Low-Temperature Methane Combustion Using Ozone over Coß Catalyst.

Catalytic methane (CH4) combustion is a promising approach to reducing the release of unburned methane in exhaust gas. Here, we report Co-exchanged ß zeolite (Coß) as an efficient catalyst for CH4 combustion using O3. A series of ion-exchanged ß zeolites (Co, Ni, Mn, Fe, and Pd) are subjected to the catalytic test, and Coß exhibits a superior performance in a low-temperature region (<100 °C). The results of X-ray absorption spectroscopy (XAS) and catalytic tests for Coß with different Co loadings indicate the isolated Co species is the plausible active site. The reaction mechanism of CH4 combustion over the isolated Co2+ cation is theoretically investigated by the single-component artificial force-induced reaction (SC-AFIR) method to thoroughly search for possible reaction routes. The resulting path toward CO2 formation shows an activation energy of 73 kJ/mol for the rate-determining step and an exothermicity of 1025 kJ/mol, which supports the experimental results. During a long-term catalytic test for 160 h without external heating, the CH4 conversion gradually decreases from 80 to 40%, but the conversion fully recovers after dehydration at 500 °C (0.5 h). The copresence of H2O and CO exhibits a negative impact on the catalytic activity, while NO and SO2 do not markedly change the catalytic activity.

Exploring Catalytic Intermediates in Pd-Catalyzed Aerobic Oxidative Amination of 1,3-Dienes: Multiple Metal Interactions of the Palladium Nanoclusters.

Metal nanoclusters (NCs) have unique properties because of their small size, which makes them useful as catalysts in reactions like cross-coupling. Pd-catalyzed oxidative amination, which involves dehydrogenative C-N bond formation, uses Pd complexes as the active species. It is known that the catalytic conditions involve the formation of Pd(0) species from Pd NCs, but the precise role of Pd NCs in the transformations has not been established. In this study, we investigated the characteristic properties of Pd NCs in oxidative amination of 1,3-dienes. The reaction achieved direct amination of commercially accessible 1,3-dienes with secondary aromatic amines, providing a variety of nitrogen containing 1,3-dienes. The compound was applicable to radical polymerization to provide the nitrogen-fabricated 1,3-diene-based polymer, which exhibited a different thermal stability compared to aliphatic nitrogen-fabricated diene polymers. In addition to the synthetic utility, by combining X-ray absorption fine structure and small-angle X-ray scattering analysis, we revealed amines and 1,3-dienes affected metal leaching from the Pd nanoparticles and stabilization of Pd NCs in the catalytic reaction. Additionally, DFT calculation suggested that the catalytic intermediate contained multiple adjacent Pd atoms and was responsible for formation of an σ-allylic intermediate that is difficult to form with the use of Pd complexes. These results could be used to understand the underlying phenomenon in the oxidative coupling reaction and develop Pd NCs-based dehydrogenation.

Contributions of London Dispersion Forces to Solution-Phase Association Processes.

ConspectusDespite their ubiquity and early discovery, London dispersion forces are often overlooked. This is due, in part, to the difficulty in assessing their contributions to molecular and polymeric structure, stability, properties, and reactivities. However, recent advances in modeling have revealed that dispersion interactions play an important role in many important chemical and biological processes. Experimental confirmation of their impact in solution has been challenging, leading to controversies about their relative importance.In the course of studying noncovalent interactions using molecular devices, our understanding and appreciation for the importance of dispersion interactions have evolved. This Account follows this intellectual journey by using examples from the literature. The goals are twofold: to describe recent advances in understanding the interaction and to provide guidance to researchers studying weak noncovalent interactions. However, first, the experimental methods for measuring the effects of dispersion interactions and the strategies for isolating their influence are described. These include the design of molecular devices to measure these weak noncovalent interactions and the strategies to disentangle the solvation, solvophobic, and dispersion components of the resulting equilibria.The literature examples are organized around five fundamental questions. (1) Do dispersion interactions have a measurable effect on solution equilibria? (2) To what extent do solvents attenuate or compensate for dispersion interactions? (3) To what extent do the solvation and solvophobic terms influence the dispersion equilibria? (4) Can we predict whether a system will form attractive dispersion or repulsive steric interactions? (5) Can the dispersion term be isolated and interrogated? We were often surprised by the answers to these questions. In each case, we describe how the systems were designed to address these questions and discuss possible interpretations of the results.While dispersion interactions in solution were weak (usually <1 kcal/mol), their influence on complexation and conformational equilibria can be observed and measured. This underscores the significance of these interactions in molecular recognition, coordination chemistry, reaction design, and catalysis. The solvent components of the dispersion equilibria can also be significant. Therefore, the isolation of the dispersion contributions from the solvation and solvophobic effects represents an ongoing challenge. The experimental studies also provide important benchmarks and offer valuable insights to help refine the next generation of computational solvent models.

