RESUMO
Herein we report the synthesis and characterization of spinel copper gallate (CuGa2O4) nanocrystals (NCs) with an average size of 3.7 nm via a heat-up colloidal reaction. CuGa2O4 NCs have a band gap of â¼2.5 eV and marked p-type character, in agreement with ab initio simulations. These novel NCs are demonstrated to be photoactive, generating a clear and reproducible photocurrent under blue light irradiation when deposited as thin films. Crucially, the ability to adjust the Cu/Ga ratio within the NCs, and the effect of this on the optical and electronic properties of the NCs, was also demonstrated. These results position CuGa2O4 NCs as a novel material for optoelectronic applications, including hole transport and light harvesting.
RESUMO
Non-coding RNAs (ncRNAs) are transcribed from the genome and do not encode proteins. In recent years, ncRNAs have attracted increasing attention as critical participants in gene regulation and disease pathogenesis. Different categories of ncRNAs, which mainly include microRNAs (miRNAs), long non-coding RNAs (lncRNAs), and circular RNAs (circRNAs), are involved in the progression of pregnancy, while abnormal expression of placental ncRNAs impacts the onset and development of adverse pregnancy outcomes (APOs). Therefore, we reviewed the current status of research on placental ncRNAs and APOs to further understand the regulatory mechanisms of placental ncRNAs, which provides a new perspective for treating and preventing related diseases.
Assuntos
MicroRNAs , RNA Longo não Codificante , Gravidez , Humanos , Feminino , Resultado da Gravidez , Placenta/metabolismo , RNA não Traduzido/metabolismo , MicroRNAs/genética , RNA Longo não Codificante/genéticaRESUMO
Methods for the fabrication of thin films with well controlled structure and properties are of great importance for the development of functional devices for a large range of applications. SILAR, the acronym for Successive Ionic Layer Adsorption and Reaction, is an evolution and combination of two other deposition methods, the Atomic Layer Deposition and Chemical Bath Deposition. Due to a relative simplicity and low cost, this method has gained increasing interest in the scientific community. There are, however, several aspects related to the influence of the many parameters involved, which deserve further deepening. In this review article, the basis of the method, its application to the fabrication of thin films, the importance of experimental parameters, and some recent advances in the application of oxide films are reviewed. At first the fundamental theoretical bases and experimental concepts of SILAR are discussed. Then, the fabrication of chalcogenides and metal oxides is reviewed, with special emphasis to metal oxides, trying to extract general information on the effect of experimental parameters on structural, morphological and functional properties. Finally, recent advances in the application of oxide films prepared by SILAR are described, focusing on supercapacitors, transparent electrodes, solar cells, and photoelectrochemical devices.
RESUMO
Climate change represents one of the most important environmental issues of our time. Due to high levels of anthropogenic CO2 emissions, atmospheric CO2 has for the first time ever exceeded 415 ppm and has increased from 315 ppm in 1950. An annual increase in atmospheric CO2 of â¼2 ppm is equal to a net increase of â¼15.6 billion tons of CO2. The combustion of fossil fuels for electricity and transportation is still the main reason accounting for the CO2 accumulation. On the top of that, fossil fuels are widely used in our modern industry for the productions of indispensable social staples. For instance, the millennia old thermal reduction of iron ore by charcoal or baked coal (3C + 2Fe2O3 â 4Fe + 3CO2) continues as the main method for the production of iron. The artificial fertilizer ammonia boosts the global population and is mainly produced from the Haber-Bosch process, in which hydrogen is generated via steam reforming of methane (CH4 + 2H2O â 4H2 + CO2). Sequestration and diminution of CO2 require the development of a portfolio of technologies on (1) efficient and long-term harvesting of renewable energy, that is, solar, not only for electricity but also directly as