Oral nitrate supplementation improves cardiovascular risk markers in COPD: ON-BC, a randomised controlled trial.

BACKGROUND: Short-term studies suggest that dietary nitrate (NO3 -) supplementation may improve the cardiovascular risk profile, lowering blood pressure (BP) and enhancing endothelial function. It is not clear if these beneficial effects are sustained and whether they apply in people with COPD, who have a worse cardiovascular profile than those without COPD. Nitrate-rich beetroot juice (NR-BRJ) is a convenient dietary source of nitrate. METHODS: The ON-BC trial was a randomised, double-blind, placebo-controlled parallel group study in stable COPD patients with home systolic BP (SBP) measurement ≥130 mmHg. Participants were randomly allocated (1:1) using computer-generated, block randomisation to either 70 mL NR-BRJ (400 mg NO3 -) (n=40) or an otherwise identical nitrate-depleted placebo juice (0 mg NO3 -) (n=41), once daily for 12 weeks. The primary end-point was between-group change in home SBP measurement. Secondary outcomes included change in 6-min walk distance (6MWD) and measures of endothelial function (reactive hyperaemia index (RHI) and augmentation index normalised to a heart rate of 75 beats·min-1 (AIx75)) using an EndoPAT device. Plasma nitrate and platelet function were also measured. RESULTS: Compared with placebo, active treatment lowered SBP (Hodges-Lehmann treatment effect -4.5 (95% CI -5.9- -3.0) mmHg), and improved 6MWD (30.0 (95% CI 15.7-44.2) m; p<0.001), RHI (0.34 (95% CI 0.03-0.63); p=0.03) and AIx75 (-7.61% (95% CI -14.3- -0.95%); p=0.026). CONCLUSIONS: In people with COPD, prolonged dietary nitrate supplementation in the form of beetroot juice produces a sustained reduction in BP, associated with an improvement in endothelial function and exercise capacity.

Studies on the effect of curcumin and quercetin in the liver of male albino rats exposed to gamma irradiation.

Ionizing radiation produces deleterious effects on living organisms. The present investigation has been carried out to study the prophylactic as well as the therapeutic effects of treated rats with quercetin (Quer) and curcumin (Cur), which are two medicinal herbs known for their antioxidant activities against damages induced by whole-body fractionated gamma irradiation. Exposure of rats to whole-body gamma irradiation induced a significant decrease in erythrocyte (RBC), leukocyte (WBCs), platelet count (Plt), hemoglobin concentration (Hb), hematocrit (Hct %), mean erythrocyte hemoglobin (MCH), mean corpuscular hemoglobin concentration (MCHC), and mean erythrocyte volume (MCV); a high increase in plasma thiobarbituric acid reactive substances (TBARS); a nonsignificant statistical decrease in the mean value of serum glutathione (GSH); a significant increase in plasma alanine transferase (ALT), aspartate transferase (AST), alkaline phosphates (ALP), serum total protein, serum total cholesterol levels, total triglycerides levels, high-density lipoprotein (HDL), and low-density lipoprotein (LDL) levels; and with marked histological changes and structural changes measured by Fourier transform infrared (FTIR). Applying both quercetin and curcumin pre- and postexposure to gamma radiation revealed a remarkable improvement in all the studied parameters. The cellular damage by gamma radiation is greatly mitigated by the coadministration of curcumin and quercetin before radiation exposure.

Impact of Auxiliary Features on Retention of Short Dental Crowns: An In-Vitro Analysis of Box and Groove Preparations.

BACKGROUND Several auxiliary features have been proposed to achieve sustainable retention for short-prepared dental crowns; however, achieving retention is challenging. This study aimed to assess the impact of increased total occlusal convergence and auxiliary preparation factors like box and groove on the retention form of short tooth preparations. MATERIAL AND METHODS Eighty resin machine-milled dies with a height of 3 mm and a deep chamfer margin of 1 mm were prepared to mimic the short-prepared molar. Initially, 2 teeth were prepared following the guidelines, and the total occlusal convergence was kept at 10° and 20°, respectively. Auxiliary features such as the proximal box and buccal groove were prepared on separate 20° dies. Eighty dies were prepared with 10 samples each for 10°, 20°, 20° with proximal box and 20° with buccal groove for zirconia (n=40) and metal crowns (n=40). Cementation was done with glass ionomer luting cement, and a pull-off test was conducted. Data were analyzed using one-way analysis of variance and post hoc fisher least significant difference test (P<0.05). RESULTS The highest mean was observed in the proximal box group with the metal crown (14.59), and the lowest in the group with 20° zirconia crowns (9.12). Within groups, the highest retentive values were found for the 20° taper with proximal box preparation; the lowest was for the 20° taper group. CONCLUSIONS Within the study limitations, it could be concluded that incorporating a proximal box or buccal groove in short tooth preparations with an increased total occlusal convergence improved retentive values.