Transition State Stabilizing Effects of Oxygen and Sulfur Chalcogen Bond Interactions.

Non-covalent chalcogen bond (ChB) interactions have found utility in many fields, including catalysis, organic semiconductors, and crystal engineering. In this study, the transition stabilizing effects of ChB interactions of oxygen and sulfur were experimentally measured using a series of molecular rotors. The rotors were designed to form ChB interactions in their bond rotation transition states. This enabled the kinetic influences to be assessed by monitoring changes in the rotational barriers. Despite forming weaker ChB interactions, the smaller chalcogens were able to stabilize transition states and had measurable kinetic effects on the rotational barriers. Sulfur stabilized the bond rotation transition state by as much as -7.2 kcal/mol without electron-withdrawing groups. The key was to design a system where the sulfur σ ${\sigma }$ -hole was aligned with the lone pairs of the chalcogen bond acceptor. Oxygen rotors also could form transition state stabilizing ChB interactions but required electron-withdrawing groups. For both oxygen and sulfur ChB interactions, a strong correlation was observed between transition state stabilizing abilities and electrostatic potential (ESP) of the chalcogen, providing a useful predictive parameter for the rational design of future ChB systems.

Soy-fortelin: A ghrelin sensitivity-enhancing peptide that stimulates food intake in aged mice.

Ghrelin sensitivity is known to decrease with aging in mice and humans, and the decrease contributes to anorexia with aging. In this study, we discovered novel ghrelin sensitivity-enhancing peptides. Ghrelin sensitivity was evaluated by examining whether dipeptide samples enhanced the calcium response to ghrelin in the growth hormone secretagogue receptor-transfected cell line. First, dipeptides were screened using a 336-dipeptide library and we revealed that Ser-Tyr (SY) potentiated ghrelin sensitivity in particular. Based on the structure-activity relationship determined using the dipeptide library and comprehensive analysis of peptides in the chymotrypsin digest of soy ß-conglycinin (ß-CG), which enhanced ghrelin sensitivity, candidate peptides were narrowed down. Among the chemosynthesized peptides, we discovered that an undecapeptide, SLVNNDDRDSY, corresponding to ß-CGα(267-277), stimulated ghrelin sensitivity in vitro. This peptide enhanced the orexigenic activity of ghrelin in C57BL/6 mice and stimulated food intake. Thus, we demonstrated that SLVNNDDRDSY stimulated ghrelin sensitivity in vitro and in vivo and named it "soy-fortelin". Moreover, orally administered soy-fortelin had a similar but smaller effect in the young C57BL/6 mice, whereas it strongly stimulated food intake in 2-year-old aged mice that exhibited high blood ghrelin levels and low ghrelin sensitivity. In conclusion, we discovered soy-fortelin as a novel peptide that enhances ghrelin sensitivity in vivo and in vitro and increases food intake in young and aged ghrelin-resistant mice. Soy-fortelin is the first food-derived peptide reported to enhance ghrelin sensitivity.

Microporosity and Catalytic Activity for Hydrodesulfurization of Pharmacosiderite Mo4P3O16 Synthesized at a Moderate Temperature.

Pharmacosiderite Mo4P3O16 (Pharma-MoPO) consists of [Mo4O4] cubane unit and [PO4] tetrahedral to form an open framework with a microporous structure similar to that of LTA-type zeolite. Although attractive applications are expected due to its microporous structure and redox-active components, its physicochemical properties have been poorly investigated due to the specificity of its synthesis, which requires a high hydrothermal synthesis temperature of 360 °C. In this study, we succeeded in synthesizing Pharma-MoPO by hydrothermal synthesis at 230 °C, which can be applied using a commercially available autoclave by changing the metal source. Through the study of the solids and liquids obtained after hydrothermal syntheses, the formation process of Pharma-MoPO under our studied synthesis conditions was proposed. Advanced characterizations provided detailed structural information on Pharma-MoPO, including the location site of a countercation NH4+. Pharma-MoPO could adsorb CO2 with the amount close to the number of cages without removing NH4+. Pharma-MoPO exhibited stable catalytic activity for the hydrodesulfurization of thiophene while maintaining its crystal structure, except for the introduction of sulfide by replacing lattice oxygens. Pharmacosiderite Mo4P3O16 was successfully obtained by hydrothermal synthesis at a moderate temperature, and its microporosity for CO2 adsorption and catalytic properties for hydrodesulfurization were discovered.

