First Report of Candidatus Phytoplasma asteris (16SrI-B Subgroup) associated with phyllody disease of moth bean in world.

Moth bean (Vigna aconitifolia), a drought and heat-resistant legume from the Fabaceae family, is commonly cultivated in arid and semi-arid regions of the Indian subcontinent In September 2022, phyllody symptoms (Figure 1) were observed on 50-days-old moth bean plants at the ICAR-NBPGR research farm in Jodhpur, Rajasthan, India. The disease incidence ranged from 10 to 25%. To investigate the cause, ten symptomatic VacoJod (1-10) and ten asymptomatic VacoJod (11-20) Vigna aconitifolia plants were collected. Insect populations were also collected from the vicinity using the sweep-net method to examine the role of insect vectors. The leafhopper was identified based on morphological characterization as Empoasca sp. at the Division of Entomology, ICAR-IARI, New Delhi. DNA was extracted from midribs of all collected plants and the Empoasca sp., using Qiagen DNeasy Plant Mini Kit and Blood and Tissue kit, respectively. Nested polymerase chain reaction (Nested-PCR) with universal primers P1/P7 and R16F2n/R16R2 (Deng and Hiruki, 1991; Gundersen and Lee, 1996), and secA gene primers (secAfor1/secArev3 and secAfor2/secArev3) (Hodgetts et al., 2008) were employed to determine phytoplasma species association. Out of the 10 symptomatic plants and 10 leafhopper samples, 6 leafhopper samples and all symptomatic plants produced expected band sizes for the 16S rRNA (approximately 1.25 kb) and secA gene (480 bp). The PCR products were cloned, sequenced, and sequences (two each from moth bean and leafhopper) were submitted to NCBI GenBank with accession numbers OP941130, OP941132, OP941133 and OP941134 for 16S rRNA and OP958868, OP958869, OP958870, and OP958871 for secA gene sequences. Nucleotide BLAST analysis of 16S rRNA sequences revealed a minimum of 99.92% similarity with 'Primula acaulis' yellows phytoplasma (KJ494340) from Czech Republic. All 100% hits corresponded to 16SrI-B group phytoplasmas, for example rapeseed phyllody phytoplasma (CP055264) from Taiwan. Similarly, nucleotide BLAST analysis of secA sequences revealed a minimum of 99.15% sequence similarity with Paulownia witches'-broom phytoplasma (secA) (OP124308) from China. All 100% hits were of 16SrI-B group phytoplasmas, for example Ageratum conyzoides yellowing phytoplasma (MW401697, secA) from India. Phylogenetic analysis using MEGA11 (Tamura et al., 2021) clustered the moth bean and Empoasca sp. phytoplasma strains with 16SrI-B phytoplasma reference strains. iPhyClassifier tool classified the 16S rRNA gene sequences into 16Sr group I, subgroup B, with a similarity coefficient of 1.0 (Figure 2a, 2b). This marks the first report of the association of 'Ca. P. asteris' 16SrI-B related phytoplasma strain with moth bean plants globally. The 16SrI-B phytoplasma strain is prevalent in various crops in India (Singh et al., 2023). This report emphasizes the epidemiological studies and highlights the need for further research and preventive measures to manage the spread of this phytoplasma strain, which could impact crop production and food security in hot and dry regions.

Proposal for noise-free visible-telecom quantum frequency conversion through third-order sum and difference frequency generation.

Quantum frequency conversion (QFC) between the visible and telecom is a key to connect quantum memories in fiber-based quantum networks. Current methods for linking such widely separated frequencies, such as sum/difference frequency generation and four-wave mixing Bragg scattering, are prone to broadband noise generated by the pump laser(s). To address this issue, we propose to use third-order sum/difference frequency generation (TSFG/TDFG) for an upconversion/downconversion QFC interface. In this process, two long wavelength pump photons combine their energy and momentum to mediate frequency conversion across the large spectral gap between the visible and telecom bands, which is particularly beneficial from the noise perspective. We show that waveguide-coupled silicon nitride microring resonators can be designed for efficient QFC between 606 and 1550 nm via a 1990 nm pump through TSFG/TDFG. We simulate the device dispersion and coupling, and from the simulated parameters, estimate that the frequency conversion can be efficient (${\gt}80 \%$) at 50 mW pump power. Our results suggest that microresonator TSFG/TDFG is promising for compact, scalable, and low-power QFC across large spectral gaps.

