RESUMO
The implication of 5-hydroxytryptamine 2C receptor (5-HT2CR) in depression is a topic of debate, and the underlying mechanisms remain largely unclear. We now elucidate hippocampal excitation-inhibition (E/I) balance underlies the regulatory effects of 5-HT2CR in depression. Molecular biological analyses showed that chronic mild stress (CMS) reduced the expression of 5-HT2CR in hippocampus. We revealed that inhibition of 5-HT2CR induced depressive-like behaviors, reduced GABA release and shifted the E/I balance towards excitation in CA3 pyramidal neurons by using behavioral analyses, microdialysis coupled with mass spectrum, and electrophysiological recording. Moreover, 5-HT2CR modulated neuronal nitric oxide synthase (nNOS)-carboxy-terminal PDZ ligand of nNOS (CAPON) interaction through influencing intracellular Ca2+ release, as determined by fiber photometry and coimmunoprecipitation. Notably, disruption of nNOS-CAPON by specific small molecule compound ZLc-002 or AAV-CMV-CAPON-125C-GFP, abolished 5-HT2CR inhibition-induced depressive-like behaviors, as well as the impairment in soluble N-ethylmaleimide-sensitive factor attachment protein receptor (SNARE) complex assembly-mediated GABA vesicle release and a consequent E/I imbalance. Importantly, optogenetic inhibition of CA3 GABAergic neurons prevented the effects of AAV-CMV-CAPON-125C-GFP on depressive behaviors in the presence of 5-HT2CR antagonist. Conclusively, our findings disclose the regulatory role of 5-HT2CR in depressive-like behaviors and highlight the hippocampal nNOS-CAPON coupling-triggered E/I imbalance as a pivotal cellular event underpinning the behavioral consequences of 5-HT2CR inhibition.
RESUMO
Flexible magnesium (Mg)-air batteries provide an ideal platform for developing efficient energy-storage devices toward wearable electronics and bio-integrated power sources. However, high-capacity bio-adaptable Mg-air batteries still face the challenges in low discharge potential and inefficient oxygen electrodes, with poor kinetics property toward oxygen reduction reaction (ORR). Herein, spinel nickel cobalt oxides (NiCo2O4) nanowires immobilized on nitrogen-doped Ti3C2Tx (NiCo2O4/N-Ti3C2Tx) are reported via surface chemical-bonded effect as oxygen electrodes, wherein surface-doped pyridinic-N-C and Co-pyridinic-N moieties accounted for efficient ORR owing to increased interlayer spacing and changed surrounding environment around Co metals in NiCo2O4. Importantly, in polyethylene glycol (PVA)-NaCl neutral gel electrolytes, the NiCo2O4/N-Ti3C2Tx-assembled quasi-solid wearable Mg-air batteries delivered high open-circuit potential of 1.5 V, good flexibility under various bent angles, high power density of 9.8 mW cm-2, and stable discharge duration to 12 h without obvious voltage drop at 5 mA cm-2, which can power a blue flexible light-emitting diode (LED) array and red smart rollable wearable device. The present study stimulates studies to investigate Mg-air batteries involving human-body adaptable neutral electrolytes, which will facilitate the application of Mg-air batteries in portable, flexible, and wearable power sources for electronic devices.
RESUMO
The main goal of this article is to discuss the expansion of click chemistry. A new catalyst composed of CuO nanoparticles embedded in Zn-MOF with the ligand 2,4,6-tris(4-carboxyphenoxy)-1,3,5-triazine (H3L) is presented. The incorporation of CuO nanoparticles into the Zn-MOF structure led to desirable morphology and catalytic properties. The designed catalyst was evaluated for its catalytic role in the multicomponent reaction and copper-catalyzed azide-alkyne cycloaddition (CuAAC) for preparation of triazole rings with 80-91% yield. The catalyst demonstrated an appealing architecture and exhibited robustness, high efficiency, and environmental friendliness. Characterization of the catalyst was performed using various techniques, including Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopes (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), elemental mapping, and X-ray diffraction (XRD). The results suggest that this novel catalyst has the potential to be a valuable tool in the development of new synthetic approaches for a wide range of applications.
