RESUMO
Control of the singlet-triplet energy gap (ΔEST) is central to realizing productive energy conversion reactions, photochemical reaction trajectories, and emergent applications that exploit molecular spin physics. Despite this, no systematic methods have been defined to tune ΔEST in simple molecular frameworks, let alone by an approach that also holds chromophore size and electronic structural parameters (such as the HOMO-LUMO gap) constant. Using a combination of molecular design, photophysical and potentiometric experiments, and quantum chemical analyses, we show that the degree of electron-electron repulsion in excited singlet and triplet states may be finely controlled through the substitution pattern of a simple porphyrin absorber, enabling regulation of relative electronically excited singlet and triplet state energies by the designed restriction of the electron-electron Coulomb (J) and exchange (K) interaction magnitudes. This approach modulates the ΔEST magnitude by controlling the densities of state in the occupied and virtual molecular orbital manifolds, natural transition orbital polarization, and the relative contributions of one electron transitions involving select natural transition orbital pairs. This road map, which regulates electron density overlaps in the occupied and virtual states that define the singlet and triplet wave functions of these chromophores, enables new approaches to preserve excitation energy despite intersystem crossing.
Assuntos
Elétrons , Porfirinas , Porfirinas/químicaRESUMO
Although soft devices (grippers, actuators, and elementary robots) are rapidly becoming an integral part of the broad field of robotics, autonomy for completely soft devices has only begun to be developed. Adaptation of conventional systems of control to soft devices requires hard valves and electronic controls. This paper describes completely soft pneumatic digital logic gates having a physical scale appropriate for use with current (macroscopic) soft actuators. Each digital logic gate utilizes a single bistable valve-the pneumatic equivalent of a Schmitt trigger-which relies on the snap-through instability of a hemispherical membrane to kink internal tubes and operates with binary high/low input and output pressures. Soft, pneumatic NOT, AND, and OR digital logic gates-which generate known pneumatic outputs as a function of one, or multiple, pneumatic inputs-allow fabrication of digital logic circuits for a set-reset latch, two-bit shift register, leading-edge detector, digital-to-analog converter (DAC), and toggle switch. The DAC and toggle switch, in turn, can control and power a soft actuator (demonstrated using a pneu-net gripper). These macroscale soft digital logic gates are scalable to high volumes of airflow, do not consume power at steady state, and can be reconfigured to achieve multiple functionalities from a single design (including configurations that receive inputs from the environment and from human users). This work represents a step toward a strategy to develop autonomous control-one not involving an electronic interface or hard components-for soft devices.
RESUMO
This paper describes a surface analysis technique that uses the "EGaIn junction" to measure tunneling current densities (J(V), amps/cm2) through self-assembled monolayers (SAMs) terminated in a chelating group and incorporating different transition metal ions. Comparisons of J(V) measurements between bare chelating groups and chelates are used to characterize the composition of the SAM and infer the dissociation constant (Kd, mol/L), as well as kinetic rate constants (koff, L/mol·s; kon, 1/s) of the reversible chelate-metal reaction. To demonstrate the concept, SAMs of 11-(4-methyl-2,2'-bipyrid-4'-yl (bpy))undecanethiol (HS(CH2)11bpy) were incubated within ethanol solutions of metal salts. After rinsing and drying the surface, measurements of current as a function of incubation time and concentration in solution are used to infer koff, kon, and Kd. X-ray photoelectron spectroscopy (XPS) provides an independent measure of surface composition to confirm inferences from J(V) measurements. Our experiments establish that (i) bound metal ions are stable to the rinsing step as long as the rinsing time, τrinse ⪠1koff; (ii) the bound metal ions increase the current density at the negative bias and reduce the rectification observed with free bpy terminal groups; (iii) the current density as a function of the concentration of metal ions in solution follows a sigmoidal curve; and (iv) the values of Kd measured using J(V) are comparable to those measured using XPS, but larger than those measured in solution. The EGaIn junction, thus, provides a new tool for the analysis of the composition of the surfaces that undergo reversible chemical reactions with species in solution.