Comparative Accuracy of Intraoral and Extraoral Digital Workflows for Short Span Implant Supported Fixed Partial Denture Fabrication: An In Vitro Study.

BACKGROUND The advent of digital impressions using computer-aided design and manufacturing technology (CAD/CAM) has simplified and improved the fabrication of implant prostheses in dentistry. The conventional impression has several drawbacks, including tray selection, material type, impression technique, impression disinfection, and cast model storage. The inaccuracies caused by distortion and contraction of impression material can be minimized with digital impressions. This study aimed to compare digital dental impressions of 10 working casts made using the Pindex laser removable die system to fabricate parallel drill channels vs 10 working casts made using the Di-Lok plastic tray removable die system. MATERIAL AND METHODS An implant master die with 2 dental implant analogs was fabricated. Ten working casts using the Pindex laser removable die system with parallel drill channels and 10 working casts using the Di-Lok plastic tray removable die system were fabricated. The working casts were scanned using an extra-oral laboratory scanner and the implant master model was scanned with an intra-oral scanner. RESULTS The properties of the casts made using the 2 systems were evaluated and analyzed with ANOVA and post hoc Tukey test. The mean horizontal linear distances between A1B1 (P<0.021), A2B2 (P<0.018), C1D1 (P<0.026), C2D2 (P<0.03), B1C1 (P<0.01), and mean vertical distances between B1A2 (P<0.015), C1D2 (P<0.001), B1B2 (P<0.028), and C1C2 (P<0.001) were significantly different between the Pindex system and Di-Lok tray system as compared to intra-oral scans. CONCLUSIONS Complete digital workflow with intra-oral scans were more than the partial digital workflow with extra-oral scans for the Pindex system and Di-Lok tray systems.

The Impact of Repeated Steam Sterilization Cycles on the Efficacy of Chairside Adjustment Kits for Polishing Monolithic Multi-Layered Zirconia Dental Restoration Material.

BACKGROUND Before insertion, chairside adjustment kits are heat sterilized for positioning and polishing dental restorations. This study aimed to evaluate the effects of 2 steam sterilization cycles on the efficacy of polishing highly translucent monolithic zirconia (HTMLZ) dental restoration material. MATERIAL AND METHODS 100 HTMLZ disc-shaped specimens were adjusted (grinding, finishing, polishing) with EVE Diacera kit. Two steam sterilization techniques [standard (Gp S), immediate/flash (Gp (F)] of CAK were further subgrouped based on number of sterilization cycles [cycle 1 (control), cycle 5, 10, 15, and 20 (experimental)] (n=10 each). Each subgroup accordingly was evaluated for average surface roughness (Ra) and root mean square roughness (Rq) using a profilometer. Mean and standard deviation of 5 subgroups were statistically analyzed using one-way ANOVA/post hoc Tukey's test. Scanning electron microscopy complemented Ra, Rq measurements. Statistical differences of P≤0.05 were considered significant. RESULTS HTMLZ specimens in both groups showed increased (Ra/Rq) values after repeated sterilization of EVE Diacera kit, with Gp F showing lesser increase than Gp S (20 cycles). Gp F at 10 cycles and Gp S at 15 cycles showed clinically unacceptable roughness threshold (0.25 µm). Differences between subgroups for Ra and Rq values were significant (P≤0.05) with less differences within groups observed in early cycles (1, 10). Results validate the manufacturer's recommendations of using flash sterilization/10 cycles for EVE Diacera kit. CONCLUSIONS Repeated sterilization reduces efficacy of chairside adjustment kit to produce smooth surfaces on HTMLZ. This study recommends flash sterilization to a maximum of 10 times to get the clinically acceptable results of Ra and Rq.

