Engineering properties optimization of dispersive soil by calcium silicate waste-The role of steel-making slag.

Steel slag (SS) is a byproduct that comes from the production of crude steel in alkaline oxidation furnaces. Resource utilization of steel slag, a calcium-silicon solid waste, is an urgent problem. This paper investigates a solid waste disposal method that applies different steel slag contents to modify dispersive soil. The engineering properties and modification mechanisms of dispersive soil specimens are studied and revealed by performing microstructure, mineral evolution, unconfined compressive strength (UCS), and tensile strength analysis. The pinhole test, mud ball crumb test (BCT), and mud cube crumb test (CCT) were carried out to determine the dispersivity of the soil specimens. Results show that when the steel slag content increases from 1% to 10%, the unconfined compressive strength and tensile strength increase by 176.05% and 75.40%, respectively. For soil specimens without curing time under 50 mm water head, the weight loss of the specimen with 10% steel slag content decreases by 72.03% compared to specimens with 1% steel slag content. Microstructural and mineralogical analyses indicate that the hydration reaction of steel slag changes the ionic composition of the soil and generates reaction products with effects such as filling and connection. To sum up, steel slag effectively improves water stability and mechanical properties of dispersive soil.

Effect of Incorporating Polyvinyl Alcohol Fiber on the Mechanical Properties of EICP-Treated Sand.

Enzyme-induced calcium carbonate precipitation (EICP) technology can improve the strength of treated soil. But it also leads to remarkable brittleness of the soil. This study used polyvinyl alcohol (PVA) fiber combined with EICP to solidify sand. Through the unconfined compressive strength (UCS) test, the effect of PVA fiber incorporation on the mechanical properties of EICP-solidified sand was investigated; the distribution of CaCO3 in the sample and the microstructure of fiber-reinforced EICP-treated sand were explored through the calcium carbonate content (CCC) test and microscopic experiment. Compared with the sand treated by EICP, the strength and stiffness of the sand reinforced by the fiber combined with EICP were greatly improved, and the ductility was also improved to a certain extent. However, the increase of CCC was extremely weak, and the inhomogeneity of CaCO3 distribution was enlarged; the influence of fiber length on the UCS and CCC of the treated sand was greater than that of the fiber content. The improvement of EICP-solidified sand by PVA fiber was mainly due to the formation of a "fiber-CaCO3-sand" spatial structure system through fiber bridging, not the increase of CCC.