Identification and Quantification of Micro-Bioplastics in Environmental Samples by Pyrolysis-Gas Chromatography-Mass Spectrometry.

Bioplastics are materials that are biobased and/or biodegradable, but not necessarily both. Concerns about environmental plastic pollution are constantly growing with increasing demand for substituting fossil-based plastics with those made using renewable resource feedstocks. For many conventional bioplastics to completely decompose/degrade, they require specific environmental conditions that are rarely met in natural ecosystems, leading to rapid formation of micro-bioplastics. As global bioplastic production and consumption/use continue to increase, there is growing concern regarding the potential for environmental pollution from micro-bioplastics. However, the actual extent of their environmental occurrence and potential impacts remains unclear, and there is insufficient mass concentration-based quantitative data due to the lack of quantitative analytical methods. This study developed and validated an analytical method coupling pressurized liquid extraction and pyrolysis-gas chromatography-mass spectrometry combined with thermochemolysis to simultaneously identify and quantify five targeted micro-bioplastics (i.e., polylactic acid (PLA), polyhydroxyalkanoate, polybutylene succinate, polycaprolactone, and polybutylene adipate terephthalate (PBAT)) in environmental samples on a polymer-specific mass-based concentration. The recovery of spiked micro-bioplastics in environmental samples (biosolids) ranged from 74 to 116%. The limits of quantification for the target micro-bioplastics were between 0.02 and 0.05 mg/g. PLA and PBAT were commonly detected in wastewater, biosolids, and sediment samples at concentrations between 0.07 and 0.18 mg/g. The presented analytical method enables the accurate identification, quantification, and monitoring of micro-bioplastics in environmental samples. This study quantified five micro-bioplastic types in complex environmental samples for the first time, filling in gaps in our knowledge about bioplastic pollution and providing a useful methodology and important reference data for future research.

Concentrations of Tire Additive Chemicals and Tire Road Wear Particles in an Australian Urban Tributary.

Tire road wear particles (TRWPs) are one of the largest sources of microplastics to the urban environment with recent concerns as they also provide a pathway for additive chemicals to leach into the environment. Stormwater is a major source of TRWPs and associated additives to urban surface water, with additives including the antioxidant derivative N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-quinone) demonstrating links to aquatic toxicity at environmentally relevant concentrations. The present study used complementary analysis methods to quantify both TRWPs and a suite of known tire additive chemicals (including 6PPD-quinone) to an urban tributary in Australia during severe storm events. Concentrations of additives increased more than 40 times during storms, with a maximum concentration of 2760 ng/L for ∑15additives, 88 ng/L for 6PPD-quinone, and a similar profile observed in each storm. TRWPs were detected during storm peaks with a maximum concentration between 6.4 and 18 mg/L, and concentrations of TRWPs and all additives were highly correlated. Contaminant mass loads to this catchment were estimated as up to 100 g/storm for ∑15additives, 3 g/storm for 6PPD-quinone, and between 252 and 730 kg of TRWPs/storm. While 6PPD-quinone concentrations in this catchment were lower than previous studies, elevated concentrations post storm suggest prolonged aquatic exposure.

Tracking POPs in Global Air from the First 10 Years of the GAPS Network (2005 to 2014).

The Global Atmospheric Passive Sampling (GAPS) network, initiated in 2005 across 55 global sites, supports the global monitoring plan (GMP) of the Stockholm Convention on Persistent Organic Pollutants (POPs) by providing information on POP concentrations in air on a global scale. These data inform assessments of the long-range transport potential of POPs and the effectiveness evaluation of chemical regulation efforts, by observing changes in concentrations over time. Currently, measurements spanning 5-10 sampling years are available for 40 sites from the GAPS Network. This study was the first time that POP concentrations in air were reported on a global scale for an extended time period and the first to evaluate worldwide trends with an internally consistent sample set. For consistency between sampling years, site- and sample specific sampling rates were calculated with a new, public online model, which accounts for the effects of wind speed variability. Concentrations for legacy POPs in air between 2005 and 2014 show different trends for different organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs). The POPs discussed in this study were chosen due to being the most frequently detected, with detection at the majority of sites. PCB, endosulfan, and hexachlorocyclohexane (HCH) concentrations in air are decreasing at most sites. The global trends reflect global sources and recycling of HCH, ongoing emissions from old stockpiles for PCBs, and recent use restrictions for endosulfan. These chlorinated OCPs continue to present exposure threat to humans and ecosystems worldwide. Concentrations of other OCPs, such as chlordanes, heptachlor and dieldrin, are steady and/or declining slowly at the majority of sites, reflecting a transition from primary to secondary sources (i.e., re-emission from reservoirs where these POPs have accumulated historically) which now control ambient air burdens.

