RESUMO
In this study, bare zero-valent iron nanoparticles (nZVI) have been modified using polyethylene glycol (PEG) of various molecular weight in a facile technique. The synthesized nZVI modified with PEG, M.W. of 600 and 6000 was denoted by nZVI-PEG600 and nZVI-PEG6000, respectively, and compared their catalytic activity towards the reductive degradation of Congo red (CR) using NaBH4.The existence of PEG layer surrounds the nZVI core was confirmed by several characterization tools, such as XRD, FTIR, FESEM and TEM. Herein, both nZVI-PEG600 and nZVI-PEG6000 exhibited remarkable removal efficiencies of 89.6% and 99.2% within 14 min of reaction time. The optimum reaction parameters were found to be as follows: 0.2 g L-1 catalyst dose and initial dye concentration of 2 × 10-5 molL-1 etc. Kinetic studies of dye degradation were investigated which follow pseudo-1st-order kinetics. The TOC analysis confirmed the complete mineralization of CR dye by nZVI-PEG6000 nanocatalyst. GCMS analysis of plausible degraded products was performed to elucidate a probable mechanistic pathway of CR degradation. Further, we have investigated the degradation of two anionic dyes mixture, i.e., CR and methyl orange (MO) using best catalyst, i.e., nZVI-PEG6000.
Assuntos
Nanopartículas Metálicas , Poluentes Químicos da Água , Ferro/análise , Vermelho Congo/análise , Águas Residuárias , Cinética , Polietilenoglicóis , Corantes , Poluentes Químicos da Água/análise , AdsorçãoRESUMO
The present study demonstrates an intensive experimental work based on the tin oxide (SnO2) nanoparticle synthesis which was successfully carried out by a simple conventional precipitation method followed by calcination at 700 °C. The synthesized nanoparticles were characterized by X-ray powder diffraction (XRD), UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDAX). The XRD pattern proves that tetragonal rutile structure SnO2 nanoparticles were formed. The crystallite particle size calculation from Scherer's equation revealed the average size of 28.5 nm. The absorption spectrum of SnO2 nanoparticles showed absorption band at about 290 nm and the band gap energy (Eg) from Tauc plot was obtained at 3.8 eV. The photocatalytic degradation of pharmaceutical compound, 4-aminopyridine (5 ppm) using synthesized SnO2 nanoparticle, was assessed. The effect of variable catalyst dosage, pH and irradiation sources, were studied. The optimum catalyst dosage and pH were found to be 1.5 gm/L and 6.5, respectively. The degradation efficiency of water contaminant 4-aminopyridine under UV light and solar light irradiation for 120 min were found to be 97% and 11%, respectively. The reusability of the catalyst was checked and has been found stable after three photocatalytic runs.
Assuntos
Nanopartículas , Água , Catálise , Análise Custo-Benefício , Difração de Raios XRESUMO
The present study aims to appraise the spatial distribution of potential toxic metals by using geostatistical technique and find their associated ecological and human health risks from surface soils of Durgapur industrial area, India. The results show that the mean metal concentrations are 116.03, 32.96, 154.37, 321.20, 50.08, 29.54 and 2.97 mg/kg for Pb, Cd, Cr, Fe, Cu, Ni and Hg, respectively, and majority of them is found higher than their background and world natural soil concentrations. The GIS contour map of pollution load index values clearly distinguished the studied sampling area is highly to very highly polluted by the toxic metals. Contamination factor (Cf) and geo-accumulation index (Igeo) values of studied metals show a similar sequence of Hg > Cd > Pb > Fe > Cr > Ni > Cu. Calculated enrichment factor (EF) value for Hg (13.29), Cd (5.26) and Pb (1.11) in studied soils was found significantly higher, which suggests that their primary sources are higher industrial activities in the studied area. Computation of potential ecological risk index reveals that the entire study area is under high risk level (1941.60-3367.23), in which Cd (588.52) and Hg (1979.26) possess the maximum ecological risk factor in all the sampling sites. The results of correlation analysis, principle component analysis and cluster analysis explore that industrial discharges, atmospheric disposition and waste disposal are the major sources of soil metal pollution in the studied region. Human health hazard indices are lower than 1 for all metals, indicating low non-carcinogenic risks to children and adults. Carcinogenic risk assessment reveals the existence of cancer risk of Cd (5.5E-03), Cr (8.6E-04) and Ni (3.0E-04) to child and Cd (8.2E-04) and Cr (1.3E-04) to adults in Durgapur.
