Thickness-Dependent Interface Polarity in Infinite-Layer Nickelate Superlattices.

The interface polarity plays a vital role in the physical properties of oxide heterointerfaces because it can cause specific modifications of the electronic and atomic structure. Reconstruction due to the strong polarity of the NdNiO2/SrTiO3 interface in recently discovered superconducting nickelate films may play an important role, as no superconductivity has been observed in the bulk. By employing four-dimensional scanning transmission electron microscopy and electron energy-loss spectroscopy, we studied effects of oxygen distribution, polyhedral distortion, elemental intermixing, and dimensionality in NdNiO2/SrTiO3 superlattices grown on SrTiO3 (001) substrates. Oxygen distribution maps show a gradual variation of the oxygen content in the nickelate layer. Remarkably, we demonstrate thickness-dependent interface reconstruction due to a polar discontinuity. An average cation displacement of ∼0.025 nm at interfaces in 8NdNiO2/4SrTiO3 superlattices is twice larger than that in 4NdNiO2/2SrTiO3 superlattices. Our results provide insights into the understanding of reconstructions at NdNiO2/SrTiO3 polar interfaces.

Determination of Grain-Boundary Structure and Electrostatic Characteristics in a SrTiO3 Bicrystal by Four-Dimensional Electron Microscopy.

The grain boundary (GB) plays a critical role in a material's properties and device performance. Therefore, the characterization of a GB's atomic structure and electrostatic characteristics is a matter of great importance for materials science. Here, we report on the atomic structure and electrostatic analysis of a GB in a SrTiO3 bicrystal by four-dimensional scanning transmission electron microscopy (4D-STEM). We demonstrate that the Σ5 GB is Ti-rich and poor in Sr. We investigate possible effects on the variation in the atomic electrostatic field, including oxygen vacancies, Ti-valence change, and accumulation of cations. A negative charge resulting from a space-charge zone in SrTiO3 compensates a positive charge accumulated at the GB, which is in agreement with the double-Schottky-barrier model. It demonstrates the feasibility of characterizing the electrostatic properties at the nanometer scale by 4D-STEM, which provides comprehensive insights to understanding the GB structure and its concomitant effects on the electrostatic properties.

Catalyzing Bond-Dissociation in Graphene via Alkali-Iodide Molecules.

Atomic design of a 2D-material such as graphene can be substantially influenced by etching, deliberately induced in a transmission electron microscope. It is achieved primarily by overcoming the threshold energy for defect formation by controlling the kinetic energy and current density of the fast electrons. Recent studies have demonstrated that the presence of certain species of atoms can catalyze atomic bond dissociation processes under the electron beam by reducing their threshold energy. Most of the reported catalytic atom species are single atoms, which have strong interaction with single-layer graphene (SLG). Yet, no such behavior has been reported for molecular species. This work shows by experimentally comparing the interaction of alkali and halide species separately and conjointly with SLG, that in the presence of electron irradiation, etching of SLG is drastically enhanced by the simultaneous presence of alkali and iodine atoms. Density functional theory and first principles molecular dynamics calculations reveal that due to charge-transfer phenomena the CC bonds weaken close to the alkali-iodide species, which increases the carbon displacement cross-section. This study ascribes pronounced etching activity observed in SLG to the catalytic behavior of the alkali-iodide species in the presence of electron irradiation.

Secondary-Phase-Assisted Grain Boundary Migration in CuInSe_{2}.

Significant structural evolution occurs during the deposition of CuInSe_{2} solar materials when the Cu content increases. We use in situ heating in a scanning transmission electron microscope to directly observe how grain boundaries migrate during heating, causing nondefected grains to consume highly defected grains. Cu substitutes for In in the near grain boundary regions, turning them into a Cu-Se phase topotactic with the CuInSe_{2} grain interiors. Together with density functional theory and molecular dynamics calculations, we reveal how this Cu-Se phase makes the grain boundaries highly mobile.

Probing plasmonic excitation mechanisms and far-field radiation of single-crystalline gold tapers with electrons.

Conical metallic tapers represent an intriguing subclass of metallic nanostructures, as their plasmonic properties show interesting characteristics in strong correlation to their geometrical properties. This is important for possible applications such as in the field of scanning optical microscopy, as favourable plasmonic resonance behaviour can be tailored by optimizing structural parameters like surface roughness or opening angle. Here, we review our recent studies, where single-crystalline gold tapers were investigated experimentally by means of electron energy-loss and cathodoluminescence spectroscopy techniques inside electron microscopes, supported by theoretical finite-difference time-domain calculations. Through the study of tapers with various opening angles, the underlying resonance mechanisms are discussed. This article is part of a discussion meeting issue 'Dynamic in situ microscopy relating structure and function'.

