Use of Non-Destructive Ultrasonic Techniques as Characterization Tools for Different Varieties of Wine.

In this work, we have verified how non-destructive ultrasonic evaluation allows for acoustically characterizing different varieties of wine. For this, a 3.5 MHz transducer has been used by means of an immersion technique in pulse-echo mode. The tests were performed at various temperatures in the range 14-18 °C. The evaluation has been carried out studying, on the one hand, conventional analysis parameters (velocity and attenuation) and, on the other, less conventional parameters (frequency components). The experimental study comprised two stages. In the first, the feasibility of the study was checked by inspecting twelve samples belonging to six varieties of red and white wine. The results showed clearly higher ultrasonic propagation velocity values in the red wine samples. In the second, nine samples of different monovarietal wine varieties (Grenache, Tempranillo and Cabernet Sauvignon) were analyzed. The results show how ultrasonic velocity makes it possible to unequivocally classify the grape variety used in winemaking with the Cabernet Sauvignon variety having the highest values and the Grenache the lowest. In addition, the wines of the Tempranillo variety are those that present higher values of the attenuation coefficient, and those from the Grenache variety transmit higher frequency waves.

Acoustic Characterization Study of Beef Loins Using Ultrasonic Transducers.

The objective of this study was to non-destructively characterize samples of fresh beef loin by low-intensity ultrasound inspection at various frequencies and to correlate the acoustic parameters of these inspections with quality parameters. In this regard, ultrasonic parameters such as ultrasound pulse velocity (UPV) and variables related to attenuation and frequency components obtained from fast Fourier transform (FFT) were considered. For this, pulsed ultrasonic signal transducers with a frequency of 0.5 and 1.0 MHz were used. Acoustic parameters and those obtained through traditional instrumental analyses (physicochemical and texture) underwent a Pearson correlation analysis. The acoustic determinations revealed numerous significant correlations with the rest of the studied parameters. The results demonstrate that ultrasonic inspection has the ability to characterize samples with a non-destructive nature, and likewise, this methodology can be postulated as a promising predictive tool for determining quality parameters in beef loin samples.

Ultrasound Assessment of Honey Using Fast Fourier Transform.

Ultrasound inspection permits the characteristics of some foodstuffs to be determined easily and cheaply. This experimental study included the determination of various ultrasound parameters provided by the fast Fourier transform (FFT) which had not previously been considered in testing the physical properties of different varieties of honey. These parameters are practically independent of the criteria adopted for their calculation, unlike other ultrasound variables such as pulse velocity or attenuation whose determination can vary depending on those criteria. The study was carried out on four varieties of honey (Eucalyptus, Heather, Thyme, and Thousand Flowers) using 500-kHz transducers. A simultaneously performed honey texture analysis (Texture Profile Analysis-TPA) showed significant linear correlations between the ultrasound variables provided by FFT and the texture parameters. The FFT parameters distinguished between each of the four honey varieties studied.

Dimensionless coefficients for assessing human exposure to radio-frequency electromagnetic fields indoors and outdoors in urban areas.

The main objective of this work was to evaluate human exposure to electromagnetic fields in a city of about one hundred thousand inhabitants, both inside and outside dwellings, using exposure quotients. To this end, a personal exposure meter was used, collecting data in different frequency bands, including radio and television broadcasting, mobile telephony, cordless telephones, and wireless communication networks. The indoor measurements were made with the exposure meter in a static position. Those outdoor were made by walking around the building with the exposure meter held by the operator. The median electric field was 0.200 V/m outdoors and 0.102 V/m indoors. The median of the ICNIRP exposure quotients for multiple-frequency sources was 25 10-6 outside and 16 10-6 inside. The proximity of the operator's body caused the readings of the electric field in the FM band to be overestimated by a factor of 1.35, and in the mobile telephony bands by factors from 0.76 to 1.02. The standard deviation of the measurements repeated inside a dwelling over five days was of the order of the exposure meter's standard uncertainty of calibration, but the spatial dispersion at the scale of a dwelling and of the city was much greater. The two main contributors to the exposure were FM radio followed by the "downlink" mobile telephony bands. Inside the dwellings, the DECT and WIFI bands contributed less. Exposure quotients are dimensionless parameters that characterize exposure, and reflect the relative weight of each service to that exposure.

Application of ultrasound for quality control of Torta del Casar cheese ripening.

This work aimed to establish the ultrasound parameters that can be useful to classify the defects in the soft cheese Torta del Casar during ripening. During ripening by ultrasound, 1 standard and 3 defective cheese batches (anomalous microbial population, inadequate pressing curd, and excessive pressing curd) were evaluated. Ultrasound parameters related to velocity, attenuation, and frequency were calculated and correlated with the physicochemical and rheological properties of the cheeses. Ultrasound data were considered variables in linear discriminant analysis to attempt cheese classification at different periods of the ripening process. Defective soft cheeses could be discriminated from standard ones with good accuracy, mainly at the final stages of ripening. The differentiation of cheese samples from 2 of the defective cheese batches (anomalous microbial population and inadequate pressing curd) from the standard was mainly attributed to different values of the attenuation-related parameters, whereas for samples from the other defective batch (excessive pressing curd), some parameters related to velocity and frequency were responsible for such discrimination.