Consensus recommendations on fasting during Ramadan for patients with kidney disease: review of available evidence and a call for action (RaK Initiative).

Ramadan fasting (RF) involves abstaining from food and drink during daylight hours; it is obligatory for all healthy Muslims from the age of puberty. Although sick individuals are exempt from fasting, many will fast anyway. This article explores the impact of RF on individuals with kidney diseases through a comprehensive review of existing literature and consensus recommendations. This study was conducted by a multidisciplinary panel of experts.The recommendations aim to provide a structured approach to assess and manage fasting during Ramadan for patients with kidney diseases, empowering both healthcare providers and patients to make informed decisions while considering their unique circumstances.

Prolonged interval to surgery following neoadjuvant chemoradiotherapy in locally advanced rectal cancer: A meta-analysis of randomized controlled trials.

BACKGROUND: Long-course neoadjuvant chemoradiotherapy (NCRT), followed by surgery after an interval of 6-8 weeks, represents standard of care for patients with locally advanced rectal cancer (LARC). Increasing this interval may improve rates of complete pathological response (pCR) and tumour downstaging. We performed a meta-analysis comparing standard (SI, within 8 weeks) versus longer (LI, after 8 weeks) interval from NCRT to surgery. METHODS: PubMed, Embase, and Cochrane databases were searched up to 31 August 2022. Randomized controlled trials (RCTs) comparing SI with LI after NCRT for LARC were included. The primary endpoint was pCR rate. Secondary endpoints included rates of R0 resection, circumferential resection margin positivity (+CRM), TME completeness, lymph node yield (LNY), operative duration, tumour downstaging (TD), sphincter preservation, mortality, postoperative complications, surgical site infection (SSI) and anastomotic leak (AL). Random effects models were used to calculate pooled effect size estimates. RESULTS: Four RCTs encompassing 867 patients were included. There were 539 males (62.1%). LI was associated with a higher pCR rate (OR 0.61, 95%CI â€‹= â€‹0.39-0.95, p â€‹= â€‹0.03), and more TD (OR 0.60, 95%CI â€‹= â€‹0.37-0.97, p â€‹= â€‹0.04) compared to SI. However, there was no difference in rates of R0 resection (p â€‹= â€‹0.87), +CRM (p â€‹= â€‹0.66), sphincter preservation (p â€‹= â€‹0.26), incomplete TME (p â€‹= â€‹0.49), LNY (p â€‹= â€‹0.55), SSI (p â€‹= â€‹0.33), AL (p â€‹= â€‹0.20), operative duration (p â€‹= â€‹0.07), mortality (p â€‹= â€‹0.89) or any surgical complication (p â€‹= â€‹0.91). CONCLUSIONS: A LI to surgery after NCRT for LARC increases pCR and TD rates. Local recurrence or survival were not assessed due to unavailable data. We recommend deferring TME until after an interval of 8 weeks following completion of NCRT.

Awareness and practice of airway pressure release ventilation mode in acute respiratory distress syndrome patients among nurses in Saudi Arabia.