RESUMO
The identification of the non-noble metal constituted TaO cluster as a potential analogue to the noble metal Au is significant for the development of tailored materials. It leverages the superatom concept to engineer properties with precision. However, the impact of incrementally integrating TaO units on the electronic configurations and properties within larger TaO-based clusters remains to be elucidated. By employing the density functional theory calculations, the global minima and low-lying isomers of the TanOn (n = 2-5) clusters were determined, and their structural evolution was disclosed. In the cluster series, Ta5O5 was found to possess the highest electron affinity (EA) with a value of 2.14 eV, based on which a dual external field (DEF) strategy was applied to regulate the electronic property of the cluster. Initially, the electron-withdrawing CO ligand was affixed to Ta5O5, followed by the application of an oriented external electric field (OEEF). The CO ligation was found to be able to enhance the Ta5O5 cluster's electron capture capability by adjusting its electron energy levels, with the EA of Ta5O5(CO)4 peaking at 2.58 eV. Subsequently, the introduction of OEEF further elevated the EA of the CO-ligated cluster. Notably, OEEF, when applied along the +x axis, was observed to sharply increase the EA to 3.26 eV, meeting the criteria for superhalogens. The enhancement of EA in response to OEEF intensity can be quantified as a functional relationship. This finding highlights the advantage of OEEF over conventional methods, demonstrating its capacity for precise and continuous modulation of cluster EAs. Consequently, this research has adeptly transformed tantalum oxide clusters into superhalogen structures, underscoring the effectiveness of the DEF strategy in augmenting cluster EAs and its promise as a viable tool for the creation of superhalogens.
RESUMO
BACKGROUND: To date, the classification of mesiodens has been based on the location, crown orientation, and morphology; however, there is no assistance aid focusing on choosing surgical approach. PURPOSE: This study aimed to introduce and evaluate a new surgical assistance aid for mesiodens extraction based on surgical approach. STUDY DESIGN, SETTING, SAMPLE: For the retrospective trial part of this study, case data from mesiodens patients who had surgery at the Affiliated Stomatological Hospital was collected, and a new surgical assistance aid was developed. A prospective randomized controlled trial was conducted on mesiodens patients who were seen in our department (patients with one mesiodens were included). PREDICTOR VARIABLE: The predictor variable was surgical approach either with or without the surgical assistance aid. Subjects were randomized to one of the two study groups. For subjects assigned to the group using the surgical assistance guide, the approach was selected according to the aid detailed in this study. For subjects assigned to the group without the surgical assistant aid, 2 residents chose an approach based on their judgment and review of relevant imaging and physical examination. MAIN OUTCOME VARIABLES: The preoperative evaluation time, operative time, and complications associated with surgery were recorded separately for the two groups. COVARIATES: The age and sex were also recorded. ANALYSES: Variables were analyzed using the independent t-test and χ2 test. The level of statistical significance is P < .05. RESULTS: In the retrospective trial part, a new surgical assistance aid for mesiodens extraction was developed based on the ideal surgical approach. In the prospective randomized controlled trial, the experimental group (n = 50) was statistically significant in preoperative evaluation time (4.51 ± 0.34 mins vs 5.43 ± 0.34 mins) and operative time (31.87 ± 5.57 mins vs 36.32 ± 5.28 mins) compared to the control group (n = 50) (P < .001). There was no significant intergroup difference in complications associated with surgery (P > .05). CONCLUSION AND RELEVANCE: The new surgical assistance aid developed in this study guides surgeons to ease the selection of surgical approaches and shorten the operative time.
