RESUMO
Capillary electrophoresis with sodium dodecyl sulfate (CE-SDS) is a common analytical technique for investigating the purity and molecular size heterogeneity of monoclonal antibody (mAb) drugs. In reducing CE-SDS analysis of mAb-A, the light chain (LC) peak exhibited severe tailing, seriously affecting the purity analysis. The purposes of this investigation are to clarify the source of tailing and develop a more appropriate CE-SDS method to eliminate LC tailing. The degree of LC tailing was closely related to the mAb concentration, SDS concentration, and injection amount, and more hydrophobic detergents, such as sodium hexadecyl sulfate (SHS) and sodium tetradecyl sulfate (STS), could be used instead of SDS to obtain better peak shapes. The results also indicated that the tailing was caused by the binding problem associated with SDS, and SHS/STS could provide a more stable and uniform complexation for the LC. In summary, the method we developed successfully eliminated the LC tailing and provided a robust characterization of mAb-A in reducing CE-SDS analysis.
Assuntos
Anticorpos Monoclonais , Tetradecilsulfato de Sódio , Anticorpos Monoclonais/análise , Detergentes , Eletroforese Capilar/métodos , Sódio , Dodecilsulfato de Sódio/química , SulfatosRESUMO
This manuscript describes the formation of an artifact shoulder peak with a slightly larger retention time than the main peak under the standard non-reduced capillary electrophoresis with sodium dodecyl sulfate (nrCE-SDS) analysis of a therapeutic recombinant protein X, and clarifies the formation mechanism of the artifact caused by N-ethylmaleimide (NEM) during the sample preparation procedure. A design of experiment (DoE) approach was used to investigate the impact of the factors on the formation of the impurity. Additionally, orthogonal analytical experiments were performed to study the root cause of this phenomenon. The results consistently suggested that the Michael addition reaction between NEM and lysine residues in protein X, and decreased electrophoretic mobility due to increased molecular weight, was the root cause for the artifact, which could be partially inhibited by modifications of incubation conditions. Thus, before performing the nrCE-SDS method, the effects of alkylation reagents and sample preparation procedure on analytical results need to be considered seriously.
Assuntos
Artefatos , Eletroforese Capilar , Alquilação , Eletroforese Capilar/métodos , Eletroforese em Gel de Poliacrilamida , Etilmaleimida , Indicadores e Reagentes , Dodecilsulfato de Sódio/químicaRESUMO
PURPOSES: The primary objectives of this study were to investigate the degradation mechanisms of freeze-dried monoclonal antibody (mAb) formulations under mechanical grinding, assess the sensitivity and suitability of various particle analysis techniques, analyze the structure of the collected subvisible particles (SbVPs), and analyze the antioxidant mechanism of methionine (Met) under degradation process to gain a thorough understanding of the phenomenon. METHODS: The freeze-dried mAb-X formulations underwent grinding, and the resultant SbVPs were characterized through visual inspection, flow imaging microscopy, dynamic light scattering, ultraviolet-visible spectroscopy, and size-exclusion high-performance liquid chromatography. We further evaluated the effect of different temperatures and the free radical scavenger Met on SbVP formation. The produced free radicals were detected using electron paramagnetic resonance, and Met S-oxide formation was detected using liquid chromatography-mass spectrometry. In addition, we analyzed the obtained SbVPs using capillary electrophoresis sodium dodecyl sulfate and Fourier transform infrared spectroscopy. RESULTS: Grinding leads to SbVP formation under high temperature and free radical formation. Free radicals produced during grinding require the participation of a macromolecule. Met could then bind to the produced free radicals, thus partially protecting mAb-X from degradation while itself undergoing oxidation to form Met(O). Sensitivity differences between different particle analysis techniques were evaluated, and the obtained SbVPs showed significant changes in secondary structure and the formation of covalent aggregates and fragments. CONCLUSIONS: Met plays the role of an antioxidant in protecting macromolecules by quenching the free radicals produced during grinding. To thoroughly characterize SbVPs, multiple and orthogonal particle analysis techniques should be used, and if necessary, SbVPs should be processed by enrichment to accurately analyze primary and high order structures.
