Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Anal Chem ; 93(2): 1016-1024, 2021 Jan 19.
Artigo em Inglês | MEDLINE | ID: mdl-33314923

RESUMO

We use extreme ultraviolet laser ablation and ionization time-of-flight mass spectrometry (EUV TOF) to map uranium isotopic heterogeneity at the nanoscale (≤100 nm). Using low-enriched uranium fuel pellets that were made by blending two isotopically distinct feedstocks, we show that EUV TOF can map the 235U/238U content in 100 nm-sized pixels. The two-dimensional (2D) isotope maps reveal U ratio variations in sub-microscale to ≥1 µm areas of the pellet that had not been fully exposed by microscale or bulk mass spectrometry analyses. Compared to the ratio distribution measured in a homogeneous U reference material, the ratios in the enriched pellet follow a ∼3× wider distribution. These results indicate U heterogeneity in the fuel pellet from incomplete blending of the different source materials. EUV TOF results agree well with those obtained on the same enriched pellets by nanoscale secondary ionization mass spectrometry (NanoSIMS), which reveals a comparable U isotope ratio distribution at the same spatial scale. EUV TOF's ability to assess and map isotopic heterogeneity at the nanoscale makes it a promising tool in fields such as nuclear forensics, geochemistry, and biology that could benefit from uncovering sub-microscale sources of chemical modifications.

2.
J Phys Chem A ; 122(35): 7062-7070, 2018 Sep 06.
Artigo em Inglês | MEDLINE | ID: mdl-30095914

RESUMO

Uranium dioxide (UO2) is a material with historical and emerging applications in numerous areas such as photonics, nuclear energy, and aerospace electronics. While often grown synthetically as single-crystal UO2, the mineralogical form of UO2 called uraninite is of interest as a precursor to various chemical processes involving uranium-bearing chemicals. Here, we investigate the optical and chemical properties of a series of three UO2 specimens: synthetic single-crystal UO2, uraninite ore of relatively high purity, and massive uraninite mineral containing numerous impurities. An optical technique called single-angle reflectance spectroscopy was used to derive the optical constants n and k of these uranium specimens by measuring the specular reflectance spectra of a polished surface across the mid- and far-infrared spectral domains (ca. 7000-50 cm-1). X-ray diffractometry, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were further used to analyze the surface composition of the mineralogical forms of UO2. Most notably, the massive uraninite mineral was observed to contain significant deposits of calcite and quartz in addition to UO2 (as well as other metal oxides and radioactive decay products). Knowledge of the infrared optical constants for this series of uranium chemicals facilitates nondestructive, noncontact detection of UO2 under a variety of conditions.

3.
Environ Sci Technol ; 49(11): 6474-84, 2015 Jun 02.
Artigo em Inglês | MEDLINE | ID: mdl-25815708

RESUMO

The speciation of U and Pu in soil and concrete from Rocky Flats and in particles from soils from Chernobyl, Hanford, Los Alamos, and McGuire Air Force Base and bottom sediments from Mayak was determined by a combination of X-ray absorption fine structure (XAFS) spectroscopy and X-ray fluorescence (XRF) element maps. These experiments identify four types of speciation that sometimes may and other times do not exhibit an association with the source terms and histories of these samples: relatively well ordered PuO2+x and UO2+x that had equilibrated with O2 and H2O under both ambient conditions and in fires or explosions; instances of small, isolated particles of U as UO2+x, U3O8, and U(VI) species coexisting in close proximity after decades in the environment; alteration phases of uranyl with other elements including ones that would not have come from soils; and mononuclear Pu-O species and novel PuO2+x-type compounds incorporating additional elements that may have occurred because the Pu was exposed to extreme chemical conditions such as acidic solutions released directly into soil or concrete. Our results therefore directly demonstrate instances of novel complexity in the Å and µm-scale chemical speciation and reactivity of U and Pu in their initial formation and after environmental exposure as well as occasions of unexpected behavior in the reaction pathways over short geological but significant sociological times. They also show that incorporating the actual disposal and site conditions and resultant novel materials such as those reported here may be necessary to develop the most accurate predictive models for Pu and U in the environment.