Assuntos
Indústrias , Metais Pesados/análise , Poluentes do Solo/análise , Solo/química , Monitoramento Ambiental , Humanos , Índia , Metais Pesados/toxicidade , Medição de Risco , Poluentes do Solo/toxicidadeRESUMO
The present study is focused on the removal of Hg2+, Cd2+ and Pb2+ ions from aqueous solution using a tridentate chelating agent, 2-pyridyl-N-(2'-methylthiophenyl) methyleneimine (PMTPM); and applicability of such removal from industrial wastewater using PMTPM is also investigated. The results showed that the metal ions removal efficiency using PMTPM was in the order of Hg2+(99.46%) > Cd2+(95.42%) > Pb2+(94.54%) under optimum reaction conditions (L:M2+ = 3:1, pH = 9, time = 24 h, temp. = 30 °C). Formed chelated complexes such as [Hg(PMTPM)Cl2] (1), [Cd(PMTPM)Cl2] (2) and [Pb(PMTPM)Cl2] (3) were characterized by numerous spectroscopic tools and X-ray structure determination of a representative complex of Hg2+. In the X-ray structure of [Hg(PMTPM)Cl2], 1, the Hg2+ adopted a distorted tetrahedral coordination geometry surrounding two N donors of PMTPM and two chloride ions. A similar coordination geometry surrounding the respective metal centres in 2 and 3 was established. The thermogravimetric analysis (TGA) revealed a stability order of [Cd(PMTPM)Cl2] > [Hg(PMTPM)Cl2] > [Pb(PMTPM)Cl2]. Further the comparative metal leaching behaviour of these chelate complexes exhibited higher stability in alkaline solution than in acidic. Moreover, PMTPM was applied in real mixed industrial wastewater with alkaline pH, and adequate removals of toxic metals were achieved.
Assuntos
Metais Pesados/química , Poluentes Químicos da Água/química , Purificação da Água/métodos , Cádmio/análise , Cádmio/química , Quelantes , Cristalografia por Raios X , Iminas/química , Chumbo/análise , Chumbo/química , Mercúrio/análise , Mercúrio/química , Metais Pesados/análise , Águas Residuárias , Poluentes Químicos da Água/análiseRESUMO
In the present work zinc oxide nanorods (ZNRs) have been synthesized to estimate its photocatalytic degradation potential on an industrially used diazo dye and optimization of the total treatment process has been designed. Response surface methodology (RSM) has been used to model the operational parameters for this photocatalytic degradation. The crystallite size (101 plane) of the synthesized ZNR has been found to be 20.99 nm having a band gap energy of 3.45 eV. At elevated pH, the rate of degradation of the photocatalyst was found to be higher than that of acidic pH. The independent variables of the model are time (9.6-122 min), pH (2-12.2), catalyst dose (0.2-0.4 g/L) and dye concentration (88-512 mg/L). It was seen that the degradation efficiency was significantly affected by the initial dye concentration and the pH, the optimal values of the parameters being a pH of 10.67, an initial concentration of 150 mg/L and ZnO dose of 0.37 g/L, the time taken being 88.52 min. The actual degradation efficiency of the dye reached 96.9% at optimized condition, which is quite close to the predicted value of 98.07%.
Assuntos
Compostos Azo/química , Corantes/química , Nanotubos/química , Óxido de Zinco/química , Catálise , Estrutura Molecular , Óxido de Zinco/síntese químicaRESUMO
Experimental investigations were conducted to evaluate the toxic effects of different arsenic (As) species such as arsenite (As(III)), arsenate (As(V)) and dimethylarsinic acid (DMA) on the growth of okra (Abelmoschus esculentus). The present study describes the changes in the growth, yield and accumulation characteristics of okra plants spiked with 20 and 50 mg kg(-1) of As(III), As(V) and DMA. As species negatively affected the yield and growth of the plant.The availability of arsenic compounds in the aerial parts decreased in the order As(V) > As(III) > DMA and in the roots observed as As(III) > As(V) > DMA. The results showed that except As(V), okra accumulated As(III) and DMA mainly in its roots with limited transport to shoots. Thus the plant has the capacity to tolerate As stress and can be considered as a resistive variety. The study also reveals that removal of As by boiling the vegetables with excess of water is not possible.
