Combined 'moth-eye' structured and graded index-layer anti-reflecting coating for high index glasses.

We present a hybrid antireflective coating (ARC) providing a complete continuous graded refractive index (GRIN) transition from a high-index substrate down to ambient air. The ARC comprises a first GRIN layer of dense silicon-oxy-nitride with a varying, height adjusted material composition. Secondly, a layer of quasi-periodic nanopillars imitating AR-"moth-eye structure" is added to the dense GRIN layer. Demonstrated on a high index glass with a refractive index of ne=1.73 the hybrid GRIN-ARC is applicable to a broad material selection and allows to eliminate any step-like transition up to a refractive index of the substrate of ∼2.0. The ARC offers antireflective properties for large incidence angles and over an extremely broad spectrum ranging from 400 nm up to 2.5 µm. Compared to the sole substrate, the hybrid GRIN-ARC results in an increase of transmittance of more than 10% in the maximum, and more than 6% in the peripheral regions of the spectrum.

Plasma deposition of silver nanoparticles on ultrafiltration membranes: antibacterial and anti-biofouling properties.

A novel and versatile plasma reactor was used to modify Polyethersulphone commercial membranes. The equipment was applied to: i) functionalize the membranes with low-temperature plasmas, ii) deposit a film of poly(methyl methacrylate) (PMMA) by Plasma Enhanced Chemical Vapor Deposition (PECVD) and, iii) deposit silver nanoparticles (SNP) by Gas Flow Sputtering. Each modification process was performed in the same reactor consecutively, without exposure of the membranes to atmospheric air. Scanning electron microscopy and transmission electron microscopy were used to characterize the particles and modified membranes. SNP are evenly distributed on the membrane surface. Particle fixation and transport inside membranes were assessed before- and after-washing assays by X-ray photoelectron spectroscopy depth profiling analysis. PMMA addition improved SNP fixation. Plasma-treated membranes showed higher hydrophilicity. Anti-biofouling activity was successfully achieved against Gram-positive (Enterococcus faecalis) and -negative (Salmonella Typhimurium) bacteria. Therefore, disinfection by ultrafiltration showed substantial resistance to biofouling. The post-synthesis functionalization process developed provides a more efficient fabrication route for anti-biofouling and anti-bacterial membranes used in the water treatment field. To the best of our knowledge, this is the first report of a gas phase condensation process combined with a PECVD procedure in order to deposit SNP on commercial membranes to inhibit biofouling formation.