Applicability of an In-Vitro Digestion Model to Assess the Bioaccessibility of Phenolic Compounds from Olive-Related Products.

The Mediterranean diet includes virgin olive oil (VOO) as the main fat and olives as snacks. In addition to providing nutritional and organoleptic properties, VOO and the fruits (olives) contain an extensive number of bioactive compounds, mainly phenolic compounds, which are considered to be powerful antioxidants. Furthermore, olive byproducts, such as olive leaves, olive pomace, and olive mill wastewater, considered also as rich sources of phenolic compounds, are now valorized due to being mainly applied in the pharmaceutical and nutraceutical industries. The digestive system must physically and chemically break down these ingested olive-related products to release their phenolic compounds, which will be further metabolized to be used by the human organism. The first purpose of this review is to provide an overview of the current status of in-vitro static digestion models for olive-related products. In this sense, the in-vitro gastrointestinal digestion methods are widely used with the following aims: (i) to study how phenolic compounds are released from their matrices and to identify structural changes of phenolic compounds after the digestion of olive fruits and oils and (ii) to support the functional value of olive leaves and byproducts generated in the olive industry by assessing their health properties before and after the gastrointestinal process. The second purpose of this review is to survey and discuss all the results available to date.

The effect of two antifungal commercial formulations on the metabolism of a commercial Saccharomyces cerevisiae strain and their repercussion on fermentation evolution and phenylalanine catabolism.

The effect of two commercial formulations (incorporating mepanipyrim and tetraconazole as active substances) on the metabolism of Saccharomyces cerevisiae Lalvin T73™, growing on a synthetic grape must, and their influence on the alcoholic fermentation course and the biosynthesis of volatiles derived from phenylalanine catabolism was studied. No relevant effects were observed for mepanipyrim except for glycerol production. On the contrary, in the presence of tetraconazole many genes and some proteins related to cell cycle progression and mitosis were repressed. This fact could explain the lower biomass concentration and the lower sugar consumption registered for tetraconazole at the end of the study. However, the biomass-to-ethanol yield was higher in connection with the overexpression of the ADH1 gene. The presence of tetraconazole residues seems to accelerate the Ehrlich pathway. These results agree with the overexpression of several genes (BAT1, PDC1, PDC5, ADH1, SFA1, ATF2, PFK1, PFK2 and ARO3) and a higher abundance of two proteins (Gap1p and Atf2p) involved in this metabolic pathway.

Dissipation of Three Fungicides and Their Effects on Anthocyanins and Color of Monastrell Red Wines.

The effect of fungicides on fermentation is of paramount importance to control the quality and safety of wines. In this work, the quality (enological parameters, color, phenolic content, antioxidant activity, and fungicide residues) of wines from Monastrell grapes fortified with iprovalicarb, mepanipyrim, and tetraconazole fungicides was evaluated. Along the winemaking process, initial residues of mepanipyrim and tetraconazole were removed in more than 90% while the dissipation of iprovalicarb was around 73%. Significant statistical differences were found in the presence of iprovalicarb and mepanipyrim residues, especially at the highest concentration assayed. For both fungicides, increases in the volatile acidity (between 4 and 8.6 times), the lactic acid content (between 8.6 and 20.5 times), the percentage of polymeric anthocyanins (between 1.3 and 1.7 times), and also a slight increase of the total phenolic index and the total anthocyanin content determined by spectrophotometry were observed. On the contrary, the total monomeric anthocyanins content decreased about 16.3% and 28.6% in the presence of iprovalicarb and mepanipyrim, respectively. These results could be related to a higher development of acetic acid or lactic bacteria in the presence of these fungicides. The color of the final wines was also different in comparison with the control, with a higher yellow component, color intensity, tonality, and hue angle because of pH changes in the medium. Tetraconazole fermentations had a more similar trend to the control wine, probably due to the lower concentration of this fungicide in the grape must at the initial time. No effects on the antioxidant activity was observed for any of the target fungicides. A multivariate statistical analysis was done to view the interrelationships between different variables (color and anthocyanins profile). The obtained model allowed the wines to be separated according to the fungicide treatment applied.

