RESUMO
Germinated brown rice (GBR) contains rich bio-active components, but has poor edible quality. To improve the cooking quality of GBR, fissure generation in kernels caused by microwave drying were investigated considering cooking properties, microstructure and textural attributes. The microwave intensity had significant effects on the fissure percentage of GBR, and microwave intensity of 3-4 W/g may be suitable for the microwave drying of GBR based on the distribution of fissure percentage for the GBR. The fissures of GBR caused by microwave drying provided the suitable penetration routes of water into GBR kernel. Appropriate fissure amount in range of 3-4 in GBR kernels were conducive to increase its cooking quality and rice taste due to the moderate water absorption and starch gelatinization. The results present a new viewpoint from the perspective of fissures inside grain kernels to evaluate the drying quality of cereal materials such as GBR.
RESUMO
Concentration of fruit pulp is an important unit operation in food processing and has a wide range of applications. In this study, the microwave heating concentration (MHC) of raspberry pulp at different microwave powers, heating times and sample masses were investigated considering concentration characteristics and quality attributes. The results showed that increasing microwave power/heating time or decreasing sample mass significantly decreased the moisture content but had no significant effect on the temperature of raspberry pulp, while these conditions resulted in loss of total anthocyanin content and deterioration of total color difference. LF-NMR and SEM results revealed that the changes in temperature and moisture content caused by MHC significantly affected the total anthocyanin content and total color difference of the final product. Microwave power of 800 W, heating time of 3 min and sample mass of 90 g are selected as suitable parameters for MHC of raspberry pulp. This study may provide guidance for the development of appropriate technology for MHC of berry pulp.
RESUMO
To improve product quality and obtain suitable processing parameters for crab apple slices (CASs) produced by continuous microwave drying (CMD), the effects of processing parameters, including slice thickness, microwave power, air velocity, and conveyor belt speed, on the evaluation indexes in terms of temperature, moisture content, color (L*, a*, b*), hardness, brittleness, and total phenolic content of CASs were investigated via the response surface method. The results indicated that microwave power has the greatest effect on the evaluation indexes applied to the CASs under CMD, followed by air velocity, slice thickness, and conveyor belt speed. To produce the desired product quality, the appropriate parameters for CMD of CASs were optimized as 1.25 mm slice thickness, 14,630 W microwave power, 0.50 m·s-1 air velocity, and 0.33 m·min-1 conveyor belt speed. Following that, the moisture content under CMD was found to be 13.53%, the desired color, hardness 0.79 g, brittleness 12.97 (number of peaks), and the total phenolic content 5.48 mg·g-1. This research provides a theoretical framework for optimizing the processing parameters of CASs using the response surface method.
RESUMO
In present study, the quality profiles, microstructures and in vitro digestibility of pork chip snacks (PCS) prepared by microwave vacuum drying (MVD) under different drying times (20, 21, 22, 23, and 24 min) were investigated. The results revealed significant decreases in the moisture content and L*-value of PCS, while the protein/ash contents, a*-value, and b*-value of PCS markedly increased with prolonged MVD time (P < 0.05). Additionally, as MVD time extended from 20 to 24 min, the textural characteristics of PCS, particularly brittleness and crunchiness, initially increased and then gradually decreased (P < 0.05). Scanning electron microscopy (SEM) images showed that a moderate MVD time (22 min) resulted in the formation of larger pores in PCS, enhancing brittleness and crunchiness. However, excessive MVD time (24 min) led to the melting of these pores, subsequently reducing the brittleness and crunchiness of PCS. Furthermore, in vitro protein digestibility of PCS gradually decreased with increasing MVD time, primarily attributed to increased protein aggregation, as indicated by changes in sulfhydryl contents. In summary, our findings highlight that PCS subjected to 22 min of MVD exhibited the highest overall acceptability. This study provides a novel strategy for the application of MVD in the processing of meat snacks.
Assuntos
Manipulação de Alimentos , Micro-Ondas , Lanches , Animais , Vácuo , Suínos , Manipulação de Alimentos/métodos , Dessecação/métodos , Digestão , Cor , Microscopia Eletrônica de Varredura , Produtos da Carne/análiseRESUMO
The taste quality of ready-to-eat rice is influenced by the uniformity of temperature distribution during microwave reheating. The temperature distribution uniformity of ready-to-eat rice loaded in a rectangular lunch box is investigated under microwave reheating. The results show that with a 10-80 °C temperature increase in the ready-to-eat rice, the thermal conductivity increases, dielectric constant, and specific heat increase and then decrease, while the dielectric loss factor decreases and then slightly increases. The microwave-heating process of ready-to-eat rice exhibits a clear 'corner effect', and the observed 'hot spot' results in poor temperature uniformity in ready-to-eat rice. A metalized packaging structure design is subsequently proposed to ameliorate the temperature non-uniformity. According to comparative results of four metalized packaging forms, the spray film volume and film thickness corresponding to film volume are developed as 3.5×10-4 mL/mm2, 0.30 mm, respectively, which levels off the difference in temperature to improve the temperature distribution uniformity of ready-to-eat rice by microwave reheating.
RESUMO
Raspberry snack, as a novel berry product, has rich favor and high crisp taste, where controllable texture quality is conducive to the palatability of the snack. Determinative factors of microwave puffing in microwave intensity and duration and key property of material in Young's modulus were introduced to investigate the formation of texture quality of berry snack under microwave puffing. The results indicate that the microwave intensity has negative correlation with Young's modulus of raspberry chips, which causes the more porosity inside under microwave puffing. Reasonable Young's modulus of raspberry chips enhances the interior porosity and exterior expansion volume of raspberry snack due to the water vapor wrapped other than escaped. The greater microwave intensity results in the higher volume expansion of raspberry chips, in which the great volume expansion from porous pores structure confers moderate hardness. In microwave puffing, the formation of hardness and crispness of raspberry snack depend on microwave puffing parameters, leading to high temperature and great dehydration rate in quick puffing duration, in addition to Young's modulus of raspberry chips, where high dehydration rate accelerates water removal inside raspberry chips to form a harder texture with decreasing springiness, whereas low dehydration rate leads to the gentle change of springiness. Raspberry snack with uniform internal pores and regular shape forming desirable texture may be achieved under the microwave intensity of 7.5 W/g and the puffing duration of 6 min. This study indicates that high-quality raspberry snack may be achieved via controlling heating rate in microwave puffing.