Assuntos
Dente Supranumerário , Humanos , Estudos Retrospectivos , Estudos Prospectivos , Dente Supranumerário/cirurgia , Projetos de Pesquisa , Cuidados Pré-OperatóriosRESUMO
Exploration of new methodologies to tune catalytic selectivity is a long-sought goal in catalytic community. In this work, oil-water interfaces of Pickering emulsions are developed to effectively regulate catalytic selectivity of hydrogenation reactions, which was achieved via a precise control of the spatial distribution of metal nanoparticles at the droplet interfaces. It was found that Pd nanoparticles located in the inner interfacial layer of Pickering droplets exhibited a significantly enhanced selectivity for p-chloroaniline (up to 99.6%) in the hydrogenation of p-chloronitrobenzene in comparison to those in the outer interfacial layer (63.6%) in pure water (68.5%) or in pure organic solvents (46.8%). Experimental and theoretical investigations indicated that such a remarkable interfacial microregion-dependent catalytic selectivity was attributed to the microenvironments of the coexistence of water and organic solvent at the droplet interfaces, which could provide unique interfacial hydrogen-bonding interactions and solvation effects so as to alter the adsorption patterns of p-chloronitrobenzene and p-chloroaniline on the Pd nanoparticles, thereby avoiding the unwanted contact of C-Cl bonds with the metal surfaces. Our strategy of precise spatial control of catalysts at liquid-liquid interfaces and the unprecedented interfacial effect reported here not only provide new insights into the liquid-liquid interfacial reactions but also open an avenue to boost catalytic selectivity.
RESUMO
During protein folding and misfolding, structural properties and aggregation tendency can be significantly influenced by histidine behaviors (tautomeric behaviors and protonation behaviors). The original reasons were derived from the net charge changes and the various N/N-H orientation on imidazole rings. In the current study, total 18 independent REMD simulations were performed to investigate the histidine behaviors on four Tau peptide fragments (MBD, including R1, R2, R3, and R4 fragments). We found that, compared to R1, R2, R3 except (ϵδ), and R4 systems with flexible structural features, only R3(ϵδ) has dominating conformational structure (possibility of 81.3 %) with three ß-strand structures in parallel ß-sheet structures at I4-K6 and I24-H26, as well as antiparallel ß-sheet structure at G19-L21. Importantly, the H25 and H26 residues (in R3(ϵδ) system) are directly involved in the sheet structure formations and strong H-bonded interactions (possibility range of 31.3 %-44.7 %). Furthermore, the donors and acceptors analysis confirmed that only R3(ϵδ) shows faraway amino acids interaction features in both H25 and H26 residues, and such cooperation effects of two histidine residues contribute to current structural features. The current study will be helpful to further enrichment of the histidine behavior hypothesis, it provides new insight for understanding protein folding and misfolding.
Assuntos
Doença de Alzheimer , Humanos , Proteínas tau/química , Fragmentos de Peptídeos/química , Histidina/química , Modelos Moleculares , Estrutura Terciária de ProteínaRESUMO
Zn2+ is a very important factor in promoting the formation of amyloid beta (Aß) aggregates and amyloid plaques. The Zn2+ -bound Aß species generate amorphous or low molecular-weight oligomers. However, it is a lack of studies to approach the starting structural features (dimerization) in Aß nucleation processes with and without Zn2+ , which is the key point in understanding Zn2+ -induced nucleation mechanisms. To better understand the effect of concentration, structural properties, and the driving force, 14â independent replica exchange molecular dynamics simulations were performed in Aß28 dimerization with and without Zn2+ (zAß28 ) cooperation. Our scanning results show that the aggregation propensity is easier in Aß28 -Aß28 and Aß28 -zAß28 systems than zAß28 -zAß28 system. In binding property, the Aß28 -Aß28 model (-61.5â kcal mol-1 ) is stronger than zAß28 -zAß28 (-26.6â kcal mol-1 ) and Aß28 -zAß28 (-7.24â kcal mol-1 ) models. Further analysis confirmed that H13 and H14 residues play specific roles in the three systems. The key point is the orientation of N atom of the imidazole ring in histidine residues. Furthermore, we discovered different driving forces for each system. Our current study contributes to the understanding of how the Aß28 dimer interacts with Zn2+ , which could lead to new insights into Zn2+ -induced nucleation mechanisms.