RESUMO
We present a physically intuitive model of molecular quantum dots beyond the constant interaction approximation. It accurately describes their charging behavior and allows the extraction of important molecular properties that are otherwise experimentally inaccessible. The model is applied to data recorded with a noncontact atomic force microscope on three different molecules that act as a quantum dot when attached to the microscope tip. The results are in excellent agreement with first-principles simulations.
RESUMO
The electron polaron, a spin-1/2 excitation, is the fundamental negative charge carrier in π-conjugated organic materials. Large polaron spatial dimensions result from weak electron-lattice coupling and thus identify materials with unusually low barriers for the charge transfer reactions that are central to electronic device applications. Here we demonstrate electron polarons in π-conjugated multiporphyrin arrays that feature vast areal delocalization. This finding is evidenced by concurrent optical and electron spin resonance measurements, coupled with electronic structure calculations that suggest atypically small reorganization energies for one-electron reduction of these materials. Because the electron polaron dimension can be linked to key performance metrics in organic photovoltaics, light-emitting diodes, and a host of other devices, these findings identify conjugated materials with exceptional optical, electronic, and spintronic properties.
RESUMO
Challenging photochemistry demands high-potential visible-light-absorbing photo-oxidants. We report (i) a highly electron-deficient Ru(II) complex (eDef-Rutpy) bearing an E1/20/+ potential more than 300 mV more positive than that of any established Ru(II) bis(terpyridyl) derivative, and (ii) an ethyne-bridged eDef-Rutpy-(porphinato)Zn(II) (eDef-RuPZn) supermolecule that affords both panchromatic UV-vis spectral domain absorptivity and a high E1/20/+ potential, comparable to that of Ce(NH4)2(NO3)6 [E1/2(Ce3+/4+) = 1.61 V vs NHE], a strong and versatile ground-state oxidant commonly used in organic functional group transformations. eDef-RuPZn exhibits â¼8-fold greater absorptive oscillator strength over the 380-700 nm range relative to conventional Ru(II) polypyridyl complexes, and impressive excited-state reduction potentials (1E-/* = 1.59 V; 3E-/* = 1.26 V). eDef-RuPZn manifests electronically excited singlet and triplet charge-transfer state lifetimes more than 2 orders of magnitude longer than those typical of conventional Ru(II) bis(terpyridyl) chromophores, suggesting new opportunities in light-driven oxidation reactions for energy conversion and photocatalysis.
RESUMO
Spin and conformational dynamics in symmetric alkyne-bridged multi[copper(II) porphyrin] structures have been studied in toluene solution at variable temperature using steady-state electron paramagnetic resonance (EPR) spectroscopy. Comparison of the dimer EPR spectra to those of Cu porphyrin monomers shows evidence of an isotropic exchange interaction (Javg) in these biradicaloid structures, manifested by a significant line broadening in the dimer spectra. The extent line broadening depends on molecular structure and temperature, suggesting Javg is modulated by conformational dynamics that impact the torsional angle distribution between the porphyrin-porphyrin least-squares planes. Computational simulation of the experimental EPR spectra, using a developed algorithm for J modulation in flexible organic biradicals, supports this hypothesis. Comparison of ethyne and butadiyne alkyne bridges reveals remarkable sensitivity to orbital interactions between the spacer and the metal, reflected in measurements of Javg as a function of temperature. The results suggest orbital symmetry relationships may be more important than recognized in design of optimized molecular spintronic devices.
