RESUMO
Unraveling the catalyst surface structure and behavior during reactions is essential for both mechanistic understanding and performance optimization. Here we report a phenomenon of facet-dependent surface restructuring intrinsic to ß-Ni(OH)2 catalysts during oxygen evolution reaction (OER), discovered by the correlative ex situ and operando characterization. The ex situ study after OER reveals ß-Ni(OH)2 restructuring at the edge facets to form nanoporous Ni1-xO, which is Ni deficient containing Ni3+ species. Operando liquid transmission electron microscopy (TEM) and Raman spectroscopy further identify the active role of the intermediate ß-NiOOH phase in both the OER catalysis and Ni1-xO formation, pinpointing the complete surface restructuring pathway. Such surface restructuring is shown to effectively increase the exposed active sites, accelerate Ni oxidation kinetics, and optimize *OH intermediate bonding energy toward fast OER kinetics, which leads to an extraordinary activity enhancement of â¼16-fold. Facilitated by such a self-activation process, the specially prepared ß-Ni(OH)2 with larger edge facets exhibits a 470-fold current enhancement than that of the benchmark IrO2, demonstrating a promising way to optimize metal-(oxy)hydroxide-based catalysts.
RESUMO
High-entropy alloy (HEA) nanoparticles (NPs) have been emerging with superior compositional tunability and multielemental synergy, presenting a unique platform for material discovery and performance optimization. Here we report a synthetic approach utilizing hollow-carbon confinement in the ordinary furnace annealing to achieve the nonequilibrium HEA-NPs such as Pt0.45Fe0.18Co0.12Ni0.15Mn0.10 with uniform size â¼5.9 nm. The facile temperature control allows us not only to reveal the detailed reaction pathway through ex situ characterization but also to tailor the HEA-NP structure from the crystalline solid solution to intermetallic. The preconfinement of metal precursors is the key to ensure the uniform distribution of metal nanoparticles with confined volume, which is essential to prevent the thermodynamically favored phase separation even during the ordinary furnace annealing. Besides, the synthesized HEA-NPs exhibit remarkable activity and stability in oxygen reduction catalysis. The demonstrated synthetic approach may significantly expand the scope of HEA-NPs with uncharted composition and performance.
RESUMO
All-soluble all-iron redox flow batteries (AIRFBs) are an innovative energy storage technology that offer significant financial benefits. Stable and affordable redox-active materials are essential for the commercialization of AIRFBs, yet the battery stability must be significantly improved to achieve practical value. Herein, ferrous complexes combined with the triisopropanolamine (TIPA) ligand are identified as promising anolytes to extend battery life by reducing cross-contamination due to a pronounced steric hindrance effect. The coordination structure and failure mechanism of our Fe-TIPA complexes were determined by molecular dynamics simulation and spectroscopic experiments. By coupling with [Fe(CN)6]4 -/3- , Fe-TIPA/Fe-CN AIRFBs retained excellent stability exceeding 1831 cycles at 80 mA·cm -2 , yielding an energy efficiency of ~80% and maintaining a steady discharge capacity. Moreover, the all-soluble electrolyte was tested in an industrial-scale Fe-TIPA/Fe-CN AIRFB prototype energy storage system, where an energy efficiency of 81.3% was attained. Given the abundance of iron resources, we model the TIPA AIRFB electrolyte cost to be as low as 32.37 $/kWh, which is significantly cheaper than the current commercial level. This work demonstrates that steric hindrance is an effective measure to extended battery life, facilitating the commercial development of affordable flow batteries.
RESUMO
The establishment of active sites as the frustrated Lewis pair (FLP) has recently attracted much attention ranging from homogeneous to heterogeneous systems in the field of catalysis. Their unquenched reactivity of Lewis acid and base pairs in close proximity that are unable to form stable adducts has been shown to activate small molecules such as dihydrogen heterolytically. Herein, we show that grafted Ru metal-organic framework-based catalysts prepared via N-containing linkers are rather catalytically inactive for H2 activation despite the application of elevated temperatures. However, upon light illumination, charge polarization of the anchored Ru bipyridine complex can form a transient Lewis acid-base pair, Ru+-N- via metal-to-ligand charge transfer, as confirmed by time-dependent density functional theory (TDDFT) calculations to carry out effective H2-D2 exchange. FTIR and 2-D NMR endorse the formation of such reactive intermediate(s) upon light irradiation.