Assuntos
Peptídeos beta-Amiloides , Zinco , Peptídeos beta-Amiloides/química , Dimerização , Zinco/química , Simulação de Dinâmica Molecular , Fragmentos de Peptídeos/químicaRESUMO
Histidine behaviors (including tautomeric and protonation behaviors, and integration on ε, δ, or p states) have been linked to protein folding and misfolding. However, the histidine behaviors of Aß(1-42) are unconfirmed, which is the key point to understanding the pathogenesis of Alzheimer's disease. In the current study, 19 replica exchange molecular dynamics (REMD) simulations were performed to investigate the impact of histidine on the structural properties in protonation evolution stages one, two, and three. In contrast to the deprotonated (εεε) state, our current findings demonstrate that any protonated state will promote the formation of the ß-sheet structure. The sheet-rich structures of (pεε), (δεp), (pεp), and (ppp) have the same basic characteristics of three-strand structures between the N-terminus, central hydrophobic core (CHC), and C-terminus. We found that the (pεε) (probability of 77.7%) and (δεp) (probability of 60.2%) prefer the abundant conformation over the other systems with higher regularity antiparallel ß-sheet structure characteristics. Further H-bonding results indicate that H6 and H14 are more essential than H13. In addition, the Pearson correlation coefficient analysis revealed that the experimental result coincided with our simulated (δpε) system. The current study aids in the better understanding of the mechanisms of histidine behaviors, providing a fresh outlook on protein folding and misfolding.
Assuntos
Peptídeos beta-Amiloides , Histidina , Histidina/química , Peptídeos beta-Amiloides/química , Fragmentos de Peptídeos/química , Simulação de Dinâmica MolecularRESUMO
Molecular diameter is an essential molecule-size descriptor that is widely used to understand, e.g., the gas separation preference of a permeable membrane. In this contribution, we have proposed two new molecular diameters calculated respectively by the circumscribed-cylinder method (Dn') and the group-separated method (Dn), and compared them with the already known kinetic diameter (Dk), averaged diameters (Dpa), and maximum diameters (Dpm and Dmm) in correlating with the penetration barriers of small gas molecules on a total of 14 porous carbon-based monolayer membranes (PCMMs). D1' and D2' give the best barrier-diameter correlations with average Pearson's correlation coefficients of 0.91 and 0.90, which are markedly larger than those (0.77, 0.76, 0.60, 0.48, 0.33, and 0.32) for D1, D2, Dk, Dpa, Dpm, and Dmm. Our results manifest that the choice of vdW radii set does not drastically change the barrier-diameter correlation. Our newly defined D1', D2', D1, and D2, especially D1' and D2', show universal applicability in predicting the relative permeability of small gas molecules on different PCMMs. The circumscribed-cylinder method proposed here is a facile approach that considers the molecule's directionality and can be applicable to larger molecules. The excellent linear correlation between Dn' and gas penetration barrier implies that the computationally less demanding molecular diameter Dn' can be an alternative to the penetration barrier in diagnosing the gas separation preference of the PCMMs.
RESUMO
Minimally invasive surgical robots have the advantages of high positioning accuracy, good stability, and flexible operation, which can effectively improve the quality of surgery and reduce the difficulty for doctors to operate. However, in order to realize the translation of the existing RCM mechanism, it is often necessary to add a mobile unit, which is often bulky and occupies most space above the patient's body, thus causing interference to the operation. In this paper, a new type of planar RCM mechanism is proposed. Based on this mechanism, a 3-DOF robotic arm is designed, which can complete the required motion for surgery without adding a mobile unit. In this paper, the geometric model of the mechanism is first introduced, and the RCM point of the mechanism is proven during the motion process. Then, based on the establishment of the geometric model of the mechanism, a kinematics analysis of the mechanism is carried out. The singularity, the Jacobian matrix, and the kinematic performance of the mechanism are analyzed, and the working space of the mechanism is verified according to the kinematic equations. Finally, a prototype of the RCM mechanism was built, and its functionality was tested using a master-slave control strategy.
