast pheromones, are often challenging. We developed a highly sensitive and robust affinity-assay for the quantification of the α-factor pheromone of Saccharomyces cerevisiae based on recombinant hydrophobins. These small, amphipathic proteins self-assemble into highly stable monolayers at hydrophilic-hydrophobic interfaces. Upon functionalization of solid supports with a combination of hydrophobins either lacking or exposing the α-factor, pheromone-specific antibodies were bound to the surface. Increasing concentrations of the pheromone competitively detached the antibodies, thus allowing for quantification of the pheromone. By adjusting the percentage of pheromone-exposing hydrophobins, the sensitivity of the assay could be precisely predefined. The assay proved to be highly robust against changes in sample matrix composition. Due to the high stability of hydrophobin layers, the functionalized surfaces could be repeatedly used without affecting the sensitivity. Furthermore, by using an inverse setup, the sensitivity was increased by three orders of magnitude, yielding a novel kind of biosensor for the yeast pheromone with the lowest limit of detection reported so far. This assay was applied to study the pheromone secretion of diverse yeast strains including a whole-cell biosensor strain of Schizosaccharomyces pombe modulating α-factor secretion in response to an environmental signal.

A yeast pheromone-based inter-species communication system.

We report on a pheromone-based inter-species communication system, allowing for a controlled cell-cell communication between the two species Saccharomyces cerevisiae and Schizosaccharomyces pombe as a proof of principle. It exploits the mating response pathways of the two yeast species employing the pheromones, α- or P-factor, as signaling molecules. The authentic and chimeric pheromone-encoding genes were engineered to code for the P-factor in S. cerevisiae and the α-factor in S. pombe. Upon transformation of the respective constructs, cells were enabled to express the mating pheromone of the opposite species. The supernatant of cultures of S. pombe cells expressing α-factor were able to induce a G1 arrest in the cell cycle, a change in morphology to the typical shmoo effect and expression driven by the pheromone-responsive FIG1 promoter in S. cerevisiae. The supernatant of cultures of S. cerevisiae cells expressing P-factor similarly induced cell cycle arrest in G1, an alteration in morphology typical for mating as well as the activation of the pheromone-responsive promoters of the rep1 and sxa2 genes in a pheromone-hypersensitive reporter strain of S. pombe. Apparently, both heterologous pheromones were correctly processed and secreted in an active form by the cells of the other species. Our data clearly show that the species-specific pheromone systems of yeast species can be exploited for a controlled inter-species communication.

Saccharomyces cerevisiae porin pore forms complexes with mitochondrial outer membrane proteins Om14p and Om45p.

Numerous transport processes occur between the two mitochondrial (mt) membranes due to the diverse functions and metabolic processes of the mt organelle. The metabolite and ion transport through the mt outer membrane (OM) is widely assumed to be mediated by the porin pore, whereas in the mt inner membrane (IM) specific carriers are responsible for transport processes. Here, we provide evidence by means of Blue Native (BN)-PAGE analysis, co-immunoprecipitation, and tandem affinity purification that the two mt OM proteins Om14p and Om45p associate with the porin pore. Porin molecules seem to assemble independently to build the core unit. A subpopulation of these core units interacts with Om14p and Om45p. With preparative tandem affinity purification followed by MS analysis, we could identify interaction partners of this OM complex, which are mainly localized within the mt IM and function as carriers for diverse molecules. We propose a model for the role of the two OM proteins in addressing the porin pore to bind to specific channels in the mt IM to facilitate transport of metabolites.

Overexpression of ctr1Δ300, a high-affinity copper transporter with deletion of the cytosolic C-terminus in Saccharomyces cerevisiae under excess copper, leads to disruption of transition metal homeostasis and transcriptional remodelling of cellular processes.

