Homogenized contact in all-perovskite tandems using tailored 2D perovskite.

The fabrication of scalable all-perovskite tandem solar cells is considered an attractive route to commercialize perovskite photovoltaic modules1. However, The certified efficiency of 1-cm2 scale all-perovskite tandem solar cells lags behind their small-area (~0.1 cm2) counterparts2,3. This performance deficit originates from inhomogeneity in wide-bandgap (WBG) perovskite solar cells (PSCs) at a large scale. The inhomogeneity is known to be introduced at the bottom interface and within the perovskite bulk itself4,5. Here we uncover another crucial source for the inhomogeneity - the top interface formed during the deposition of the electron transport layer (ETL, C60). Meanwhile, the poor ETL interface is also a significant limitation of device performance. We address this issue by introducing a mixture of 4-fluorophenethylamine (F-PEA) and 4-trifluoromethyl-phenylammonium (CF3-PA) to create a tailored two-dimensional perovskite layer (TTDL), in which F-PEA forms a two-dimensional perovskite at the surface reducing contact losses and inhomogeneity, CF3-PA enhances charge extraction and transport. As a result, we demonstrate a high open-circuit voltage of 1.35 V and an efficiency of 20.5% in 1.77-eV WBG PSCs at a square centimeter scale. By stacking with a narrow-bandgap perovskite sub-cell, we report 1.05 cm2 all-perovskite tandem cells delivering 28.5% (certified 28.2%) efficiency, the highest among all reported so far. Our work showcases the importance of treating the top perovskite/ETL contact for upscaling perovskite solar cells.

Homomeric chains of intermolecular bonds scaffold octahedral germanium perovskites.

Perovskites with low ionic radii metal centres (for example, Ge perovskites) experience both geometrical constraints and a gain in electronic energy through distortion; for these reasons, synthetic attempts do not lead to octahedral [GeI6] perovskites, but rather, these crystallize into polar non-perovskite structures1-6. Here, inspired by the principles of supramolecular synthons7,8, we report the assembly of an organic scaffold within perovskite structures with the goal of influencing the geometric arrangement and electronic configuration of the crystal, resulting in the suppression of the lone pair expression of Ge and templating the symmetric octahedra. We find that, to produce extended homomeric non-covalent bonding, the organic motif needs to possess self-complementary properties implemented using distinct donor and acceptor sites. Compared with the non-perovskite structure, the resulting [GeI6]4- octahedra exhibit a direct bandgap with significant redshift (more than 0.5 eV, measured experimentally), 10 times lower octahedral distortion (inferred from measured single-crystal X-ray diffraction data) and 10 times higher electron and hole mobility (estimated by density functional theory). We show that the principle of this design is not limited to two-dimensional Ge perovskites; we implement it in the case of copper perovskite (also a low-radius metal centre), and we extend it to quasi-two-dimensional systems. We report photodiodes with Ge perovskites that outperform their non-octahedral and lead analogues. The construction of secondary sublattices that interlock with an inorganic framework within a crystal offers a new synthetic tool for templating hybrid lattices with controlled distortion and orbital arrangement, overcoming limitations in conventional perovskites.

High-Efficiency Circularly Polarized Light-Emitting Diodes Based on Chiral Metal Nanoclusters.

Circularly polarized light-emitting diodes (CP-LEDs) are critical for next-generation optical technologies, ranging from holography to quantum information processing. Currently deployed chiral luminescent materials, with their intricate synthesis and processing and limited efficiency, are the main bottleneck for CP-LEDs. Chiral metal nanoclusters (MNCs) are potential CP-LED materials, given their ease of synthesis and processability as well as diverse structures and excited states. However, their films are usually plagued by inferior electronic quality and aggregation-caused photoluminescence quenching, necessitating their incorporation into host materials; without such a scheme, MNC-based LEDs exhibit external quantum efficiencies (EQEs) < 10%. Herein, we achieve an efficiency leap for both CP-LEDs and cluster-based LEDs by using novel chiral MNCs with aggregation-induced emission enhancement. CP-LEDs using enantiopure MNC films attain EQEs of up to 23.5%. Furthermore, by incorporating host materials, the devices yield record EQEs of up to 36.5% for both CP-LEDs and cluster-based LEDs, along with electroluminescence dissymmetry factors (|gEL|) of around 1.0 × 10-3. These findings open a new avenue for advancing chiral light sources for next-generation optoelectronics.

