Uncovering the overcapacity feature of China's industry and the environmental & health co-benefits from de-capacity.

Overcapacity is regarded as an inevitable problem for rapid economic developing countries like China, which also causes serious adverse impacts on the environment and public health. However, few studies have quantified the overcapacity feature and corresponding co-benefit from de-capacity policy. To fill such research gaps, this study constructed a comprehensive assessment model by combining the Data Envelopment Analysis (DEA) model, the GAINS-China (Greenhouse gas - Air pollution Interactions and Synergies) model, and a meta-analysis and health impact assessment module, to measure the capacity utilization rate of 41 industrial sectors in 31 Chinese provinces and forecast the environmental and health co-benefits from de-capacity policy in 2050. Results showed that the capacity utilization rate of China's industry is 64.13% in 2018, which is much lower than the threshold value of 75%, indicating serious overcapacity in China's industry. Capacity utilization rates of light industries are higher (around 70%) than heavy industries (50%-60%), and the capacity utilization rate in East and South-Central China is higher (70%-96%) than West China (below 40%). Under a de-capacity scenario in 2050, China's CO2 and PM2.5 emissions are reduced by 1.05 billion tons (9.6%) and 57.8 kilotons (5.8%), respectively. This reduction in PM2.5 emissions results in a substantial health co-benefit, reducing national premature mortality cases by approximately 792,100 (1.6%). Finally, it is recommended that de-capacity priority be given to industries with low capacity utilization rate, as well as regions with intensive heavy industry or high levels of greenhouse gas emissions, severe air pollution, and dense population.

On the relationship between aerosol model uncertainty and radiative forcing uncertainty.

The largest uncertainty in the historical radiative forcing of climate is caused by the interaction of aerosols with clouds. Historical forcing is not a directly measurable quantity, so reliable assessments depend on the development of global models of aerosols and clouds that are well constrained by observations. However, there has been no systematic assessment of how reduction in the uncertainty of global aerosol models will feed through to the uncertainty in the predicted forcing. We use a global model perturbed parameter ensemble to show that tight observational constraint of aerosol concentrations in the model has a relatively small effect on the aerosol-related uncertainty in the calculated forcing between preindustrial and present-day periods. One factor is the low sensitivity of present-day aerosol to natural emissions that determine the preindustrial aerosol state. However, the major cause of the weak constraint is that the full uncertainty space of the model generates a large number of model variants that are equally acceptable compared to present-day aerosol observations. The narrow range of aerosol concentrations in the observationally constrained model gives the impression of low aerosol model uncertainty. However, these multiple "equifinal" models predict a wide range of forcings. To make progress, we need to develop a much deeper understanding of model uncertainty and ways to use observations to constrain it. Equifinality in the aerosol model means that tuning of a small number of model processes to achieve model-observation agreement could give a misleading impression of model robustness.

Occurrence of pristine aerosol environments on a polluted planet.

Natural aerosols define a preindustrial baseline state from which the magnitude of anthropogenic aerosol effects on climate are calculated and are a major component of the large uncertainty in anthropogenic aerosol-cloud radiative forcing. This uncertainty would be reduced if aerosol environments unperturbed by air pollution could be studied in the present--day atmosphere, but the pervasiveness of air pollution makes identification of unperturbed regions difficult. Here, we use global model simulations to define unperturbed aerosol regions in terms of two measures that compare 1750 and 2000 conditions-the number of days with similar aerosol concentrations and the similarity of the aerosol response to perturbations in model processes and emissions. The analysis shows that the aerosol system in many present-day environments looks and behaves like it did in the preindustrial era. On a global annual mean, unperturbed aerosol regions cover 12% of the Earth (16% of the ocean surface and 2% of the land surface). There is a strong seasonal variation in unperturbed regions of between 4% in August and 27% in January, with the most persistent conditions occurring over the equatorial Pacific. About 90% of unperturbed regions occur in the Southern Hemisphere, but in the Northern Hemisphere, unperturbed conditions are transient and spatially patchy. In cloudy regions with a radiative forcing relative to 1750, model results suggest that unperturbed aerosol conditions could still occur on a small number of days per month. However, these environments are mostly in the Southern Hemisphere, potentially limiting the usefulness in reducing Northern Hemisphere forcing uncertainty.

The Air Pollution Human Health Burden in Different Future Scenarios That Involve the Mitigation of Near-Term Climate Forcers, Climate and Land-Use.

Elevated surface concentrations of ozone and fine particulate matter (PM2.5) can lead to poor air quality and detrimental impacts on human health. These pollutants are also termed Near-Term Climate Forcers (NTCFs) as they can also influence the Earth's radiative balance on timescales shorter than long-lived greenhouse gases. Here we use the Earth system model, UKESM1, to simulate the change in surface ozone and PM2.5 concentrations from different NTCF mitigation scenarios, conducted as part of the Aerosol and Chemistry Model Intercomparison Project (AerChemMIP). These are then combined with relative risk estimates and projected changes in population demographics, to estimate the mortality burden attributable to long-term exposure to ambient air pollution. Scenarios that involve the strong mitigation of air pollutant emissions yield large future benefits to human health (25%), particularly across Asia for black carbon (7%), when compared to the future reference pathway. However, if anthropogenic emissions follow the reference pathway, then impacts to human health worsen over South Asia in the short term (11%) and across Africa (20%) in the longer term. Future climate change impacts on air pollutants can offset some of the health benefits achieved by emission mitigation measures over Europe for PM2.5 and East Asia for ozone. In addition, differences in the future chemical environment over regions are important considerations for mitigation measures to achieve the largest benefit to human health. Future policy measures to mitigate climate warming need to also consider the impact on air quality and human health across different regions to achieve the maximum co-benefits.

