A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives.

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

A comprehensive review on the influence of light on signaling cross-talk and molecular communication against phyto-microbiome interactions.

Generally, plant growth, development, and their productivity are mainly affected by their growth rate and also depend on environmental factors such as temperature, pH, humidity, and light. The interaction between plants and pathogens are highly specific. Such specificity is well characterized by plants and pathogenic microbes in the form of a molecular signature such as pattern-recognition receptors (PRRs) and microbes-associated molecular patterns (MAMPs), which in turn trigger systemic acquired immunity in plants. A number of Arabidopsis mutant collections are available to investigate molecular and physiological changes in plants under the presence of different light conditions. Over the past decade(s), several studies have been performed by selecting Arabidopsis thaliana under the influence of red, green, blue, far/far-red, and white light. However, only few phenotypic and molecular based studies represent the modulatory effects in plants under the influence of green and blue lights. Apart from this, red light (RL) actively participates in defense mechanisms against several pathogenic infections. This evolutionary pattern of light sensitizes the pathologist to analyze a series of events in plants during various stress conditions of the natural and/or the artificial environment. This review scrutinizes the literature where red, blue, white, and green light (GL) act as sensory systems that affects physiological parameters in plants. Generally, white and RL are responsible for regulating various defense mechanisms, but, GL also participates in this process with a robust impact! In addition to this, we also focus on the activation of signaling pathways (salicylic acid and jasmonic acid) and their influence on plant immune systems against phytopathogen(s).

Insights into diatom microalgal farming for treatment of wastewater and pretreatment of algal cells by ultrasonication for value creation.

Wastewater management and its treatment have revolutionized the industry sector into many innovative techniques. However, the cost of recycling via chemical treatment has major issues especially in economically poor sectors. On the offset, one of the most viable and economical techniques to clean wastewater is by growing microalgae in it. Since wastewater is rich in nitrates, phosphates and other trace elements, the environment is suitable for the growth of microalgae. On the other side, the cost of harvesting microalgae for its secondary metabolites is burgeoning. While simultaneously growing of microalgae in photobioreactors requires regular feeding of the nutrients and maintenance which increases the cost of operation and hence cost of its end products. The growth of microalgae in waste waters makes the process not only economical but they also manufacture more amounts of value added products. However, harvesting of these values added products is still a cumbersome task. On the offset, it has been observed that pretreating the microalgal biomass with ultrasonication allows easy oozing of the secondary metabolites like oil, proteins, carbohydrates and methane at much lower cost than that required for their extraction. Among microalgae diatoms are more robust and have immense crude oil and are rich in various value added products. However, due to their thick silica walls they do not ooze the metabolites until the mechanical force on their walls reaches certain threshold energy. In this review recycling of wastewater using microalgae and its pretreatment via ultrasonication with special reference to diatoms is critically discussed. Perspectives on circular bioeconomy and knowledge gaps for employing microalgae to recycle wastewater have been comprehensively narrated.

Phytoremediation of Heavy Metal-Contaminated Sites: Eco-environmental Concerns, Field Studies, Sustainability Issues, and Future Prospects.

Environmental contamination due to heavy metals (HMs) is of serious ecotoxicological concern worldwide because of their increasing use at industries. Due to non-biodegradable and persistent nature, HMs cause serious soil/water pollution and severe health hazards in living beings upon exposure. HMs can be genotoxic, carcinogenic, mutagenic, and teratogenic in nature even at low concentration. They may also act as endocrine disruptors and induce developmental as well as neurological disorders, and thus, their removal from our natural environment is crucial for the rehabilitation of contaminated sites. To cope with HM pollution, phytoremediation has emerged as a low-cost and eco-sustainable solution to conventional physicochemical cleanup methods that require high capital investment and labor alter soil properties and disturb soil microflora. Phytoremediation is a green technology wherein plants and associated microbes are used to remediate HM-contaminated sites to safeguard the environment and protect public health. Hence, in view of the above, the present paper aims to examine the feasibility of phytoremediation as a sustainable remediation technology for the management of metal-contaminated sites. Therefore, this paper provides an in-depth review on both the conventional and novel phytoremediation approaches; evaluates their efficacy to remove toxic metals from our natural environment; explores current scientific progresses, field experiences, and sustainability issues; and revises world over trends in phytoremediation research for its wider recognition and public acceptance as a sustainable remediation technology for the management of contaminated sites in the twenty-first century.