Multiple Stabilization Effects of Benzylhydrazine on Scalable Perovskite Precursor Inks for Improved Perovskite Solar Cell Production.

Perovskite precursor inks suffer various forms of degradation, such as iodide anion oxidation and organic cation breakdown, hindering reliable perovskite solar cell manufacturing. Here we report that benzylhydrazine hydrochloride (BHC) not only retards the buildup of iodine as previously reported but also prevents the breakdown of organic cations. Through investigating BHC and iodine chemical reactions, we elucidate protonation and dehydration mechanisms, converting BHC to harmless volatile compounds, thus preserving perovskite film crystallization and solar cell performance. This inhibition effect lasts nearly a month with minimal BHC, contrasting control inks without BHC where organic cations fully react in less than a week. This enhanced understanding, from additive stabilization to end products, promises improved perovskite solar cell production reliability.

2D Hybrid Perovskites Employing an Organic Cation Paired with a Neutral Molecule.

Two-dimensional (2D) hybrid perovskites harness the chemical and structural versatility of organic compounds. Here, we explore 2D perovskites that incorporate both a first organic component, a primary ammonium cation, and a second neutral organic module. Through the experimental examination of 42 organic pairs with a range of functional groups and organic backbones, we identify five crystallization scenarios that occur upon mixing. Only one leads to the cointercalation of the organic modules with distinct and extended interlayer spacing, which is observed with the aid of X-ray diffraction (XRD) pattern analysis combined with cross-sectional transmission electron microscopy (TEM) and elemental analysis. We present a picture in which complementary pairs, capable of forming intermolecular bonds, cocrystallize with multiple structural arrangements. These arrangements are a function of the ratio of organic content, annealing temperature, and substrate surface characteristics. We highlight how noncovalent bonds, particularly hydrogen and halogen bonding, enable the influence over the organic sublattice in hybrid halide perovskites.

High-Throughput Exploration of Triple-Cation Perovskites via All-in-One Compositionally-Graded Films.

Many devices heavily rely on combinatorial material optimization. However, new material alloys are classically developed by studying only a fraction of giant chemical space, while many intermediate compositions remain unmade in light of the lack of methods to synthesize gapless material libraries. Here report a high-throughput all-in-one material platform to obtain and study compositionally-tunable alloys from solution is reported. This strategy is applied to make all Csx MAy FAz PbI3 perovskite alloys (MA and FA stand for methylammonium and formamidinium, respectively), in less than 10 min, on a single film, on which 520 unique alloys are then studied. Through stability mapping of all these alloys in air supersaturated with moisture, a range of targeted perovskites are found, which are then chosen to make efficient and stable solar cells in relaxed fabrication conditions, in ambient air. This all-in-one platform provides access to an unprecedented library of compositional space with no unmade alloys, and hence aids in a comprehensive accelerated discovery of efficient energy materials.

Coupling Perovskite Quantum Dot Pairs in Solution using a Nanoplasmonic Assembly.

Perovskite quantum dots (PQDs) provide a robust solution-based approach to efficient solar cells, bright light emitting devices, and quantum sources of light. Quantifying heterogeneity and understanding coupling between dots is critical for these applications. We use double-nanohole optical trapping to size individual dots and correlate to emission energy shifts from quantum confinement. We were able to assemble a second dot in the trap, which allows us to observe the coupling between dots. We observe a systematic red-shift of 1.1 ± 0.6 meV in the emission wavelength. Theoretical analysis shows that the observed shift is consistent with resonant energy transfer and is unusually large due to moderate-to-large quantum confinement in PQDs. This demonstrates the promise of PQDs for entanglement in quantum information applications. This work enables future in situ control of PQD growth as well as studies of the coupling between small PQD assemblies with quantum information applications in mind.