In an approach to generating Saccharomyces cerevisiae strains with increased intracellular copper amounts for technical applications, we overexpressed the copper transporter CTR1 and a variant of CTR1 with a truncation in the C-terminus after the 300th amino acid (ctr1Δ300). We determined the copper sensitivity of the generated strains and used inductively coupled plasma spectrometry analysis (ICP-OES and ICP-MS) to investigate the effects of overexpression of both constructs under excess copper on the cellular content of different elements in S. cerevisiae. In addition, we performed DNA microarray analysis to obtain the gene expression profile under the changed element contents. Overexpression of CTR1 increased the copper content in the cells to 160% and 78 genes were differentially regulated. Overexpression of the truncated ctr1Δ300 resulted in an increased copper, iron and zinc content of > 200% and 980 genes showed differential expression. We found that transition metal ion homeostasis was disrupted in ctr1Δ300-overexpressing strains under excess copper and that this was combined with a transcriptional remodelling of cellular processes.

Temporal and spatial properties of a yeast multi-cellular amplification system based on signal molecule diffusion.

We report on the spatial and temporal signaling properties of a yeast pheromone-based cell communication and amplifier system. It utilizes the Saccharomyces cerevisiae mating response pathway and relies on diffusion of the pheromone α-factor as key signaling molecule between two cell types. One cell type represents the α-factor secreting sensor part and the other the reporter part emitting fluorescence upon activation. Although multi-cellular signaling systems promise higher specificity and modularity, the complex interaction of the cells makes prediction of sensor performance difficult. To test the maximum distance and response time between sensor and reporter cells, the two cell types were spatially separated in defined compartments of agarose hydrogel (5 x 5 mm) and reconnected by diffusion of the yeast pheromone. Different ratios of sensor to reporter cells were tested to evaluate the minimum amount of sensor cells required for signal transduction. Even the smallest ratio, one α-factor-secreting cell to twenty reporter cells, generated a distinct fluorescence signal. When using a 1:1 ratio, the secreted pheromone induced fluorescence in a distance of up to four millimeters after six hours. We conclude from both our experimental results and a mathematical diffusion model that in our approach: (1) the maximum dimension of separated compartments should not exceed five millimeters in gradient direction; and (2) the time-limiting step is not diffusion of the signaling molecule but production of the reporter protein.

Production, secretion, and cell surface display of recombinant Sporosarcina ureae S-layer fusion proteins in Bacillus megaterium.

Monomolecular crystalline bacterial cell surface layers (S-layers) have broad application potential in nanobiotechnology due to their ability to generate functional supramolecular structures. Here, we report that Bacillus megaterium is an excellent host organism for the heterologous expression and efficient secretion of hemagglutinin (HA) epitope-tagged versions of the S-layer protein SslA from Sporosarcina ureae ATCC 13881. Three chimeric proteins were constructed, comprising the precursor, C-terminally truncated, and N- and C-terminally truncated forms of the S-layer SslA protein tagged with the human influenza hemagglutinin epitope. For secretion of fusion proteins, the open reading frames were cloned into the Escherichia coli-Bacillus megaterium shuttle vector pHIS1525. After transformation of the respective plasmids into Bacillus megaterium protoplasts, the recombinant genes were successfully expressed and the proteins were secreted into the growth medium. The isolated S-layer proteins are able to assemble in vitro into highly ordered, crystalline, sheetlike structures with the fused HA tag accessible to antibody. We further show by fluorescent labeling that the secreted S-layer fusion proteins are also clustered on the cell envelope of Bacillus megaterium, indicating that the cell surface can serve in vivo as a nucleation point for crystallization. Thus, this system can be used as a display system that allows the dense and periodic presentation of S-layer proteins or the fused tags.

Layer thickness of hydrophobin films leads to oscillation in wettability.