Silver nanoparticle probe for colorimetric detection of aminoglycoside antibiotics: picomolar-level sensitivity toward streptomycin in water, serum, and milk samples.

BACKGROUND: The low cost of aminoglycoside (AMG) antibiotics facilitates their excessive use in animal husbandry and the agriculture sector. This scenario has led to the occurrence of residues in the food chain. After several years of AMG use in antibacterial therapy, resistance to streptomycin has begun to appear. Most of the detection methods developed for AMG antibiotics lacks specificity. A broad target specific nanoprobe would be ideal for detecting the entire class of AMGs. A rapid and sensitive method for the detection of AMGs is urgently needed. RESULTS: Gallic acid-coated silver nanoparticles (AgNPs) were demonstrated as a nanoprobe for the colorimetric detection of AMGs (yellow to orange / red). A linear dynamic range of 50-650 pmol L-1 was achieved readily by ratiometric spectrophotometry (A560 /A400 ) with a limit of detection (LOD) as low as 36 pmol L-1 . The amine-groups of the AMGs function as molecular linkers, so that electrostatic coupling interactions between neighboring particles drive the formation of AgNP aggregates. The assay can also be applied for the determination of streptomycin residues in serum and milk samples. CONCLUSION: This study revealed the potential of an AgNP probe for the rapid and cost-effective detection of low-molecular-weight target analytes, such as the AMGs. A ligand-induced aggregation of AgNPs coated with gallic acid was reported to be a rapid and sensitive assay for AMGs. Analysis of streptomycin was demonstrated with excellent picomolar-level sensitivity. Thus, the validated method can find practical applications in the ultrasensitive detection of AMGs in complex and diagnostic settings. © 2019 Society of Chemical Industry.

Hydroxamic acid mediated heterogeneous Fenton-like catalysts for the efficient removal of Acid Red 88, textile wastewater and their phytotoxicity studies.

Heterogeneous Fenton-like catalyst and its industrial application are increasingly given importance for its non-selective mineralization of organic pollutants in broad pH range. Current study, utilized an aromatic hydroxamic acid derivative 2-hydroxypyridine-N-oxide (HpO), for the construction of iron-Hpo ligand catalyst supported on granular activated carbon (GAC). 8-Hydroxyquinoline and citric acid as non-hydroxamic aromatic and aliphatic Fenton-like catalysts were used for comparative evaluation of the efficiency with targeted catalyst (iron-HpO-GAC). This novel catalyst iron-HpO-GAC exhibits excellent efficiency in Acid Red 88 dye removal in the presence of hydrogen peroxide as oxidant at acidic, basic as well as at neutral conditions. Operational conditions for the catalytic oxidation including temperature, dye concentration, pH and catalyst dosage were systematically investigated and analyzed through kinetic studies. Thermodynamic analysis of the catalytic dye removal revealed that the system could oxidize pollutants faster with less activation energy requirement. Higher level of recyclability and stability of the catalyst with less iron leaching was achieved. Finally, the real time application of the catalyst was investigated through successful repeated treatment for actual industrial wastewater. The phytotoxicity assay (with respect to plant Phaseolus mungo) revealed that the degradation of Acid Red 88 and dye wastewater produced nontoxic metabolites which increases its potential application. This study emphasizes the viability of hydroxamate mediated efficient Fenton-like oxidation as a novel approach in designing economically viable pollutant removal technology.

Whey peptide-encapsulated silver nanoparticles as a colorimetric and spectrophotometric probe for palladium(II).

Silver nanoparticles (AgNPs) coated with whey peptides are shown to be a useful optical nanoprobe for the highly sensitive determination of Pd(II). The peptidic surface of the AgNPs works as a molecular receptor for the rapid detection of Pd(II) via a color change from dark yellow to orange/red along with a spectral red-shift with a gap about 120 nm. The effect is caused by the formation of a coordination complex between Pd(II) and the peptide ligands. This results in the aggregation of AgNPs and an absorbance spectral shift from 410 to 530 nm. The absorbance response is linear in the range 0.1 to 1.3 µM Pd(II) with a low detection limit of 115 nM. The nanoprobe responds within a few minutes and is not interfered by other metal ions except for Mg(II). The probe potentially can be applied to the determination of Pd(II) contamination in the products of Pd(II)-catalyzed organic reactions and in pharmaceutical settings. Graphical abstractSchematic representation of the nanoprobe for Pd(II). (a) Synthesis of whey peptide-coated silver nanoparticles (AgNPs), (b) the nanoprobe design for Pd(II) detection, (c) HR-TEM imaging and elemental mapping, (d) quantitative determination of Pd(II) (Inset shows colorimetric results).