NASC 2023: Showcasing Diversity in North American Supramolecular Chemistry.

Diversity in supramolecular chemistry can showcase itself in many ways. This includes the diversity of thought and topics covered in research (from fundamental science to applications in biology and materials), as well as the diversity of people (e.g., diversity in race, gender, sexual orientation, country of origin, type of higher education institute, career stage,…). At the North American Supramolecular Chemistry (NASC) meetings, we aim to bring together the best that supramolecular chemistry has to offer in North America, create a sense of community and provide a platform for researchers at any stage of their career to present their work. NASC 2023 was the successful second edition of the NASC meeting series, and this proceedings article highlights the research and impressions of some of the speakers at NASC 2023.

Empirical Model of Solvophobic Interactions in Organic Solvents.

An empirical model was developed to predict organic solvophobic effects using N-phenylimide molecular balances functionalized with non-polar alkyl groups. Solution studies and X-ray crystallography confirmed intramolecular alkyl-alkyl interactions in their folded conformers. The structural modularity of the balances allowed systematic variation of alkyl group lengths. Control balances were instrumental in isolating weak organic solvophobic effects by eliminating framework solvent-solute effects. A 19 F NMR label enabled analysis across 46 deuterated and non-deuterated solvent systems. Linear correlations were observed between organic solvophobic effects and solvent cohesive energy density (ced) as well as changes in solvent-accessible surface areas (SASA). Using these empirical relationships, a model was constructed to predict organic solvophobic interaction energy per unit area for any organic solvent with known ced values. The predicted interaction energies aligned with recent organic solvophobic measurements and literature values for the hydrophobic effect on non-polar surfaces confirmed the model's accuracy and utility.

Interstitial Carbon Dopant in Palladium-Gold Alloy Boosting the Catalytic Performance in Vinyl Acetate Monomer Synthesis.

Vinyl acetate monomer (VAM), an important chemical intermediate in industry, is produced by the well-established commercial process of acetoxylation of ethylene with Pd-Au/SiO2 and a KOAc promoter. No paper has since decades defined the true effects of Au and KOAc, despite numerous attempts to clarify them. The role of subsurface carbon as a catalyst booster for enhanced catalytic performance in VAM synthesis was found by us for the first time. X-ray diffraction and X-ray absorption fine structure studies revealed that carbon atoms spontaneously doped into the Pd-Au alloy lattice while maintaining the alloy's size, metallic state, and alloy composition. Additionally, during the process, the KOAc addition dramatically raised the equilibrium carbide fraction. Because of the high carbide fraction, KOAc/Pd0.8Au0.2/SiO2 had a 5.6-fold higher formation rate (89.0% selectivity) than Pd0.8Au0.2/SiO2 (69.2% selectivity) due to high carbide fraction. Surprisingly, kinetic and theoretical analyses showed that the coupling of acetate and ethylene, which is a rate-determining step, is effectively promoted by the synergistic contributions of Au (electronic/geometric effects) and interstitial carbon (electronic effect). Additionally, the synergy inhibits ethylene dehydrogenation, which ultimately slows the formation of CO2. The contentious debates about the roles of Au and KOAc in the acetoxylation of ethylene have been resolved thanks to experimental and theoretical insights into the roles of Pd-Au formation, Au/Pd ratio, and interstitial carbon atoms. These insights also open the door for the logical design of catalysts with desirable catalytic performance.

Dynamic Behavior of Intermediate Adsorbates to Control Activity and Product Selectivity in Heterogeneous Catalysis: Methanol Decomposition on Pt/TiO2(110).