Wine aroma compounds in grapes: a critical review.

Volatile organic compounds are vital to wine quality, determining their aroma and varietal characteristics. Which are present, and in what quantity, depends on the cultivar, the situation and soil of the vineyard, weather, cultivation methods, and wine-making practices. Here, we review the literature on the development of wine aroma compounds in grapes, and how it is affected by the above-named factors. Increasing understanding of these processes at the molecular level will aid vine growers in the optimal selection of harvest dates and other decisions favoring the consistent production of balanced, flavorful berries.

Effects of sugar concentration processes in grapes and wine aging on aroma compounds of sweet wines­a review.

Dessert sweet wines from Europe and North America are described in this review from two points of view: both their aroma profile and also their sensorial description. There are growing literature data about the chemical composition and sensory properties of these wines. Wines were grouped according to the production method (concentration of sugars in grapes) and to the aging process of wine (oxidative, biological, or a combination of both and aging in the bottle). It was found that wines natively sweets and wines fortified with liquors differ in their volatile compounds. Sensory properties of these wines include those of dried fruit (raisins), red berries, honey, chocolate and vanilla, which is contributing to their growing sales. However, there is still a need for scientific research on the understanding of the mechanisms for wine flavor enhancement.

A review on the fermentation of foods and the residues of pesticides-biotransformation of pesticides and effects on fermentation and food quality.

Residues of pesticides in food are influenced by processing such as fermentation. Reviewing the extensive literature showed that in most cases, this step leads to large reductions in original residue levels in the fermented food, with the formation of new pesticide by-products. The behavior of residues in fermentation can be rationalized in terms of the physical-chemical properties of the pesticide and the nature of the process. In addition, the presence of pesticides decrease the growth rate of fermentative microbiota (yeasts and bacterias), which provokes stuck and sluggish fermentations. These changes have in consequence repercussions on several aspects of food sensory quality (physical-chemical properties, polyphenolic content, and aromatic profile) of fermented food. The main aim of this review is to deal with all these topics to propose challenging needs in science-based quality management of pesticides residues in food.

High-throughput HPLC-MS/MS determination of the persistence of neonicotinoid insecticide residues of regulatory interest in dietary bee pollen.

The aim of this work is the development of a simple, fast, quantitative, and economic method for the determination of neonicotinoid insecticide residues in dietary bee pollen. Several parameters of the method, such as extraction solvent, extraction time, and solid-phase extraction sorbents for purification [silica, C18, primary-secondary amine (PSA), and Envi-Carb II/PSA], were studied. The final proposed method based on solid-liquid extraction with hexane, cleanup with Supelclean™ Envi-Carb II/PSA cartridges, and subsequent analysis by high-performance liquid chromatography with tandem mass spectrometry was validated and applied to the analysis of commercial bee pollen samples from different geographical zones. Method performance was assessed by the evaluation of several quality parameters of the method, such as recovery values, repeatability, reproducibility, linearity, and limits of detection and quantification. Matrix effects on the chromatographic signal were also studied. The quality parameters of the method were equivalent to or better than those obtained with previously published methods, with recoveries between 81 and 99% and repeatabilities lower than 8.8%. The detection and quantification limits were in the ranges 0.2-2.2 µg kg(-1) and 0.4-4.3 µg kg(-1), respectively.

Effect of two anti-fungal treatments (metrafenone and boscalid plus kresoxim-methyl) applied to vines on the color and phenol profile of different red wines.