Broadband resonator-waveguide coupling for efficient extraction of octave-spanning microcombs: publisher's note.

This publisher's note contains corrections to Opt. Lett.44, 4737 (2019) OPLEDP0146-959210.1364/OL.44.004737.

Actively-monitored periodic-poling in thin-film lithium niobate photonic waveguides with ultrahigh nonlinear conversion efficiency of 4600†%W-1cm-2.

Chip-scale implementations of second-order nonlinear optics benefit from increased optical confinement that can lead to nonlinear interaction strengths that are orders of magnitude higher than bulk free-space configurations. Here, we present thin-film-based ultraefficient periodically-poled lithium niobate nonlinear waveguides, leveraging actively-monitored ferroelectric domain reversal engineering and nanophotonic confinement. The devices exhibit up to 4600 %W-1cm-2 conversion efficiency for second-harmonic generation, pumped around 1540 nm. In addition, we measure broadband sum-frequency generation across multiple telecom bands, from 1460 to 1620 nm. As an immediate application of the devices, we use pulses of picojoule-level energy to demonstrate second-harmonic generation with over 10% conversion in a 0.6-mm-long waveguide. Our ultracompact and highly efficient devices address growing demands in integrated-photonic frequency conversion, frequency metrology, atomic physics, and quantum optics, while offering a coherent link between the telecom and visible bands.

Generation of broadband correlated photon-pairs in short thin-film lithium-niobate waveguides.

An efficient source of quantum-correlated photon-pairs that is integrable with existing silicon-electronics fabrication techniques is desirable for use in quantum photonic integrated circuits. Here we demonstrate signal-idler photon pairs with high coincidence-to-accidental count ratios of over 103 on a coarse wavelength-division-multiplexing grid that spans 140 nm by using a 300-µm-long poled region in a thin-film periodically-poled lithium-niobate ridge waveguide bonded to silicon. The pairs are generated via spontaneous parametric downconversion pumped by a continuous-wave tunable laser source. The small mode area of the waveguide allows for efficient interaction in a short length of the waveguide and, as a result, permits photon-pair generation over a broad range of signal-idler wavelengths.

Broadband resonator-waveguide coupling for efficient extraction of octave-spanning microcombs.

Octave-spanning frequency combs have been successfully demonstrated in Kerr nonlinear microresonators. These microcombs rely on both engineered dispersion, to enable generation of frequency components across the octave, and on engineered coupling, to efficiently extract the generated light into an access waveguide while maintaining a close to critically coupled pump. The latter is challenging, as the spatial overlap between the access waveguide and the ring modes decays with frequency. This leads to strong coupling variation across the octave, with poor extraction at short wavelengths. Here, we investigate how a waveguide wrapped around a portion of the resonator, in a pulley scheme, can improve the extraction of octave-spanning microcombs, in particular at short wavelengths. We use the coupled-mode theory to predict the performance of the pulley couplers and demonstrate good agreement with experimental measurements. Using an optimal pulley coupling design, we demonstrate a 20 dB improvement in extraction at short wavelengths compared to straight waveguide coupling.

Molecular characterization of 'Clover proliferation' phytoplasma subgroup-D (16SrVI-D) associated with vegetables crops in India.