In nanobiotechnology, the properties of surfaces are often key to sensor applications. If analytes possess a low tolerance or affinity regarding the sensory substrate (surface), then the setup of mediators may be indicated. Hydrophobins enable biocompatible surface functionalization without significant restrictions of the physicochemical substrate properties. Because of the imperfect formation of hydrophobin films, a high variation in surface properties is observed. In this study, we report on the relation between the film thickness of hydrophobin-coated solid surfaces and their wettability. We found that the wettability of protein-coated surfaces strictly depends on the amount of adsorbed protein, as reflected in an oscillation of the contact angles of hydrophobin-coated silicon wafers. Fusion proteins of Ccg2 and HFBI, representatives of class I and II hydrophobins, document the influence of fused peptide tags on the wettability. The orientation of the first crystal nuclei plays a decisive role in the formation of the growing hydrophobin layers. Here, a simple method of deducing the film thickness of hydrophobin assemblies on solid surfaces is presented. The determination of the static contact angle allows the prediction of which part of the protein is exposed to possible analytes.

Nested Formation of Calcium Carbonate Polymorphs in a Bacterial Surface Membrane with a Graded Nanoconfinement: An Evolutionary Strategy to Ensure Bacterial Survival.

It is the intention of this study to elucidate the nested formation of calcium carbonate polymorphs or polyamorphs in the different nanosized compartments. With these observations, it can be concluded how the bacteria can survive in a harsh environment with high calcium carbonate supersaturation. The mechanisms of calcium carbonate precipitation at the surface membrane and at the underlying cell wall membrane of the thermophilic soil bacterium Geobacillus stearothermophilus DSM 13240 have been revealed by high-resolution transmission electron microscopy and atomic force microscopy. In this Gram-positive bacterium, nanopores in the surface layer (S-layer) and in the supporting cell wall polymers are nucleation sites for metastable calcium carbonate polymorphs and polyamorphs. In order to observe the different metastable forms, various reaction times and a low reaction temperature (4 °C) have been chosen. Calcium carbonate polymorphs nucleate in the confinement of nanosized pores (⌀ 3-5 nm) of the S-layer. The hydrous crystalline calcium carbonate (ikaite) is formed initially with [110] as the favored growth direction. It transforms into the anhydrous metastable vaterite by a solid-state transition. In a following reaction step, calcite is precipitated, caused by dissolution of vaterite in the aqueous solution. In the larger pores of the cell wall (⌀ 20-50 nm), hydrated amorphous calcium carbonate is grown, which transforms into metastable monohydrocalcite, aragonite, or calcite. Due to the sequence of reaction steps via various metastable phases, the bacteria gain time for chipping the partially mineralized S-layer, and forming a fresh S-layer (characteristic growth time about 20 min). Thus, the bacteria can survive in solutions with high calcium carbonate supersaturation under the conditions of forced biomineralization.

HCC1, the Arabidopsis homologue of the yeast mitochondrial copper chaperone SCO1, is essential for embryonic development.

The Arabidopsis HCC1 gene is a homologue of the copper chaperone SCO1 from the yeast Saccharomyces cerevisiae. SCO1 (synthesis of cytochrome c oxidase 1) encodes a mitochondrial protein that is essential for the correct assembly of complex IV in the respiratory chain. GUS analyses showed HCC1 promoter activity in vascular tissue, guard cells, hydathodes, trichome support cells, and embryos. HCC1 function was studied in two hcc1 T-DNA insertion lines, hcc1-1 and hcc1-2. Gametophyte development was not affected by the disruption of HCC1, but homozygous hcc1-1 and hcc1-2 embryos became arrested at various developmental stages, mostly at the heart stage. Both the wild-type HCC1 gene and the modified gene coding for the C-terminally SNAP-tagged HCC1 were able to complement the embryo-lethal phenotype of the hcc1-1 line. Localization of the SNAP-tagged HCC1 in transgenic lines identified HCC1 as a mitochondrial protein. To determine if HCC1 is a functional homologue to Sco1p, the respiratory-deficient yeast sco1 mutant was transformed with chimeric constructs containing different combinations of HCC1 and SCO1 sequences. One of the resulting chimeric proteins restored respiration in the yeast mutant. This protein had the N-terminal mitochondrial targeting signal and the single transmembrane domain derived from Sco1p and the C-terminal half (including the copper-binding motif) derived from HCC1. Growth of the complemented yeast mutant was enhanced by the addition of copper to the medium. The data demonstrate that HCC1 is essential for embryo development in Arabidopsis, possibly due to its role in cytochrome c oxidase assembly.