Optimization and comparison of three spatial interpolation methods for electromagnetic levels in the AM band within an urban area.

A comparative study was made of three methods of interpolation - inverse distance weighting (IDW), spline and ordinary kriging - after optimization of their characteristic parameters. These interpolation methods were used to represent the electric field levels for three emission frequencies (774kHz, 900kHz, and 1107kHz) and for the electrical stimulation quotient, QE, characteristic of complex electromagnetic environments. Measurements were made with a spectrum analyser in a village in the vicinity of medium-wave radio broadcasting antennas. The accuracy of the models was quantified by comparing their predictions with levels measured at the control points not used to generate the models. The results showed that optimizing the characteristic parameters of each interpolation method allows any of them to be used. However, the best results in terms of the regression coefficient between each model's predictions and the actual control point field measurements were for the IDW method.

The spatial statistics formalism applied to mapping electromagnetic radiation in urban areas.

Determining the electromagnetic radiation levels in urban areas is a complicated task. Various approaches have been taken, including numerical simulations using different models of propagation, sampling campaigns to measure field values with which to validate theoretical models, and the formalism of spatial statistics. In the work, we present here that this latter technique was used to construct maps of electric field and its associated uncertainty from experimental data. For this purpose, a field meter and a broadband probe sensitive in the 100-kHz-3-GHz frequency range were used to take 1,020 measurements around buildings and along the perimeter of the area. The distance between sampling points was 5 m. The results were stored in a geographic information system to facilitate data handling and analysis, in particular, the application of the formalism of spatial statistical to the analysis of the distribution of the field levels over the study area. The spatial structure was analyzed using the variographic technique, with the field levels at non-sampled points being interpolated by kriging. The results indicated that, in the urban area analyzed in the present work, the linear density of sampling points could be reduced to a distance which coincides with the length of the blocks of buildings without the statistical parameters varying significantly and with the field level maps being reproduced qualitatively and quantitatively.

Spectral analysis to assess exposure to extremely low frequency magnetic fields in cars.

A type of contamination that has been little studied in cars comes from the extremely low frequency (ELF) magnetic fields generated by the vehicle's electrical devices and the magnetized metal in the tyres. The magnetic fields in cars are frequently analysed with broadband meters sensitive to a frequency range above 30Hz. This has the disadvantage that they neither detect the magnetic field of the spinning tyres nor give any information on the spectral components, which makes it impossible to adequately assess exposure. The objective of the present study was to perform spectral analyses of ELF magnetic fields in cars, to identify their frequencies, and to assess exposure based on the ICNIRP regulatory guidelines. To do this, a meter and a spectrum analyser sensitive to magnetic fields in the 5Hz-2kHz frequency range were used. Spectra were acquired for different seats, heights, and speeds, and spatially averaged exposure coefficients were calculated. The results indicated that the main emissions were detected in the 5-100Hz range, where the wheel rotation frequencies and their harmonics are found. The intensity of the rest of the emissions were negligible in comparison. The exposure quotient increases with speed, and is approximately twice as great at foot level as at head level. The magnetic field levels are lower than the reference levels (the maximum represents 3% of the ICNIRP standard), but higher than those found in residential environments and than the cut-off threshold used by the IARC to classify ELF magnetic fields in Group 2B.

Contributions to ultrasound monitoring of the process of milk curdling.

Ultrasound evaluation permits the state of milk being curdled to be determined quickly and cheaply, thus satisfying the demands faced by today's dairy product producers. This paper describes the non-invasive ultrasonic method of in situ monitoring the changing physical properties of milk during the renneting process. The basic objectives of the study were, on the one hand, to confirm the usefulness of conventional non-destructive ultrasonic testing (time-of-flight and attenuation of the ultrasound waves) in monitoring the process in the case of ewe's milk, and, on the other, to include other ultrasound parameters which have not previously been considered in studies on this topic, in particular, parameters provided by the Fast Fourier Transform technique. The experimental study was carried out in a dairy industry environment on four 52-l samples of raw milk in which were immersed 500kHz ultrasound transducers. Other physicochemical parameters of the raw milk (pH, dry matter, protein, Gerber fat test, and lactose) were measured, as also were the pH and temperature of the curdled samples simultaneously with the ultrasound tests. Another contribution of this study is the linear correlation analysis of the aforementioned ultrasound parameters and the physicochemical properties of the curdled milk.

Exposure estimates based on broadband ELF magnetic field measurements versus the ICNIRP multiple frequency rule.