The effect of two anti-fungal treatments (metrafenone and boscalid + kresoxim-methyl) on the color and phenolic profile of Tempranillo and Graciano red wines has been studied. To evaluate possible modifications in color and phenolic composition of wines, control and wines elaborated with treated grapes under good agricultural practices were analyzed. Color was assessed by Glories and CIELab parameters. Color changes were observed for treated wines with boscalid + kresoxim-methyl, leading to the production of wines with less color vividness. Phenolic profile was characterized by HPLC analysis. Boscalid + kresoxim-methyl treatment promoted the greatest decrease on the phenolic content in wines.

Contribution of critical doses of iprovalicarb, mepanipyrim and tetraconazole to the generation of volatile compounds from Monastrell-based wines.

The individual effects of iprovalicarb, mepanipyrim, and tetraconazole on the volatile composition and aromatic profile of Monastrell-based wines were evaluated. To date, no studies about the effect of these fungicides on Monastrell-based wines are available, and the effect on other grape varieties is also unknown. Fungicides were added separately in the cellar to the grape must at two concentration levels (4 and 10 mg/kg for iprovalicarb and mepanipyrim and 1 and 2.5 mg/kg for tetraconazole). The aromatic composition of the final wines was analysed by gas chromatography using flame ionisation and ion trap mass selective detectors. In the presence of fungicides, the most significant variations were observed for isoamyl acetate and 2-phenylethyl acetate (increasing between 20 and 43% compared with the control wine) and ethyl caprate and caprylate (increasing between 12 and 68%). Consequently, treated wines showed a higher global odourant intensity, with increased fresh fruit notes.

Influence of tetraconazole on the proteome profile of Saccharomyces cerevisiae Lalvin T73™ strain.

This work aimed to evaluate the modifications on the proteome profile of Saccharomyces cerevisiae T73™ strain as a consequence of its adaptive response to the presence of tetraconazole molecules in the fermentation medium. Pasteurised grape juices were separately supplemented with tetraconazole or a commercial formulation containing 12.5% w/v of tetraconazole at two concentration levels. In addition, experiments without fungicides were developed for comparative purposes. Proteome profiles of yeasts cultured in the presence or absence of fungicide molecules were different. Independently of the fungicide treatment applied, the highest variations concerning the control sample were observed for those proteins involved in metabolic processes, especially in the metabolism of nitrogen compounds. Tetraconazole molecules altered the abundance of several enzymes involved in the biosynthesis of amino acids, purines, and ergosterol. Moreover, differences in the abundance of several enzymes of the TCA cycle were found. Changes observed were different between the active substance and the commercial formulation. SIGNIFICANCE: The presence of fungicide residues in grape juice has direct implications on the development of the aromatic profile of the wine. These alterations could be related to changes in the secondary metabolism of yeasts. However, the molecular mechanisms involved in the response of yeasts to fungicide residues remains quite unexplored. Through this exhaustive proteomic study, alterations in the amino acids biosynthesis pathways due to the presence of the tetraconazole molecules were observed. Amino acids are precursors of some important higher alcohols and ethyl acetates (such as methionol, 2-phenylethanol, isoamyl alcohol or 2-phenylacetate). Besides, the effect of tetraconazole on the ergosterol biosynthesis pathway could be related to a higher production of medium-chain fatty acids and their corresponding ethyl acetates.

Determination of metalaxyl and identification of adjuvants in wettable powder pesticide technical formulas.

Foliar runoff is one of the most important processes affecting off-target movement of fungicides. In this way, Ridomil Gold Plus and Ridomil Gold MZ are two types of wettable powder technical formulations which contain metalaxyl and they are used for such a purpose. A method for quantitative determination of metalaxyl in pesticide formulas has been developed, validated, and subsequently applied to Ridomil Gold Plus and Ridomil Gold MZ. The method employs liquid-liquid extraction followed by liquid chromatography coupled with UV detection (LC-UV), using gas chromatography coupled with mass spectrometry as confirmation technique and to carry out a screening of organic adjuvants of these two selected pesticide formulas. Metalaxyl of 26.5 and 41 g/kg was detected in Ridomil Gold Plus and Ridomil Gold MZ, close to the manufacture specified level of 25 and 40 g/kg, respectively. Activator and utility adjuvants were detected in these two wettable powder technical formulations. Only methyl-ester-based surfactants were found within the group of nonionic surfactants, but the long-term fates of most adjuvants in soils and elsewhere in the environment are largely unknown, partially because of the lack of long-term monitoring data.