the energy force in vital chemical processes, wherever possible, (2) carbon-neutral processes to replace current industrial processes that emit vast amounts of CO2, such as iron and ammonia production, and (3) new, low-cost technologies for CO2 capture and conversion with particular interests in the exploration of CO2 as the feedstock for fuels or other valuable chemicals and materials. To this end, we conducted some studies on the sustainable synthesis of ammonia and iron with net-zero CO2 emissions and large-scale CO2 capture and conversion into fuels and high value nanocarbon products via electrolysis in molten salt(s) with the introduction of the Solar Thermal Electrochemical Process (STEP). In STEP, solar UV-visible energy is focused on a photovoltaic device that generates the electricity to drive the electrolysis, while concurrently the solar thermal energy is focused on a second system to generate heat for the electrolysis cell. The utilization of the full spectrum of sunlight in STEP results in a higher solar energy efficiency than other solar conversion processes. STEP has been applied to conduct (1) CO2-free ammonia synthesis from nitrogen and water with the aid of nano-Fe2O3 in a molten hydroxide electrolyte, (2) CO2-free production of iron via electrochemical reduction of iron ore in molten carbonate, (3) CO2 capture and conversion into nanostructured carbon products as well as fuels in molten or mixed molten electrolytes, and (4) organic electrosynthesis of benzoic acid from benzene without overoxidizing into CO2. In this Account, we highlight some recent achievements in these topics and propose that using STEP is a highly efficient strategy for saving energy and, consequently, the environment. STEP is an ideal tool that can theoretically be applied to all endothermic reactions.
RESUMO
Mercury (Hg) is a globally spread trace metal due to its long atmospheric residence time. Yet, our understanding of atmospheric processes (e.g., redox reactions and deposition) driving Hg cycling is still limited, especially in polar regions. The Antarctic continent, by virtue of its remoteness, is the perfect location to investigate Hg atmospheric processes in the absence of significant local anthropogenic impact. Here, we present the first 2 year record (2016-2017) of total suspended particulate mercury (PHg) concentrations along with a year-round determination of an Hg stable isotopic composition in particles collected at Zhongshan Station (ZSS), eastern Antarctic coast. The mean PHg concentration is 21.8 ± 32.1 pg/m3, ranging from 0.9 to 195.6 pg/m3, and peaks in spring and summer. The negative mass-independent fractionation of odd Hg isotopes (odd-MIF, average -0.38 ± 0.12 for Δ199Hg) and the slope of Δ199Hg/Δ201Hg with 0.91 ± 0.12 suggest that the springtime isotope variation of PHg is likely caused by in situ photo-oxidation and reduction reactions. On the other hand, the increase of PHg concentrations and the observed odd-MIF values in summer are attributed to the transport by katabatic winds of divalent species derived from the oxidation of elemental Hg in the inland Antarctic Plateau.
Assuntos
Mercúrio , Regiões Antárticas , Monitoramento Ambiental , Isótopos , Mercúrio/análise , Isótopos de Mercúrio/análise , Estações do AnoRESUMO
Carbon nanofibers, CNFs, due to their superior strength, conductivity, flexibility, and durability have great potential as a material resource but still have limited use due to the cost intensive complexities of their synthesis. Herein, we report the high-yield and scalable electrolytic conversion of atmospheric CO2 dissolved in molten carbonates into CNFs. It is demonstrated that the conversion of CO2 â CCNF + O2 can be driven by efficient solar, as well as conventional, energy at inexpensive steel or nickel electrodes. The structure is tuned by controlling the electrolysis conditions, such as the addition of trace transition metals to act as CNF nucleation sites, the addition of zinc as an initiator and the control of current density. A less expensive source of CNFs will facilitate its adoption as a societal resource, and using carbon dioxide as a reactant to generate a value added product such as CNFs provides impetus to consume this greenhouse gas to mitigate climate change.