BACKGROUND: This study aimed to assess the knowledge and current practice of using the airway pressure release ventilation (APRV) mode with acute respiratory distress syndrome (ARDS) patients and identify barriers to not using this mode of ventilation among nurses who work in critical areas in Saudi Arabia. METHODS: Between December 2022 and April 2023, a cross-sectional online survey was disseminated to nurses working in critical care areas in Saudi Arabia. The characteristics of the respondents were analyzed using descriptive statistics. Percentages and frequencies were used to report categorical variables. RESULTS: Overall, 1,002 nurses responded to the online survey, of whom 592 (59.1%) were female. Only 248 (24.7%) nurses had ever used APRV mode, whereas only 229 (22.8%) received training on APRV mode. Moreover, 602 (60.0%) nurses did not know whether APRV was utilized in their hospital. Additionally, 658 (65.6%) nurses did not know whether APRV mode was managed using a standard protocol. Prone positioning was the highest recommended intervention by 444 (43.8%) when a conventional MV failed to improve oxygenation in patients with ARDS. 323 (32.2%) respondents stated that the P-high should be set equal to the plateau pressure on a conventional ventilator, while 400 (39.9%) said that the P-low should match PEEP from a conventional ventilator. Almost half of the respondents (446, 44.5%) stated that the T-high should be set between 4 and 6 s, while 415 (41.4%) said that the T-low should be set at 0.4 to 0.8 s. Over half of the nurses (540, 53.9%) thought that the maximum allowed tidal volume during the release phase should be 4-6 ml/kg. Moreover, 475 (47.4%) believed that the maximum allowed P-high setting should be 35 cm H2O. One-third of the responders (329, 32.8%) stated that when weaning patients with ARDS while in APRV mode, the P-high should be reduced gradually to reach a target of 10 cm H2O. However, 444 (44.3%) thought that the T-high should be gradually increased to reach a target of 10 s. Half of the responders (556, 55.5%) felt that the criteria to switch the patient to continuous positive airway pressure (CPAP) were for the patient to have an FiO2 ≤ 0.4, P-high ≤ 10 cm H2O, and T-high ≥ 10 s. Lack of training was the most common barrier to not using APRV by 615 (61.4%). CONCLUSION: The majority of nurses who work in critical care units have not received sufficient training in APRV mode. A significant discrepancy was observed regarding the clinical application and management of APRV parameters. Inadequate training was the most frequently reported barrier to the use of APRV in patients with ARDS.

Assessment of dimensional stability of novel VPES impression material at different time intervals with standard disinfectants.

BACKGROUND: Vinyl polyether silicone (VPES) is a novel impression biomaterial made of a combination of vinyl polysiloxane (VPS) and polyether (PE). Thus, it is significant to assess its properties and behaviour under varied disinfectant test conditions. This study aimed to assess the dimensional stability of novel VPES impression material after immersion in standard disinfectants for different time intervals. METHODS: Elastomeric impression material used -medium body regular set (Monophase) [Exa'lence GC America]. A total of 84 Specimens were fabricated using stainless steel die and ring (ADA specification 19). These samples were distributed into a control group (n=12) and a test group (n=72). The test group was divided into 3 groups, based on the type of disinfectant used - Group-A- 2% Glutaraldehyde, Group-B- 0. 5% Sodium hypochlorite and Group-C- 2% Chlorhexidine each test group was further divided into 2 subgroups (n=12/subgroup) based on time intervals for which each sample was immersed in the disinfectants - subgroup-1- 10 mins and Subgroup 2- 30 mins. After the impression material was set, it was removed from the ring and then it was washed in water for 15 seconds. Control group measurements were made immediately on a stereomicroscope and other samples were immersed in the three disinfection solutions for 10 mins and 30 mins to check the dimensional stability by measuring the distance between the lines generated by the stainless steel die on the samples using a stereomicroscope at x40 magnification. RESULTS: The distance measured in the control group was 4397.2078 µm and 4396.1571 µm; for the test group Group-A- 2% Glutaraldehyde was 4396.4075 µm and 4394.5992 µm; Group-B- 0. 5% Sodium hypochlorite was 4394.5453 µm and 4389.4711 µm Group-C- 2% Chlorhexidine was 4395.2953 µm and 4387.1703 µm respectively for 10 mins and 30 mins. Percentage dimensional change was in the range of 0.02 - 0.25 for all the groups for 10 mins and 30 mins. CONCLUSIONS: 2 % Glutaraldehyde is the most suitable disinfectant for VPES elastomeric impression material in terms of dimensional stability and shows minimum dimensional changes as compared to that of 2% Chlorhexidine and 0.5% Sodium hypochlorite.

Prediction of Diabetes and Prediabetes among the Saudi Population Using a Non-Invasive Tool (AUSDRISK).