Impact of mepanipyrim and tetraconazole in Mencía wines on the biosynthesis of volatile compounds during the winemaking process.

The impact of fungicides mepanipyrim (Mep) and tetraconazole (Tetra) and their corresponding commercial formulations (Mep-Form and Tetra-Form) on the aroma composition of wines was assessed. Fungicide residues can affect the biotransformation of aroma precursors from grapes and/or the yeast metabolism. The results confirmed that both maximum residue levels (MRL and 2xMRL) of Mep promoted benzyl alcohol and 4-vinylguaiacol contents; while MRL and 2xMRL of Mep-Form promoted benzene derivatives (benzyl alcohol, benzaldehyde, and trans-isoeugenol), 2-phenylethanol and γ-nonalactone. The addition of Tetra (2xMRL) and Tetra-Form (MRL and 2xMRL) release higher contents of cis-3-hexen-1-ol and ethyl vanillate and affected yeast metabolism related to phenylacetaldehyde, 2-phenylethanol, methionol, capric acid, ethyl 2-methylbutyrate, ethyl isovalerate, ethyl monosuccionate, diethyl succinate and γ-butyrolactone production. Fungicide residues did not display higher variations in global odour activity values with respect to control wines, although some variations on the "floral", "fruity", "spicy" and "lactic" nuances could be sensed.

Determination of 23 pesticide residues in leafy vegetables using gas chromatography-ion trap mass spectrometry and analyte protectants.

A gas chromatographic method was developed for simultaneously determining residues of 12 insecticides (acrinathrin, bifenthrin, carbofuran, cyfluthrin, lambda-cyhalothrin, cypermethrin, chlorfenvinphos, deltamethrin, esfenvalerate, fenamiphos, methiocarb and tau-fluvalinate) and 11 fungicides (cyprodinil, fludioxonil, iprodione, metalaxyl, penconazole, pyrimethanil, procymidone tebuconazole, triadimefon, triadimenol and vinclozolin) in leafy vegetables. Samples were extracted with acetonitrile and cleaned-up with graphitized carbon black/primary secondary amine (GCB/PSA) solid-phase extraction (SPE) cartridges using acetonitrile:toluene (3:1, v/v) as eluent. The eluate was finally evaporated and redissolved with 0.5 mL of acetone containing the internal standards (pentachlorobenzene and fenpropathrin) and three analyte protectants (3-ethoxy-1,2-propanediol, d-sorbitol and l-gulonic acid gamma-lactone). The addition of analyte protectants allows to avoid the matrix-induced response enhancement effect on quantitation process with absolute recoveries ca. 100%. Precision (expressed as relative standard deviation) was lower than 10% for all pesticides and finally, limits of detection were also 10-20 times lower than maxima residue levels (MRLs) established by European Regulation. The proposed method was applied to determine pesticide residues in commercial leafy vegetables (lettuce, Swiss chard and spinach) purchased from markets in Orense (NW Spain). Pesticide residues were detected in 84% of the total samples (63 from 75 samples) and pesticide concentrations were higher than MRL in 18 samples.

Modelling the isothermal degradation kinetics of metrafenone and mepanipyrim in a grape juice analog.