Dynamic behavior of intermediate adsorbates, such as diffusion, spillover, and reverse spillover, has a strong influence on the catalytic performance in oxide-supported metal catalysts. However, it is challenging to elucidate how the intermediate adsorbates move on the catalyst surface and find active sites to give the corresponding products. In this study, the effect of the dynamic behavior of methoxy intermediate on methanol decomposition on a Pt/TiO2(110) surface has been clarified by combination of scanning tunneling microscopy (STM), temperature-programmed desorption (TPD), and density functional theory (DFT) calculations. The methoxy intermediates were formed by the dissociative adsorption of methanol molecules on Pt nanoparticles at room temperature followed by spillover to the TiO2(110) support surface. TPD results showed that the methoxy intermediates were thermally decomposed at >350 K on the Pt sites to produce CO (dehydrogenation) and CH4 (C-O bond scission). A decrease of the Pt nanoparticle density lowered the activity for the decomposition reaction and increased the selectivity toward CH4, which indicates that the reaction is controlled by diffusion and reverse spillover of the methoxy intermediates. Time-lapse STM imaging and DFT calculations revealed that the methoxy intermediates migrate on the five-fold coordinated Ti (Ti5c) sites along the [001] or [11¯0] direction with the aid of hydrogen adatoms bonded to the bridging oxygens (Obr) and can move over the entire surface to seek and find active Pt sites. This work offers an in-depth understanding of the important role of intermediate adsorbate migration in the control of the catalytic performance in oxide-supported metal catalysts.

Molybdenum Oxide Constructed by {Mo6O21}6- Pentagonal Unit Assembly and Its Redox Properties.

Molybdenum oxides are widely used in various fields due to their electronic and structural characteristics. These materials can generate lattice oxygen defects by reduction treatments, which sometimes play central roles in various applications. However, little has been understood about their properties since it is difficult to increase the amount of lattice oxygen defects due to the crystal structure changes in most cases. Here, we report a new class of high-dimensionally structured Mo oxide (HDS-MoOx) constructed by the random assembly of {Mo6O21}6- pentagonal units (PUs). Since the PU is a stable structural unit, the structural network based on the PU hardly caused structural changes to make the lattice oxygen defects vanish. Consequently, HDS-MoOx could generate a substantial amount of lattice oxygen defects, and their amount was controllable, at least in the range of MoO2.64-MoO3.00. HDS-MoOx was more redox active than typical Mo oxide (α-MoO3) and demonstrated an oxidation ability for gas-phase isopropanol oxidation under the reaction conditions, whereas α-MoO3 affords no oxidation products.

Continuous Unsteady-State De-NOx System via Tandem Water-Gas Shift, NH3 Synthesis, and NH3-SCR under Periodic Lean/Rich Conditions.

The development of urea-free and platinum group metal (PGM)-free catalytic systems for automotive emission control is a challenging task. Herein, we report a new de-NOx system using cyclic feeds of rich and lean gas mixtures with PGM-free catalysts. Initial catalyst screening tests showed that Cu/CeO2 with 5 wt % Cu loading was the most suitable for the water-gas shift reaction (WGS, CO + H2O → CO2 + H2), followed by the selective NH3 synthesis by the NO + H2 reaction. The unsteady-state system under alternating feeds of rich (0.1% NO + 0.5% CO + 1% H2O) and lean (0.1% NO + 2% O2 + 1% H2O) gas mixtures over a mixture of Cu/CeO2 and Cr-exchanged mordenite (CrMOR) showed higher NOx conversion than the steady-state (0.1% NO + 0.35% CO + 0.6% O2 + 1% H2O) reaction between 200 and 500 °C. The de-NOx mechanism under periodical rich/lean conditions was studied by operando infrared (IR) experiments. In the rich period, the WGS reaction on the Cu/CeO2 catalyst yield H2, which reduces NO to NH3 on the Cu/CeO2 catalyst. NH3 is then captured by the Brønsted acid sites of CrMOR. In the subsequent lean period, the adsorbed NH3 acts as a reductant for the selective catalytic reduction of NOx catalyzed by the Cr sites of CrMOR. This study demonstrates a new urea-free and PGM-free catalytic system that can provide an alternative de-NOx technology for automotive catalysis under periodic rich/lean conditions.

Mechanism of NH3-SCR over P/CeO2 Catalysts Investigated by Operando Spectroscopies.