Assuntos
Abelmoschus/efeitos dos fármacos , Abelmoschus/crescimento & desenvolvimento , Arseniatos/metabolismo , Arsenitos/metabolismo , Ácido Cacodílico/metabolismo , Abelmoschus/metabolismo , Arseniatos/toxicidade , Arsenitos/toxicidade , Biodegradação Ambiental , Biomassa , Ácido Cacodílico/toxicidade , Componentes Aéreos da Planta/efeitos dos fármacos , Componentes Aéreos da Planta/crescimento & desenvolvimento , Componentes Aéreos da Planta/metabolismo , Raízes de Plantas/efeitos dos fármacos , Raízes de Plantas/crescimento & desenvolvimento , Raízes de Plantas/metabolismo , Solo/químicaRESUMO
Antibiotics are widely prioritized pharmaceuticals frequently adopted in medication for addressing numerous ailments of humans and animals. However, the non-judicious disposal of ciprofloxacin (CIP) with concentration levels exceeding threshold limit in an aqueous environment has been the matter of growing concern nowadays. CIP is found in various waterways with appreciable mobility due to its limited decay in solidified form. Hence, the effective eradication strategy of this non-steroidal anti-inflammatory antibiotic from aqueous media is pivotal for preventing the users and the biosphere from their hazardous impacts. Reportedly several customary techniques like reverse osmosis, precipitation, cross-filtration, nano-filtration, ion exchange, microbial remediation, and adsorption have been employed to eliminate CIP from water. Out of them, adsorption is ascertained to be a potential method because of lesser preliminary investment costs, ease of operation, greater efficiency, less energy usage, reduced chemical and biological slurry production, and ready availability of precursor materials. Towards remediation of ciprofloxacin-laden water, plenty of researchers have used different adsorbents. However, the present-day challenge is opting the promising sorbent and its application towards industrial scale-up which is vital to get reviewed. In this article, adsorbents of diverse origins are reviewed in terms of their performances in CIP removal. The review stresses the impact of various factors on sorptive assimilation of CIP, adsorption kinetics, isotherms, mechanism of ionic interaction, contrivances for CIP detection, cost estimation and reusability assessments of adsorbents also that may endorse the next-generation investigators to decide the efficacious, environmental appealing and cost-competitive adsorbents for effective riddance of CIP from wastewater.
Assuntos
Ciprofloxacina , Poluentes Químicos da Água , Humanos , Ciprofloxacina/análise , Antibacterianos , Águas Residuárias , Adsorção , Água , Preparações Farmacêuticas , Poluentes Químicos da Água/análiseRESUMO
Adsorptive removal of copper by activated carbon derived from modified rice husk (ACRH) was studied in the presence and absence of magnetic field (MF). The ACRH was prepared from the normal rice husk treated by NaOH solution and subsequent pyrolysis at 450 °C in the absence of oxygen. The physicochemical properties of ACRH's were determined before and after the adsorption process to delineate the adsorption mechanism. The BET analysis confirmed that the fabricated ACRH has a specific surface area of 8.244 m2/g with a mesopore to micropore ratio of 0.974. It was observed that the micropore structure gradually replaced the mesopores, and the surface area of the micropore increased (from 0.9219 to 4.1764 m2/g), and the pore diameter was also decreased from 180.381 to 46.249 Å after pyrolysis. The CHNO/S test result reveals that the carbon content was increased from 42 to 67.8% in the ACRH after pyrolysis. The batch sorption studies were performed by varying the initial adsorbate concentration, temperature, agitation speed, pH, adsorbent dose and contact time for magnetic and non-magnetic conditions to analyze the effect of the magnetic field. The univariate studies show that the maximum experimental adsorption capacity was 4.522 mg/g and 3.855 mg/g, respectively, for these two conditions (representing the magnetic impact) at 25 °C with an adsorbent dose of 2 g/L and an agitation speed of 150 rpm. It was also observed that the removal efficiency was 94.55% and 77.96% (magnetic and non-magnetic condition) at pH 7 with a concentration of 10 mg/L in 2 h. The test result on the impact of exposure time on the magnetic field suggested that the magnetic memory influenced the removal efficiency; after 40 to 60 min, the maximum removal efficiency was achieved, around 80 to 90%. The pseudo-second-order kinetic model was best fitted with the experimental data with a rate constant as 0.1749 and 0.1006 g/mg/min for these two conditions. The Temkin model delineates the adsorption isotherm suggesting the heat generated during the adsorption process is linearly abate with the coverage of the surface area of the adsorbent. The thermodynamic model confirms that the copper adsorption is spontaneous (ΔG = - 3.91 kJ/mol and - 6.02 kJ/mol), wherein the negative enthalpy value (ΔH = - 36.74 kJ/mol and - 25.74 kJ/mol) suggested that the process is exothermic irrespective of magnetic interference. The significant enhancement of copper removal was observed by incorporating the magnetic field, showing an increase in sorption capacity by 17.48% and a reduction of reaction time by 88.12%.