Feasibility analysis of homogenizer coupled solar photo Fenton process for waste activated sludge reduction.

In this study, an attempt has been made to reduce the sludge using novel homogenizer coupled solar photo Fenton (HPF) process. At an optimum pH of 3 and Fe2+ to H2O2 dosage of 1:6, PF process yielded 63.7% solids reduction at a time interval of 45 min. Coupling of homogenizers with photo Fenton (PF) process effectively enhanced treatment efficiency. When homogenizer (specific energy - 1150.694 kJ/kg TS) was coupled with PF, a sharp increase in solid reduction 73.5% and decrease in reaction time (20 min) were observed. Cost benefit analysis revealed the efficiency of HPF process and achieved a net cost of 15.59 USD whereas PF achieved a negative net cost of -82.69 USD. Based on the above study it can be concluded that coupling of homogenizers with PF not only increased its efficiency but also make it field applicable.

Degradation and decolourization potential of an ligninolytic enzyme producing Aeromonas hydrophila for crystal violet dye and its phytotoxicity evaluation.

This study deals the biodegradation of crystal violet dye by a ligninolytic enzyme producing bacterium isolated from textile wastewater that was characterized and identified as Aeromonas hydrophila based on the 16 S rRNA gene sequence analysis. The degradation of crystal violet dye was studied under different environmental and nutritional conditions, and results showed that the isolated bacterium was effective to decolourize 99% crystal violet dye at pH 7 and temperature 35 °C in presence of sucrose and yeast extract as C and N source, respectively. This bacterium also produced lignin peroxidase and laccase enzyme, which were characterized by the SDS-PAGE analysis and found to have the molecular weight of ~ 40 and ~ 60 kDa, respectively. Further, the GC-MS analysis showed that CV dye was biotransformed into phenol, 2, 6-bis (1,1-dimethylethyl), 2',6'-dihydroxyacetophenone and benzene by the isolated bacterium and the toxicity of CV dye was reduced upto a significant level as it showed 60%, 56.67% and 46.67% inhibition in seed germination. But, after the bacterial degradation/decolourization, it showed only 43.33%, 36.67% and 16.67% inhibition in seed germination after 24, 48 and 72 h, respectively. Thus, this study concluded that the isolated bacterium has high potential for the degradation/decolourization of CV dye as well to reduce its toxicity upto a significant level.

Enhancing biomethanation from dairy waste activated biomass using a novel EGTA mediated microwave disintegration.

A novel approach to explore the impact of calcium specific chelant - Ethylene glycol tetra acetic acid (EGTA) on deflocculation followed by biomass disintegration using microwave (MW) was investigated. In the first phase of the study, the EGTA dosage of 0.012 g/g suspended solids (SS) was found to be optimal for disassociating the biomass. Subsequent disintegration of biomass in microwave (EGTA-MW) yielded a biomass lysis and solids reduction of about 39.7% and 30.5%. EGTA-MW disintegration reduces the amount of specific energy required to disintegrate the biomass from 18,900 kJ/kg TS to 13,500 kJ/kg TS, when compared to control. The impact of EGTA-MW disintegration on anaerobic digestion was also evident from its methane yield (235.3 mL/g VS) which was 36.2% higher than control. An economic assessment of this study provides a net profit of 8.48 €/ton in EGTA-MW and highly endorsed for biomass disintegration.

Photocatalytic activity of CuO/Cu(OH)2 nanostructures in the degradation of Reactive Green 19A and textile effluent, phytotoxicity studies and their biogenic properties (antibacterial and anticancer).