This study reports a comprehensive investigation into the active sites and reaction mechanism for the selective catalytic reduction of NO by NH3 (NH3-SCR) over phosphate-loaded ceria (P/CeO2). Catalyst characterization and density functional theory calculations reveal that H3PO4 and H2P2O6 species are the dominant phosphate species on the P/CeO2 catalysts under the experimental conditions. The reduction/oxidation half-cycles (RHC/OHC) were investigated using in situ X-ray absorption near-edge structure for Ce L3-edge, ultraviolet-visible, and infrared (IR) spectroscopies together with online analysis of outlet products (operando spectroscopy). The Ce4+(OH-) species, possibly adjacent to the phosphate species, are reduced by NO + NH3 to produce N2, H2O, and Ce3+ species (RHC). The Ce3+ species is reoxidized by aqueous O2 (OHC). The results from IR spectroscopy suggest that the RHC initiates with the reaction between NO and Ce4+(OH-) to yield Ce3+ and gaseous HONO, which then react with NH3 to produce N2 and H2O via NH4NO2 intermediates.

In- and Ga-oxo clusters/hydrides in zeolites: speciation and catalysis for light-alkane activations/transformations.

Metal-exchanged zeolites have great potential to form unique active metal species and develop their catalysis by promoting small molecules such as light alkanes. Ga-exchanged zeolites have attracted attention as promising heterogeneous catalysts for dehydrogenative light-alkane transformations. The speciation of active Ga species in reduced and oxidized Ga-exchanged zeolites and their reaction mechanisms have been discussed in several studies based on experimental and theoretical investigations. In contrast, studies on In-exchanged zeolites have been far less explored, and thus active In-species have rarely been investigated. In this perspective, we summarized our investigations on In- and Ga-exchanged zeolites for light-alkane transformations. Our research group reported the formation of In-oxo clusters using the O2 treatment of In-CHA and their potential for the partial oxidation of CH4 (POM) at room temperature. We also observed the formation of In-hydrides in CHA zeolites during the preparation through reductive solid-state ion-exchange (RSSIE) and revealed their catalysis for non-oxidative C2H6 dehydrogenation (EDH). Their detailed structures and reaction mechanisms are discussed in combination with spectroscopic, kinetic, and theoretical studies. Furthermore, comparative studies on the formation of Ga-oxo clusters for POM at room temperature and the controlled formation of Ga-hydrides for selective EDH were conducted. The obtained results and insights are comprehensively discussed, including the relationship between the local structure of the active In/Ga species and reaction selectivity, as well as the influence of different zeolite frameworks on the formation of active species.

An automated reaction route mapping for the reaction of NO and active species on Ag4 clusters in zeolites.

A computational investigation of the catalytic reaction on multinuclear sites is very challenging. Here, using an automated reaction route mapping method, the single-component artificial force induced reaction (SC-AFIR) algorithm, the catalytic reaction of NO and OH/OOH species over the Ag42+ cluster in a zeolite is investigated. The results of the reaction route mapping for H2 + O2 reveal that OH and OOH species are formed over the Ag42+ cluster via an activation barrier lower than that of OH formation from H2O dissociation. Then, reaction route mapping is performed to examine the reactivity of the OH and OOH species with NO molecules over the Ag42+ cluster, resulting in the facile reaction path of HONO formation. With the aid of the automated reaction route mapping, the promotion effect of H2 addition on the SCR reaction was computationally proposed (boosting the formation of OH and OOH species). In addition, the present study emphasizes that automated reaction route mapping is a powerful tool to elucidate the complicated reaction pathway on multi-nuclear clusters.

Surface Engineering of Titania Boosts Electroassisted Propane Dehydrogenation at Low Temperature.

Electric field catalysis using surface proton conduction, in which proton hopping and collision on the reactant are promoted by external electricity, is a promising approach to break the thermodynamic equilibrium limitation in endothermic propane dehydrogenation (PDH). This study proposes a catalyst design concept for more efficient electroassisted PDH at low temperature. Sm was doped into the anatase TiO2 surface to increase surface proton density by charge compensation. Pt-In alloy was deposited on the Sm-doped TiO2 for more favorable proton collision and selective propylene formation. The catalytic activity in electroassisted PDH drastically increased by doping an appropriate amount of Sm (1 mol % to Ti) where the highest propylene yield of 19.3 % was obtained at 300 °C where the thermodynamic equilibrium yield was only 0.5 %. Results show that surface proton enrichment boosts alkane dehydrogenation at low temperature.

Pnictogen Interactions with Nitrogen Acceptors.