Nine vegetable plants species exhibiting phytoplasma suspected symptoms of white/purple leaf, little leaf, flat stem, witches' broom, phyllody and leaf yellowing were observed in experimental fields at Indian Agricultural Research Institute, New Delhi from December 2015 to July 2016. Total DNA extracted from the three healthy and three symptomatic leaves of all the nine vegetables were subjected to PCR assays using phytoplasma specific primers P1/P7 followed by R16F2n/R16R2 and 3Far/3Rev to amplify the 16S rDNA fragments. No amplifications of DNA were observed in first round PCR assays with primer pair P1/P7 from any of the symptomatic samples. However, phytoplasma DNA specific fragments of ~ 1.3 kb were amplified from Apium graveolens L. (two isolates), Brassica oleracea vr. capitata L. (one isolate) and Solanum melongena L. (one isolate) by using 3Far/3Rev primer pair and 1.2 kb fragment was amplified from Lactuca sativa L. (one isolate) by using R16F2n/R16R2 primer pair. No DNA amplification was seen in other symptomatic vegetable samples of tomato, carrot, cucurbit, bitter gourd and Amaranthus species utilizing either P1/P7 primer pair followed by 3Far/3Rev or R16F2n/R16R2 primer pairs. Out of three leafhopper species collected from the symptomatic vegetable fields, only Hishimonus phycitis was found positive for association of phytoplasma. No DNA amplifications were observed in healthy plant samples and insects collected from non-symptomatic fields. Comparative sequence comparison analyses of 16S rDNA of positive found vegetable phytoplasma strains revealed 100% sequence identities among each other and with phytoplasma strains of 'clover proliferation' (16SrVI) group. Phytoplasma sequences, virtual RFLPs and phylogenetic analyses of 16S rDNA sequence comparison confirmed the identification of 16SrVI subgroup D strain of phytoplasmas in four vegetables and one leafhopper (HP) species. Further virtual RFLP analysis of 16S rDNA sequence of the vegetables phytoplasma strains confirmed their taxonomic classification with strains of 'clover proliferation' subgroup D. Since, H. phycitis feeding on symptomatic vegetable species in the study was also tested positive for the 16SrVI phytoplasma subgroup-D as of vegetables; it may act as potent natural reservoir of 16SrVI-D subgroup of phytoplasmas infecting vegetable and other important agricultural crops.

Second-harmonic generation in periodically-poled thin film lithium niobate wafer-bonded on silicon.

Second-order optical nonlinear effects (second-harmonic and sum-frequency generation) are demonstrated in the telecommunication band by periodic poling of thin films of lithium niobate wafer-bonded on silicon substrates and rib-loaded with silicon nitride channels to attain ridge waveguide with cross-sections of ~2 µm2. A nonlinear conversion of 8% is obtained with a pulsed input in 4 mm long waveguides. The choice of silicon substrate makes the platform potentially compatible with silicon photonics, and therefore may pave the path towards on-chip nonlinear and quantum-optic applications.

High-performance and linear thin-film lithium niobate Mach-Zehnder modulators on silicon up to 50 GHz.

Compact electro-optical modulators are demonstrated on thin films of lithium niobate on silicon operating up to 50 GHz. The half-wave voltage length product of the high-performance devices is 3.1 V.cm at DC and less than 6.5 V.cm up to 50 GHz. The 3 dB electrical bandwidth is 33 GHz, with an 18 dB extinction ratio. The third-order intermodulation distortion spurious free dynamic range is 97.3 dBHz2/3 at 1 GHz and 92.6 dBHz2/3 at 10 GHz. The performance demonstrated by the thin-film modulators is on par with conventional lithium niobate modulators but with lower drive voltages, smaller device footprints, and potential compatibility for integration with large-scale silicon photonics.

Heterogeneous microring and Mach-Zehnder modulators based on lithium niobate and chalcogenide glasses on silicon.

Thin films of lithium niobate are wafer bonded onto silicon substrates and rib-loaded with a chalcogenide glass, Ge(23)Sb(7)S(70), to demonstrate strongly confined single-mode submicron waveguides, microring modulators, and Mach-Zehnder modulators in the telecom C band. The 200 µm radii microring modulators present 1.2 dB/cm waveguide propagation loss, 1.2 × 10(5) quality factor, 0.4 GHz/V tuning rate, and 13 dB extinction ratio. The 6 mm long Mach-Zehnder modulators have a half-wave voltage-length product of 3.8 V.cm and an extinction ratio of 15 dB. The demonstrated work is a key step towards enabling wafer scale dense on-chip integration of high performance lithium niobate electro-optical devices on silicon for short reach optical interconnects and higher order advanced modulation schemes.