Multi-cation perovskites prevent carrier reflection from grain surfaces.

The composition of perovskite has been optimized combinatorially such that it often contains six components (AxByC1-x-yPbXzY3-z) in state-of-art perovskite solar cells. Questions remain regarding the precise role of each component, and the lack of a mechanistic explanation limits the practical exploration of the large and growing chemical space. Here, aided by transient photoluminescence microscopy, we find that, in perovskite single crystals, carrier diffusivity is in fact independent of composition. In polycrystalline thin films, the different compositions play a crucial role in carrier diffusion. We report that methylammonium (MA)-based films show a high carrier diffusivity of 0.047 cm2 s-1, while MA-free mixed caesium-formamidinium (CsFA) films exhibit an order of magnitude lower diffusivity. Elemental composition studies show that CsFA grains display a graded composition. This curtails electron diffusion in these films, as seen in both vertical carrier transport and surface potential studies. Incorporation of MA leads to a uniform grain core-to-edge composition, giving rise to a diffusivity of 0.034 cm2 s-1 in CsMAFA films. A model that invokes competing crystallization processes allows us to account for this finding, and suggests further strategies to achieve homogeneous crystallization for the benefit of perovskite optoelectronics.

Magnetic optical rotary dispersion and magnetic circular dichroism in methylammonium lead halide perovskites.

Large magnetic optical rotary dispersion (Faraday rotation) has been demonstrated recently in methylammonium lead bromide. Here, we investigate the prospect of extending the active spectral range by altering the halogen. We also investigate the origins of large Faraday rotation in these diamagnetic materials using magnetic circular dichroism (MCD) spectroscopy and the Kramers-Kronig relations. We find that, while MAPbCl3 (MA = methylammonium) single crystals exhibit a large Verdet constant in the blue, no appreciable Faraday rotation is observed in the red/near infra-red for MAPbI3 single crystals. However, in all film samples, we find clear evidence of large MCD resulting from the Zeeman splitting of the highly resonant 1s exciton state. Our Kramers-Kronig calculations of Faraday rotation based on MCD data matches well with the dispersion of our experimental data for MAPbCl3 and MAPbBr3 , with some deviation in magnitude-demonstrating the excitonic nature of Faraday rotation in these materials. However, our calculations predict significant Faraday rotation in MAPbI3 , contrary to our experimental results, indicating a potential discrepancy between the properties of the thin film and single crystal.

All-Inorganic Quantum-Dot LEDs Based on a Phase-Stabilized α-CsPbI3 Perovskite.

The all-inorganic nature of CsPbI3 perovskites allows to enhance stability in perovskite devices. Research efforts have led to improved stability of the black phase in CsPbI3 films; however, these strategies-including strain and doping-are based on organic-ligand-capped perovskites, which prevent perovskites from forming the close-packed quantum dot (QD) solids necessary to achieve high charge and thermal transport. We developed an inorganic ligand exchange that leads to CsPbI3 QD films with superior phase stability and increased thermal transport. The atomic-ligand-exchanged QD films, once mechanically coupled, exhibit improved phase stability, and we link this to distributing strain across the film. Operando measurements of the temperature of the LEDs indicate that KI-exchanged QD films exhibit increased thermal transport compared to controls that rely on organic ligands. The LEDs exhibit a maximum EQE of 23 % with an electroluminescence emission centered at 640 nm (FWHM: ≈31 nm). These red LEDs provide an operating half-lifetime of 10 h (luminance of 200 cd m-2 ) and an operating stability that is 6× higher than that of control devices.

Chloride Insertion-Immobilization Enables Bright, Narrowband, and Stable Blue-Emitting Perovskite Diodes.