RESUMO
The spatiotemporal distribution pattern of marine-origin matter on the Antarctica ice sheet was used to study variations in the source regions, transport mechanisms and post-depositional influences. We present data on sea salt ions, sulfur components and stable isotopes from surface and snow pit samples collected along the transect route from Zhongshan Station to Dome A during the austral summer in 2012-2013. A general decreasing trend in the accumulation, sea salt ions and sulfur components occurred with increasing distance from the coast and increasing elevation. However, different sources of the marine components, transport pathways and post-depositional influences were responsible for their different spatial distribution patterns. The marine ions in the coastal snow pit varied seasonally, with higher sea salt ion concentrations in the winter and lower concentrations in the summer; the opposite pattern was found for the sulfur compounds. The sea ice area surrounding Antarctica was the main source region for the deposited sea salt and the open sea water for the sulfur compounds. No significant trends in the marine-origin components were detected during the past 3 decades. Several periods of elevated deposition of sea salt ions were associated with lower temperatures (based on δD and δ(18)O) or intensified wind fields. In comparison to the sea salt ions, the sulfur concentrations exhibited the opposite distribution patterns and were associated with changes in the surrounding sea ice extent.
Assuntos
Monitoramento Ambiental , Poluentes Ambientais/análise , Neve/química , Regiões Antárticas , Estações do Ano , Compostos de Enxofre/análiseRESUMO
The newly-developed cavity ring-down laser absorption spectroscopy analyzer with special calibration protocols has enabled the direct measurement of atmospheric vapor isotopes at high spatial and temporal resolution. This paper presents real-time hydrogen and oxygen stable isotope data for atmospheric water vapor above the sea surface, over a wide range of latitudes spanning from 38°N to 69°S. Our results showed relatively higher values of δ(18)O and δ(2)H in the subtropical regions than those in the tropical and high latitude regions, and also a notable decreasing trend in the Antarctic coastal region. By combining the hydrogen and oxygen isotope data with meteoric water line and backward trajectory model analysis, we explored the kinetic fractionation caused by subsiding air masses and related saturated vapor pressure in the subtropics, and the evaporation-driven kinetic fractionation in the Antarctic region. Simultaneous observations of meteorological and marine variables were used to interpret the isotopic composition characteristics and influential factors, indicating that d-excess is negatively correlated with humidity across a wide range of latitudes and weather conditions worldwide. Coincident with previous studies, d-excess is also positively correlated with sea surface temperature and air temperature (Tair), with greater sensitivity to Tair. Thus, atmospheric vapor isotopes measured with high accuracy and good spatial-temporal resolution could act as informative tracers for exploring the water cycle at different regional scales. Such monitoring efforts should be undertaken over a longer time period and in different regions of the world.
Assuntos
Atmosfera , Hidrogênio/análise , Isótopos de Oxigênio/análise , Regiões Antárticas , Calibragem , Umidade , CinéticaRESUMO
BACKGROUND: Glyphosate is the most commonly used herbicide with potential neurotoxicity. However, limited epidemical evidence is found in the relationship between glyphosate and cognitive impairment, especially in the cognitive-disrupting sensitive elderly populations. OBJECTIVE: This study aimed to examine the association of urinary glyphosate exposure with cognitive impairment in the United State (US) older adults. METHODS: Cognitive impairment was determined by the following four tests: the Consortium to Establish a Registry for Alzheimer's disease (CERAD) Immediate Recall test (IR), the CERAD Delayed Recall tests (DR), the Animal Fluency (AF) test and the Digit Substitution test (DSST). Survey weighted logistic regression and restricted cubic splines were applied to evaluate and visualize the association between glyphosate and cognitive impairment. RESULTS: A total of 465 elderly adults were identified in the National Health and Nutrition Examination Survey (NHANES) 2013-2014 cycle, and among them, 83.87% individuals had detectable urinary levels of glyphosate (0.628âng/mL in average). After adjusting for the potential covariates, glyphosate was significantly linked to increased DR and AF impairment, and the corresponding ORs were 1.52 (1.01 to 2.30, pâ=â0.049) and 1.69 (1.11 to 2.59, pâ=â0.019), respectively. No significant association was identified between glyphosate and IR or DSST impairment. The RCS plot further confirmed the linear and positive relationships between glyphosate and DR and AF impairment. CONCLUSIONS: These findings suggested that exposure to glyphosate might be associated with declined cognitive function in the elderly, and it might be prudent to evaluate cognitive outcomes for aged individuals with glyphosate exposures.