Formation of tubes during self-assembly of bacterial surface layers.

Based on experimental studies on tube formation during self-assembly of bacterial surface (S)-layers, a mechanistic model for describing the underlying basic mechanisms is proposed and the effect of process parameters on growth velocity and tube radius is investigated. The S-layer is modeled as a curved sheet with discrete binding sites for the association of monomers distributed along the S-layer edges. Reported changes of the tube radius owing to genetic protein modifications are explained within the framework of continuum mechanics. S-layer growth velocity and shape development are analyzed by Monte Carlo simulation in their dependence on the attachment and detachment frequencies of monomers at the S-layer. For curved S-layer patches, a criterion for the formation of S-layer tubes is derived. Accordingly, tubes can form only within a certain range of the initial monomer concentration. Furthermore, the effect of calcium ion concentration on tube formation is discussed, including recent experimental findings on the calcium effect.

Calcium dependent formation of tubular assemblies by recombinant S-layer proteins in vivo and in vitro.

Surface layer proteins have the appealing property to self-assemble in nanosized arrays in solution and on solid substrates. In this work, we characterize the formation of assembly structures of the recombinant surface layer protein SbsC of Geobacillus stearothermophilus ATTC 12980, which was tagged with enhanced green fluorescent protein and expressed in the yeast Saccharomyces cerevisiae. The tubular structures formed by the protein in vivo are retained upon bursting the cells by osmotic shock; however, their average length is decreased. During dialysis, monomers obtained by treatment with chaotropic chemicals recrystallize again to form tube-like structures. This process is strictly dependent on calcium (Ca(2+)) ions, with an optimal concentration of 10 mM. Further increase of the Ca(2+) concentration results in multiple non-productive nucleation points. We further show that the lengths of the S-layer assemblies increase with time and can be controlled by pH. After 48 h, the average length at pH 9.0 is 4.13 µm compared to 2.69 µm at pH 5.5. Successful chemical deposition of platinum indicates the potential of recrystallized mSbsC-eGFP structures for nanobiotechnological applications.

Metallization and investigation of electrical properties of in vitro recrystallized mSbsC-eGFP assemblies.

Surface layer (SL) proteins are self-assembling nanosized arrays which can be recrystallized in solution or on surfaces. In this paper, we investigate the metallization, contact potential difference and conductivity of in vitro recrystallized mSbsC-eGFP tube-like assemblies for possible applications in nanobiotechnology. Treatment of mSbsC-eGFP tube-like structures with 150 mM Pt salt solution resulted in the formation of metallized SL assemblies decorated with Pt nanoparticles (∅ > 3 nm) which were closely packed and aggregated into metal clusters. Kelvin probe force microscopy (KPFM) measurements revealed that metallized and unmetallized SL templates showed different surface potential behaviours, demonstrating that the metal coating changes the electrostatic surface characteristics of SL assemblies. In situ conductivity measurements showed that unmetallized SL assemblies were not conductive. Metallized samples showed linear I-V dependence between - 1 and + 1 V with a conductivity of ∼ 10(3) S m( - 1).

Hydrophobin signal sequence mediates efficient secretion of recombinant proteins in Pichia pastoris.