Metal halide perovskites show promise for light-emitting diodes (LEDs) owing to their facile manufacture and excellent optoelectronic performance, including high color purity and spectral stability, especially in the green region. However, for blue perovskite LEDs, the emission spectrum line width is broadened to over 25 nm by the coexistence of multiple reduced-dimensional perovskite domains, and the spectral stability is poor, with an undesirable shift (over 7 nm) toward longer wavelengths under operating conditions, degradation that occurs due to phase separation when mixed halides are employed. Here we demonstrate chloride insertion-immobilization, a strategy that enables blue perovskite LEDs, the first to exhibit narrowband (line width of 18 nm) and spectrally stable (no wavelength shift) performance. We prepare bromide-based perovskites and then employ organic chlorides for dynamic treatment, inserting and in situ immobilizing chlorides to blue-shift and stabilize the emission. We achieve sky-blue LEDs with a record luminance over 5100 cd/m2 at 489 nm, and an operating half-life of 51 min at 1500 cd/m2. By device structure optimization, we further realize an improved EQE of 5.2% at 479 nm and an operating half-life of 90 min at 100 cd/m2.

Learning-in-Templates Enables Accelerated Discovery and Synthesis of New Stable Double Perovskites.

In the past three years, machine learning (ML) in combination with density functional theory (DFT) has enabled computational screening of compounds with the goal of accelerated materials discovery. Unfortunately, DFT+ML has, until now, either relied on knowledge of the atomic positions at DFT energy minima, which are a priori unknown, or been limited to chemical spaces of modest size. Here we report a strategy that we term learning-in-templates (LiT), wherein we first define a series of space group and stoichiometry templates corresponding to hypothesized compounds and, orthogonally, we allow any list of atoms to take on any template. The LiT approach is deployed in combination with previously established position-dependent representations and performs best with the representations that rely least on the atomic positions. Since the positions of the atoms in templates are known and do not change, LiT enables us to infer the properties of interest directly; additionally, LiT allows working with increased chemical spaces, since the same elements can take on a large number of templates. Only by using LiT were we able to span 5 × 106 double-perovskite compounds and achieve an acceleration factor of 700 compared to brute-force DFT, allowing us to predict never-before-screened compounds. Our findings motivated us to synthesize a new BaCu yTa(1- y)S3 perovskite, which we show using an electron probe microanalyzer has a 5:3 molar ratio of Cu to Ta and, using powder X-ray diffraction (XRD) analysis combined with a DFT-based XRD simulation and fitting, indicate a new phase having an I4/ m space group.

Halogen Vacancies Enable Ligand-Assisted Self-Assembly of Perovskite Quantum Dots into Nanowires.

Interest has been growing in defects of halide perovskites in view of their intimate connection with key material optoelectronic properties. In perovskite quantum dots (PQDs), the influence of defects is even more apparent than in their bulk counterparts. By combining experiment and theory, we report herein a halide-vacancy-driven, ligand-directed self-assembly process of CsPbBr3 PQDs. With the assistance of oleic acid and didodecyldimethylammonium sulfide, surface-Br-vacancy-rich CsPbBr3 PQDs self-assemble into nanowires (NWs) that are 20-60 nm in width and several millimeters in length. The NWs exhibit a sharp photoluminescence profile (≈18 nm full-width at-half-maximum) that peaks at 525 nm. Our findings provide insight into the defect-correlated dynamics of PQDs and defect-assisted fabrication of perovskite materials and devices.

Double Charged Surface Layers in Lead Halide Perovskite Crystals.