Low-loss and high index-contrast tantalum pentoxide microring resonators and grating couplers on silicon substrates.

A platform for high index-contrast integrated photonics based on tantalum pentoxide submicrometer waveguides on silicon substrates is introduced. The platform allows demonstration of microring resonators with loaded quality factor, Q, of 67,000 and waveguides with a propagation loss of 4.9 dB/cm. Grating couplers, with an insertion loss of ~6 dB per coupler and 3 dB bandwidth of ~50 nm, are also demonstrated and integrated with microring resonators.

Efficient photo-induced second harmonic generation in silicon nitride photonics.

Silicon photonics lacks a second-order nonlinear optical (χ(2)) response in general because the typical constituent materials are centro-symmetric and lack inversion symmetry, which prohibits χ(2) nonlinear processes such as second harmonic generation (SHG). Here, we realize record-high SHG efficiency in silicon photonics by combining a photo-induced effective χ(2) nonlinearity with resonant enhancement and perfect-phase matching. We show a conversion efficiency of (2,500 ± 100) %/W, which is 2 to 4 orders of magnitude larger than previous field-induced SHG works. In particular, our devices realize milliwatt-level SHG output powers with up to (22 ± 1) % power conversion efficiency. This demonstration is a major breakthrough in realizing efficient χ(2) processes in silicon photonics, and paves the way for further integration of self-referenced frequency combs and optical frequency references.

Towards integrated photonic interposers for processing octave-spanning microresonator frequency combs.

Microcombs-optical frequency combs generated in microresonators-have advanced tremendously in the past decade, and are advantageous for applications in frequency metrology, navigation, spectroscopy, telecommunications, and microwave photonics. Crucially, microcombs promise fully integrated miniaturized optical systems with unprecedented reductions in cost, size, weight, and power. However, the use of bulk free-space and fiber-optic components to process microcombs has restricted form factors to the table-top. Taking microcomb-based optical frequency synthesis around 1550 nm as our target application, here, we address this challenge by proposing an integrated photonics interposer architecture to replace discrete components by collecting, routing, and interfacing octave-wide microcomb-based optical signals between photonic chiplets and heterogeneously integrated devices. Experimentally, we confirm the requisite performance of the individual passive elements of the proposed interposer-octave-wide dichroics, multimode interferometers, and tunable ring filters, and implement the octave-spanning spectral filtering of a microcomb, central to the interposer, using silicon nitride photonics. Moreover, we show that the thick silicon nitride needed for bright dissipative Kerr soliton generation can be integrated with the comparatively thin silicon nitride interposer layer through octave-bandwidth adiabatic evanescent coupling, indicating a path towards future system-level consolidation. Finally, we numerically confirm the feasibility of operating the proposed interposer synthesizer as a fully assembled system. Our interposer architecture addresses the immediate need for on-chip microcomb processing to successfully miniaturize microcomb systems and can be readily adapted to other metrology-grade applications based on optical atomic clocks and high-precision navigation and spectroscopy.

Ultra-broadband Kerr microcomb through soliton spectral translation.

Broadband and low-noise microresonator frequency combs (microcombs) are critical for deployable optical frequency measurements. Here we expand the bandwidth of a microcomb far beyond its anomalous dispersion region on both sides of its spectrum through spectral translation mediated by mixing of a dissipative Kerr soliton and a secondary pump. We introduce the concept of synthetic dispersion to qualitatively capture the system's key physical behavior, in which the second pump enables spectral translation through four-wave mixing Bragg scattering. Experimentally, we pump a silicon nitride microring at 1063 nm and 1557 nm to enable soliton spectral translation, resulting in a total bandwidth of 1.6 octaves (137-407 THz). We examine the comb's low-noise characteristics, through heterodyne beat note measurements across its spectrum, measurements of the comb tooth spacing in its primary and spectrally translated portions, and their relative noise. These ultra-broadband microcombs provide new opportunities for optical frequency synthesis, optical atomic clocks, and reaching previously unattainable wavelengths.