Global Atmospheric Concentrations of Brominated and Chlorinated Flame Retardants and Organophosphate Esters.

Polyurethane foam (PUF) disk passive air samples, deployed during 2014 in the Global Atmospheric Passive Sampling (GAPS) Network, were analyzed for a range of flame retardants (FRs) including polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCD), brominated and chlorinated novel FRs, and organophosphate esters (OPEs). Mean concentrations of PBDEs and novel FRs at the 48 sites monitored ranged from 0.097 to 93 pg/m3 for Σ14PBDEs and from below detection limits to 126 pg/m3 for Σ15novel FRs. For PBDEs, the detected concentrations were similar to those previously reported from samples collected in 2005 at GAPS sites, suggesting global background atmospheric concentrations of PBDEs have not declined since regulatory measures were implemented. OPEs were detected at every GAPS site, with Σ18OPEs ranging from 69 to 7770 pg/m3. OPE concentrations were at least an order of magnitude higher than the PBDEs. This study presents the first data on global distributions of OPEs in the atmosphere, obtained from a single passive sampling monitoring network. Challenges that can arise in passive air sampling campaigns are also highlighted and addressed with suggested recommendations for future campaigns.

Atmospheric Concentrations of New Persistent Organic Pollutants and Emerging Chemicals of Concern in the Group of Latin America and Caribbean (GRULAC) Region.

A special initiative was run by the Global Atmospheric Passive Sampling (GAPS) Network to provide atmospheric data on a range of emerging chemicals of concern and candidate and new persistent organic pollutants in the Group of Latin America and Caribbean (GRULAC) region. Regional-scale data for a range of flame retardants (FRs) including polybrominated diphenyl ethers (PBDEs), organophosphate esters (OPEs), and a range of alternative FRs (novel FRs) are reported over 2 years of sampling with low detection frequencies of the novel FRs. Atmospheric concentrations of the OPEs were an order of magnitude higher than all other FRs, with similar profiles at all sites. Regional-scale background concentrations of the poly- and perfluoroalkyl substances (PFAS), including the neutral PFAS (n-PFAS) and perfluoroalkyl acids (PFAAs), and the volatile methyl siloxanes (VMS) are also reported. Ethyl perfluorooctane sulfonamide (EtFOSA) was detected at highly elevated concentrations in Brazil and Colombia, in line with the use of the pesticide sulfluramid in this region. Similar concentrations of the perfluoroalkyl sulfonates (PFAS) were detected throughout the GRULAC region regardless of location type, and the VMS concentrations in air increased with the population density of sampling locations. This is the first report of atmospheric concentrations of the PFAAs and VMS from this region.

Characterization and Modeling of Polycyclic Aromatic Compound Uptake into Spruce Tree Wood.

This study highlights the potential of uptake into tree inner wood via direct-transfer through bark, as one contributing mechanism to describe atmospheric uptake of polycyclic aromatic compounds (PACs) into trees. The uptake of PACs into blue spruce tree wood was measured, with wood-air partition coefficients (KWOOD_AIR) determined for five PACs. A correlation between the octanol-air partition coefficient (KOA) and KWOOD_AIR for these five chemicals was determined and the KWOOD_AIR for 43 PACs were derived. A ratio of solubility (activity) difference between tree wood and octanol was also determined for these chemicals from this correlation. Finally, the derived KWOOD_AIR values were further applied to calculate an air volume sampled by the inner wood layer (cambium) of a tree during a one year growth (sampling) period. PACs with a log KWOOD_AIR > 6 remained in the linear sampling phase over one year of sampling. The results further highlight the important sink that forests provide for atmospheric organic chemicals which should be considered for emissions monitoring and impact assessments from destructive events such as forest fires or clear felling of forests.