Background and Objectives: Screening for type 2 diabetes mellitus (DM2) aims to identify asymptomatic individuals who may be at a higher risk, allowing proactive interventions. The objective of this study was to predict the incidence of DM2 and prediabetes in the Saudi population over the next five years. Materials and Methods: The study was conducted in the Aseer region through August 2023 using a cross-sectional survey for data collection. A multistage stratified random sampling technique was adopted, and data were collected through face-to-face interviews using the validated Arabic version of the Australian Type 2 Diabetes Risk Assessment Tool (AUSDRISK). Results: In total, 652 individuals were included in the study. Their mean age was 32.0 ± 12.0 years; 53.8% were male, 89.6% were from urban areas, and 55.8% were single. There were statistically significant differences between males and females in AUSDRISK items, including age, history of high blood glucose, use of medications for high blood pressure, smoking, physical activity, and measurements of waist circumference (p < 0.05). Based on AUSDRISK scores, 46.2% of the included participants were predicted to develop impaired glucose tolerance within the coming five years (65.8% among females vs. 23.6%), and 21.9% were predicted to develop DM2 (35.6% among males vs. 6.0% among females); this difference was statistically significant (p = 0.0001). Conclusions: Urgent public health action is required to prevent the increasing epidemic of DM2 in Saudi Arabia.

Biochemical Significance of miR-155 and miR-375 as Diagnostic Biomarkers and Their Correlation with the NF-κß/TNF-α Axis in Breast Cancer.

Serum microRNAs (miRs) have recently been proposed as potential cancer biomarkers for early detection. Thyroid hormones play a crucial role in human health, and their alterations are linked to a range of diseases, such as breast cancer. The relationship between NF-κß, TNF-α, and non-coding RNAs is an urgent need for clinical trials. This study aimed to investigate serum expression folds of miR-155 and miR-375 and their correlations with NF-κß and TNF-α in breast cancer patients. The current study was conducted on 183 unrelated female participants. Serum levels of free T3 and T4, as well as expression folds of miR-155 and miR-375, were significantly higher in patients with fibroadenoma and breast cancer, despite TSH being significantly lower. Additionally, the signaling of TNF-alpha and NF-κß were found to be significantly upregulated in the serum of patients with breast cancer. Up-regulation of miR-155 and miR-375 expression may be diagnostic biomarkers of breast cancer, pointing to the role of NF-κß and TNF-α expression in miR-155 and miR-375 expression as therapeutic targets of breast cancer in the future.

Oscillatory positive expiratory pressure therapy in COPD (O-COPD): a randomised controlled trial.

BACKGROUND: Oscillatory positive expiratory pressure (OPEP) devices are intended to facilitate sputum clearance and reduce cough, but there is limited evidence for their effectiveness in COPD, or to guide patient selection. We aimed to assess the impact of OPEP therapy on quality of life and objective measures of cough and sleep disturbance in patients with COPD with regular sputum production. METHODS: We enrolled stable patients with COPD, who reported sputum production every day or most days, into an assessor-blind, parallel-group, randomised controlled trial comparing 3 months of using an Acapella device against usual care (including use of the active cycle of breathing technique). The primary outcome was cough-related quality of life measured using the Leicester Cough Questionnaire (LCQ). Secondary outcomes included fatigue (Functional Assessment of Chronic Illness Therapy, FACIT score) and generic quality of life (EuroQol-5 Dimensions, EQ-5D). In a substudy (n=45), objective monitoring of cough and disturbance/movement during sleep were also available. RESULTS: 122 participants (61/61 OPEP/control) were recruited, 40% female, 17% smokers, FEV1 38 (25-56)% predicted, and age 62±10 years. 103 completed the study (55/48 OPEP/control). Use of OPEP was associated with an improvement in LCQ compared with controls; MD (95% CI) 1.03 (0.71 to 2.10); (p=0.03), FACIT score 4.68 (1.34 to 8.02); (p<0.001) and EQ-5D 4.00 (0.49 to 19.75); (p=0.04). There was also an improvement in cough frequency -60 (-43 to -95) coughs/24 hours (p<0.001), but no statistically significant effect on sleep disturbance was identified. CONCLUSIONS: Regular use of an Acapella device improves symptoms and quality of life in people with COPD who produce sputum daily or most days. TRIAL REGISTRATION NUMBER: ISRCTN44651852.

Comparison between different neoadjuvant chemotherapy regimens and local therapy alone for bladder cancer: a systematic review and network meta-analysis of oncologic outcomes.

