Electron beam treated injectable agarose/alginate beads prepared by electrospraying.

Granular hydrogels have evolved into an innovative technology for biomedicine. Unlike conventional hydrogels, granular hydrogels display dynamic properties like injectability and porosity, making them feasible for applications in 3D bioprinting and tissue engineering. High-energy electron irradiation combines sterilization and tuning of hydrogel properties without adding potentially cytotoxic chemicals. In this study, granular agarose/alginate hydrogels are prepared by electrospraying. Utilizing 10 MeV electron irradiation, the granular hydrogels are treated in a dose range of 0 kGy-30 kGy relevant for sterilization. Herein, a size reduction of the microparticles is observed. Mechanical properties of individual agarose/alginate beads are examined using AFM measurements revealing a gel softening attributed to radiation induced chain scission. Shear-thinning and self-healing characteristics of the entire granular hydrogel are studied employing rheology. Although viscoelasticity changes under irradiation, shear-thinning and self-healing prevails. These dynamic properties enable injection, which is demonstrated for 27 G needles. This study presents a mechanical characterization of high-energy electron irradiated granular agarose/alginate hydrogels that extends the diversity of available injectable hydrogels and provides a basis for biomedical applications of this scaffold.

Impact of high-energy electron irradiation on mechanical, structural and chemical properties of agarose hydrogels.

Due to their excellent biocompatibility and biodegradability, natural hydrogels are highly demanded biomaterials for biomedical applications such as wound dressing, tissue engineering, drug delivery or three dimensional cell culture. Highly energetic electron irradiation up to 10 MeV is a powerful and fast tool to sterilize and tailor the material's properties. In this study, electron radiation treatment of agarose hydrogels was investigated to evaluate radiation effects on physical, structural and chemical properties. The viscoelastic behavior, surface hydrophilicity and swelling behavior in a range of typical sterilization doses of 0 kGy to 30 kGy was analyzed. The mechanical properties were determined by rheology measurements and decreased by more than 20% compared to the initial moduli. The number average molecular weight between crosslinks was estimated based on rubber elasticity theory to judge on the radiation degradation. In this dose range, the number average molecular weight between crosslinks increased by more than 6%. Chemical structure was investigated by FTIR spectroscopy to evaluate the radiation resistance of agarose hydrogels. With increasing electron dose, an increasing amount of carbonyl containing species was observed. In addition, irradiation was accompanied by formation of gas cavities in the hydrogels. The gas products were specified for CO2, CO and H2O. Based on the radiolytic products, a radiolysis mechanism was proposed. Electron beam treatment under high pressure conditions was found to reduce gas cavity formation in the hydrogels.

Electron Beam-Treated Enzymatically Mineralized Gelatin Hydrogels for Bone Tissue Engineering.

Biological hydrogels are highly promising materials for bone tissue engineering (BTE) due to their high biocompatibility and biomimetic characteristics. However, for advanced and customized BTE, precise tools for material stabilization and tuning material properties are desired while optimal mineralisation must be ensured. Therefore, reagent-free crosslinking techniques such as high energy electron beam treatment promise effective material modifications without formation of cytotoxic by-products. In the case of the hydrogel gelatin, electron beam crosslinking further induces thermal stability enabling biomedical application at physiological temperatures. In the case of enzymatic mineralisation, induced by Alkaline Phosphatase (ALP) and mediated by Calcium Glycerophosphate (CaGP), it is necessary to investigate if electron beam treatment before mineralisation has an influence on the enzymatic activity and thus affects the mineralisation process. The presented study investigates electron beam-treated gelatin hydrogels with previously incorporated ALP and successive mineralisation via incubation in a medium containing CaGP. It could be shown that electron beam treatment optimally maintains enzymatic activity of ALP which allows mineralisation. Furthermore, the precise tuning of material properties such as increasing compressive modulus is possible. This study characterizes the mineralised hydrogels in terms of mineral formation and demonstrates the formation of CaP in dependence of ALP concentration and electron dose. Furthermore, investigations of uniaxial compression stability indicate increased compression moduli for mineralised electron beam-treated gelatin hydrogels. In summary, electron beam-treated mineralized gelatin hydrogels reveal good cytocompatibility for MG-63 osteoblast like cells indicating a high potential for BTE applications.