Deep dive into the chronic toxicity of tyre particle mixtures and their leachates.

Particles from the tread of vehicle tyres are a global pollutant, which are emitted into the environment at an approximate rate of 1.4 kg.year-1 for an average passenger-car. In this study, popular tyre brands were used to generate a tyre tread microparticle mixture. The chronic toxicity of both particles and chemical leachates were compared on a planktonic test species (Daphnia magna). Over 21 days of exposure, pristine tyre tread microparticles were more toxic (LC50 60 mg.L-1) than chemical lechates alone (LC50 542 mg.L-1). Microparticles and leachates showed distinct effects on reproduction and morphological development at environmentally relevant concentrations, with dose-dependent uptake of particles visible in the digestive tract. Chemical characterization of leachates revealed a metal predominance of zinc, titanium, and strontium. Of the numerous organic chemicals present, at least 54 were shared across all 5 tyre brands, with many classified to be very toxic. Our results provide a critically needed information on the toxicity of tyre tread particles and the associated chemicals that leach from them to inform future mitigation measures. We conclude that tyre particles are hazardous pollutants of particular concern that are close to or possibly above chronic environmental safety limits in some locations.

Blueprint for the design, construction, and validation of a plastic and phthalate-minimised laboratory.

Micro and nanosized plastics (MNPs), and a range of associated additive chemicals, have become pervasive contaminants that humans and the environment are exposed to everyday. However, one of the principal challenges in their analysis is adequate strategies to minimise background contamination. Here a blueprint for a specialised plastics and additive-minimised clean room laboratory built for this purpose is presented. Common laboratory construction materials (n = 23) were tested, including acoustic baffles, ceiling materials, floor materials, glazing rubber, and silicone sealant. The % polymer content ranged from 2-76% w/w while the sum concentration of six phthalates ranged from 0.81 (0.73-0.86) to 21000 (15000-27000) mg/kg, assigning many of these materials as inappropriate for use in a clean room environment. The final design of the laboratory consisted of three interconnected rooms, operated under positive pressure with the inner rooms constructed almost entirely of stainless steel. Background concentrations of MNPs and phthalates in the new laboratory were compared to two Physical Containment Level 2 (PC2) laboratory environments, with concentrations of MNPs reduced by > 100 times and phthalates reduced by up to 120 times. This study reports the first known clean room of its kind and provides a blueprint for reference and use by future plastics research.

Exposure to flame retardant chemicals on commercial airplanes.

BACKGROUND: Flame retardant chemicals are used in materials on airplanes to slow the propagation of fire. These chemicals migrate from their source products and can be found in the dust of airplanes, creating the potential for exposure. METHODS: To characterize exposure to flame retardant chemicals in airplane dust, we collected dust samples from locations inside 19 commercial airplanes parked overnight at airport gates. In addition, hand-wipe samples were also collected from 9 flight attendants and 1 passenger who had just taken a cross-country (USA) flight. The samples were analyzed for a suite of flame retardant chemicals. To identify the possible sources for the brominated flame retardants, we used a portable XRF analyzer to quantify bromine concentrations in materials inside the airplanes. RESULTS: A wide range of flame retardant compounds were detected in 100% of the dust samples collected from airplanes, including BDEs 47, 99, 153, 183 and 209, tris(1,3-dichloro-isopropyl)phosphate (TDCPP), hexabromocyclododecane (HBCD) and bis-(2-ethylhexyl)-tetrabromo-phthalate (TBPH). Airplane dust contained elevated concentrations of BDE 209 (GM: 500 ug/g; range: 2,600 ug/g) relative to other indoor environments, such as residential and commercial buildings, and the hands of participants after a cross-country flight contained elevated BDE 209 concentrations relative to the general population. TDCPP, a known carcinogen that was removed from use in children's pajamas in the 1970's although still used today in other consumer products, was detected on 100% of airplanes in concentrations similar to those found in residential and commercial locations. CONCLUSION: This study adds to the limited body of knowledge regarding exposure to flame retardants on commercial aircraft, an environment long hypothesized to be at risk for maximum exposures due to strict flame retardant standards for aircraft materials. Our findings indicate that flame retardants are widely used in many airplane components and all airplane types, as expected. Most flame retardants, including TDCPP, were detected in 100% of dust samples collected from the airplanes. The concentrations of BDE 209 were elevated by orders of magnitude relative to residential and office environments.