Assuntos
Plutônio/análise , Poluentes Radioativos do Solo/análise , Urânio/análise , Acidente Nuclear de Chernobyl , Colorado , New Jersey , New Mexico , Plutônio/química , Federação Russa , Espectrometria por Raios X , Ucrânia , Urânio/química , Washington
4.
ACS Appl Mater Interfaces ; 13(38): 45696-45707, 2021 Sep 29.
Artigo em Inglês | MEDLINE | ID: mdl-34542263

RESUMO

Two lanthanide-containing porous coordination polymers, [Ln2(bpdc)6(phen)2]·nH2O (1) and [Ln2(bpdc)6(terpy)2]·3H2O (2) (Ln = Pr, Nd, or Sm-Dy; bpdc: 2,2'-bipyridine-5,5'-dicarboxylic acid; phen: 1,10-phenanthroline; and terpy: 2,2':6',2″-terpyridine), have been hydrothermally synthesized and structurally characterized by powder and single-crystal X-ray diffraction. Crystallographic analyses reveal that compounds 1 and 2 feature Ln3+-containing dimeric nodes that form a porous two-dimensional (2D) and nonporous three-dimensional (3D) framework, respectively. Each material is stable in aqueous media between pH 3 and 10 and exhibits modest thermal stability up to ∼400 °C. Notably, a portion of the phen and bpdc ligands in 1 can be removed thermally, without compromising the crystal structure, causing the surface area and pore volume to increase. The optical properties of 1 and 2 with Gd3+, Sm3+, Tb3+, and Eu3+ are explored in the solid state using absorbance, fluorescence, and lifetime spectroscopies. The analyses reveal a complex blend of metal and ligand emission in the materials containing Sm3+ and Tb3+, while those featuring Eu3+ are dominated by intense metal-based emission. Compound 1 with Eu3+ shows promise for the capture and detection of the uranyl cation (UO2)2+ from aqueous media. In short, uranyl capture is observed at pH 4, and the adsorption thereof is detectable via vibrational and fluorescence spectroscopies and colorimetrically as the off-white color of 1 turns yellow with uptake. Finally, both 1 and 2 with Eu3+ produce bright red emission upon irradiation with Cu Kα X-ray radiation (8.04 keV) and are candidate materials for applications in solid-state scintillation.

5.
Talanta ; 211: 120720, 2020 May 01.
Artigo em Inglês | MEDLINE | ID: mdl-32070565

RESUMO

The ability to acquire high-quality spatially-resolved mass spectrometry data is sought in many fields of study, but it often comes with high cost of instrumentation and a high level of expertise required. In addition, techniques highly regarded for isotopic analysis applications such as thermal ionization mass spectrometry (TIMS) do not have the ability to acquire spatially-resolved data. Another drawback is that for radioactive materials, which are often of interest for isotopic analysis in geochemistry and nuclear forensics applications, high-end instruments often have restrictions on radioactivity and non-dispersibility requirements. We have applied the use of a traditional microanalysis tool, the focused ion beam/scanning electron microscope (FIB/SEM), for preparation of radioactive materials either for direct analysis by spatially-resolved instruments such as secondary ion mass spectrometry (SIMS) and laser ablation inductively-coupled mass spectrometry (LA-ICP-MS), or similarly to provide some level of spatial resolution to techniques that do not inherently have that ability such as TIMS or quadrupole inductively coupled plasma mass spectrometry (Q-ICP-MS). We applied this preparation technique to various uranium compounds, which was especially useful for reducing sample sizes and ensuring non-dispersibility to allow for entry into non-radiological or ultra-trace facilities. Our results show how this site-specific preparation can provide spatial context for nominally bulk techniques such as TIMS and Q-ICP-MS. In addition, the analysis of samples extracted from a uranium dioxide fuel pellet via all methods, but especially NanoSIMS and LA-ICP-MS, showed enrichment heterogeneities that are important for nuclear forensics and are of interest for fuel performance.

6.
J Phys Condens Matter ; 31(12): 125901, 2019 Mar 27.
Artigo em Inglês | MEDLINE | ID: mdl-30630150

RESUMO

A Phase Field model is developed combining the Orientation Field approach to modeling solidification with the Kim, Kim, Suzuki method of modeling binary alloys. These combined methods produce a model capable of simulating randomly oriented second phase dendrites with discrete control of the solid-liquid interface energy and thickness. The example system of carbon in a liquid uranium (U) melt is used as a test for the model. The formation of uranium carbide within a liquid U melt is simulated for isothermal conditions and compares well with experiments.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA