RESUMO
We describe a new case of enteropathy with villous atrophy in a patient suffering from arterial hypertension treated with olmesartan. The molecular and serological studies showed anti-nuclear antibodies (ANA) and haplotype HLA-DQ2 positive, as well as negative results for anti-transglutaminase, anti-endomysium and anti-enterocytes antibodies. A duodenal villous atrophy was suspected by upper gastrointestinal endoscopy, which was confirmed by histopathology. The morphological picture was suggestive of sprue-like enteropathy with severe lymphoid infiltration and predominant T lymphoid cells.
Assuntos
Anticorpos Antinucleares/imunologia , Anticolesterolemiantes/efeitos adversos , Doença Celíaca/diagnóstico por imagem , Gastroenteropatias/induzido quimicamente , Gastroenteropatias/diagnóstico por imagem , Antígenos HLA-DQ/genética , Imidazóis/efeitos adversos , Tetrazóis/efeitos adversos , Idoso , Atrofia , Gastroenteropatias/genética , Genótipo , Humanos , MasculinoRESUMO
In this study, a new composite material is developed using a semi bio-based polypropylene (bioPP) and micronized argan shell (MAS) byproducts. To improve the interaction between the filler and the polymer matrix, a compatibilizer, PP-g-MA, is used. The samples are prepared using a co-rotating twin extruder followed by an injection molding process. The addition of the MAS filler improves the mechanical properties of the bioPP, as evidenced by an increase in tensile strength from 18.2 MPa to 20.8 MPa. The reinforcement is also observed in the thermomechanical properties, with an increased storage modulus. The thermal characterization and X-ray diffraction indicate that the addition of the filler leads to the formation of α structure crystals in the polymer matrix. However, the addition of a lignocellulosic filler also leads to an increased affinity for water. As a result, the water uptake of the composites increases, although it remains relatively low even after 14 weeks. The water contact angle is also reduced. The color of the composites changes to a color similar to wood. Overall, this study demonstrates the potential of using MAS byproducts to improve their mechanical properties. However, the increased affinity with water should be taken into account in potential applications.
RESUMO
Beer bagasse is a residue waste produced in great amounts; nevertheless, it is still underestimated in the industry. The aim of this paper is to develop an innovative and efficient methodology to recycle the beer bagasse by producing Poly-lactic acid(PLA)-based bio-composites, in the forms of pellets and filaments, to be used in additive manufacturing processes. To assess the suitability of beer bagasse for extrusion-based 3D printing techniques, it was, firstly, physically and chemically characterized. Then, it was added in combination with different kinds of plasticizers to PLA to make bio-composites, analyzing their thermal and physical properties. The results prove the great potential of bagasse, evidencing its printability. Both composites' pellets and filaments were used in two different 3D printing machines and the mechanical properties of the 3D-printed models were evaluated as a function of the composition and the kind of technology used. All the used plasticizers improved processability and the polymer-bagasse interface. Compared to neat PLA, no changes in thermal properties were detected, but a lowering of the mechanical properties of the 3D-printed composites compared to the neat polymers was observed. Finally, a comparison between the efficiency of the two 3D printing techniques to be used with the bio-based composites was performed.
RESUMO
In this study, binary blends of biodegradable polymers were prepared to improve the ductile properties of those that have a more rigid and/or brittle behaviour. Specifically, PLA, PHA and TPS were blended with different amounts of PBS with the objective of reducing the stiffness and brittleness of the three polymers. The compatibility of the blends and their resulting mechanical properties were studied. The flexibility of the blends increased with the addition of PBS; however, a limited compatibility was achieved, leading to a low impact resistance improvement. For this reason, other blend options with an EVA-based material were studied, increasing the impact resistance and flexibility of the PLA material in this case.
RESUMO
The present study reports on the development of wood plastic composites (WPC) based on micronized argan shell (MAS) as a filler and high-density polyethylene obtained from sugarcane (Bio-HDPE), following the principles proposed by the circular economy in which the aim is to achieve zero waste by the introduction of residues of argan as a filler. The blends were prepared by extrusion and injection molding processes. In order to improve compatibility between the argan particles and the green polyolefin, different compatibilizers and additional filler were used, namely polyethylene grafted maleic anhydride (PE-g-MA 3 wt.-%), maleinized linseed oil (MLO 7.5 phr), halloysite nanotubes (HNTs 7.5 phr), and a combination of MLO and HNTs (3.75 phr each). The mechanical, morphological, thermal, thermomechanical, colorimetric, and wettability properties of each blend were analyzed. The results show that MAS acts as a reinforcing filler, increasing the stiffness of the Bio-HDPE, and that HNTs further increases this reinforcing effect. MLO and PE-g-MA, altogether with HNTs, improve the compatibility between MAS and Bio-HDPE, particularly due to bonds formed between oxygen-based groups present in each compound. Thermal stability was also improved provided by the addition of MAS and HNTs. All in all, reddish-like brown wood plastic composites with improved stiffness, good thermal stability, enhanced compatibility, and good wettability properties were obtained.
RESUMO
No disponible