An Automated SeaFAST ICP-DRC-MS Method for the Determination of 90Sr in Spent Nuclear Fuel Leachates.

To reduce uncertainties in determining the source term and evolving condition of spent nuclear fuel is fundamental to the safety assessment. ß-emitting nuclides pose a challenging task for reliable, quantitative determination because both radiometric and mass spectrometric methodologies require prior chemical purification for the removal of interfering activity and isobars, respectively. A method for the determination of 90Sr at trace levels in nuclear spent fuel leachate samples without sophisticated and time-consuming procedures has been established. The analytical approach uses a commercially available automated pre-concentration device (SeaFAST) coupled to an ICP-DRC-MS. The method shows good performances with regard to reproducibility, precision, and LOD reducing the total time of analysis for each sample to 12.5 min. The comparison between the developed method and the classical radiochemical method shows a good agreement when taking into account the associated uncertainties.

Reducing uncertainties affecting the assessment of the long-term corrosion behavior of spent nuclear fuel.

Reducing the uncertainties associated with extrapolation to very long term of corrosion data obtainable from laboratory tests on a relatively young spent nuclear fuel is a formidable challenge. In a geologic repository, spent nuclear fuel may come in contact with water tens or hundreds of thousands of years after repository closure. The corrosion behavior will depend on the fuel properties and on the conditions characterizing the near field surrounding the spent fuel at the time of water contact. This paper summarizes the main conclusions drawn from multiyear experimental campaigns performed at JRC-ITU to study corrosion behavior and radionuclide release from spent light water reactor fuel. The radionuclide release from the central region of a fuel pellet is higher than that from the radial periphery, in spite of the higher burnup and the corresponding structural modifications occurring at the pellet rim during irradiation. Studies on the extent and time boundaries of the radiolytic enhancement of the spent fuel corrosion rate indicate that after tens or hundreds of thousands of years have elapsed, very small or no contribution to the enhanced corrosion rate has to be expected from α radiolysis. A beneficial effect inhibiting spent fuel corrosion due to the hydrogen overpressure generated in the near field by iron corrosion is confirmed. The results obtained so far point toward a benign picture describing spent fuel corrosion in a deep geologic repository. More work is ongoing to further reduce uncertainties and to obtain a full description of the expected corrosion behavior of spent fuel.