Five photodegradation products of metrafenone (MTF) and six of mepanipyrim (MEP) were identified in synthetic grape juice at 25 °C and the structures of the main reaction products established. The degradation of MTF and MEP was modelled by using three different strategies involving monitoring (a) the disappearance of the parent compound, (b) the conversion of the parent compound into its main structurally related reaction products and (c) the degradation of the parent compound to all intermediates and degradation end-products. The kinetic coefficients of degradation for these fungicides were determined and the corresponding half-lives found to be 20.8 h for MFT and 10.1 h for MEP. The proposed models afford reasonably accurate interpretation of the experimental data. Based on the results, modelling the kinetics of disappearance of the parent compound by itself does not ensure the best fit of the degradation behaviour of the fungicides.

Simultaneous determination of the herbicides diquat and paraquat in water.

A method based on solid-phase extraction (on silica cartridges) and high-performance liquid chromatography (HPLC) followed by diode array UV detection is presented as an analytical tool for screening diquat (DQ) and paraquat (PQ) in drinking waters. The method is useful for quality control laboratories of water companies and beverage industries. Absolute recoveries of DQ and PQ from drinking water (25 mL in all cases), spiked at levels between 0.1, 1.0, and 5.0 microg/L, range from 91% to 103%. Relative standard deviation percentages are between 3% and 11%. Quantitation and detection limits are 70 and 40 ng/L for DQ and 90 and 60 ng/L for PQ, respectively; therefore, these herbicides can be detected and quantitated at levels below the limits established by the European Union.

Kinetic modelling of mancozeb hydrolysis and photolysis to ethylenethiourea and other by-products in water.

The aim of this study was to propose kinetic models suitable for reproducing and predicting mancozeb (Mz) conversion to by-products as a function of the operational conditions. The main factors (pH, temperature and light) potentially affecting the mancozeb degradation in aqueous models were studied by a multifactorial screening design. In addition, the response surface methodology (RSM) was applied to evaluate the interactive effects of these factors on ethylenethiourea (ETU) formation. The response surface revealed that the best degradation conditions to minimize mancozeb conversion to ETU were low pH (2), low temperature (25 °C) and darkness. Under these conditions, the percentage of mancozeb remained in the solution at 72 h was approximately 10% of the initial concentration and the percentage of ETU conversion was 5.4%. However, according to the model, in surface waters under typical environmental conditions (pH 8, 25 °C and light) the percentage of mancozeb conversion to ETU would be about 17.5%. The proposed model provides a satisfactory interpretation of the experimental data obtained during the hydrolysis of mancozeb.

Variation in concentrations of the fungicides tebuconazole and dichlofluanid following successive applications to greenhouse-grown lettuces.

Residual levels and degradation rates of tebuconazole and dichlofluanid in lettuce plants grown in a greenhouse under agricultural conditions typical of northwestern Spain were studied. Lettuce plants were sprayed four times with a homogeneous 0.2% aqueous solution of Folicur Combi (wettable powder containing 40% dichlofluanid and 10% tebuconazole) at a rate of 2500 g/ha. Samples were collected 1, 5, and 9 days after the first two applications and at times ranging from 1 to 27 days after the last two applications. All samples were stored in a refrigerator at 4 degrees C. Fungicide levels were determined by solid-liquid extraction (SLE) followed by gas chromatography and mass spectrometry detection (GC-MSD). Recovery was good for tebuconazole (98%) but low for dichlofluanid (29%); precision was good (<10% for both analytes), and quantification limits were low (<1.5 mg/kg). Seven days after the last application, dichlofluanid levels were below the maximum allowed limit established in Spain (10 mg/kg), but tebuconazole levels were above the corresponding limit (5 mg/kg). Tebuconazole concentration dynamics was accurately fitted by zeroth- or combined first- and zeroth-order models (depending on variety), but modeling of the behavior of dichlofluanid was less satisfactory, probably due to its instability.

Parameters affecting extraction of selected fungicides from vineyard soils.