Assuntos
Doença de Alzheimer , Transtornos Cognitivos , Disfunção Cognitiva , Idoso , Humanos , Inquéritos Nutricionais , Glifosato , Disfunção Cognitiva/induzido quimicamente , Disfunção Cognitiva/epidemiologia , Cognição , Transtornos Cognitivos/induzido quimicamente , Transtornos Cognitivos/epidemiologiaRESUMO
Heavy metals present a substantial threat to both the environment and human health. Considering the delicate ecological equilibrium of the Tibetan Plateau (TP) and its heightened susceptibility to anthropogenic impacts, scholarly attention has progressively turned toward the examination of heavy metal pollution within the plateau's environment. In this study, we conducted a comprehensive analysis of various heavy metals (As, Cr, Co, Ni, Cu, Mo, Cd, Pb, and Sb), utilizing topsoil samples collected from the TP during the period of 2018-2021. Additionally, snow and cryoconite samples obtained from TP glaciers during the same timeframe were also subjected to analysis. The results indicate elevated concentrations of total heavy metals in the eastern and western TP (328.7 µg/g), as opposed to the central and southern TP (145.7 µg/g). Most heavy metals exhibit a consistent spatial distribution pattern. High Enrichment Factors (EFs) and Geoaccumulation Index (Igeo) values for As and Cd suggest their enrichment in TP topsoil. Receptor modeling identified three primary sources of heavy metals within the topsoil: industrial sources (42.3%), inherent natural sources within the surface soil (20.6%), and vehicular emissions (14.2%). Substantial differences in heavy metal concentrations and spatial distribution were observed between the topsoil and the glacial snow-cryoconite matrix. The prominent presence of Sb in the snow-cryoconite matrix, in contrast to its low abundance in the topsoil, indicates distinct source influences of long-range transported materials between the two environments. Our inference suggests that the influence of heavy metals from distant pollutants undergo mixing and dilution in the topsoil due to the presence of local indigenous heavy metals, although such influence is notably observed on the glacier surface of the TP. Consequently, this underscores the significant impact of long-range transported sources on heavy metals, surpassing the influence of local TP soils, to the alpine glaciers and even other atmospheric sediments in Tibetan Plateau.
Assuntos
Metais Pesados , Poluentes do Solo , Humanos , Tibet , Camada de Gelo , Cádmio/análise , Monitoramento Ambiental/métodos , Metais Pesados/análise , Solo , Poluentes do Solo/análise , China , Medição de RiscoRESUMO
Polydimethylsiloxane (PDMS) elastomers with high mechanical and healing properties are developed as smart materials for electrical power systems and electronic devices to address electrical or mechanical damage. However, the challenge is to reconcile the conflicting molecular mechanisms of mechanical and healing properties in the development of PDMS elastomers. This study adopts the "rigid-while-flexible" mutual network structure by copolymerizing the rigid polyimide (PI) with flexible segments with dynamic reversible crosslinking designed on the PDMS backbones. This elastomer (designated PSiPI) exhibits high toughness, tensile strength and elongation at break, as well as excellent healing efficiency and recyclability. Moreover, the PSiPI elastomer also exhibits good insulation and corona damage healing properties. Taking advantage of the recyclability and healing properties of PSiPI elastomers, healable superhydrophobic coatings with contact angles greater than 150° have been prepared by compositing PSiPI elastomers with SiO2. Likewise, combining the elastomer with conductive materials can create a healing flexible conductor. This "rigid-while-flexible" design approach provides important inspiration for the development of high-performance, sustainable and environmentally friendly PDMS elastomers for electrical and electronic applications.
RESUMO
Melting of Himalayan glaciers can be accelerated by the deposition of airborne black carbon and mineral dust as it leads to significant reductions of the surface albedo of snow and ice. Whereas South Asia has been shown a primary source region to these particles, detailed sources of these aerosol pollutants remain poorly understood. In this study, the chemical compositions of snow pit samples collected from Jima Yangzong glacier in the central Himalayas were analyzed to obtain information of atmospheric aerosols deposited from summer 2009 to spring 2010. Especially, an Aerodyne high resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS) was used for the first time to chemically characterize the dissolved organic and inorganic matter (DOM and DIM) in snow samples. The concentrations of these species varied seasonally, with high levels observed during the winter-spring period and low levels during the summer monsoon period. On average, the dissolved substances was dominated by organics (58%) with important contributions from inorganic species, NO3(-) (12.5%), Ca(2+) (9.1%), NH4(+) (8.7%), and SO(4)(2-) (8.1%). DOM was found more oxidized with an average (± 1σ) atomic oxygen-to-carbon ratio (nO/nC) of 0.64 (± 0.14) and organic mass-to-carbon ratio (OM/OC) of 2.01 (± 0.19) during the winter-spring periods compared to the summer season (nO/nC = 0.31 ± 0.09 and OM/OC = 1.58 ± 0.12). In addition, biomass burning particles were found significantly enhanced in snow during the winter-spring periods, consistent with HYSPLIT back trajectory analysis of air mass history, which indicates prevailing atmospheric transport from northwest India and Nepal.
Assuntos
Poluentes Atmosféricos/análise , Camada de Gelo/química , Neve/química , Índia , Espectrometria de Massas , NepalRESUMO
The development of high-performing p-type transparent conducting oxides will enable immense progress in the fabrication of optoelectronic devices including invisible electronics and all-oxide power electronics. While n-type transparent electrodes have already reached widespread industrial production, the lack of p-type counterparts with comparable transparency and conductivity has created a bottleneck for the development of next-generation optoelectronic devices. In this work, we present the fabrication of delafossite copper chromium oxide p-type transparent electrodes with outstanding optical and electrical properties. These layers were deposited using ultrasonic spray pyrolysis, a wet chemical method that is fast, simple, and scalable. Through careful screening of the deposition conditions, highly crystalline, dense, and smooth CuCrO2 coatings were obtained. A detailed investigation of the role played by the deposition temperature and the cation ratio enabled the properties of the prepared layers to be reliably tuned, as verified using X-ray diffraction, X-ray photoelectron spectroscopy, optical spectroscopy, Hall effect measurements, and electron and atomic force microscopies. We demonstrate record conductivities for solution-processed CuCrO2, exceeding 100 S cm-1, and we also obtained the highest value for two separate figures of merit for p-type transparent conducting oxides. These performances position solution-deposited CuCrO2 as the leading p-type transparent-conducting oxide currently available.
RESUMO
Iron (Fe) is an essential micronutrient in glacial ecosystems and modulates global biogeochemical cycles. To find out the deposition concentration, multiple origins and release form of iron in various glacier areas of central Asia, this study investigated the total Fe (TFe) and dissolved-Fe (dFe, diameter < 0.45 or <0.2 µm) deposition in glaciers and snowpack of northeast Tibetan Plateau, based on snow and meltwater sampling in ablation period of 2014-2017. The composition and concentration of dFe in the samples were measured, and the spatial distribution and temporal variations of dFe in glacial surface snow and meltwater runoff were investigated. Results showed that average TFe and dFe contents exhibited a generally heterogeneous geographic distribution that varied from north to south. The northern locations in eastern Tianshan Mountains (e.g. Miaoergou Glacier) showed the highest TFe and dFe values, followed by Yuzhufeng Glacier of eastern Kunlun Mountains, whereas the Qilian Mountains locations displayed relatively lower TFe and dFe contents spanning a wide range. Based on the good correlation between TFe and dFe, we infer that aeolian dust and anthropogenic aerosols, and their chemical interactions are likely the important origins for dFe deposition. In meltwater runoff the peak values of dFe release flux appeared in July, with maximum appeared earlier (the early of July) than TFe (the end of July). Moreover, the annual dFe release flux from Laohugou glacier terminus meltwater runoff is estimated to be 1740 kg yr-1 (with 9256 kg yr-1 for TFe), and meltwater showed higher mean concentration of dFe than that of glacier snowpack. We also provided a conceptual framework showing the multiple origins and transport dynamics of dissolved Fe along the atmosphere-glacier-meltwater runoff path. Compared to Fe release in other global glacier/ice-sheet, the TP glacier is an important potential dFe reservoir and may have a profound effect on regional downstream ecosystem through Fe biochemistry cycle.
Assuntos
Ecossistema , Camada de Gelo , Monitoramento Ambiental/métodos , Camada de Gelo/química , Ferro , TibetRESUMO
Mineral dust can indirectly affect the climate by supplying bioavailable iron (Fe) to the ocean. Here, we present the records of dissolved Fe (DFe) and total Fe (TDFe) in North Greenland Eemian Ice Drilling (NEEM) ice core over the past 110 kyr BP. The Fe records are significantly negatively correlated with the carbon-dioxide (CO2) concentrations during cold periods. The results suggest that the changes in Fe fluxes over the past 110 kyr BP in the NEEM ice core are consistent with those in Chinese loess records because the mineral-dust distribution is controlled by the East Asian deserts. Furthermore, the variations in the dust input on a global scale are most likely driven by changes in solar radiation during the last glacial-interglacial cycle in response to Earth's orbital cycles. In the last glacial-interglacial cycle, the DFe/TDFe ratios were higher during the warm periods (following the post-Industrial Revolution and during the Holocene and last interglacial period) than during the main cold period (i.e. the last glacial maximum (LGM)), indicating that the aeolian input of iron and the iron fertilization effect on the oceans have a non-linear relationship during different periods. Although the burning of biomass aerosols has released large amounts of DFe since the Industrial Revolution, no significant responses are observed in the DFe and TDFe variations during this period, indicating that severe anthropogenic contamination has no significant effect on the DFe (TDFe) release in the NEEM ice core.
RESUMO
Aiming at solving the issue of wastewater purification, this work synthesized NH2-MIL-88B (Fe α In1-α ) photocatalysts by a simple one-pot method, which was employed for photocatalytic reduction of Cr(vi) and oxidation of TC-HCl. Compared with traditional NH2-MIL-88B (Fe) photocatalysts, NH2-MIL-88B (Fe0.6In0.4) displayed excellent photocatalytic performance; the photocatalytic redox rate for Cr(vi) and TC-HCl reached 86.83% and 72.05%, respectively. The good photocatalytic performance might be attributed to the metal-to-metal charge transition (MMCT) between Fe-O clusters and In-O clusters formed by doping In(iii) into NH2-MIL-88B (Fe), which provides effective active sites for the photocatalytic reduction and oxidation routes. Besides, the synergistic effect of the ligand-to-metal charge transition (LMCT) and MMCT expands the separation and transfer of photogenerated carriers and inhibits the recombination of electron-hole pairs, thus effectively improving the photocatalytic performance. Therefore, this work could provide a new method for the construction of mixed metal MOFs for the photocatalytic degradation of pollutants.
RESUMO
Two Australian native wooden sources (Acacia Mangium and Eucalyptus Globulus) derived pulps were explored as raw feed stocks to prepare the valuable nanomaterial of cellulose nanocrystals (CNC). After bleaching and acid hydrolysis, cellulose nanocrystals were successfully produced with high yields of approximately 60% for both kraft pulps. According to the characterization of SEM and AFM, the as prepared CNC had a rod like structure with the length and diameter in the range of 200~1000 nm and 10~100 nm, respectively based on the initial wooden source. XRD confirmed the crystalline structure of the resulting CNC. Further characterisation by TGA showed that the chemical treatment of the wood pulp had impact upon the thermal stability, evidenced by a lower onset temperature of the thermal decomposition of CNC.