Emission Sector Impacts on Air Quality and Public Health in China From 2010 to 2020.

Anthropogenic emissions and ambient fine particulate matter (PM2.5) concentrations have declined in recent years across China. However, PM2.5 exposure remains high, ozone (O3) exposure is increasing, and the public health impacts are substantial. We used emulators to explore how emission changes (averaged per sector over all species) have contributed to changes in air quality and public health in China over 2010-2020. We show that PM2.5 exposure peaked in 2012 at 52.8 µg m-3, with contributions of 31% from industry and 22% from residential emissions. In 2020, PM2.5 exposure declined by 36% to 33.5 µg m-3, where the contributions from industry and residential sources reduced to 15% and 17%, respectively. The PM2.5 disease burden decreased by only 9% over 2012 where the contributions from industry and residential sources reduced to 15% and 17%, respectively 2020, partly due to an aging population with greater susceptibility to air pollution. Most of the reduction in PM2.5 exposure and associated public health benefits occurred due to reductions in industrial (58%) and residential (29%) emissions. Reducing national PM2.5 exposure below the World Health Organization Interim Target 2 (25 µg m-3) would require a further 80% reduction in residential and industrial emissions, highlighting the challenges that remain to improve air quality in China.

Sensitivity of Air Pollution Exposure and Disease Burden to Emission Changes in China Using Machine Learning Emulation.

Machine learning models can emulate chemical transport models, reducing computational costs and enabling more experimentation. We developed emulators to predict annual-mean fine particulate matter (PM2.5) and ozone (O3) concentrations and their associated chronic health impacts from changes in five major emission sectors (residential, industrial, land transport, agriculture, and power generation) in China. The emulators predicted 99.9% of the variance in PM2.5 and O3 concentrations. We used these emulators to estimate how emission reductions can attain air quality targets. In 2015, we estimate that PM2.5 exposure was 47.4 µg m-3 and O3 exposure was 43.8 ppb, associated with 2,189,700 (95% uncertainty interval, 95UI: 1,948,000-2,427,300) premature deaths per year, primarily from PM2.5 exposure (98%). PM2.5 exposure and the associated disease burden were most sensitive to industry and residential emissions. We explore the sensitivity of exposure and health to different combinations of emission reductions. The National Air Quality Target (35 µg m-3) for PM2.5 concentrations can be attained nationally with emission reductions of 72% in industrial, 57% in residential, 36% in land transport, 35% in agricultural, and 33% in power generation emissions. We show that complete removal of emissions from these five sectors does not enable the attainment of the WHO Annual Guideline (5 µg m-3) due to remaining air pollution from other sources. Our work provides the first assessment of how air pollution exposure and disease burden in China varies as emissions change across these five sectors and highlights the value of emulators in air quality research.

Air Pollution From Forest and Vegetation Fires in Southeast Asia Disproportionately Impacts the Poor.

Forest and vegetation fires, used as tools for agriculture and deforestation, are a major source of air pollutants and can cause serious air quality issues in many parts of Asia. Actions to reduce fire may offer considerable, yet largely unrecognized, options for rapid improvements in air quality. In this study, we used a combination of regional and global air quality models and observations to examine the impact of forest and vegetation fires on air quality degradation and public health in Southeast Asia (including Mainland Southeast Asia and south-eastern China). We found that eliminating fire could substantially improve regional air quality across Southeast Asia by reducing the population exposure to fine particulate matter (PM2.5) concentrations by 7% and surface ozone concentrations by 5%. These reductions in PM2.5 exposures would yield a considerable public health benefit across the region; averting 59,000 (95% uncertainty interval (95UI): 55,200-62,900) premature deaths annually. Analysis of subnational infant mortality rate data and PM2.5 exposure suggested that PM2.5 from fires disproportionately impacts poorer populations across Southeast Asia. We identified two key regions in northern Laos and western Myanmar where particularly high levels of poverty coincide with exposure to relatively high levels of PM2.5 from fires. Our results show that reducing forest and vegetation fires should be a public health priority for the Southeast Asia region.

Regional Policies Targeting Residential Solid Fuel and Agricultural Emissions Can Improve Air Quality and Public Health in the Greater Bay Area and Across China.