Assuntos
Oryza , Poluentes Químicos da Água , Purificação da Água , Adsorção , Carvão Vegetal , Cobre , Concentração de Íons de Hidrogênio , Cinética , Campos Magnéticos , Oryza/química , Termodinâmica , Poluentes Químicos da Água/químicaRESUMO
MgO micro-rods supported on porous carbon were synthesized by an economical method and applied for the adsorption of three different heavy metals ions (As (III), Cd (II) and Pb (II)). Here, we used dextrose as the source of carbon during the synthesis. The synthesized material has been characterized by different techniques like XRD, TEM, FE-SEM, BET and FT-IR for the determination of various physical properties. Compared with MgO synthesized without dextrose, the carbon-supported MgO or C-MgO demonstrated consistent rod-shaped morphology, higher surface area and better absorptivity. The adsorption data were analysed using various isotherm models and the Freundlich isotherm model seemed to provide the best fit to the data. The adsorption kinetics data on the other hand was well explicated by the pseudo second-order kinetic model. The maximum adsorption capacity of C-MgO was 508.47 mg g-1 for As (III), 566.01 mg g-1 for Cd (II) and 476.19 mg g-1 for Pb (II), respectively after 6 h of reaction. To check the real-life usability and efficiency of C-MgO, it was added to a groundwater sample which had 169.55 ppb of As (III) and within 20 min it was adsorbed with 99% efficiency. Reusability studies reveal that C-MgO could be used up to 6 times with more than 60% efficiency. This study shows that C-MgO has high adsorptive ability, is an economic and non-toxic material with versatile applications and can be used for groundwater remediation in real life.
Assuntos
Água Subterrânea , Metais Pesados , Poluentes Químicos da Água/análise , Adsorção , Glucose , Cinética , Óxido de Magnésio , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Spatial and seasonal distribution of PAHs, source identification, and their associated carcinogenic health risk was investigated in street dust of Durgapur, India. Street dust is an important indicator to detect the quality of the environment as well as the sources of pollutants. The obtained results showed fluctuation in PAHs concentrations from 2317 ± 402 ng/g to 5491 ± 2379 ng/g along with the sampling sites. Seasonal variation revealed higher PAHs concentrations in the winter season (5401 ± 993 ng/g) with the maximum presence of 4-ring PAHs. Two-way analysis of variance (ANOVA) exposed that the sites, seasons and site-season interactions were vividly affected by dissimilar PAHs. The PAHs source identification was investigated by principal component analysis (PCA), positive matrix factorization (PMF), diagnostic ratios, and they revealed pyrogenic, diesel, gasoline, wood and coal combustion to be the key sources of the PAHs in street dust. Obtained results from incremental lifetime cancer risk (ILCR) model exhibited the carcinogenic risk for children ranged from 2.4E-06 to 3.8E-06 while 2.1E-06 to 3.4E-06 for adults which were above the baseline value 1.0E-06. The Monte Carlo simulation model identified cumulative cancer risk of sixteen PAHs in 50th percentile were 2.8 and 1.7 times more while in 95th percentile, the values were 8.8 and 7.8 times higher than the acceptable value of 1E-06 for child and adult respectively.
Assuntos
Poluentes Atmosféricos , Hidrocarbonetos Policíclicos Aromáticos , Adulto , Criança , China , Poeira , Monitoramento Ambiental , Humanos , Índia , Método de Monte Carlo , Medição de RiscoRESUMO
NZVI has long been used for the remediation of different groundwater contaminants but their tendency to get oxidized easily has always been a barrier to their reductive ability. In this work, we have made an attempt to enhance the aerobic stability of the nanoparticles by synthesizing them in a medium consisting of a viscous solvent, glycerol, and water. The XRD analysis of the nanoparticles reveals that the particles prepared in the presence of glycerol have a very thin coating of iron oxides on the outer surface of the nanoparticles in comparison with those prepared in the aqueous medium. These nanoparticles were applied for the simultaneous reduction of two groundwater contaminants, nitrate ions, and alachlor, which is an herbicide. Stock solutions of these two contaminants were prepared and then they were mixed in varying amounts and were treated by different doses of the nanoparticle. The optimized dose of the nanoparticles obtained for almost 97% removal of both the contaminants is 2.05 g/L. The studies showed that increasing the concentration of either of the contaminants while the other one was kept fixed led to a decrease in the removal efficiency. The studies conducted to see the effect of pH variation showed that the best removal can be achieved when the pH is 3 or even less than it, showing that acidic pH leads to higher removal values. Such nanoparticles which can be prepared easily at low-cost and can simultaneously act upon different contaminants are highly desired.