RESUMO
The massive release of the greenhouse gas CO2 has resulted in numerous environmental issues. In searching for advanced technologies for CO2 capture/conversions, recent advances in electrochemical reduction of CO2 in molten salts shed a light on potential solutions to CO2 mitigation. Electro-reduction of CO2 in molten salts exhibits features like high selectivity and efficiency towards sustainable carbons and fuels, low toxicity, and possibility to combine with inâ situ CO2 capture. In this Minireview, we highlight the tuning of the products in this process and mainly discuss two categories of electrolyte, carbonate-based molten salts (CMS) and those based on halides (HMS). Depending on the synthetic conditions, fuels such as CO or hydrocarbons (in the presence of hydrogen source, i. e., LiOH, NaOH, or KOH in the electrolyte) as well as high-value nanostructured carbons including carbon nanotubes, carbon nanofibers, carbon nano-onions, and graphene can be obtained with high efficiency. The synthesis parameters are compared, and the applications of as-obtained carbons are briefly summarized. Additionally, some perspectives on this technology are also discussed.
RESUMO
An Ag/AgCl/NH2-UiO-66 hybridized photocatalyst was successfully constructed via facile solvothermal with UV reduction method for efficient photocatalytic Cr (VI) reduction. The photoelectrochemical data indicate that compared with the UiO-66, the charge separation and transfer efficiency of Ag/AgCl/NH2-UiO-66 heterojunction is significantly enhanced due to the introduction of amine functionalization and formation of inorganic-organic hybrid. The surface plasmon resonance (SPR) effect deriving from Ag nanoparticles (NPs) largely extends photo-response range whilst the separation efficiency of photo-generated electrons and holes is improved significantly. The synthesized Ag/AgCl/NH2-UiO-66 hybrid system shows ameliorated structural stability and superior photocatalytic activity for Cr (VI) reduction under visible light irradiation, which is 1.7 times higher than that of the bare UiO-66. Furthermore, the possible mechanism of Cr (VI) reduction is proposed by analyzing electron transfer path in the ternary Ag/AgCl/NH2-UiO-66 hybridized system.
RESUMO
A series of 42 snow samples covering over a one-year period from the fall of 2004 to the summer of 2005 were collected from a 2.1-m snow pit at a high-altitude site on the northeastern slope of Mt. Everest. These samples were analyzed for Al, V, Cr, Mn, Co, Ni, Cu, Zn, As, Rb, Sr, Cd, Sb, Pb, and Bi in order to characterize the relative contributions from anthropogenic and natural sources to the fallout of these elements in central Himalayas. Our data were also considered in the context of monsoon versus non-monsoon seasons. The mean concentrations of the majority of the elements were determined to be at the pg g(-1) level with a strong variation in concentration with snow depth. While the mean concentrations of most of the elements were significantly higher during the non-monsoon season than during the monsoon season, considerable variability in the trace element inputs to the snow was observed during both periods. Cu, Zn, As, Cd, Sb, and Bi displayed high crustal enrichment factors (EFc) in most samples, while Cr, Ni, Rb, and Pb show high EFc values in some of the samples. Our data indicate that anthropogenic inputs are potentially important for these elements in the remote high-altitude atmosphere in the central Himalayas. The relationship between the EFc of each element and the Al concentration indicates that a dominant input of anthropogenic trace elements occurs during both the monsoon and non-monsoon seasons, when crustal contribution is relatively minor. Finally, a comparison of the trace element fallout fluxes calculated in our samples with those recently obtained at Mont Blanc, Greenland, and Antarctica provides direct evidence for a geographical gradient of the atmospheric pollution with trace elements on a global scale.