Understanding defect chemistry, particularly ion migration, and its significant effect on the surface's optical and electronic properties is one of the major challenges impeding the development of hybrid perovskite-based devices. Here, using both experimental and theoretical approaches, we demonstrated that the surface layers of the perovskite crystals may acquire a high concentration of positively charged vacancies with the complementary negatively charged halide ions pushed to the surface. This charge separation near the surface generates an electric field that can induce an increase of optical band gap in the surface layers relative to the bulk. We found that the charge separation, electric field, and the amplitude of shift in the bandgap strongly depend on the halides and organic moieties of perovskite crystals. Our findings reveal the peculiarity of surface effects that are currently limiting the applications of perovskite crystals and more importantly explain their origins, thus enabling viable surface passivation strategies to remediate them.

Making and Breaking of Lead Halide Perovskites.

A new front-runner has emerged in the field of next-generation photovoltaics. A unique class of materials, known as organic metal halide perovskites, bridges the gap between low-cost fabrication and exceptional device performance. These compounds can be processed at low temperature (typically in the range 80-150 °C) and readily self-assemble from the solution phase into high-quality semiconductor thin films. The low energetic barrier for crystal formation has mixed consequences. On one hand, it enables inexpensive processing and both optical and electronic tunability. The caveat, however, is that many as-formed lead halide perovskite thin films lack chemical and structural stability, undergoing rapid degradation in the presence of moisture or heat. To date, improvements in perovskite solar cell efficiency have resulted primarily from better control over thin film morphology, manipulation of the stoichiometry and chemistry of lead halide and alkylammonium halide precursors, and the choice of solvent treatment. Proper characterization and tuning of processing parameters can aid in rational optimization of perovskite devices. Likewise, gaining a comprehensive understanding of the degradation mechanism and identifying components of the perovskite structure that may be particularly susceptible to attack by moisture are vital to mitigate device degradation under operating conditions. This Account provides insight into the lifecycle of organic-inorganic lead halide perovskites, including (i) the nature of the precursor solution, (ii) formation of solid-state perovskite thin films and single crystals, and (iii) transformation of perovskites into hydrated phases upon exposure to moisture. In particular, spectroscopic and structural characterization techniques shed light on the thermally driven evolution of the perovskite structure. By tuning precursor stoichiometry and chemistry, and thus the lead halide charge-transfer complexes present in solution, crystallization kinetics can be tailored to yield improved thin film homogeneity. Because degradation of the as-formed perovskite film is in many ways analogous to its initial formation, the same suite of monitoring techniques reveals the moisture-induced transformation of low band gap methylammonium lead iodide (CH3NH3PbI3) to wide band gap hydrate compounds. The rate of degradation is increased upon exposure to light. Interestingly, the hydration process is reversible under certain conditions. This facile formation and subsequent chemical lability raises the question of whether CH3NH3PbI3 and its analogues are thermodynamically stable phases, thus posing a significant challenge to the development of transformative perovskite photovoltaics. Adequately addressing issues of structural and chemical stability under real-world operating conditions is paramount if perovskite solar cells are to make an impact beyond the benchtop. Expanding our fundamental knowledge of lead halide perovskite formation and degradation pathways can facilitate fabrication of stable, high-quality perovskite thin films for the next generation of photovoltaic and light emitting devices.

High-Purity Hybrid Organolead Halide Perovskite Nanoparticles Obtained by Pulsed-Laser Irradiation in Liquid.

Nanoparticles of hybrid organic-inorganic perovskites have attracted a great deal of attention due to their variety of optoelectronic properties, their low cost, and their easier integration into devices with complex geometry, compared with microcrystalline, thin-film, or bulk metal halides. Here we present a novel one-step synthesis of organolead bromide perovskite nanocrystals based on pulsed-laser irradiation in a liquid environment (PLIL). Starting from a bulk CH3 NH3 PbBr3 crystal, our PLIL procedure does not involve the use of high-boiling-point polar solvents or templating agents, and runs at room temperature. The resulting nanoparticles are characterized by high crystallinity and are completely free of any microscopic product or organic coating layer. We also demonstrate the straightforward inclusion of laser-generated perovskite nanocrystals in a polymeric matrix to form a nanocomposite with single- and two-photon luminescence properties.