This paper describes a sensitive method for the simultaneous quantification of eight commonly used grapevine fungicides in vineyard soils: cyprodinil, fludioxonil, metalaxyl, penconazole, pyrimethanil, procymidone, tebuconazole, and vinclozolin. The fungicides are extracted from the soil sample by sonication with water followed by shaking with ethyl acetate and are quantified by gas chromatography with mass spectrometry. Average extraction efficiencies in a sample of seven spiked, previously fungicide-free soils were > or =79% for all of the analytes, method precisions were > or =17%, and quantification limits were < or =50 microg/kg. However, because recoveries varied considerably from soil to soil, there is a need to control for soil matrix differences (mainly soil pH and exchangeable calcium content); as a consequence, soil fungicide contents must be quantified by the standard additions method. When the method was applied in this way to soil samples from vineyards belonging to the specified wine-growing region of Rias Baixas (Galicia, northwestern Spain) taken at the beginning of October (1 month after the crop's final treatment), levels of fludioxonil as high as 991 microg/kg were found, but at the start of the season (9 months after the previous crop's final treatment) only fludioxonil was detected at levels higher than its limit of quantification (45 and 52 microg/kg).

Procedure for the measurement of soil inputs of plant-protection agents washed off through vineyard canopy by rainfall.

Soil inputs produced by rainfall waters washed off through a Ribeiro vineyard (Galicia, northwestern Spain) confirmed that levels recovered are <5% of the added fungicides. Laboratory studies showed that some fungicides were degraded in the ODS cartridge used for the collection of fungicides washed off by rainfall. Procymidone wash-off data obtained in the vineyard can be explained by a first-order rate mass transfer model. A procedure for the collection of wash-off waters based on octadecylsilane solid phase extraction, followed by an analytical method of reverse-phase liquid chromatography with diode array detection is presented for the evaluation of fungicide inputs into soils after being washed off vineyards by rainfalls. Quality parameters of the analytical method yielded good precision (RSD < 10%) and low detection limits (ranging between 1 and 21 microg/L).

Distribution of polychlorinated biphenyls in both products and by-products of a mussel shell incinerator facility.

PURPOSE: Solid waste incineration has recently attracted much attention because the combustion process involved produces highly toxic organohalogen contaminants such as dioxin-like polychlorinated biphenyls (DL-PCBs) present in fly ash. This has raised the need for simple, rapid, accurate methods for monitoring PCBs in ash samples. METHODS: A method for the simultaneous quantitative determination of indicator, non-ortho and mono-ortho PCBs based on ultrasound-assisted extraction with 50:50 (v/v) n-hexane/acetone was developed, validated, and subsequently applied to real samples from a mussel shell incinerator facility in Galicia. The overall method quantification limits range from 0.35 to 1.5 ng/g in fly ash waste, from 0.30 to 1.0 ng/g in bottom ashes, and from 1.0 to 2.0 ng/g in sludge samples. Mean recoveries between 70% and 105% are achieved. RESULTS: DL-PCBs were identified in ash and in sludge samples collected from the wastewater treatment plant of the waste incineration facility. The enrichment factors for fly ash ranged from 3.3 to 3.7. Sewage sludge was also found to contain some polychlorinated biphenyls such as PCB 77 (29 ± 5.0 ng/g; n=4) and PCB 169 (6.9 ± 0.89 ng/g; n=4), as well as three of the seven PCB-like indicators, namely: PCB 138 (14 ± 4.4 ng/g), PCB 153 (6.1 ± 1.4 ng/g), and PCB 180 (7.7 ± 3.0 ng/g). Toxicity equivalent concentrations were 0.0054 ng/g for bottom ash, 0.0264 ng/g for fly ash, and 3.6 ng/g for sewage sludge; these values are well below the limit for DL-PCBs in wastes recently set by the European Union. CONCLUSIONS: All samples studied contained PCBs at levels below the maximum tolerated limit established by European legislation. Based on their PCB content, the studied sewage sludge can be used as a soil amendment with no health risk. Also, fly ash and sewage sludge can be deemed stable PCB reservoirs releasing PCBs at concentrations below the regulatory cutoff to runoff water.