Air pollution exposure is a leading public health problem in China. The majority of the total air pollution disease burden is from fine particulate matter (PM2.5) exposure, with smaller contributions from ozone (O3) exposure. Recent emission reductions have reduced PM2.5 exposure. However, levels of exposure and the associated risk remain high, some pollutant emissions have increased, and some sectors lack effective emission control measures. We quantified the potential impacts of relevant policy scenarios on ambient air quality and public health across China. We show that PM2.5 exposure inside the Greater Bay Area (GBA) is strongly controlled by emissions outside the GBA. We find that reductions in residential solid fuel use and agricultural fertilizer emissions result in the greatest reductions in PM2.5 exposure and the largest health benefits. A 50% transition from residential solid fuel use to liquefied petroleum gas outside the GBA reduced PM2.5 exposure by 15% in China and 3% within the GBA, and avoided 191,400 premature deaths each year across China. Reducing agricultural fertilizer emissions of ammonia by 30% outside the GBA reduced PM2.5 exposure by 4% in China and 3% in the GBA, avoiding 56,500 annual premature deaths across China. Our simulations suggest that reducing residential solid fuel or industrial emissions will reduce both PM2.5 and O3 exposure, whereas other policies may increase O3 exposure. Improving particulate air quality inside the GBA will require consideration of residential solid fuel and agricultural sectors, which currently lack targeted policies, and regional cooperation both inside and outside the GBA.

Statistical Emulation of Winter Ambient Fine Particulate Matter Concentrations From Emission Changes in China.

Air pollution exposure remains a leading public health problem in China. The use of chemical transport models to quantify the impacts of various emission changes on air quality is limited by their large computational demands. Machine learning models can emulate chemical transport models to provide computationally efficient predictions of outputs based on statistical associations with inputs. We developed novel emulators relating emission changes in five key anthropogenic sectors (residential, industry, land transport, agriculture, and power generation) to winter ambient fine particulate matter (PM2.5) concentrations across China. The emulators were optimized based on Gaussian process regressors with Matern kernels. The emulators predicted 99.9% of the variance in PM2.5 concentrations for a given input configuration of emission changes. PM2.5 concentrations are primarily sensitive to residential (51%-94% of first-order sensitivity index), industrial (7%-31%), and agricultural emissions (0%-24%). Sensitivities of PM2.5 concentrations to land transport and power generation emissions are all under 5%, except in South West China where land transport emissions contributed 13%. The largest reduction in winter PM2.5 exposure for changes in the five emission sectors is by 68%-81%, down to 15.3-25.9 µg m-3, remaining above the World Health Organization annual guideline of 10 µg m-3. The greatest reductions in PM2.5 exposure are driven by reducing residential and industrial emissions, emphasizing the importance of emission reductions in these key sectors. We show that the annual National Air Quality Target of 35 µg m-3 is unlikely to be achieved during winter without strong emission reductions from the residential and industrial sectors.

Global atmospheric particle formation from CERN CLOUD measurements.

Fundamental questions remain about the origin of newly formed atmospheric aerosol particles because data from laboratory measurements have been insufficient to build global models. In contrast, gas-phase chemistry models have been based on laboratory kinetics measurements for decades. We built a global model of aerosol formation by using extensive laboratory measurements of rates of nucleation involving sulfuric acid, ammonia, ions, and organic compounds conducted in the CERN CLOUD (Cosmics Leaving Outdoor Droplets) chamber. The simulations and a comparison with atmospheric observations show that nearly all nucleation throughout the present-day atmosphere involves ammonia or biogenic organic compounds, in addition to sulfuric acid. A considerable fraction of nucleation involves ions, but the relatively weak dependence on ion concentrations indicates that for the processes studied, variations in cosmic ray intensity do not appreciably affect climate through nucleation in the present-day atmosphere.

The magnitude and sources of uncertainty in global aerosol.

Aerosol radiative forcing over the industrial period has remained the largest forcing uncertainty through all IPCC assessments since 1996. Despite the importance of this uncertainty for our understanding of past and future climate change, very little attention is given to the problem of uncertainty reduction in its own right, mainly because most uncertainty analysis approaches are not appropriate to computationally expensive global models. Here we show how a comprehensive understanding of global aerosol model parametric uncertainty can be obtained by using emulators. The approach enables a Monte Carlo sampling of the model uncertainty space based on a manageable number of simulations. This allows full probability density functions of model outputs to be generated from which the uncertainty and its causes can be diagnosed using variance decomposition. We apply this approach to global concentrations of particles larger than 3 and 50 nm diameter (N3 and N50) to produce a ranked list of twenty-eight processes and emissions that control the uncertainty. The results show that the uncertainty in N50 is much more strongly affected by emissions and processes that control the availability of gas phase H2SO4 than by uncertainties in the nucleation rate itself, which cause generally less than 10% uncertainty in N50 in July. Secondary organic aerosol production is assumed to be very uncertain (5-360 Tg a(-1) for biogenic emissions) but the effect on global N3 uncertainty is < 3% except in a few hotspots, and generally < 2% for N50. A complete understanding of the model uncertainty combined with global observations can be used to determine plausible and implausible parts of parameter space as well as to identify model structural weaknesses. In this direction, a preliminary comparison of the model ensemble with observations at Hyytiala, Finland, suggests that an organic-mediated boundary layer nucleation mechanism would help to optimise the behaviour of the model.