Assuntos
Anticorpos Monoclonais/química , Sequestradores de Radicais Livres/química , Radicais Livres/metabolismo , Liofilização , Metionina/química , Composição de Medicamentos , Estabilidade de Medicamentos , Estabilidade Proteica , Fatores de TempoRESUMO
PURPOSES: In reducing capillary electrophoresis sodium dodecyl sulfate (CE-SDS) analysis of a monoclonal antibody (mAb-1), the peak area ratio of heavy chain (HC) to light chain (LC) was out of balance, while multiple artifact peaks were observed following the migration of HC. The main purposes of this study were to describe the techniques utilized to eliminate this artifact and clarify the root cause for this interesting phenomenon. METHODS: We optimized the CE-SDS analysis of mAb-1 by a vairety of techniques including changing the concentration of protein or replacing SDS with a more hydrophobic surfactant (i.e., sodium hexadecyl sulfate (SHS) or sodium tetradecyl sulfate (STS) instead of SDS) in sample and/or the sieving gel buffer. Dynamic light scattering (DLS) and reversed phase high-performance liquid chromatography (RP-HPLC) were used to study the protein-surfactant complex. RESULTS: The artifact could be partially mitigated by reducing the protein concentration and replacing SDS with SHS or STS in the sample and/or the sieving gel buffer solutions. Due to replacing a more hydrophobic surfactant, the HC-surfactant complex formed was more resistant to dissociation, preventing additional hydrophobic HC-HC interaction and aggregation, thus eliminating the artifact problem. CONCLUSIONS: DLS and RP-HPLC are powerful supplementary techniques in characterizing the protein-surfactant complex, and hydrophobic surfactants such as SHS and STS could afford more normal electropherograms during the analysis of mAbs.
Assuntos
Anticorpos Monoclonais , Artefatos , Anticorpos Monoclonais/química , Cromatografia Líquida de Alta Pressão/métodos , Difusão Dinâmica da Luz , Eletroforese Capilar/métodos , Dodecilsulfato de Sódio/química , TensoativosRESUMO
PURPOSES: The main purposes of this article are to describe an unprecedented phenomenon in which significant amount of a shoulder peak impurity was observed during normal non-reducing capillary electrophoresis-sodium dodecyl sulfate (CE-SDS) analysis of a recombinant fusion protein X, and to evaluate the root cause for this phenomenon. METHODS: A series of experiments were conducted to study the nature of this degradation. Effects of iodoacetamide (IAM), heating temperature, duration, and SDS on the formation of this specific impurity were evaluated using a variety of characterization techniques. RESULTS: The formation of the impurity as observed in CE-SDS was actually due to alkylation of lysine and serine residues with IAM, as confirmed by peptide mapping and LC-MS/MS, which increased the molecular weight and therefore decreased the electrophoretic mobility. The amount of impurity was also strongly dependent on sample preparation conditions including the presence or absence of SDS. CONCLUSIONS: Our study clearly suggested that even though IAM has been used extensively as an alkylation reagent in the traditional non-reducing CE-SDS analysis of monoclonal antibodies and other proteins, alkylation with IAM could potentially lead to additional impurity peak, and therefore complicating analysis. Therefore, before performing CE-SDS and other analyses, the effects of sample preparation procedures on analytical results must be evaluated. For protein X, IAM should be excluded for CE-SDS analysis.
Assuntos
Proteínas Recombinantes/química , Dodecilsulfato de Sódio/química , Anticorpos Monoclonais/química , Cromatografia Líquida/métodos , Eletroforese Capilar/métodos , Eletroforese em Gel de Poliacrilamida/métodos , Espectrometria de Massas em Tandem/métodosRESUMO
PURPOSE: The main purposes of this manuscript are to report a surprising and interesting degradation reaction of glucagon from a specific vendor in which glucagon underwent cleavage among several peptide bonds quickly under near neutral to basic conditions, and to propose the root cause of mechanism for the degradation reaction. METHODS: The degradation reaction was monitored by HPLC and the fragment structures were confirmed by LC-MS. Possible impurities responsible for the degradation were either confirmed or excluded by a variety of techniques such as addition of chelator EDTA and transitional metal ions or separation by ultrafiltration. RESULTS: This type of degradation was rarely reported in literature, especially considering its extreme cleavage efficiency. Contamination by a thermostable high molecular impurity (such as a peptidase with molecular weight between 10 and 30 KDa) during the manufacturing process was the main reason for this interesting phenomenon. CONCLUSIONS: The degradation phenomenon described here could be used as an excellent example showing that products ordered from vendors meeting the rudimentary quality standards might contain impurities which could cause significant degradation. We suggest that a simple solution, i.e. additional tests of stability under real or accelerated conditions by manufacturers and inclusion of the "accelerated stability criteria" in the Certificate of Analysis (CoAs), especially for sensitive biological reagents prone to faster degradation, would be very helpful for avoiding losses for both vendors and users.