Mass quantification of microplastic at wastewater treatment plants by pyrolysis-gas chromatography-mass spectrometry.

Municipal wastewater treatment plants (WWTPs) are a central point of collection of plastic particles from households and industry and for their re-distribution into the environment. Existing studies evaluating levels of plastics in WWTPs, and their removal rates have reported and used data on polymer type, size, shape, colour, and number of plastic particles, while the total mass concentration of plastic particles (especially >1 µm) remains unclear and unknown. To address this knowledge gap, raw influent, effluent, and reference water samples from three WWTPs in Australia were collected to analyse the mass concentrations and removal rates of seven common plastics (>1 µm in size) across the treatment schemes. Quantitative analysis was performed by pressurized liquid extraction followed by pyrolysis coupled to gas chromatography mass spectrometry. Results showed that the total plastic content in the WWTPs raw influent samples was between 840 and 3116 µg/L, resulting in an inflow of between about 2.1 and 196.4 kg/day of the total measured plastics. Overall, >99 % by mass of the plastics entering the three WWTPs from the raw influent was removed during the pre-treatment stages, presumably ending up in the sewage sludge, which means emissions (via treated effluent) from the treatment plants are low. Compared with the raw influent, the plastic mass concentrations in the treated effluents (i.e., Class C, A, and final effluent) from the three WWTPs, as well as the reference water samples within their catchments were below the limits of reporting. Of the five quantified plastic types, polyethylene (PE, 76.4 %), and polyvinylchloride (PVC, 21 %) dominated by mass, while polyethylene terephthalate (PET, 1.9 %), polypropylene (PP, 0.4 %) and polymethyl methacrylate (PMMA, 0.3 %) accounted for a small proportion of the total. Overall, this study investigated the mass concentrations of plastic particles above 1 µm in wastewater and their removal, which provided valuable information regarding the pollution level and distribution characteristics of plastic polymers in Australian WWTPs.

Impacts of Proximity to Primary Source Areas on Concentrations of POPs at Global Sampling Stations Estimated from Land Cover Information.

Given the considerable financial and logistical resources supporting long-term monitoring for air pollutants, and the use of these data for performance evaluation of mitigation measures, it is important to account for contributions from primary versus secondary sources. We demonstrate a simple approach for using open source Global land cover raster data from the National Mapping Organization from the Geospatial Information Authority of Japan to assess local source inputs for air measurements of legacy persistent organic pollutants (POPs)-polychlorinated biphenyls (PCBs) and organochlorine pesticides-reported under the Global atmospheric passive sampling (GAPS) Network at 119 locations for the time period 2005-2014. The land cover composition within a 10 km radius around the GAPS sites was identified to create source impact indicator (SII) vectors to quantify and rank the remoteness of the sites from human infrastructure. Using principal component analysis, three SII vectors were established to rank sites by impact of (i) general infrastructure/remoteness, (ii) urban infrastructure, and (iii) agricultural infrastructure. General infrastructure describes the combined effects of settlements and agricultural infrastructure. We found significant correlations (p < 0.05) between POP concentrations in air and specific SIIs. PCB levels in air had a statistically significant correlation to the SII ranking urban impacts around the sampling sites, while Endosulfan I, Endosulfan II, and Endosulfan sulfate had a statistically significant correlation with SII ranking agricultural impacts. The complete GAPS data set from 2004-2014 (1040 samples at 119 locations) was standardized based on the SII rankings to assess the global temporal trends of legacy POPs. SIIs were incorporated in the multiple regression analysis to determine global halving times. This includes short-term monitoring data from 79 locations that were previously excluded. Furthermore, the SII approach allows the integration of global monitoring data from different studies for broader global temporal trend analysis. This ability to link the results of independent and small-scale studies can enhance temporal trend analysis in support of the larger scale initiatives, such as inter alia, the Global Monitoring Plan and Effectiveness Evaluation of the Stockholm Convention in the case of POPs. This simple approach using open source data has a broad potential for application for other classes of air pollutants.