The evaluation of exposure to extremely low-frequency (ELF) magnetic fields using broadband measurement techniques gives satisfactory results when the field has essentially a single frequency. Nevertheless, magnetic fields are in most cases distorted by harmonic components. This work analyses the harmonic components of the ELF magnetic field in an outdoor urban context and compares the evaluation of the exposure based on broadband measurements with that based on spectral analysis. The multiple frequency rule of the International Commission on Non-ionizing Radiation Protection (ICNIRP) regulatory guidelines was applied. With the 1998 ICNIRP guideline, harmonics dominated the exposure with a 55% contribution. With the 2010 ICNIRP guideline, however, the primary frequency dominated the exposure with a 78% contribution. Values of the exposure based on spectral analysis were significantly higher than those based on broadband measurements. Hence, it is clearly necessary to determine the harmonic components of the ELF magnetic field to assess exposure in urban contexts.

Medium wave exposure characterisation using exposure quotients.

One of the aspects considered in the International Commission on Non-Ionizing Radiation Protection guidelines is that, in situations of simultaneous exposure to fields of different frequencies, exposure quotients for thermal and electrical stimulation effects should be examined. The aim of the present work was to analyse the electromagnetic radiation levels and exposure quotients for exposure to multiple-frequency sources in the vicinity of medium wave radio broadcasting antennas. The measurements were made with a spectrum analyser and a monopole antenna. Kriging interpolation was used to prepare contour maps and to estimate the levels in the towns and villages of the zone. The results showed that the exposure quotient criterion based on electrical stimulation effects to be more stringent than those based on thermal effects or power density levels. Improvement of dosimetry evaluations requires the spectral components of the radiation to be quantified, followed by application of the criteria for exposure to multiple-frequency sources.

Electrical stimulation vs thermal effects in a complex electromagnetic environment.

Studies linking exposure to low levels of radiofrequencies with adverse health effects, notwithstanding their present apparent inconsistency, have contributed to a steady improvement in the quality of evaluating that exposure. In complex electromagnetic environments, with a multitude of emissions of different frequencies acting simultaneously, knowledge of the spectral content is fundamental to evaluating human exposure to non-ionizing radiation. In the present work, we quantify the most significant spectral components in the frequency band 0.5-2200 MHz in an urban area. The measurements were made with a spectrum analyzer and monopole, biconical, and log-periodic antennas. Power density levels were calculated separately for the medium wave, short wave, and frequency modulation radio broadcasting bands, and for the television and GSM, DCS, and UMTS mobile telephony bands. The measured levels were compared with the ICNIRP reference levels for exposure to multiple frequency sources for thermal effects and electrical stimulation. The results showed the criterion limiting exposure on the basis of preventing electrical stimulation of peripheral nerves and muscles to be stricter (exposure quotient 24.7 10(-4)) than that based on thermal considerations (exposure quotient 0.16 10(-4)). The bands that contribute most to the latter are short wave, with 46.2%, and mobile telephony with 32.6% of the total exposure. In a complex electromagnetic environment, knowledge of the radiofrequency spectrum is essential in order to quantify the contribution of each type of emission to the public's exposure. It is also necessary to evaluate the electrical effects as well as the thermal effects because the criterion to limit exposure on the basis of the effect of the electrical stimulation of tissues is stricter than that based on thermal effects.

Exposure to extremely low frequency magnetic fields in an urban area.

Magnetic field levels were studied in an urban area--the city of Cáceres (Spain). The study included systematic spot measurements throughout the city, an analysis of the temporal variation of the magnetic field, and the incorporation of the data into a geographic information system. The levels detected were at most 7.3% of the ICNIRP reference levels, and the highest fields were found in the oldest neighborhoods. Considered overall, the ELF magnetic flux density levels determined in the present study were between those found in residential and in working environments. Knowledge of the levels of such fields in urban areas is therefore fundamental in evaluating the population's overall exposure, especially for people who work outdoors.

Exposure assessment of ELF magnetic fields in urban environments in Extremadura (Spain).

We present the results of a study of the extremely low frequency (ELF) magnetic fields in urban environments of the Extremadura region (Spain). The study included a spectral analysis, an analysis of the temporal variation, and spot measurements in the streets of four cities. The spectral analysis showed that the main source of magnetic field exposure was that corresponding to the principal power frequency (50 Hz) and its third harmonic. The magnetic flux density measured at one point over 24 h presented rapid fluctuations in short time periods. Smoothing the time series eliminated these fluctuations, showing a temporal evolution associated with the differing levels of power consumption over the course of the day. The values of the spot measurements taken in the streets were all below the ICNIRP reference level, although 30% surpassed 0.2 microT, the value that some epidemiological studies take as the threshold above which there exist risks of effects that could be harmful to health. The values found for the magnetic flux density in these urban settings were generally greater than values reported in the literature for residential areas, and similar to, although in some cases less than those in workplace environments.