Assuntos
Glucagon/química , Quelantes/química , Cromatografia Líquida de Alta Pressão , Contaminação de Medicamentos , Estabilidade de Medicamentos , Ácido Edético/química , Concentração de Íons de Hidrogênio , Hidrólise , Peptídeo Hidrolases/química , Estabilidade Proteica , Espectrometria de Massas em Tandem , Elementos de Transição/química , UltrafiltraçãoRESUMO
Capillary electrophoresis with sodium dodecyl sulfate (CE-SDS) has long been proven to have excellent performance in the analysis and characterization of therapeutic proteins. However, it is rarely used for the detection of low-molecular-weight proteins or peptides. Our research has proved the ability of CE-SDS to characterize the purity of low-molecular-weight proteins (i.e., <10 kDa) and even polypeptides. In this article, insulin glargine was used as a model protein, and CE-SDS was used to analyze the samples damaged by heating and light exposure. The monomers, dimers, and trimers of insulin glargine were effectively separated, and the results of the mass spectrometry also confirmed the existence of two kinds of insulin aggregates. For comparison, the size-exclusion high-performance liquid chromatography (SE-HPLC) only showed a single aggregate peak. In addition, the denaturation conditions caused only the covalent aggregates to appear in the CE-SDS analysis. These advantages also make CE-SDS an excellent supplementary technology to the traditional SE-HPLC, providing biopharmaceutical analysts with more information.
Assuntos
Eletroforese Capilar , Agregados Proteicos , Dodecilsulfato de Sódio/química , Cromatografia Líquida de Alta Pressão/métodos , Insulina Glargina , Eletroforese Capilar/métodosRESUMO
Biopharmaceuticals are formulated using a variety of excipients to maintain their storage stability. However, some excipients are prone to degradation during repeated use and/or improper storage, and the impurities generated by their degradation are easily overlooked by end users and are usually not strictly monitored, affecting the stability of biopharmaceuticals. In this study, we evaluated the degradation profile of polyol excipient glycerol during repeated use and improper storage and identified an unprecedented cyclic ketal impurity using gas chromatography with mass spectrometry (GC-MS). The other polyol excipient, mannitol, was much more stable than glycerol. The effects of degraded glycerol and mannitol on the stability of the model biopharmaceutical pentapeptide, thymopentin, were also evaluated. The thymopentin content was only 66.4% in the thymopentin formulations with degraded glycerol, compared to 95.8% in other formulations after the stress test. Most glycerol impurities (i.e., aldehydes and ketones) reacted with thymopentin, affecting the stability of thymopentin formulations. In conclusion, this work suggests that more attention should be paid to the quality changes of excipients during repeated use and storage. Additional testing of excipient stability under real or accelerated conditions by manufacturers would help avoid unexpected and painful results.
RESUMO
Dropping during shipping and handling of liquid biopharmaceutical formulations has long been known to cause protein degradation and aggregation. On the other hand, accidental dropping of freeze-dried protein formulations is generally considered not a major issue for biopharmaceutical quality. Reports of stability and especially the underling degradation mechanism(s) during shipping and handling of freeze-dried protein formulations were rarely seen in literature. In this manuscript, we report an interesting phenomenon in which repeated dropping of freeze-dried monoclonal antibody X (mAb-X) formulation powder resulted in significant protein sub-visible particles (SbVPs) in the reconstituted liquid as determined by the sensitive particle analyzing technique micro-flow imaging (MFI). Free radicals were observed after repeated dropping by electron paramagnetic resonance (EPR). Formation of SbVPs could be partially inhibited by the free radical scavengers methionine and 3-carbamoyl-2,2,5,5-tetramethyl-1-pyrrolidin-yloxy free radical (CTPO). The amount of free radicals and SbVPs was correlated to the sample temperature during dropping. Therefore we propose that the high temperature formed during dropping was probably the root cause for protein aggregation and free radical formation, which could further cause protein aggregation. Our observations suggest that similar to liquid protein formulations, dropping of freeze-dried protein formulations should also be avoided or mitigated.
Assuntos
Anticorpos Monoclonais , Química Farmacêutica , Estabilidade de Medicamentos , Radicais Livres , LiofilizaçãoRESUMO
Bemisia tabaci (Gennadius) Middle East-Asia Minor 1 (MEAM1) is a well known invasive insect species. Little information is available on immune system of B. tabaci to date. In this study, one of the Toll-like receptors (TLR; namely BtToll) was cloned in MEAM1 B. tabaci which contains an open reading frame of 3153bp, encoding putative 1050 amino acids. Phylogenetic analysis indicated that BtToll is highly identitical with other members of the TLR family. Transcripts of BtToll detected through qRT-PCR were expressed in all developmental stages of B. tabaci and the highest expression level was observed in the 3rd nymphal instar. BtToll was highly expressed in response to immune challenge. RNA interference was used to knockdown the BtToll expression in adults through the oral route which resulted in significant reduction of BtToll transcript. When the adults were challenged with a mycotoxin from entomogenous fungi - destruxin A (DA) and RNAi, the median lethal concentration (LC50) decreased by 70.67% compared to DA treatment only. Our results suggest that BtToll is an important component of the B. tabaci immune system. RNAi technology using dsToll combined with general control methods (using toxin only) can be used as a potential strategy in integrated B. tabaci management programs.