In this study, CuO/Cu(OH)2 (denoted as CuONs) nanostructures were synthesized relying to a cheap and rapid chemical co-precipitation method using copper sulfate and liquid ammonia as precursors. Results obtained from X-ray diffraction, and field emission scanning electron microscopy analysis revealed the crystalline nature of synthesized CuONs. Fourier transform infrared spectroscopy and energy dispersive spectroscopy studies showed interactions between copper and oxygen atoms. Synthesized CuONs showed the size in the range of 20-30 nm using high resolution transmission electron microscopy analysis. The photocatalytic degradation performance of Reactive Green 19A (RG19A) dye using CuONs was evaluated. The results showed that CuONs exhibited 98% degradation efficiency after 12 h and also complete mineralization in form of reducing chemical oxygen demand (COD) (84%) and total organic carbon (TOC) (80%). The nanocatalyst was recovered from the dye containing solution and its catalytic activity can be reused up to four times efficiently. CuONs was also able to decolorize actual textile effluent (80% in terms of the American Dye Manufacturers' Institute (ADMI) value) with significant reductions in COD (72%) and TOC (69%). Phytotoxicity studies revealed that the degradation products of RG19A and textile effluent were scarcely toxic in nature, thereby increasing the applicability of CuONs for the treatment of textile wastewater. Additionally, the CuONs showed a maximum antibacterial effect against human pathogens which also displayed synergistic antibacterial potential related to commercial antibiotics. Moreover, CuONs displayed strong antioxidant activity in terms of ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (IC50: 51 µg/mL) and DPPH (1,1-diphenyl-2-picrylhydrazyl) (IC50: 60 µg/mL) radical scavenging. The CuONs exhibited dose dependent response against tumor rat C6 cell line (IC50: 60 µg/mL) and may serve as anticancer agents.

Synthesis of nano-cuboidal gold particles for effective antimicrobial property against clinical human pathogens.

Algae could offer a potential source of fine chemicals, pharmaceuticals and biofuels. In this study, a green synthesis of dispersed cuboidal gold nanoparticles (AuNPs) was achieved using red algae, Gelidium amansii reacted with HAuCl4. It was found to be 4-7 nm sized cubical nanoparticles with aspect ratio of 1.4 were synthesized using 0.5 mM of HAuCl4 by HRSEM analysis. The crystalline planes (111), (200), (220), (311) and elemental signal of gold was observed by XRD and EDS respectively. The major constitutes, galactose and 3,6-anhydrogalactose in the alga played a critical role in the synthesis of crystalline AuNPs with cubical dimension. Further, the antibacterial potential of synthesized AuNPs was tested against human pathogens, Escherichia coli and Staphylococcus aureus. The synthesized AuNPs found biocompatible up to 100 ppm and high concentration showed an inhibition against cancer cell. This novel report could be helped to exploration of bioresources to material synthesis for the application of biosensor and biomedical application.

Treatment of industrial wastewaters by algae-bacterial consortium with Bio-H2 production: Recent updates, challenges and future prospects.

Currently, scarcity/security of clean water and energy resources are the most serious problems worldwide. Industries use large volume of ground water and a variety of chemicals to manufacture the products and discharge large volume of wastewater into environment, which causes severe impacts on environment and public health. Fossil fuels are considered as major energy resources for electricity and transportation sectors, which release large amount of CO2 and micro/macro pollutants, leading to cause the global warming and public health hazards. Therefore, algae-bacterial consortium (A-BC) may be eco-friendly, cost-effective and sustainable alternative way to treat the industrial wastewaters (IWWs) with Bio-H2 production. A-BC has potential to reduce the global warming and eutrophication. It also protects environment and public health as it converts toxic IWWs into non or less toxic (biomass). It also reduces 94%, 90% and 50% input costs of nutrients, freshwater and energy, respectively during IWWs treatment and Bio-H2 production. Most importantly, it produce sustainable alternative (Bio-H2) to replace use of fossil fuels and fill the world's energy demand in eco-friendly manner. Thus, this review paper provides a detailed knowledge on industrial wastewaters, their pollutants and toxic effects on water/soil/plant/humans and animals. It also provides an overview on A-BC, IWWs treatment, Bio-H2 production, fermentation process and its enhancement methods. Further, various molecular and analytical techniques are also discussed to characterize the A-BC structure, interactions, metabolites and Bio-H2 yield. The significance of A-BC, recent update, challenges and future prospects are also discussed.

Emerging trends in the pretreatment of microalgal biomass and recovery of value-added products: A review.