Assuntos
Médicos , Robótica , Humanos , Procedimentos Cirúrgicos Minimamente Invasivos , Unidades Móveis de Saúde , Movimento (Física)RESUMO
Biochar that is directly obtained by pyrolysis exhibits a low adsorption efficiency; furthermore, the process of recycling adsorbents is ineffective. To solve these problems, conventional chemical coprecipitation, sol-gel, multimetal multilayer loading and biomass pyrolysis coking processes have been integrated. After selecting specific components for structural design, a novel high-performance biochar adsorbent was obtained. The effects of the O2 concentration and temperature on the regeneration characteristics were explored. An isothermal regeneration method to repair the deactivated adsorbent in a specific atmosphere was proposed, and the optimal regeneration mode and conditions were determined. The microscopic characteristics of the regenerated samples were revealed along with the mechanism of Hg0 removal and regeneration by using temperature-programmed desorption technology and adsorption kinetics. The results show that doping multiple metals can reduce the pyrolysis reaction barrier of the modified biomass. On the modified surface of the sample, the doped metals formed aggregated oxides, and the resulting synergistic effect enhanced the oxidative activity of the biochar carriers and the threshold effect of Ce oxide. The optimal regeneration conditions (5% O2 and 600 °C) effectively coordinated the competitive relationship between the deep carbonization process and the adsorption/oxidation site repair process; in addition, these conditions provided outstanding structure-effect connections between the physico-chemical properties and Hg0 removal efficiency of the regenerated samples. Hg0 adsorption by the regenerated samples is a multilayer mass transfer process that involves the coupling of physical and chemical effects, and the surface adsorption sites play a leading role.
Assuntos
Mercúrio , Poluentes Químicos da Água , Mercúrio/química , Carvão Vegetal/química , Pirólise , Adsorção , Óxidos , CinéticaRESUMO
Golgi apparatus is a major subcellular organelle responsible for drug resistance. Golgi apparatus-targeted nanomechanical disruption provides an attractive approach for killing cancer cells by multimodal mechanism and avoiding drug resistance. Inspired by the poisonous twisted fibrils in Alzheimer's brain tissue and enhanced rigidity of helical structure in nature, we designed transformable peptide C6RVRRF4KY that can self-assemble into nontoxic nanoparticles in aqueous medium but transformed into left-handed helical fibrils (L-HFs) after targeting and furin cleavage in the Golgi apparatus of cancer cells. The L-HFs can mechanically disrupt the Golgi apparatus membrane, resulting in inhibition of cytokine secretion, collapse of the cellular structure, and eventually death of cancer cells. Repeated stimulation of the cancers by the precursors causes no acquired drug resistance, showing that mechanical disruption of subcellular organelle is an excellent strategy for cancer therapy without drug resistance. This nanomechanical disruption concept should also be applicable to multidrug-resistant bacteria and viruses.
Assuntos
Nanopartículas , Neoplasias , Complexo de Golgi , Humanos , Neoplasias/tratamento farmacológicoRESUMO
The Mott state in 1T-TaS2 is predicted to host quantum spin liquids (QSLs). However, its insulating mechanism is controversial due to complications from interlayer coupling. Here, we study the charge transfer state in monolayer 1T-NbSe2, an electronic analogue to TaS2 exempt from interlayer coupling, using spectroscopic imaging scanning tunneling microscopy and first-principles calculations. Monolayer NbSe2 surprisingly displays two types of star of David (SD) motifs with different charge transfer gap sizes, which are interconvertible via temperature variation. In addition, bilayer 1T-NbSe2 shows a Mott collapse by interlayer coupling. Our calculation unveils that the two types of SDs possess distinct structural distortions, altering the effective Coulomb energies of the central Nb orbital. Our calculation suggests that the charge transfer gap, the same parameter for determining the QSL regime, is tunable with strain. This finding offers a general strategy for manipulating the charge transfer state in related systems, which may be tuned into the potential QSL regime.