Exploring the Electronic Structure and Chemical Homogeneity of Individual Bi2Te3 Nanowires by Nano-Angle-Resolved Photoemission Spectroscopy.

Due to their high surface-to-volume ratio, cylindrical Bi2Te3 nanowires are employed as model systems to investigate the chemistry and the unique conductive surface states of topological insulator nanomaterials. We report on nanoangle-resolved photoemission spectroscopy (nano-ARPES) characterization of individual cylindrical Bi2Te3 nanowires with a diameter of 100 nm. The nanowires are synthesized by electrochemical deposition inside channels of ion-track etched polymer membranes. Core level spectra recorded with submicron resolution indicate a homogeneous chemical composition along individual nanowires, while nano-ARPES intensity maps reveal the valence band structure at the single nanowire level. First-principles electronic structure calculations for chosen crystallographic orientations are in good agreement with those revealed by nano-ARPES. The successful application of nano-ARPES on single one-dimensional nanostructures constitutes a new avenue to achieve a better understanding of the electronic structure of topological insulator nanomaterials.

Reflection and Phase Matching in Plasmonic Gold Tapers.

We investigate different dynamic mechanisms, reflection and phase matching, of surface plasmons in a three-dimensional single-crystalline gold taper excited by relativistic electrons. Plasmonic modes of gold tapers with various opening angles from 5° to 47° are studied both experimentally and theoretically, by means of electron energy-loss spectroscopy and finite-difference time-domain numerical calculations, respectively. Distinct resonances along the taper shaft are observed in tapers independent of opening angles. We show that, despite their similarity, the origin of these resonances is different at different opening angles and results from a competition between two coexisting mechanisms. For gold tapers with large opening angles (above ∼20°), phase matching between the electron field and that of higher-order angular momentum modes of the taper is the dominant contribution to the electron energy-loss because of the increasing interaction length between electron and the taper near-field. In contrast, reflection from the taper apex dominates the EELS contrast in gold tapers with small opening angles (below ∼10°). For intermediate opening angles, a gradual transition of these two mechanisms was observed.

Observation and Origin of Extraordinary Atomic Mobility at Metal-Semiconductor Interfaces at Low Temperatures.

Extraordinarily high mobility of Si and Ge atoms at semiconductor (Si, Ge)-metal (Al) interfaces is observed at temperatures as low as 80 K during thin metal film deposition. In situ x-ray photoemission spectroscopic valence-band measurements reveal a changed chemical bonding nature of the semiconductor atoms, from localized covalentlike to delocalized metalliclike, at the interface with the Al metal. The resulting delocalized bonding nature of the interfacial semiconductor atoms brings about the observed extreme enhancement of their mobility. The finding opens avenues for tailoring reaction kinetics and phase transformations in nanostructured materials, as functional thin-film systems, at ultralow temperatures by dedicated interfacial design.

Direct observation of strong surface reconstruction in partially reduced nickelate films.

The polarity of a surface can affect the electronic and structural properties of oxide thin films through electrostatic effects. Understanding the mechanism behind these effects requires knowledge of the atomic structure and electrostatic characteristics at the surface. In this study, we use annular bright-field imaging to investigate the surface structure of a Pr0.8Sr0.2NiO2+x (0 < x < 1) film. We observe a polar distortion coupled with octahedral rotations in a fully oxidized Pr0.8Sr0.2NiO3 sample, and a stronger polar distortion in a partially reduced sample. Its spatial depth extent is about three unit cells from the surface. Additionally, we use four-dimensional scanning transmission electron microscopy (4D-STEM) to directly image the local atomic electric field surrounding Ni atoms near the surface and discover distinct valence variations of Ni atoms, which are confirmed by atomic-resolution electron energy-loss spectroscopy (EELS). Our results suggest that the strong surface reconstruction in the reduced sample is closely related to the formation of oxygen vacancies from topochemical reduction. These findings provide insights into the understanding and evolution of surface polarity at the atomic level.

Ultrathin 2D coordination polymer nanosheets by surfactant-mediated synthesis.