On-chip optical parametric oscillation into the visible: generating red, orange, yellow, and green from a near-infrared pump.

The on-chip generation of coherent, single-frequency laser light that can be tuned across the visible spectrum would help enable a variety of applications in spectroscopy, metrology, and quantum science. Recently, third-order optical parametric oscillation (OPO) in a microresonator has shown great promise as an efficient and scalable approach towards this end. However, considering visible light generation, so far only red light at < 420 THz (near the edge of the visible band) has been reported. In this work, we overcome strong material dispersion at visible wavelengths and demonstrate on-chip OPO in a Si3N4 microresonator covering >130 THz of the visible spectrum, including red, orange, yellow, and green wavelengths. In particular, using an input pump laser that is scanned 5 THz in the near-infrared from 386 THz to 391 THz, the OPO output signal is tuned from the near-infrared at 395 THz to the visible at 528 THz, while the OPO output idler is tuned from the near-infrared at 378 THz to the infrared at 254 THz. The widest signal-idler separation of 274 THz is more than an octave in span and is the widest demonstrated for a nanophotonic OPO to date. More generally, our work shows how nonlinear nanophotonics can transform light from readily accessible compact near-infrared lasers to targeted visible wavelengths of interest.

Aleurothrixus trachoides (Back) can transmit begomovirus from Duranta to potato, tomato and bell pepper.

Solanum whitefly, Aleurothrixus trachoides (Back). (Hemiptera: Aleyrodidae) was considered as a non-virus vector by European and Mediterranean Plant Protection Organization (EPPO) reports. However, in the present study it was found to transmit Duranta leaf curl virus (DLCV) to tomato, bell pepper and potato. A. trachoides infested field samples of Duranta sp (100%) and tomato (20%) tested positive for begomovirus by PCR using begomovirus degenerate primers and primers specific to Tomato leaf curl New Delhi virus showing amplicon of 520 bp and 2.7 Kb respectively. The DNA samples of A. trachoides collected from virus positive duranta and tomato plants also tested positive for the virus. Virulent whiteflies from duranta could successfully transmit DLCV to bell pepper (26%) and tomato (13 %) plants as confirmed by Rolling Circle Amplification. The rate of virus transmission by A. trachoides from DLCV inoculated tomato to bell pepper and tomato to potato was 100% and tomato to tomato was 80%. The results suggest whitefly A. trachoides as the vector for DLCVand to the best of our knowledge, this is the first report for A. trachoides as vector of begomovirus. These findings suggest need for reconsideration of A. trachoides as a virus-vector. This will have great impact on solanaceous vegetable cultivation in India and other parts of the world.

A universal frequency engineering tool for microcavity nonlinear optics: multiple selective mode splitting of whispering-gallery resonances.

Whispering-gallery microcavities have been used to realize a variety of efficient parametric nonlinear optical processes through the enhanced light-matter interaction brought about by supporting multiple high quality factor and small modal volume resonances. Critical to such studies is the ability to control the relative frequencies of the cavity modes, so that frequency matching is achieved to satisfy energy conservation. Typically this is done by tailoring the resonator cross-section. Doing so modifies the frequencies of all of the cavity modes, that is, the global dispersion profile, which may be undesired, for example, in introducing competing nonlinear processes. Here, we demonstrate a frequency engineering tool, termed multiple selective mode splitting (MSMS), that is independent of the global dispersion and instead allows targeted and independent control of the frequencies of multiple cavity modes. In particular, we show controllable frequency shifts up to 0.8 nm, independent control of the splitting of up to five cavity modes with optical quality factors ≳ 105, and strongly suppressed frequency shifts for untargeted modes. The MSMS technique can be broadly applied to a wide variety of nonlinear optical processes across different material platforms, and can be used to both selectively enhance processes of interest and suppress competing unwanted processes.