RESUMO
Realizing chromophores that simultaneously possess substantial near-infrared (NIR) absorptivity and long-lived, high-yield triplet excited states is vital for many optoelectronic applications, such as optical power limiting and triplet-triplet annihilation photon upconversion (TTA-UC). However, the energy gap law ensures such chromophores are rare, and molecular engineering of absorbers having such properties has proven challenging. Here, we present a versatile methodology to tackle this design issue by exploiting the ethyne-bridged (polypyridyl)metal(II) (M; M = Ru, Os)-(porphinato)metal(II) (PM'; M' = Zn, Pt, Pd) molecular architecture (M-(PM')n-M), wherein high-oscillator-strength NIR absorptivity up to 850 nm, near-unity intersystem crossing (ISC) quantum yields (ΦISC), and triplet excited-state (T1) lifetimes on the microseconds time scale are simultaneously realized. By varying the extent to which the atomic coefficients of heavy metal d orbitals contribute to the one-electron excitation configurations describing the initially prepared singlet and triplet excited-state wave functions, we (i) show that the relative magnitudes of fluorescence (k0F), S1 â S0 nonradiative decay (knr), S1 â T1 ISC (kISC), and T1 â S0 relaxation (kT1âS0) rate constants can be finely tuned in M-(PM')n-M compounds and (ii) demonstrate designs in which the kISC magnitude dominates singlet manifold relaxation dynamics but does not give rise to T1 â S0 conversion dynamics that short-circuit a microseconds time scale triplet lifetime. Notably, the NIR spectral domain absorptivities of M-(PM')n-M chromophores far exceed those of classic coordination complexes and organic materials possessing similarly high yields of triplet-state formation: in contrast to these benchmark materials, this work demonstrates that these M-(PM')n-M systems realize near unit ΦISC at extraordinarily modest S1-T1 energy gaps (â¼0.25 eV). This study underscores the photophysical diversity of the M-(PM')n-M platform and presents a new library of long-wavelength absorbers that efficiently populate long-lived T1 states.
RESUMO
The influence of electronic symmetry on triplet state delocalization in linear zinc porphyrin oligomers is explored by electron paramagnetic resonance techniques. Using a combination of transient continuous wave and pulse electron nuclear double resonance spectroscopies, it is demonstrated experimentally that complete triplet state delocalization requires the chemical equivalence of all porphyrin units. These results are supported by density functional theory calculations, showing uneven delocalization in a porphyrin dimer in which a terminal ethynyl group renders the two porphyrin units inequivalent. When the conjugation length of the molecule is further increased upon addition of a second terminal ethynyl group that restores the symmetry of the system, the triplet state is again found to be completely delocalized. The observations suggest that electronic symmetry is of greater importance for triplet state delocalization than other frequently invoked factors such as conformational rigidity or fundamental length-scale limitations.
RESUMO
Molecular electronics offers the potential to control device functions through the fundamental electronic properties of individual molecules, but realization of such possibilities is typically frustrated when such specialized molecules are integrated into a larger area device. Here we utilize highly conjugated (porphinato)metal-based oligomers (PM(n) structures) as molecular wire components of nanotransfer printed (nTP) molecular junctions; electrical characterization of these "bulk" nTP devices highlights device resistances that depend on PM(n) wire length. Device resistance measurements, determined as a function of PM(n) molecular length, were utilized to evaluate the magnitude of a phenomenological ß corresponding to the resistance decay parameter across the barrier; these data show that the magnitude of this ß value is modulated via porphyrin macrocycle central metal atom substitution [ß(PZn(n); 0.065 Å(-1)) < ß(PCu(n); 0.132 Å(-1)) < ß(PNi(n); 0.176 Å(-1))]. Cyclic voltammetric data, and ultraviolet photoelectron spectroscopic studies carried out at gold surfaces, demonstrate that these nTP device resistances track with the valence band energy levels of the PM(n) wire, which were modulated via porphyrin macrocycle central metal atom substitution. This study demonstrates the ability to fabricate "bulk" and scalable electronic devices in which function derives from the electronic properties of discrete single molecules, and underscores how a critical device function--wire resistance--may be straightforwardly engineered by PM(n) molecular composition.
RESUMO
We provide a direct measure of the change in effective dielectric constant (ε(S)) within a protein matrix after a photoinduced electron transfer (ET) reaction. A linked donor-bridge-acceptor molecule, PZn-Ph-NDI, consisting of a (porphinato)Zn donor (PZn), a phenyl bridge (Ph), and a naphthalene diimide acceptor (NDI), is shown to be a "meter" to indicate protein dielectric environment. We calibrated PZn-Ph-NDI ET dynamics as a function of solvent dielectric, and computationally de novo designed a protein SCPZnI3 to bind PZn-Ph-NDI in its interior. Mapping the protein ET dynamics onto the calibrated ET catalogue shows that SCPZnI3 undergoes a switch in the effective dielectric constant following photoinduced ET, from ε(S) ≈ 8 to ε(S) ≈ 3.
