RESUMO
It has been shown that a ferroelectric material integrated into the gate stack of a transistor can create an effective negative capacitance (NC) that allows the device to overcome "Boltzmann tyranny". While this switching below the thermal limit has been observed with Si-based NC field-effect transistors (NC-FETs), the adaptation to 2D materials would enable a device that is scalable in operating voltage as well as size. In this work, we demonstrate sustained sub-60 mV/dec switching, with a minimum subthreshold swing (SS) of 6.07 mV/dec (average of 8.03 mV/dec over 4 orders of magnitude in drain current), by incorporating hafnium zirconium oxide (HfZrO2 or HZO) ferroelectric into the gate stack of a MoS2 2D-FET. By first fabricating and characterizing metal-ferroelectric-metal capacitors, the MoS2 is able to be transferred directly on top and characterized with both a standard and a negative capacitance gate stack. The 2D NC-FET exhibited marked enhancement in low-voltage switching behavior compared to the 2D-FET on the same MoS2 channel, reducing the SS by 2 orders of magnitude. A maximum internal voltage gain of â¼28× was realized with â¼12 nm thick HZO. Several unique dependencies were observed, including threshold voltage (Vth) shifts in the 2D NC-FET (compared to the 2D-FET) that correlate with source/drain overlap capacitance and changes in HZO (ferroelectric) and HfO2 (dielectric) thicknesses. Remarkable sub-60 mV/dec switching was obtained from 2D NC-FETs of various sizes and gate stack thicknesses, demonstrating great potential for enabling size- and voltage-scalable transistors.
RESUMO
Atomic layer deposition (ALD) has matured into a preeminent thin film deposition technique by offering a highly scalable and economic route to integrate chemically dissimilar materials with excellent thickness control down to the subnanometer regime. Contrary to its extensive applications, a quantitative and comprehensive understanding of the reaction processes seems intangible. Complex and manifold reaction pathways are possible, which are strongly affected by the surface chemical state. Here, we report a combined modeling and experimental approach utilizing ReaxFF reactive force field simulation and in situ real-time spectroscopic ellipsometry to gain insights into the ALD process of Al2O3 from trimethylaluminum and water on hydrogenated and oxidized Ge(100) surfaces. We deciphered the origin for the different peculiarities during initial ALD cycles for the deposition on both surfaces. While the simulations predicted a nucleation delay for hydrogenated Ge(100), a self-cleaning effect was discovered on oxidized Ge(100) surfaces and resulted in an intermixed Al2O3/GeOx layer that effectively suppressed oxygen diffusion into Ge. In situ spectroscopic ellipsometry in combination with ex situ atomic force microscopy and X-ray photoelectron spectroscopy confirmed these simulation results. Electrical impedance characterizations evidenced the critical role of the intermixed Al2O3/GeOx layer to achieve electrically well-behaved dielectric/Ge interfaces with low interface trap density. The combined approach can be generalized to comprehend the deposition and reaction kinetics of other ALD precursors and surface chemistry, which offers a path toward a theory-aided rational design of ALD processes at a molecular level.