One-year follow-up of efficacy and cost of repeated doses versus single larger dose of intra-articular hyaluronic acid for knee osteoarthritis.

PURPOSE: A recent 3-month randomized, open-label controlled trial found that the intra-articular hyaluronic acid injection (GO-ON®) given as a single dose of 5 mL is as effective and safe as three repeated doses of 2.5 mL in patients with knee osteoarthritis. However, the information on the long-term efficacy and economic implications of the single-dose regimen is still limited. Hence, this follow-up study was designed to compare the effectiveness and costs of the two regimens 12 months following the treatment. METHODS: All the 127 patients, who received either three repeated doses (n = 64) or a single dose (n = 63) of GO-ON in the previous trial, were followed up in month 12 following the treatment. The effectiveness of both the regimens was assessed using the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and the mean WOMAC scores were compared with those recorded at the baseline and in month 3. Additionally, the total treatment costs of the two regimens, taking account of both direct and indirect costs, were computed and compared. RESULTS: A total of 125 patients (98.4%) completed the assessment. Despite the reduction of the overall mean WOMAC score from 39.24 to 19.93 (p < 0.001) in the first 3 months following the treatment with GO-ON, no further changes were observed up to month 12 (p > 0.95). In the meantime, the two regimens did not differ in the mean WOMAC scores (p = 0.749) and in the subscale scores for pain (p = 0.970), stiffness (p = 0.526), and physical functioning (p = 0.667) in month 12. The cost for single-dose injection was found to be approximately 30% lower compared to the repeated doses. CONCLUSION: These findings indicate that the single larger dose of GO-ON is as effective as the repeated doses over 12 months, and yet the total treatment cost is lowered.

Kerr Microresonator Soliton Frequency Combs at Cryogenic Temperatures.

We investigate the accessibility and projected low-noise performance of single soliton Kerr frequency combs in silicon nitride microresonators enabled by operating at cryogenic temperatures as low as 7 K. The resulting two orders of magnitude reduction in the thermo-refractive coefficient relative to room-temperature enables direct access to single bright Kerr soliton states through adiabatic frequency tuning of the pump laser while remaining in thermal equilibrium. Our experimental results, supported by theoretical modeling, show that single solitons are easily accessible at temperatures below 60 K for the microresonator device under study. We further demonstrate that the cryogenic temperature primarily impacts the thermo-refractive coefficient. Other parameters critical to the generation of solitons, such as quality factor, dispersion, and effective nonlinearity, are unaltered. Finally, we discuss the potential improvement in thermo-refractive noise resulting from cryogenic operation. The results of this study open up new directions in advancing chip-scale frequency comb optical clocks and metrology at cryogenic temperatures.

Milliwatt-threshold visible-telecom optical parametric oscillation using silicon nanophotonics.

The on-chip creation of coherent light at visible wavelengths is crucial to field-level deployment of spectroscopy and metrology systems. Although on-chip lasers have been implemented in specific cases, a general solution that is not restricted by limitations of specific gain media has not been reported. Here, we propose creating visible light from an infrared pump by widely-separated optical parametric oscillation (OPO) using silicon nanophotonics. The OPO creates signal and idler light in the 700 nm and 1300 nm bands, respectively, with a 900 nm pump. It operates at a threshold power of (0.9 ± 0.1) mW, over 50× smaller than other widely-separated microcavity OPO works, which have only been reported in the infrared. This low threshold enables direct pumping without need of an intermediate optical amplifier. We further show how the device design can be modified to generate 780 nm and 1500 nm light with a similar power efficiency. Our nanophotonic OPO shows distinct advantages in power efficiency, operation stability, and device scalability, and is a major advance towards flexible on-chip generation of coherent visible light.