Optical constants of CH3NH3PbBr3 perovskite thin films measured by spectroscopic ellipsometry.

The lack of optical constants information for hybrid perovskite of CH3NH3PbBr3 in thin films form can delay the progress of efficient LED or laser demonstration. Here, we report on the optical constants (complex refractive index and dielectric function) of CH3NH3PbBr3 perovskite thin films using spectroscopic ellipsometry. Due to the existence of voids, the refractive index of the thin films is around 8% less than the single crystals counterpart. The energy bandgap is around 2.309 eV as obtained from photoluminescence and spectrophotometry spectra, and calculated from the SE analysis. The precise measurement of optical constants will be useful in designing optical devices using CH3NH3PbBr3 thin films.

Asymmetric Π-Bridge Engineering Enables High-Permittivity Benzo[1,2-B:4,5-b']Difuran-Conjugated Polymer for Efficient Organic Solar Cells.

Organic solar cells (OSCs) exhibit complex charge dynamics, which are closely correlated with the dielectric constant (ɛr ) of photovoltaic materials. In this work, a series of novel conjugated copolymers based on benzo[1,2-b:4,5-b']difuran (BDF) and benzotriazole (BTz) is designed and synthesized, which differ by the nature of π-bridge from one another. The PBDF-TF-BTz with asymmetric furan and thiophene π-bridge demonstrates a larger ɛr of 4.22 than PBDF-dT-BTz with symmetric thiophene π-bridge (3.15) and PBDF-dF-BTz with symmetric furan π-bridge (3.90). The PBDF-TF-BTz also offers more favorable molecular packing and appropriate miscibility with non-fullerene acceptor Y6 than its counterparts. The corresponding PBDF-TF-BTz:Y6 OSCs display efficient exciton dissociation, fast charge transport and collection, and reduced charge recombination, eventually leading to a power conversion efficiency of 17.01%. When introducing a fullerene derivative (PCBO-12) as a third component, the PBDF-TF-BTz:Y6:PCBO-12 OSCs yield a remarkable FF of 80.11% with a high efficiency of 18.10%, the highest value among all reported BDF-polymer-based OSCs. This work provides an effective approach to developing high-permittivity photovoltaic materials, showcasing PBDF-TF-BTz as a promising polymer donor for constructing high-performance OSCs.

Reproducible high-quality perovskite single crystals by flux-regulated crystallization with a feedback loop.

Controlling the linear growth rate, a critical factor that determines crystal quality, has been a challenge in solution-grown single crystals due to complex crystallization kinetics influenced by multiple parameters. Here we introduce a flux-regulated crystallization (FRC) method to directly monitor and feedback-control the linear growth rate, circumventing the need to control individual growth conditions. When applied to metal halide perovskites, the FRC maintains a stable linear growth rate for over 40 h in synthesizing CH3NH3PbBr3 and CsPbBr3 single crystals, achieving outstanding crystallinity (quantified by a full width at half-maximum of 15.3 arcsec in the X-ray rocking curve) in a centimetre-scale single crystal. The FRC is a reliable platform for synthesizing high-quality crystals essential for commercialization and systematically exploring crystallization conditions, maintaining a key parameter-the linear growth rate-constant, which enables a comprehensive understanding of the impact of other influencing factors.

Homogeneous crystallization and buried interface passivation for perovskite tandem solar modules.

Scalable fabrication of all-perovskite tandem solar cells is challenging because the narrow-bandgap subcells made of mixed lead-tin (Pb-Sn) perovskite films suffer from nonuniform crystallization and inferior buried perovskite interfaces. We used a dopant from Good's list of biochemical buffers, aminoacetamide hydrochloride, to homogenize perovskite crystallization and used it to extend the processing window for blade-coating Pb-Sn perovskite films and to selectively passivate defects at the buried perovskite interface. The resulting all-perovskite tandem solar module exhibited a certified power conversion efficiency of 24.5% with an aperture area of 20.25 square centimeters.