Low-dimensional nanostructures offer a host of intriguing properties which are distinct from those of the bulk material, owing to size-confinement effects and amplified surface areas. Here, we report on the scalable, bottom-up synthesis of ultrathin coordination polymer nanosheets via surfactant-mediated synthesis and subsequent exfoliation. Layers of a two-dimensional (2D) zinc coordination polymer are self-assembled in the interlamellar space of a reverse microemulsion mesophase into stacks of nanosheets interleaved with cethyltrimethylammonium bromide (CTAB) at regular intervals, thus giving rise to a lamellar hybrid mesostructure with a lattice period of ~8 nm and an underlying highly crystalline substructure. The basic structural motif is composed of 2D acetato-benzimidazolato-zinc layers of tetrahedrally coordinated zinc joined together by anionic acetate and benzimidazolate ligands. The hierarchical structure was studied by PXRD, TEM, EDX, EELS, AFM, and solid-state NMR spectroscopy, revealing a high level of order on both the atomic and mesoscale, suggesting fairly strong interactions along the organic-inorganic hybrid interface. Exfoliation of the hybrid material in organic solvents such as THF and chloroform yields sheet- and belt-like nanostructures with lateral sizes between 10's and 100's of nanometers and a height of about 10 nm measured by AFM, which precisely maps the basal spacing of the lamellar mesostructure; further exfoliation results in nanobelts with minimum sizes around 4 nm. Finally, the sheetlike nanostructures behave as morphological chameleons, transforming into highly regular multiwalled coordination polymer nanotubes upon treatment with organic solvents.

Toroidal plasmonic eigenmodes in oligomer nanocavities for the visible.

Plasmonics has become one of the most vibrant areas in research with technological innovations impacting fields from telecommunications to medicine. Many fascinating applications of plasmonic nanostructures employ electric dipole and higher-order multipole resonances. Also magnetic multipole resonances are recognized for their unique properties. Besides these multipolar modes that easily radiate into free space, other types of electromagnetic resonances exist, so-called toroidal eigenmodes, which have been largely overlooked historically. They are strongly bound to material structures and their peculiar spatial structure renders them practically invisible to conventional optical microscopy techniques. In this Letter, we demonstrate toroidal modes in a metal ring formed by an oligomer of holes. Combined energy-filtering transmission electron microscopy and three-dimensional finite difference time domain analysis reveal their distinct features. For the study of these modes that cannot be excited by optical far-field spectroscopy, energy-filtering transmission electron microscopy emerges as the method of choice. Toroidal moments bear great potential for novel applications, for example, in the engineering of Purcell factors of quantum-optical emitters inside toroidal cavities.

Three-dimensional free-standing gold nanowire networks as a platform for catalytic applications.

We report the catalytic performance of networks of highly interconnected Au nanowires with diameters tailored between 80 and 170 nm. The networks were synthesized by electrodeposition in etched ion-track polymer templates, and the synthesis conditions were developed for optimal wire crystallinity and network homogeneity. The nanowire networks were self-supporting and could be easily handled as electrodes in electrochemical cells or other devices. The electrochemically active surface area of the networks increased systematically with increasing the wire diameter. They showed a very stable performance during 200 CV cycles of methanol oxidation reactions, with the peak current density reaching up to 200 times higher than that of a flat reference electrode, with only a 5% drop in the peak current density. The Au nanowire networks proved to be excellent model systems for investigation of the performance of porous catalysts and very promising nanosystems for application in direct alcohol fuel cell catalysts.

Experimental evidence of a size-dependent sign change of the Seebeck coefficient of Bi nanowire arrays.

The electrical transport in bismuth nanowires is strongly influenced by both sample geometry and crystallinity. Compared to bulk bismuth, the electrical transport in nanowires is dominated by size effects and influenced by surface states, which gain increasing relevance with increasing surface-to-volume ratios, i.e. with decreasing wire diameter. Bismuth nanowires with tailored diameter and crystallinity constitute, therefore, excellent model systems, allowing to study the interplay of the different transport phenomena. Here, we present temperature-dependent Seebeck coefficient and relative electrical resistance measurements of parallel bismuth nanowire arrays with diameters between 40 and 400 nm synthesized by pulsed electroplating in polymer templates. Both electrical resistance and Seebeck coefficient exhibit a non-monotonic temperature dependence, with the sign of the Seebeck coefficient changing from negative to positive with decreasing temperature. The observed behavior is size-dependent and is attributed to limitations of the mean free path of the charge carriers within the nanowires. The observed size-dependent Seebeck coefficient and in particular the size-dependent sign change opens a promising avenue for single-material thermocouples with p- and n-legs made from nanowires with different diameters.

Phase boundary propagation in large LiFePO4 single crystals on delithiation.