PURPOSE: The present systematic review and network meta-analysis (NMA) compared the current different neoadjuvant chemotherapy (NAC) regimes for bladder cancer patients to rank them. METHODS: We used the Bayesian approach in NMA of six different therapy regimens cisplatin, cisplatin/doxorubicin, (gemcitabine/cisplatin) GC, cisplatin/methotrexate, methotrexate, cisplatin, and vinblastine (MCV) and (MVAC) compared to locoregional treatment. RESULTS: Fifteen studies comprised 4276 patients who met the eligibility criteria. Six different regimes were not significantly associated with a lower likelihood of overall mortality rate compared to local treatment alone. In progression-free survival (PFS) rates, cisplatin, GC, cisplatin/methotrexate, MCV and MVAC were not significantly associated with a higher likelihood of PFS rate compared to locoregional treatment alone. In local control outcome, MCV, MVAC, GC and cisplatin/methotrexate were not significantly associated with a higher likelihood of local control rate versus locoregional treatment alone. Nevertheless, based on the analyses of the treatment ranking according to SUCRA, it was highly likely that MVAC with high certainty of results appeared as the most effective approach in terms of mortality, PFS and local control rates. GC and cisplatin/doxorubicin with low certainty of results was found to be the best second options. CONCLUSION: No significant differences were observed in mortality, progression-free survival and local control rates before and after adjusting the type of definitive treatment in any of the six study arms. However, MVAC was found to be the most effective regimen with high certainty, while cisplatin alone and cisplatin/methotrexate should not be recommended as a neoadjuvant chemotherapy regime.

The Prevalence of Transfusion-Transmitted Infection Markers among Blood Donors at Saudi Hospital, Makkah.

BACKGROUND: Testing of blood donors for markers of transfusion-transmitted infections (TTIs) such as HBV, HCV, HIV, HTLV, syphilis, and malaria is mandatory in Saudi Arabia. This study determined the prevalence of all tested TTIs among blood donors in the western region of Saudi Arabia. METHODS: This retrospective study included 5,473 blood donors who attended the blood donation center at the Security Force Hospital (SFH) located in the western region of Saudi Arabia from January 1, 2015 to December 31, 2018. The prevalence of TTIs was determined and classified as per year, gender, age, type of donors (first-time vs. returned donors), category of donation (replacement vs. volunteer), and blood group. RESULTS: All donors (100%) were screened for TTIs by serological assays and nucleic acid tests (NATs). "Reactive" samples to serological assays were as follow: 57 (1.07%) HBsAg, 292 (5.34%) HBsAb, 388 (7.1%) HBcAbs, 13 (0.24%) HCV, 5 (0.09%) HIV, 8 (0.15%) HTLV-I and -II, 21 (0.83%) syphilis, and 0 (0%) malaria. The NAT results for HBV, HCV, and HIV revealed 50 (0.91%), 1 (0.0002%), and 3 (0.05%) reactive samples, respectively. Reactive donations to screening serology tests of syphilis and HTLV-I/-II were neither confirmed nor declined by their corresponding confirmatory assays. Most "reactive" samples to TTI tests were associated with male gender, first-time donor, replacement donation, and O+ blood group. CONCLUSIONS: This study highlights the strong adherence to TTI testing policy and low prevalence of TTI markers among blood donors in the western region of Saudi Arabia.

The Prevalence of Lewis, Lutheran, and P1 Antigens and Phenotypes in Southwestern Saudi Arabia.

BACKGROUND: Inherited hemoglobinopathies are common in Jazan Province, Saudi Arabia, and some patients may frequently require a blood transfusion. Therefore, the provision of compatible units using extended phenotypes is necessary to preclude the risk of alloimmunization. This study aimed to investigate the frequencies of the Lewis (LE), Lutheran (LU), and P1 antigens, as well as determine the prevalence of LE and LU phenotypes. METHODS: This study collected 150 blood samples from Saudi Arabian anonymous volunteering blood donors at Prince Muhammed bin Nasser Hospital in Jazan Province, Saudi Arabia. Serotyping was performed using antigen profile-II based on gel card technology to determine LE, LU, and P1 antigens. RESULTS: The prevalence of antigens was as follows: Lea (n = 37, 24.6%), Leb (n = 87, 58%), Lua (n = 6, 4%), Lub (n = 150, 100%), and P1 (n = 120, 80%). Regarding the LE phenotypes, Le (a+b-) was 24.7%, Le (a-b+) was 58%, and Le (a-b-) was 17.3%. The frequencies of only observed LU phenotypes Lu (a-b+) and Lu (a+b+) were 96% and 4%, respectively. CONCLUSIONS: In summary, this study reports LE, LU, and P1 antigen prevalence. Moreover, LE and LU phenotype frequencies were investigated. This study may help establish a national database of blood group antigens in Jazan Province, Saudi Arabia. Additionally, it may provide better transfusion practice to avoid the alloimmunization risk.