Assuntos
Processos Fotoquímicos , Proteínas/química , Transporte de Elétrons , Imidas/química , Modelos Moleculares , Estrutura Molecular , Naftalenos/química , Compostos Organometálicos/química , Zinco/químicaRESUMO
Polymersomes are bilayer vesicles that self-assemble from amphiphilic diblock copolymers, and provide an attractive system for the delivery of biological and nonbiological molecules due to their environmental compatibility, mechanical stability, synthetic tunability, large aqueous core, and hyperthick hydrophobic membrane. Herein, we report a nanoscale photoresponsive polymersome system featuring a meso-to-meso ethyne-bridged bis[(porphinato)zinc] (PZn2) fluorophore hydrophobic membrane solute and dextran in the aqueous core. Upon 488 nm irradiation in solution or in microinjected zebrafish embryos, the polymersomes underwent deformation, as monitored by a characteristic red-shifted PZn2 emission spectrum and confirmed by cryo-TEM. The versatility of this system was demonstrated through the encapsulation and photorelease of a fluorophore (FITC), as well as two different metal ions, Zn(2+) and Ca(2+).
Assuntos
Luz , Polímeros/química , Cálcio/química , Microscopia Crioeletrônica , Interações Hidrofóbicas e Hidrofílicas , Zinco/químicaRESUMO
Single molecule break junction experiments and nonequilibrium Green's function calculations using density functional theory (NEGF-DFT) of carbodithioate- and thiol-terminated [5,15-bis(phenylethynyl)-10,20-diarylporphinato]zinc(II) complexes reveal the impact of the electrode-linker coordination mode on charge transport at the single-molecule level. Replacement of thiolate (-S(-)) by the carbodithioate (-CS2(-)) anchoring motif leads to an order of magnitude increase of single molecule conductance. In contrast to thiolate-terminated structures, metal-molecule-metal junctions that exploit the carbodithioate linker manifest three distinct conductance values. We hypothesize that the magnitudes of these conductances depend upon carbodithoate linker hapticity with measured conductances across Au-[5,15-bis(4'-(dithiocarboxylate)phenylethynyl)-10,20-diarylporphinato]zinc(II)-Au junctions the greatest when both anchoring groups attach to the metal surface in a bidentate fashion. We support this hypothesis with NEGF-DFT calculations, which consider the electron transport properties for specific binding geometries. These results provide new insights into the origin of molecule-to-molecule conductance heterogeneity in molecular charge transport measurements and the factors that optimize electrode-molecule-electrode electronic coupling and maximize the conductance for charge transport.
Assuntos
Complexos de Coordenação/química , Condutividade Elétrica , Metaloporfirinas/química , Tiocarbamatos/química , Zinco/química , Eletrodos , Eletrônica/instrumentação , Desenho de Equipamento , Modelos MolecularesRESUMO
Single-walled carbon nanotube (SWNT)-based nanohybrid compositions based on (6,5) chirality-enriched SWNTs ([(6,5) SWNTs]) and a chiral n-type polymer (S-PBN(b)-Ph4 PDI) that exploits a perylenediimide (PDI)-containing repeat unit are reported; S-PBN(b)-Ph4 PDI-[(6,5) SWNT] superstructures feature a PDI electron acceptor unit positioned at 3â nm intervals along the nanotube surface, thus controlling rigorously SWNT-electron acceptor stoichiometry and organization. Potentiometric studies and redox-titration experiments determine driving forces for photoinduced charge separation (CS) and thermal charge recombination (CR) reactions, as well as spectroscopic signatures of SWNT hole polaron and PDI radical anion (PDI(-.) ) states. Time-resolved pump-probe spectroscopic studies demonstrate that S-PBN(b)-Ph4 PDI-[(6,5) SWNT] electronic excitation generates PDI(-.) via a photoinduced CS reaction (τCS ≈0.4â ps, ΦCS ≈0.97). These experiments highlight the concomitant rise and decay of transient absorption spectroscopic signatures characteristic of the SWNT hole polaron and PDI(-.) states. Multiwavelength global analysis of these data provide two charge-recombination time constants (τCR ≈31.8 and 250â ps) that likely reflect CR dynamics involving both an intimately associated SWNT hole polaron and PDI(-.) charge-separated state, and a related charge-separated state involving PDI(-.) and a hole polaron site produced via hole migration along the SWNT backbone that occurs over this timescale.