Evaluation and identification of chemical migrants leached from baby food pouch packaging.

Multilayer plastic pouch (MLPP) has an estimated 9% annual increase of market growth. However, the migrants it can introduce to food has not yet been systematically studied. A total of 79 MLPPs for baby food were purchased from major retail outlets in Australia. The methodology for testing chemical migration followed the design of previous studies using four types of selected simulants according to the European Committee Regulation No. 10/2011 method. Four bisphenols and five phthalic acid diesters (PAEs) were detected, including the ones known for endocrine disrupting effect in human. Three intentionally added and 23 non-intentionally added substances (NIAS) were tentatively identified through a suspect screening procedure. Out of the 23 NIAS, neopentyl glycol - phthalic acid - 1,6-hexanediol - phthalic acid oligomer was identified for the first time with MLPP. A further two NIAS were detected for the first time in baby food related products. For 40% of the pouches where adipic acid - diethylene glycol was detected, the estimated exposure from consuming one pouch of food per day may exceed the threshold of toxicological concern established based on the Cramer classification.

InSpectra - A platform for identifying emerging chemical threats.

Non-target analysis (NTA) employing high-resolution mass spectrometry (HRMS) coupled with liquid chromatography is increasingly being used to identify chemicals of biological relevance. HRMS datasets are large and complex making the identification of potentially relevant chemicals extremely challenging. As they are recorded in vendor-specific formats, interpreting them is often reliant on vendor-specific software that may not accommodate advancements in data processing. Here we present InSpectra, a vendor independent automated platform for the systematic detection of newly identified emerging chemical threats. InSpectra is web-based, open-source/access and modular providing highly flexible and extensible NTA and suspect screening workflows. As a cloud-based platform, InSpectra exploits parallel computing and big data archiving capabilities with a focus for sharing and community curation of HRMS data. InSpectra offers a reproducible and transparent approach for the identification, tracking and prioritisation of emerging chemical threats.

There's something in the air: A review of sources, prevalence and behaviour of microplastics in the atmosphere.

Literature regarding microplastics in the atmosphere has advanced in recent years. However, studies have been undertaken in isolation with minimal collaboration and exploration of the relationships between air, deposition and dust. This review collates concentrations (particle count and mass-based), shape, size and polymetric characteristics for microplastics in ambient air (m3), deposition (m2/day), dust (microplastics/g) and snow (microplastics/L) from 124 peer-reviewed articles to provide a holistic overview and analysis of our current knowledge. In summary, ambient air featured concentrations between <1 to >1000 microplastics/m3 (outdoor) and <1 microplastic/m3 to 1583 ± 1181 (mean) microplastics/m3 (indoor), consisting of polyethylene terephthalate, polyethylene, polypropylene. No difference (p > 0.05) was observed between indoor and outdoor concentrations or the minimum size of microplastics (p > 0.5). Maximum microplastic sizes were larger indoors (p < 0.05). Deposition concentrations ranged between 0.5 and 1357 microplastics/m2/day (outdoor) and 475 to 19,600 microplastics/m2/day (indoor), including polyethylene, polystyrene, polypropylene, polyethylene terephthalate. Concentrations varied between indoor and outdoor deposition (p < 0.05), being more abundant indoors, potentially closer to sources/sinks. No difference was observed between the minimum or maximum reported microplastic sizes within indoor and outdoor deposition (p > 0.05). Road dust concentrations varied between 2 ± 2 and 477 microplastics/g (mean), consisting of polyvinyl chloride, polyethylene, polypropylene. Mean outdoor dust concentrations ranged from <1 microplastic/g (remote desert) to between 18 and 225 microplastics/g, comprised of polyethylene terephthalate, polyamide, polypropylene. Snow concentrations varied between 0.1 and 30,000 microplastics/L, containing polyethylene, polyamide, polypropylene. Concentrations within indoor dust varied between 10 and 67,000 microplastics/g, including polyethylene terephthalate, polyethylene, polypropylene. No difference was observed between indoor and outdoor concentrations (microplastics/g) or maximum size (p > 0.05). The minimum size of microplastics were smaller within outdoor dust (p > 0.05). Although comparability is hindered by differing sampling methods, analytical techniques, polymers investigated, spectral libraries and inconsistent terminology, this review provides a synopsis of knowledge to date regarding atmospheric microplastics.