Stabilizing nitrogen pnictogen bond interactions were measured using molecular rotors. Intramolecular C=O⋅⋅⋅N interactions were formed in the bond rotation transition states which lowered the rotational barriers and increased the rates of rotation, as measured by EXSY NMR. The pnictogen interaction energies show a very strong correlation with the positive electrostatic potential on nitrogen, which was consistent with a strong electrostatic component. In contrast, the NBO perturbation and pyramidalization analyses show no correlation, suggesting that the orbital-orbital component is minor. The strongest C=O⋅⋅⋅N pnictogen interactions were comparable to C=O⋅⋅⋅C=O interactions and were stronger than C=O⋅⋅⋅Ph interactions, when measured using the same N-phenylimide rotor system. The ability of the nitrogen pnictogen interactions to stabilize transition states and enhance kinetic processes demonstrates their potential in catalysis and reaction design.

Super Mg2+ Conductivity around 10-3 S cm-1 Observed in a Porous Metal-Organic Framework.

We first report a solid-state crystalline "Mg2+ conductor" showing a superionic conductivity of around 10-3 S cm-1 at ambient temperature, which was obtained using the pores of a metal-organic framework (MOF), MIL-101, as ion-conducting pathways. The MOF, MIL-101⊃{Mg(TFSI)2}1.6 (TFSI- = bis(trifluoromethanesulfonyl)imide), containing Mg2+ inside its pores, showed a superionic conductivity of 1.9 × 10-3 S cm-1 at room temperature (RT) (25 °C) under the optimal guest vapor (MeCN), which is the highest value among all Mg2+-containing crystalline compounds. The Mg2+ conductivity in the MOF was estimated to be 0.8 × 10-3 S cm-1 at RT, by determining the transport number of Mg2+ (tMg2+ = 0.41), which is the level as high as practical use for secondary battery. Measurements of adsorption isotherms, pressure dependence of ionic conductivity, and in situ Fourier transform infrared measurements revealed that the "super Mg2+ conductivity" is caused by the efficient migration of the Mg2+ carrier with the help of adsorbed guest molecules.

High-Entropy Intermetallics Serve Ultrastable Single-Atom Pt for Propane Dehydrogenation.

Propane dehydrogenation has been a promising propylene production process that can compensate for the increasing global demand for propylene. However, Pt-based catalysts with high stability at ≥600 °C have barely been reported because the catalysts typically result in short catalyst life owing to side reactions and coke formation. Herein, we report a new class of heterogeneous catalysts using high-entropy intermetallics (HEIs). Pt-Pt ensembles, which cause side reactions, are entirely diluted by the component inert metals in PtGe-type HEIs. The resultant HEI (PtCoCu) (GeGaSn)/Ca-SiO2 exhibited an outstandingly high catalytic stability, even at 600 °C (kd-1 = τ = 4146 h = 173 d), and almost no deactivation of the catalyst was observed for 2 months for the first time. Detailed experimental studies and theoretical calculations demonstrated that the combination of the site-isolation and entropy effects upon multi-metallization of PtGe drastically enhanced the desorption of propylene and the thermal stability, eventually suppressing the side reactions even at high reaction temperatures.

Oxidation Catalysis over Solid-State Keggin-Type Phosphomolybdic Acid with Oxygen Defects.

Keggin-type phosphomolybdic acid (PMo12O40), treated with pyridine (Py), forms a crystalline material (PyPMo-HT) following heat treatment under an inert gas flow at ∼420 °C. Although this material is known to have attractive catalytic properties for gas-phase oxidation, the origin of this catalytic activity requires clarification. In this study, we investigated the crystal structure of PyPMo-HT. PyPMo-HT comprises a one-dimensional array of Keggin units and pyridinium cations (HPy), with an HPy/Keggin unit ratio of ∼1.0. Two oxygen atoms were removed from the Keggin unit during crystal structure transformation, which resulted in an electron being localized on the Mo atom in close contact with the adjacent Keggin unit. Upon the introduction of molecular oxygen, electron transfer from this Mo atom resulted in the formation of an electrophilic oxygen species that bridged two Keggin units. The electrophilic oxygen species acted as a catalytically active oxygen species, as confirmed by the selective oxidation of propylene. PyPMo-HT showed excellent catalytic activity for the selective oxidation of methacrolein, with the methacrylic acid yield being superior to that obtained with PMo12O40 and comparable to that obtained with an industrial Keggin-type polyoxometalate (POM) catalyst. The oxidation catalysis observed over PyPMo-HT provides a deeper understanding of POM-based industrial catalytic processes.