RESUMO
The syntheses, potentiometric responses, optical spectra, electronic structural properties, and integration into photovoltaic devices are described for ethyne-bridged isoindigo-(porphinato)zinc(II)-isoindigo chromophores built upon either electron-rich 10,20-diaryl porphyrin (Ar-Iso) or electron-deficient 10,20-bis(perfluoroalkyl)porphyrin (Rf-Iso) frameworks. These supermolecules evince electrochemical responses that trace their geneses to their respective porphyrinic and isoindigoid subunits. The ethyne linkage motif effectively mixes the comparatively weak isoindigo-derived visible excitations with porphyrinic π-π* states, endowing Ar-Iso and Rf-Iso with high extinction coefficient (ε â¼ 10(5) M(-1)·cm(-1)) long-axis polarized absorptions. Ar-Iso and Rf-Iso exhibit total absorptivities per unit mass that greatly exceed that for poly(3-hexyl)thiophene (P3HT) over the 375-900 nm wavelength range where solar flux is maximal. Time-dependent density functional theory calculations highlight the delocalized nature of the low energy singlet excited states of these chromophores, demonstrating how coupled oscillator photophysics can yield organic photovoltaic device (OPV) materials having absorptive properties that supersede those of conventional semiconducting polymers. Prototype OPVs crafted from the poly(3-hexyl)thiophene (P3HT) donor polymer and these new materials (i) confirm that solar power conversion depends critically upon the driving force for photoinduced hole transfer (HT) from these low-band-gap acceptors, and (ii) underscore the importance of the excited-state reduction potential (E(-/*)) parameter as a general design criterion for low-band-gap OPV acceptors. OPVs constructed from Rf-Iso and P3HT define rare examples whereby the acceptor material extends the device operating spectral range into the NIR, and demonstrate for the first time that high oscillator strength porphyrinic chromophores, conventionally utilized as electron donors in OPVs, can also be exploited as electron acceptors.
RESUMO
Probes embedded within a structure can enable prediction of material behavior or failure. Carefully assembled composites that respond intelligently to physical changes within a material could be useful as intrinsic sensors. Molecular rotors are one such tool that can respond optically to physical environmental changes. Here, we propose to use molecular rotors within a polymersome membrane to report membrane stress. Using supermolecular porphyrin-based fluorophores as rotors, we characterize changes in the optical emission of these near-infrared (NIR) emissive probes embedded within the hydrophobic core of the polymersome membrane. The configuration of entrapped fluorophore depends on the available space within the membrane; in response to increased volume, emission is blue shifted. We used this feature to study how shifts in fluorescence correlate to membrane integrity, imparted by membrane stress. We monitored changes in emission of these porphyrin-based fluorophores resulting from membrane stress produced through a range of physical and chemical perturbations, including surfactant-induced lysis, hydrolytic lysis, thermal degradation, and applied stress by micropipette aspiration. This paper comprehensively illustrates the potential for supermolecular porphyrin-based fluorophores to detect intrinsic physical changes in a wide variety of environments, and suggests how molecular rotors may be used in soft materials science and biology as sensors.