Large single crystals of LiFePO(4) have been chemically delithiated. The relevance of chemical oxidation in comparison with electrochemical delithiation is discussed. Analyses of the Li content and profiles were done by electron energy loss spectroscopy and secondary ion mass spectrometry. The propagation of the FePO(4) phase growing on the surface of the large single crystal was followed by in situ optical microscopy as a function of time. The kinetics were evaluated in terms of linear irreversible thermodynamics and found to be characterized by an induction period followed by parabolic growth behavior of the FePO(4) phase indicating transport control. The growth rate was shown to depend on the crystallographic orientation. Scanning electron microscopy images showed cracks and a high porosity of the FePO(4) layer due to the significant changes in the molar volumes. The transport was found to be greatly enhanced by the porosity and crack formation and hence greatly enhanced over pure bulk transport, a result which is supposed to be very relevant for battery research if coarse-grained powder is used.

Breaking the mode degeneracy of surface plasmon resonances in a triangular system.

In this paper, we present a systematic investigation of symmetry-breaking in the plasmonic modes of triangular gold nanoprisms. Their geometrical C(3v) symmetry is one of the simplest possible that allows degeneracy in the particle's mode spectrum. It is reduced to the nondegenerate symmetries C(v) or E by positioning additional, smaller gold nanoprisms in close proximity, either in a lateral or a vertical configuration. Corresponding to the lower symmetry of the system, its eigenmodes also feature lower symmetries (C(v)), or preserve only the identity (E) as symmetry. We discuss how breaking the symmetry of the plasmonic system not only breaks the degeneracy of some lower order modes, but also how it alters the damping and eigenenergies of the observed Fano-type resonances.

Surface plasmon modes of a single silver nanorod: an electron energy loss study.

We present an electron energy loss study using energy filtered TEM of spatially resolved surface plasmon excitations on a silver nanorod of aspect ratio 14.2 resting on a 30 nm thick silicon nitride membrane. Our results show that the excitation is quantized as resonant modes whose intensity maxima vary along the nanorod's length and whose wavelength becomes compressed towards the ends of the nanorod. Theoretical calculations modelling the surface plasmon response of the silver nanorod-silicon nitride system show the importance of including retardation and substrate effects in order to describe accurately the energy dispersion of the resonant modes.

Structural evolution of magnesium difluoride: from an amorphous deposit to a new polymorph.

The structural evolution of magnesium difluoride from an amorphous deposit has been investigated by in situ powder X-ray diffraction (XRPD) and transmission electron microscopy (TEM). Crystalline MgF(2) was evaporated at different temperatures, which define the vapor pressures in the range from 4.7 × 10(-3) to 1.6 × 10(-1) mbar, and deposited onto various substrates. The temperature of the substrate was systematically varied from -228 to 25 °C. Magnesium difluoride was obtained as an amorphous sample when deposited on a substrate kept at a temperature below -100 °C. Upon warming, the deposit transforms via the CaCl(2) type of structure (ß-MgF(2), at 70 °C) into the stable rutile type (α-MgF(2), 250 °C) by a displacive order-disorder phase transition. The new ß-MgF(2) polymorph was refined assuming the orthorhombic CaCl(2) type of structure (Pnnm, No. 58) with the lattice constants a = 4.592(1) Å, b = 4.938(3) Å, and c = 2.959(3) Å. When deposited above -50 °C, samples crystallize directly in the rutile structure.

Size control of PtPb intermetallic nanoparticles prepared via microemulsions.

PtPb intermetallic nanoparticles (3-6 nm) with precise control (±0.8 nm) were prepared under mild conditions by using water-in-oil (w/o) microemulsions as reaction media. The amount of the aqueous phase has no significant effect on the composition of the NPs, while it indeed affects the size of the resulting NPs in a systematic way. A precise size control can be obtained by controlling the size of the w/o-microemulsions containing the metal salts and the reducing agent, respectively.

Substrate-Selective Morphology of Cesium Iodide Clusters on Graphene.

Formation and characterization of low-dimensional nanostructures is crucial for controlling the properties of two-dimensional (2D) materials such as graphene. Here, we study the structure of low-dimensional adsorbates of cesium iodide (CsI) on free-standing graphene using aberration-corrected transmission electron microscopy at atomic resolution. CsI is deposited onto graphene as charged clusters by electrospray ion-beam deposition. The interaction with the electron beam forms two-dimensional CsI crystals only on bilayer graphene, while CsI clusters consisting of 4, 6, 7, and 8 ions are exclusively observed on single-layer graphene. Chemical characterization by electron energy-loss spectroscopy imaging and precise structural measurements evidence the possible influence of charge transfer on the structure formation of the CsI clusters and layers, leading to different distances of the Cs and I to the graphene.