Microalgae are a promising source of raw material (i.e., proteins, carbohydrates, lipids, pigments, and micronutrients) for various value-added products and act as a carbon sink for atmospheric CO2. The rigidity of the microalgal cell wall makes it difficult to extract different cellular components for its applications, including biofuel production, food and feed supplements, and pharmaceuticals. To improve the recovery of products from microalgae, pretreatment strategies such as biological, physical, chemical, and combined methods have been explored to improve whole-cell disruption and product recovery efficiency. However, the diversity and uniqueness of the microalgal cell wall make the pretreatment process more species-specific and limit its large-scale application. Therefore, advancing the currently available technologies is required from an economic, technological, and environmental perspective. Thus, this paper provides a state-of-art review of the current trends, challenges, and prospects of sustainable microalgal pretreatment technologies from a microalgae-based biorefinery concept.

Microalgae: A green eco-friendly agents for bioremediation of tannery wastewater with simultaneous production of value-added products.

Tannery wastewater (TWW) has high BOD, COD, TS and variety of pollutants like chromium, formaldehydes, biocides, oils, chlorophenols, detergents and phthalates etc. Besides these pollutants, TWW also rich source of nutrients like nitrogen, phosphorus, carbon and sulphur etc. that can be utilized by microalgae during their growth. Direct disposal of TWW into the environment may lead severe environmental and health threats, therefore it needs to be treated adequately. Microalgae are considered as an efficient microorganisms (fast growing, adaptability and strain robustness, high surface to volume ratio, energy saving) for remediation of wastewaters with simultaneous biomass recovery and generation of value-added products (VAPs) such as biofuels, biohydrogen, biopolymer, biofertilizer, pigments, bioethanol, bioactive compounds, nutraceutical etc. Most microalgae are photosynthetic and use CO2 and light energy to synthesise carbohydrate and reduces the emission of greenhouse gasses. Microalgae are also reported to remove heavy metals and antibiotics from wastewaters by bioaccumulation, biodegradation and biosorption. Microalgal treatment can be an alternative of conventional processes with generation of VAPs. The use of biotechnology in wastewater remediation with simultaneous generation of VAPs is trending. The validation of economic viability and environmental sustainability, life cycle assessment studies and techno-economic analysis is undergoing. Thus, in this review, the characteristics of TWW and microalgae are summarized, which manifest microalgae as potential candidates for wastewater remediation with simultaneous production of VAPs. Further, the treatment mechanisms, various factors (physical, chemical, mechanical and biological etc.) affecting treatment efficiency as well as challenges associated with microalgal remediation are also discussed.

Removal of pentachlorophenol and phenanthrene from lignocellulosic biorefinery wastewater by a biocatalytic/biosurfactant system comprising cross-linked laccase aggregates and rhamnolipid.

Synthesis and characterization of highly active cross-linked laccase aggregates (CLLAs) were performed and evaluated for removal of pentachlorophenol and phenanthrene from lignocellulosic biorefinery wastewater. Laccase from Tramates versicolor MTCC 138 was insolubilized as CLLAs via precipitation with 70% ammonium sulphate and simultaneous cross-linking with 5 mM glutaraldehyde to obtain activity recovery of 89.1%. Compared to the free laccase, the pH and thermal stability of the prepared CLLAs were significantly higher. At a high temperature of 60 °C, free laccase had a half-life of 0.25 h, while CLLAs had a half-life of 6.2 h. In biorefinery wastewater (pH 7.0), the free and CLLAs were stored for 3 day at a temperature of 30 °C. Free laccase completely lost their initial activity after 60 h; however, the CLLAs retained 39% activity till 72 h. Due to its excellent stability, free laccase and CLLAs were assessed for removing pentachlorophenol and phenanthrene in wastewater. CLLAs could remove 51-58% of pentachlorophenol (PCP) and phenanthrene (PHE) in 24 h. Biosurfactants, including surfactin, sophorolipid, and rhamnolipid, were assessed for their aptitude to improve the removal of organic contaminants in wastewater. Biorefinery wastewater incubated with all surfactants enhanced PCP and PHE removal compared to the no-surfactant controls. Further, 1 µM rhamnolipid significantly amplified pentachlorophenol and phenanthrene removal to 81-93% for free laccase and CLLAs, respectively.

Various strategies applied for the removal of emerging micropollutant sulfamethazine: a systematic review.