RESUMO
Enzymatic microarchitectures with spatially controlled reactivity, engineered molecular sieving ability, favorable interior environment, and industrial productivity show great potential in synthetic protocellular systems and practical biotechnology, but their construction remains a significant challenge. Here, we proposed a Pickering emulsion interface-directed synthesis method to fabricate such a microreactor, in which a robust and defect-free MOF layer was grown around silica emulsifier stabilized droplet surfaces. The compartmentalized interior droplets can provide a biomimetic microenvironment to host free enzymes, while the outer MOF layer secludes active species from the surroundings and endows the microreactor with size-selective permeability. Impressively, the thus-designed enzymatic microreactor exhibited excellent size selectivity and long-term stability, as demonstrated by a 1000 h continuous-flow reaction, while affording completely equal enantioselectivities to the free enzyme counterpart. Moreover, the catalytic efficiency of such enzymatic microreactors was conveniently regulated through engineering of the type or thickness of the outer MOF layer or interior environments for the enzymes, highlighting their superior customized specialties. This study provides new opportunities in designing MOF-based artificial cellular microreactors for practical applications.
Assuntos
BiocatáliseRESUMO
We herein developed a new class of carborhodamines (CRs), i.e. 10-methoxy-substituted carborhodamines MCRs, by a simple synthesis procedure, which have absorption and emission wavelengths longer than classical CRs while retaining their excellent photophysical properties. Based on the MCR platform, we constructed the mitochondria-targeted fluorescent probe MCR-DMA and demonstrated its potential for sensing singlet oxygen (1O2) in living cells during the photodynamic therapy process.
Assuntos
Fotoquimioterapia , Corantes Fluorescentes , MitocôndriasRESUMO
By means of density functional theory (DFT) computations, we explored the potential of carbon- and nitrogen-doped Mo2P (CMP and NMP) layered materials as the representative of transition metal phosphides (TMPs) for the development of lithium-ion battery (LIB) anode materials, paying special attention to the synergistic effects of the dopants. Both CMP and NMP have exceptional stabilities and excellent electronic conductivity, and a high theoretical maximum storage capacity of â¼ 486 mA h g-1. Li-ion diffusion barriers on the two-dimensional (2D) CMP and NMP surfaces are extremely low (â¼0.036 eV), and it is expected that on these 2D layers Li can diffuse 104 times faster than that on MoS2 and graphene at room temperature, and both monolayers have relatively low average open-circuit voltage (0.38 and 0.4 eV). All these exceptional properties make CMP and NMP monolayers as promising candidates for high-performance LIB anode materials, which also demonstrates that simple doping is an effective strategy to enhance the performance of anode materials in rechargeable batteries.
RESUMO
Fungal contamination is a concern for the food industry. Fungal spores resist food sterilization treatments and produce mycotoxins that are toxic for animals and humans. Technologies that deactivate spores and toxins without impacting food quality are desirable. This study demonstrates the efficiency of a high voltage atmospheric cold plasma (HVACP) technology using air to generate reactive oxygen (ROS) and nitrogen (RNS) species for the degradation of Aspergillus flavus cultures and the deoxynivalenol (DON) mycotoxin. Optical emission and absorption spectroscopy demonstrate ionization of hydroxyl groups, atomic oxygen and nitrogen, and confirm production of ROS and RNS, e.g. O3, NO2, NO3, N2O4, and N2O5. Fungal cultures show a depletion in pigmentation and an ~50% spore inactivation after 1-min treatments. Treated spores show surface ablation and membrane degradation by scanning electron microscopy. Twenty-minute direct HVACP treatments of 100 µg of DON in one mL aqueous suspensions resulted in a greater than 99% reduction in DON structure and rescued over 80% of Caco-2 cell viability; however, the same treatment on 100 µg of powdered DON toxin only showed a 33% reduction in DON and only rescued 15% of cell viability. In summary, HVACP air treatment can inactivate both fungal spores and toxins in minutes.