Comparative Analysis of Properties in Chairside Silicone Denture Liners versus Heat-Cured Molloplast-B: An In-Depth In Vitro Evaluation.

BACKGROUND We investigated the bond strength, tensile strength, and water absorption properties of 4 widely used chairside silicone long-term denture soft lining materials and compared properties with those of heat-cured silicone material. MATERIAL AND METHODS Four chairside materials (GC Reline Soft, Mucopren Soft, Sofreliner Soft, and Elite Soft Relining) and a heat-cured silicone material (Molloplast B) were investigated. For tensile and shear bond strength and tensile strength, samples were prepared according to the manufacturers' instructions and the testing machine used. For water absorption, IOS 1567 was followed to prepare specimens. Bond strengths were measured using a Lloyd Instruments materials testing machine. Ten specimens for each test were prepared for each soft liner, except for water absorption and solubility tests, for which only 5 specimens were prepared. ANOVA, Bonferroni, and Kruskal-Wallis tests were used to compare values of materials and assess changes over time. RESULTS There was strong evidence of differences in the properties between materials. GC Reline Soft showed comparable tensile bond (1.4±0.6 MPa), shear bond (1.1±0.4 MPa), tensile strength (5.44±0.98), water absorption (0.92±0.2 µg/mm³), and solubility values (0.3±0.2 µg/mm3) to that of Molloplast B (1.4±0.4; 1.6±0.5; 4.53±0.9 MPa, 1.7±0.3, and 1.0±0.3 µg/mm³, respectively). The water solubility of Sofreliner Soft was significantly lower (1.5±0.8 µg/mm³) than that of Molloplast B. CONCLUSIONS There were significant differences between some properties of 4 chairside denture soft lining materials and that of Molloplast B, which had higher shear and tensile bond strength than chairside denture silicone soft lining materials but had the highest water solubility.

Online Questionnaire-Based Study to Evaluate the Attitudes and Use of Rubber Dental Dams by Saudi Dental Practitioners.

BACKGROUND A dental dam is a protective sheet with an aperture and is used to prevent the spread of infection during dental procedures. This study aimed to use a 2-part online questionnaire to evaluate the attitudes and use of rubber dental dams by 300 Saudi dental interns, general dental practitioners, residents, specialists, and consultants in prosthodontics, endodontics, and restorative dentistry. MATERIAL AND METHODS The 17-item validated questionnaire consisted of 5 questions on demographics, 2 on knowledge, 6 on attitudes, and 4 on perceptions. It was distributed through Google Forms. The chi-square test was used to determine the associations between the study variables and perception questions. RESULTS A total of 41.67% participants were specialists/consultants, among which 59.2% were in the prosthodontics specialty, 12.8% in endodontics, and 28% in restorative dentistry. Most participants (84.67%) stated the necessity of using rubber dams during post and core procedures. A total of 53.67% had received enough training for using rubber dams during their undergraduate/residency education. The majority of participants (41%) also preferred using rubber dams during the prefabricated post and core procedures, and 28.33% stated that the remaining tooth structure was one of the major reasons for not using rubber dams during the post and core procedures. CONCLUSIONS Workshops and hands-on training should be conducted among dental graduates to instill a positive attitude regarding the use of rubber dams.

Unlocking Endocrown Restoration Expertise Among Dentists: Insights from a Multi-Center Cross-Sectional Study.