Tyre additive chemicals, tyre road wear particles and high production polymers in surface water at 5 urban centres in Queensland, Australia.

Plastics pollution is a global issue impacting every part of our environment. Tyre road wear particle (TRWP) plastics pollution is thought to be one of the largest pollution sources in urban environments. These plastics are also of concern due to the presence of additive chemicals, incorporated during manufacture, that can be released into the surrounding environment. This study aimed to provide information on concentrations of a range of anthropogenic plastics related pollutants in the Australian environment through a scoping study of surface water in 5 key urban centres around Queensland, Australia. Samples were analysed for a suite of 15 common tyre additive chemicals, TRWPs and 6 common high production polymers, and included the new transformation product of concern 6PPD-quinone which has recent reports of causing mass mortality events in certain aquatic species. The additives were ubiquitously detected (2.9-1440 ng/L) with 6PPD-quinone concentrations lower than in previous studies (<0.05-24 ng/L) and TRWPs detected at 18 of the 21 sites (

Occurrence of tire and road wear particles in urban and peri-urban snowbanks, and their potential environmental implications.

According to estimates put forward in multiple studies, tire and road wear particles are one of the largest sources to microplastic contamination in the environment. There are large uncertainties associated with local emissions and transport of tire and road wear particles into environmental compartments, highlighting an urgent need to provide more data on inventories and fluxes of these particles. To our knowledge, the present paper is the first published data on mass concentrations and snow mass load of tire and polymer-modified road wear particles in snow. Roadside snow and meltwater from three different types of roads (peri-urban, urban highway and urban) were analysed by Pyrolysis Gas Chromatography Mass Spectrometry. Tire particle mass concentrations in snow (76.0-14,500 mg/L meltwater), and snow mass loads (222-109,000 mg/m2) varied widely. The concentration ranges of polymer-modified particles were 14.8-9550 mg/L and 50.0-28,800 mg/m2 in snow and meltwater, respectively. Comparing the levels of tire and PMB particles to the total mass of particles, showed that tire and PMB-particles combined only contribute to 5.7% (meltwater) and 5.2% (mass load) of the total mass concentration of particles. The large variation between sites in the study was investigated using redundancy analysis of the possible explanatory variables. Contradictory to previous road studies, speed limit was found to be one of the most important variables explaining the variation in mass concentrations, and not Annual Average Daily Traffic. All identified variables explained 69% and 66%, for meltwater and mass load concentrations, respectively. The results show that roadside snow contain total suspended solids in concentrations far exceeding release limits of tunnel and road runoff, as well as tire particles in concentrations comparable to levels previously reported to cause toxicity effects in organisms. These findings strongly indicate that roadside snow should be treated before release into the environment.

Phthalate esters in face masks and associated inhalation exposure risk.

This study assessed the composition of single-use face mask materials, quantified the concentration of phthalate esters in masks and evaluated associated inhalation exposure risk. All the mask samples, including 12 surgical and four N95/P1/P2 masks, were identified to be made of polypropylene, with polyethylene terephthalate present in the N95/P1/P2 masks. Di-methyl phthalate, di-n-butyl phthalate, di-ethyl phthalate, di-isobutyl phthalate and di(2-ethylhexyl) phthalate were frequently detected and their concentration summed up 55 ± 35 ~ 1700 ± 140 ng per surgical mask and 2300 ± 150 ~ 5200 ± 800 ng per N95/P1/P2 mask. Our simulation experiment suggested a mean loss of 13 - 71% of phthalate mass depending on compounds, during 5-hour wearing of these masks. This resulted in an estimated daily intake of individual compounds no higher than 20 ng/kg/day for adults and 120 ng/kg/day for toddlers, which were at least 80 times lower compared to relevant tolerable daily intake values. Two interventional trials were conducted where a volunteer wore a mask for four hours and urine samples were collected before and after the mask wearing. No obvious increase was observed for the urinary concentration of any phthalate metabolite, indicating minimal contribution to overall exposure to phthalate esters.