Assuntos
Aspergillus flavus/efeitos dos fármacos , Gases em Plasma/farmacologia , Esporos Fúngicos/crescimento & desenvolvimento , Tricotecenos/metabolismo , Aspergilose/microbiologia , Aspergillus flavus/crescimento & desenvolvimento , Aspergillus flavus/metabolismo , Células CACO-2 , Humanos , Gases em Plasma/química , Espécies Reativas de Oxigênio/metabolismo , Esporos Fúngicos/efeitos dos fármacos , Esporos Fúngicos/metabolismoRESUMO
Robot-assisted minimally invasive surgery (MIS) has received increasing attention, both in the academic field and clinical operation. Master/slave control is the most widely adopted manipulation mode for surgical robots. Thus, sensing the force of the surgical instruments located at the end of the slave manipulator through the main manipulator is critical to the operation. This study mainly addressed the force detection of the surgical instrument and force feedback control of the serial surgical robotic arm. A measurement device was developed to record the tool end force from the slave manipulator. An elastic element with an orthogonal beam structure was designed to sense the strain induced by force interactions. The relationship between the acting force and the output voltage was obtained through experiment, and the three-dimensional force output was decomposed using an extreme learning machine algorithm while considering the nonlinearity. The control of the force from the slave manipulator end was achieved. An impedance control strategy was adopted to restrict the force interaction amplitude. Modeling, simulation, and experimental verification were completed on the serial robotic manipulator platform along with virtual control in the MATLAB/Simulink software environment. The experimental results show that the measured force from the slave manipulator can provide feedback for impedance control with a delay of 0.15 s.
Assuntos
Procedimentos Cirúrgicos Robóticos , Robótica , Cirurgia Assistida por Computador , Desenho de Equipamento , Retroalimentação , Procedimentos Cirúrgicos Minimamente InvasivosRESUMO
Anxiety is recognized as primary clinical phenotype of psychiatric disorders. However, many patients with anxiety have not yet received effective treatment. Our previous study demonstrated that hippocampal nNOS-CAPON interaction is implicated in anxiety-related behaviors, and blocking nNOS-CAPON interaction in the hippocampus produces anxiolytic-like effects. Here, ZLc-002, a small molecule inhibitor of nNOS-CAPON coupling, was evaluated for anxiolytic-like properties after systemic administered using anxiety behavioral tests, including open-field (OF), elevated plus maze (EPM), novelty-suppressed feeding (NSF) and light-dark (LD) tests. We reported that ZLc-002 when administered intraperitoneally at the dose of 40 or 80 mg/kg/d for 14 days produces anxiolytic-like effects. Furthermore, the similar effects of ZLc-002 were observed when administered intravenously at the dose of 10, 20 or 40 mg/kg/d for 7 days. More importantly, the mice dosing with 80 mg/kg/d ZLc-002 intraperitoneally or 40 mg/kg/d ZLc-002 intravenously for 3 days exerted significant behavioral effects. However, intragastric administration with ZLc-002 was devoid of effect on anxiety behaviors, even at high doses. Furthermore, intraperitoneal or intravenous treatment of ZLc-002 significantly disrupted the interaction between nNOS and CAPON in the hippocampus of adult mice, and there was a significant anxiolytic-like effect of ZLc-002 at day 3 after intrahippocampal microinjection. Our results verified that systemic administration of putative small molecule inhibitor of nNOS-CAPON can be used for the treatment of anxiety disorders.