BACKGROUND This study, employing an online questionnaire, aimed to assess and contrast the awareness, knowledge, and perceptions of dentists in Saudi Arabia (SA) regarding endocrowns (EC) as post-endodontic restorations with those of dentists educated in various other countries. MATERIAL AND METHODS We conducted a cross-sectional survey among dental interns and practicing dentists in government facilities, private dental centers, and dental colleges in SA, including participants of diverse nationalities. We disseminated validated, closed-ended questionnaires through WhatsApp via Google Forms. The Chi-square test was applied to assess associations between categorical variables, with a P-value of ≤0.05 indicating statistical significance. RESULTS The majority of participants (61.2%) indicated that EC restorations are best suited for molar teeth. Furthermore, 69.6% asserted that the primary objective of employing EC is to accomplish minimally invasive preparations while preserving the existing tooth structure. Among the responses, 68.3% pinpointed debonding of ECs as a significant cause of failure. Notably, substantial differences were observed in responses concerning the knowledge or practice of EC across various factors such as gender, educational attainment, country of graduation, and workplace. CONCLUSIONS The findings reveal a comparatively low adoption of ECs among the participants, irrespective of experience or country of education. This underscores the need for incorporating ECs into dental curricula through theoretical and clinical discussions or considering them as a subject for post-graduate continuing education programs.

Comparative Evaluation of Dimensional and Occlusal Accuracy of Non-Working Antagonist Casts: A Study on Different Impression Materials and 3D Printing.

BACKGROUND The aim of this study was to assess and compare the vertical/horizontal dimensions and occlusal accuracy of non-working/opposing casts obtained from three different impression materials and 3D print cast. MATERIAL AND METHODS Dentulous Master models simulating a case of a fixed dental prosthesis were mounted on an articulator (control group). Opposing mandibular casts obtained from three different impression materialsand 3-dimensional print constituted test groups , ,and , respectively. Three points, anterior vertical (AV), posterior vertical (PV), and anteroposterior (AP) were compared for dimensional accuracy among casts. Occlusal accuracy was analyzed on Medit Link software at 3 teeth (#13, #17, and #27). After calculating means for each group, the differences were calculated at probability value of P≤0.05 using the single-sample t test, ANOVA, and Tukey test. RESULTS The dimensions were significantly different from those of the mounted master models except in Gp AL(E) and Gp AL(F) at AV dimension and Gp AL(E) at AP dimension (P>0.05). A statistically significant difference of the error of means among the 4 tested groupswere detected only at 2 dimensions (AV and PV) between the Gp AL(E) and Gp 3D-C and between Gp AL(F) and Gp 3D-C groups. Other groups showed no significant differences. CONCLUSIONS The opposing casts obtained from the extended-pour alginate and alginate alternative impression materials showed higher occlusal accuracy compared to conventional alginate and 3D printed casts.

Development of a Novel, Ecologically Friendly Generation of pH-Responsive Alginate Nanosensors: Synthesis, Calibration, and Characterisation.

Measurement of the intracellular pH is particularly crucial for the detection of numerous diseases, such as carcinomas, that are characterised by a low intracellular pH. Therefore, pH-responsive nanosensors have been developed by many researchers due to their ability to non-invasively detect minor changes in the pH of many biological systems without causing significant biological damage. However, the existing pH-sensitive nanosensors, such as the polyacrylamide, silica, and quantum dots-based nanosensors, require large quantities of organic solvents that could cause detrimental damage to the ecosystem. As a result, this research is aimed at developing a new generation of pH-responsive nanosensors comprising alginate natural polymers and pH-sensitive fluorophores using an organic, solvent-free, and ecologically friendly method. Herein, we successfully synthesised different models of pH-responsive alginate nanoparticles by varying the method of fluorophore conjugation. The synthesised pH nanosensors demonstrated a low MHD with a relatively acceptable PDI when using the lowest concentration of the cross-linker Ca+2 (1.25 mM). All the pH nanosensors showed negative zeta potential values, attributed to the free carboxylate groups surrounding the nanoparticles' surfaces, which support the colloidal stability of the nanosensors. The synthesised models of pH nanosensors displayed a high pH-responsiveness with various correlations between the pH measurements and the nanosensors' fluorescence signal. In summation, pH-responsive alginate nanosensors produced using organic, solvent-free, green technology could be harnessed as potential diagnostics for the intracellular and extracellular pH measurements of various biological systems.