A novel method for the quantification of tire and polymer-modified bitumen particles in environmental samples by pyrolysis gas chromatography mass spectroscopy.

Tire and road wear particles may constitute the largest source of microplastic particles into the environment. Quantification of these particles are associated with large uncertainties which are in part due to inadequate analytical methods. New methodology is presented in this work to improve the analysis of tire and road wear particles using pyrolysis gas chromatography mass spectrometry. Pyrolysis gas chromatography mass spectrometry of styrene butadiene styrene, a component of polymer-modified bitumen used on road asphalt, produces pyrolysis products identical to those of styrene butadiene rubber and butadiene rubber, which are used in tires. The proposed method uses multiple marker compounds to measure the combined mass of these rubbers in samples and includes an improved step of calculating the amount of tire and road based on the measured rubber content and site-specific traffic data. The method provides good recoveries of 83-92% for a simple matrix (tire) and 88-104% for a complex matrix (road sediment). The validated method was applied to urban snow, road-side soil and gully-pot sediment samples. Concentrations of tire particles in these samples ranged from 0.1 to 17.7 mg/mL (snow) to 0.6-68.3 mg/g (soil/sediment). The concentration of polymer-modified bitumen ranged from 0.03 to 0.42 mg/mL (snow) to 1.3-18.1 mg/g (soil/sediment).

Does size matter? Quantification of plastics associated with size fractionated biosolids.

This study investigated the occurrence and contribution of plastic particles associated with size fractionated biosolids to the total concentration in biosolids (treated sewage sludge) samples collected from 20 wastewater treatment plants (WWTP) across Australia. This was achieved through sequential size fractionation of biosolids samples to quantify the mass concentration of 7 common plastics across a range of biosolids size fractions, including below 25 µm which has not been assessed in many previous studies. Quantitative analysis was performed by pressurized liquid extraction followed by pyrolysis coupled to gas chromatography - mass spectrometry. Of the total quantified plastics (Σ7plastics), the greatest proportion (27%) of the total mass were identified in the nominal <25 µm sized biosolids fraction. Polyethylene dominated the polymer mass in every size fraction, even though profiles varied between WWTPs. When comparing the sum of all sites for each sized biosolids fraction, the plurality of the polyethylene, polyvinyl-chloride, polystyrene, polypropylene, polycarbonate, and polyethylene-terephthalate concentrations were associated with the smallest size fraction (<25 µm). We confirm for the first time the presence of plastic particles in biosolids below a size fraction that is not captured by many methods. This is important, because of the potential greater significance of plastics in the low sizes to environmental and human health.

Plastics contamination of store-bought rice.

This study investigated mass concentrations of selected plastics in store-bought rice, the staple of more than half the world's population. Polyethylene, polyethylene terephthalate, poly-(methyl methacrylate), polypropylene, polystyrene and polyvinyl chloride were quantified using pressurized liquid extraction coupled to double-shot pyrolysis gas chromatography/mass spectrometry. Polyethylene, polypropylene and polyethylene terephthalate were quantifiable in the rice samples with polyethylene the most frequently detected (95%). There was no statistical difference between total plastic concentration in paper and plastic packaged rice. Shaking the rice in its packaging had no significant difference on the concentration of plastics. Washing the rice with water significantly reduced plastic contamination. Instant (pre-cooked) rice contained fourfold higher levels of plastics, suggesting that industrial processing potentially increases contamination. A preliminary estimate of the intake of plastic through rice consumption for Australians established 3.7 mg per serve (100 g) if not washed and 2.8 mg if washed. Annual consumption was estimated around 1 g/person.