Contact Guidance by Microstructured Gelatin Hydrogels for Prospective Tissue Engineering Applications.

Design of functionalized biomimetic scaffolds is one of the key approaches for regenerative medicine and other biomedical applications. Development of engineered tissue should optimize organization and function of cells and tissue in vitro as well as in vivo. Surface topography is one factor controlling cellular behavior and tissue development. By topographical patterning of biocompatible materials, highly functionalized scaffolds can be developed. Gelatin is hereby a promising candidate due to its biocompatibility and biodegradability. It is low in cost and easy to handle, enabling a variety of applications in science and medicine. However, for biomedical applications at physiological conditions, gelatin has to be additionally stabilized since its gel-sol-transition temperature lies beneath the human body temperature. This is realized by a reagent-free cross-linking technique utilizing electron beam treatment. By topographical patterning, gelatin can be functionalized toward scaffolds for cell cultivation and tissue development. Thereby, customized patterns are transferred onto gelatin hydrogels via molds. Thermal stabilization of gelatin is then achieved by electron-induced cross-linking. In this study, we investigate the influence of gelatin concentration and irradiation dose on pattern transfer, long-term stability of topographically patterned gelatin hydrogels, and their impact on the cellular behavior of human umbilical vein endothelial cells as well as normal human dermal fibroblasts. We will show that contact guidance occurs for both cell types due to a concrete stripe pattern. In addition, the presented studies show a high degree of cytocompatibility, indicating a high potential of topographically patterned gelatin hydrogels as tissue development scaffold for prospective biomedical applications.

Programing stimuli-responsiveness of gelatin with electron beams: basic effects and development of a hydration-controlled biocompatible demonstrator.

Biomimetic materials with programmable stimuli responsiveness constitute a highly attractive material class for building bioactuators, sensors and active control elements in future biomedical applications. With this background, we demonstrate how energetic electron beams can be utilized to construct tailored stimuli responsive actuators for biomedical applications. Composed of collagen-derived gelatin, they reveal a mechanical response to hydration and changes in pH-value and ion concentration, while maintaining their excellent biocompatibility and biodegradability. While this is explicitly demonstrated by systematic characterizing an electron-beam synthesized gelatin-based actuator of cantilever geometry, the underlying materials processes are also discussed, based on the fundamental physical and chemical principles. When applied within classical electron beam lithography systems, these findings pave the way for a novel class of highly versatile integrated bioactuators from micro- to macroscales.

The phenotype of cancer cell invasion controlled by fibril diameter and pore size of 3D collagen networks.

The behavior of cancer cells is strongly influenced by the properties of extracellular microenvironments, including topology, mechanics and composition. As topological and mechanical properties of the extracellular matrix are hard to access and control for in-depth studies of underlying mechanisms in vivo, defined biomimetic in vitro models are needed. Herein we show, how pore size and fibril diameter of collagen I networks distinctively regulate cancer cell morphology and invasion. Three-dimensional collagen I matrices with a tight control of pore size, fibril diameter and stiffness were reconstituted by adjustment of concentration and pH value during matrix reconstitution. At first, a detailed analysis of topology and mechanics of matrices using confocal laser scanning microscopy, image analysis tools and force spectroscopy indicate pore size and not fibril diameter as the major determinant of matrix elasticity. Secondly, by using two different breast cancer cell lines (MDA-MB-231 and MCF-7), we demonstrate collagen fibril diameter--and not pore size--to primarily regulate cell morphology, cluster formation and invasion. Invasiveness increased and clustering decreased with increasing fibril diameter for both, the highly invasive MDA-MB-231 cells with mesenchymal migratory phenotype and the MCF-7 cells with amoeboid migratory phenotype. As this behavior was independent of overall pore size, matrix elasticity is shown to be not the major determinant of the cell characteristics. Our work emphasizes the complex relationship between structural-mechanical properties of the extracellular matrix and invasive behavior of cancer cells. It suggests a correlation of migratory and invasive phenotype of cancer cells in dependence on topological and mechanical features of the length scale of single fibrils and not on coarse-grained network properties.