Assuntos
Raios Infravermelhos , Membranas Artificiais , Porfirinas/química , Estresse Fisiológico , Corantes Fluorescentes/química , Espectrometria de FluorescênciaRESUMO
Understanding and controlling electron transport through functional molecules are of primary importance to the development of molecular scale devices. In this work, the single molecule resistances of meso-to-meso ethyne-bridged (porphinato)zinc(II) structures (PZn(n) compounds), connected to gold electrodes via (4'-thiophenyl)ethynyl termini, are determined using scanning tunneling microscopy-based break junction methods. These experiments show that each α,ω-di[(4'-thiophenyl)ethynyl]-terminated PZn(n) compound (dithiol-PZn(n)) manifests a dual molecular conductance. In both the high and low conductance regimes, the measured resistance across these metal-dithiol-PZn(n)-metal junctions increases in a near linear fashion with molecule length. These results signal that meso-to-meso ethyne-bridged porphyrin wires afford the lowest ß value (ß = 0.034 Å(-1)) yet determined for thiol-terminated single molecules that manifest a quasi-ohmic resistance dependence across metal-dithiol-PZn(n)-metal junctions.
Assuntos
Nanoestruturas/química , Nanoestruturas/ultraestrutura , Porfirinas/química , Condutividade Elétrica , Transporte de Elétrons , Teste de Materiais , Tamanho da PartículaRESUMO
A macrocycle that integrates three ferrocene-pyrene dyads in a triangular C2-symmetric arrangement is synthesised as a racemate in a simple one-pot approach. Crystal structural analysis reveals two enantiomeric conformers that pack alternatingly via π-π stacking and interconvert dynamically in solution. Electrochemical investigations indicate weak electrostatic interactions between Fc groups upon oxidation to a mixed valence triangle.
RESUMO
Advanced functionality in molecular electronics and spintronics is orchestrated by exact molecular arrangements at metal surfaces, but the strategies for constructing such arrangements remain limited. Here, we report the synthesis and surface hybridization of a cyclophane that comprises two pyrene groups fastened together by two ferrocene pillars. Crystallographic structure analysis revealed pyrene planes separated by â¼352 pm and stacked in an eclipsed geometry that approximates the rare configuration of AA-stacked bilayer graphene. We deposited this cyclophane onto surfaces of Cu(111) and Co(111) at submonolayer coverage and studied the resulting hybrid entities with scanning tunnelling microscopy (STM). We found distinct characteristics of this cyclophane on each metal surface: on non-magnetic Cu(111), physisorption occurred and the two pyrene groups remained electronically coupled to each other; on ferromagnetic Co(111) nanoislands, chemisorption occurred and the two pyrene groups became electronically decoupled. Spin-polarized STM measurements revealed that the ferrocene groups had spin polarization opposite to that of the surrounding Co metal, while the pyrene stack had no spin polarization. Comparisons to the non-stacked analogue comprising only one pyrene group bolster our interpretation of the cyclophane's STM features. The design strategy presented herein can be extended to realize versatile, three-dimensional platforms in single-molecule electronics and spintronics.
RESUMO
The polymersome, a fully synthetic cell mimetic, is a tunable platform for drug delivery vehicles to detect and treat disease (theranostics). Here, we design a leuko-polymersome, a polymersome with the adhesive properties of leukocytes, which can effectively bind to inflammatory sites under flow. We hypothesize that optimal leukocyte adhesion can be recreated with ligands that mimic receptors of the two major leukocyte molecular adhesion pathways, the selectins and the integrins. Polymersomes functionalized with sialyl Lewis X and an antibody against ICAM-1 adhere avidly and selectively to surfaces coated with inflammatory adhesion molecules P-selectin and ICAM-1 under flow. We find that maximal adhesion occurs at intermediate densities of both sialyl Lewis X and anti-ICAM-1, owing to synergistic binding effects between the two ligands. Leuko-polymersomes bearing these two receptor mimetics adhere under physiological shear rates to inflamed endothelium in an in vitro flow chamber at a rate 7.5 times higher than those to uninflamed endothelium. This work clearly demonstrates that polymersomes bearing only a single ligand bind less avidly and with lower selectivity, thus suggesting proper mimicry of leukocyte adhesion requires contributions from both pathways. This work establishes a basis for the design of polymersomes for targeted drug delivery in inflammation.