Pharmaceutical active drug(s) especially sulfamethazine (SMZ) is considered as one of the major emerging microcontaminants due its long-term existence in the environmental system and that can influence on the developmental of antibacterial resistance genes. Because of this region it has a great concern in the aquatic system. Moreover, the vast utilization of SMZ, excretion of undigested portion by animals and also through dumping or mishandling, SMZ is frequently detected in various samples (including water) of different places and its surroundings. Additionally, reports shown it has toxic effect against microalgae and mice. Thus, that can lead to several investigators, focusing on removal of SMZ alone or in combination of other drugs in wastewater treatment plants (WWTPs) either by abiotic and/or biotic treatment methods. The present review provides an overview of the toxic effect of SMZ and SMZ degradation/removal in abiotic and biotic processes. Finally, reveals the need of further implication of integrated treatments (including engineered biological mediators) to understand ideal biological approaches for the mineralization of SMZ.

Development of a simple biogas analyzer module (BAM) for real-time biogas production monitoring.

ABSTRACTAnaerobic digestion (AD) relies on the cooperation of specific microbial communities, making it susceptible to process disruptions that could impact biogas production. In this regard, this study presents a technological solution based on the Arduino platform, in the form of a simple online monitoring system that can track the produced biogas profile, named as biogas analyzer module (BAM). The applicability of the BAM focused on monitoring the biogas produced from sugarcane vinasse inoculated with sewage sludge biodigestion processed in mesophilic conditions (38 oC), in a pH range of 6.5-7.5, and following a three-stage operational model: (i) an adaptation (168 h), (ii) complete mixing (168 h), and (iii) bio-stimulation with glycerol (192 h). Then, the lab-made BAM was used to trace the produced biogas profile, which registered a total biogas volume of 8,719.86 cm3 and biomethane concentration of 95.79% (vol.), removing 90.8% (vol) of carbon dioxide (CO2) and 65.2% (vol) of hydrogen sulfide (H2S). In conclusion, the results ensured good accuracy and efficiency to the device created by comparisons with established standards (chromatographic and colorimetric methods), as well as the cost reduction. The developed device would likely be six times cheaper than what is available in the market.

Green chemical and hybrid enzymatic pretreatments for lignocellulosic biorefineries: Mechanism and challenges.

The greener chemical and enzymatic pretreatments for lignocellulosic biomasses are portraying a crucial role owing to their recalcitrant nature. Traditional pretreatments lead to partial degradation of lignin and hemicellulose moieties from the pretreated biomass. But it still restricts the enzyme accessibility for the digestibility towards the celluloses and the interaction of lignin-enzymes, nonproductively. Moreover, incursion of certain special chemical treatments and other lignin sulfonation techniques to the enzymatic pretreatment (hybrid enzymatic pretreatment) enhances the lignin structural modification, solubilization of the hemicelluloses and both saccharification and fermentation processes (SAF). This article concentrates on recent developments in various chemical and hybrid enzymatic pretreatments on biomass materials with their mode of activities. Furthermore, the issues on strategies of the existing pretreatments towards their industrial applications are highlighted, which could lead to innovative ideas to overcome the challenges and give guideline for the researchers towards the lignocellulosic biorefineries.

Microbial fuel cell: A green eco-friendly agent for tannery wastewater treatment and simultaneous bioelectricity/power generation.

This review paper emphasised on the origin of hexavalent chromium toxicity in tannery wastewater and its remediation using novel Microbial Fuel Cell (MFC) technology, including electroactive bacteria, which are known as exoelectrogens, to simultaneously treat wastewater and its action in the production of bioenergy and the mechanism of Cr6+ reduction. Also, there are various parameters like electrode, pH, mode of operation, time of operation, and type of exchange membrane used for promising results shown in enhancing MFC production and remediation of Cr6+. Destructive anthropological activities, such as leather making and electroplating industries are key sources of hexavalent chromium contamination in aquatic repositories. When Cr6+ enters the food chain and enters the human body, it has the potential to cause cancer. MFC is a green innovation that generates energy economically through the reduction of toxic Cr6+ to less toxic Cr3+. The organic substrates utilized at the anode of MFC act as electrons (e-) donors. This review also highlighted the utilization of cheap substrates to make MFCs more economically suitable and the energy production at minimum cost.