Pichia pastoris is an important eukaryotic organism for the expression, processing, and secretion of recombinant proteins. Here, the secretion of enhanced green fluorescent protein (EGFP) in P. pastoris by using three novel secretion signals originating from the HFBI and HFBII class 2 hydrophobins of Trichoderma reesei was investigated. EGFP was fused to the carboxyl terminus of hydrophobin secretion signals and expressed under the control of the constitutive GAP promoter. In every case, recombinant EGFP entered the secretory pathway of P. pastoris. SDS-polyacrylamide gel electrophoresis, Western blot analysis of the cells' supernatant, and fluorescence measurements on single-cell level via flow cytometry confirmed the efficient secretion of EGFP mediated by the novel secretion sequences. In conclusion, the data clearly show that the secretion sequences derived from HFBI and HFBII of T. reesei have the potential to achieve an efficient secretion of heterologous proteins in P. pastoris. Due to the small size of the hydrophobin-derived secretion signals, their coding sequence can be easily introduced to the gene of interest by PCR.

Interaction and interrelation of P2X7 and P2X4 receptor complexes in mouse lung epithelial cells.

P2X4 and P2X7 receptors are ATP-gated ion channels that are co-expressed in alveolar epithelial type I cells. Both receptors are localized to the plasma membrane and partly associated with lipid rafts. Here we report on our study in an alveolar epithelial cell line of the molecular organization of P2X7R and P2X4R receptors and the effect of their knockdown. Native gel electrophoresis reveals three P2X7R complexes of approximately 430, approximately 580 and approximately 760 kDa. The latter two correspond exactly in size to signals of Cav-1, the structural protein of caveolae. Interestingly knockdown of P2rx7 affects protein levels, the intracellular distribution and the supramolecular organization of Cav-1 as well as of P2X4R, which is mainly detected in a complex of approximately 430 kDa. Our data suggest upregulation of P2X4R as a compensatory mechanism of P2X7R depletion.

Expression and assembly of recombinant surface layer proteins in Saccharomyces cerevisiae.

Most bacterial surface layers (SLs) are formed by self-assembly of a single type of protein. Native and recombinant surface layer monomers are capable to self-assemble on solid substrates and in solution to highly regular nanosized arrays which make them attractive for nanobiotechnological applications. In this study, we expressed the surface layer protein SbsC of Bacillus stearothermophilus ATTC 12980, tagged with Enhanced Green Fluorescent Protein, in the yeast Saccharomyces cerevisiae. We observed a network of tubular structures in the cytosol of the transformed yeast cells that did not colocalize with microtubules or the actin cytoskeleton. Time-resolved analysis of the formation of these structures during vegetative growth and sporulation was investigated by live fluorescence microscopy. While in meiosis ascospores seemed to receive assembled structures from the diploid cells, during mitosis, SL structures were formed de novo in the buds. SL assembly always started with the appearance of a dot-like structure in the cytoplasm, suggesting a single nucleation point.

A fluorescence-based yeast sensor for monitoring acetic acid.

Accumulation of acetic acid indicates an imbalance of the process due to a disturbed composition of the microorganisms. Hence, monitoring the acetic acid concentration is an important parameter to control the biogas process. Here, we describe the generation and validation of a fluorescence-based whole cell sensor for the detection of acetic acid based on the yeast Saccharomyces cerevisiae. Acetic acid induces the transcription of a subset of genes. The 5´-regulatory sequences (5´ URS) of these genes were cloned into a multicopy plasmid to drive the expression of a red fluorescent reporter gene. The 5´ URS of YGP1, encoding a cell wall-related glycoprotein, led to a 20-fold increase of fluorescence upon addition of 30 mM acetic acid to the media. We show that the system allows estimating the approximate concentration of acetic acid in condensation samples from a biogas plant. To avoid plasmid loss and increase the long-term stability of the sensor, we integrated the reporter construct into the yeast genome and tested the suitability of spores for long-term storage of sensor cells. Lowering the reporter gene's copy number resulted in a significant drop of the fluorescence, which can be compensated by applying a yeast pheromone-based signal amplification system.