RESUMO
We report a theoretical investigation of X-ray back diffraction at grazing incidence. Based on the framework of the dynamical theory of X-ray diffraction, the grazing incidence for Si (12 4 0) back diffraction is taken as an example to resolve the eigenvalue problem inside the crystal. The dispersion surface and the resulting diffraction intensities are strongly affected by the miscut angle as well as the diffraction geometry of grazing incidence. The kinematical relationship between the incident angle and the miscut angle is well explained by Snell's law. While only the two-beam diffraction is considered, our treatment can be further extended to include the cases for multiple diffractions as well.
RESUMO
The design of efficient non-noble metal catalysts for CO2 hydrogenation to fuels and chemicals is desired yet remains a challenge. Herein, we report that single Mo atoms with a MoN3 (pyrrolic) moiety enable remarkable CO2 adsorption and hydrogenation to CO, as predicted by density functional theory studies and evidenced by a high and stable conversion of CO2 reaching about 30.4 % with a CO selectivity of almost 100 % at 500 °C and very low H2 partial pressure. Atomically dispersed MoN3 is calculated to facilitate CO2 activation and reduces CO2 to CO* via the direct dissociation path. Furthermore, the highest transition state energy in CO formation is 0.82â eV, which is substantially lower than that of CH4 formation (2.16â eV) and accounts for the dominant yield of CO. The enhanced catalytic performances of Mo/NC originate from facile CO desorption with the help of dispersed Mo on nitrogen-doped carbon (Mo/NC), and in the absence of Mo nanoparticles. The resulting catalyst preserves good stability without degradation of CO2 conversion rate even after 68â hours of continuous reaction. This finding provides a promising route for the construction of highly active, selective, and robust single-atom non-precious metal catalysts for reverse water-gas shift reaction.
RESUMO
Transition metal doped chalcogenides are one of the most important classes of catalysts that have been attracting increasing attention for petrochemical and energy related chemical transformations due to their unique physiochemical properties. For practical applications, achieving maximum atom utilization by homogeneous dispersion of metals on the surface of chalcogenides is essential. Herein, we report a detailed study of a deposition method using thiourea coordinated transition metal complexes. This method allows the preparation of a library of a wide range of single atoms including both noble and non-noble transition metals (Fe, Co, Ni, Cu, Pt, Pd, Ru) with a metal loading as high as 10 wt % on various ultrathin 2D chalcogenides (MoS2, MoSe2, WS2 and WSe2). As demonstrated by the state-of-the-art characterization, the doped single transition metal atoms interact strongly with surface anions and anion vacancies in the exfoliated 2D materials, leading to high metal dispersion in the absence of agglomeration. Taking Fe on MoS2 as a benchmark, it has been found that Fe is atomically dispersed until 10 wt %, and beyond this loading, formation of coplanar Fe clusters is evident. Atomic Fe, with a high electron density at its conduction band, exhibits a superior intrinsic activity and stability in CO2 hydrogenation to CO per Fe compared to corresponding surface Fe clusters and other Fe catalysts reported for reverse water-gas-shift reactions.
RESUMO
Hydrogen spillover is the phenomenon where a hydrogen atom, generated from the dissociative chemisorption of dihydrogen on the surface of a metal species, migrates from the metal to the catalytic support. This phenomenon is regarded as a promising avenue for hydrogen storage, yet the atomic mechanism for how the hydrogen atom can be transferred to the support has remained controversial for decades. As a result, the development of catalytic support for such a purpose is only limited to typical reducible oxide materials. Herein, by using a combination of in situ spectroscopic and imaging technique, we are able to visualize and observe the atomic pathway for which hydrogen travels via a frustrated Lewis pair that has been constructed on a nonreducible metal oxide. The interchangeable status between the hydrogen, proton, and hydride is carefully characterized and demonstrated. It is envisaged that this study has opened up new design criteria for hydrogen storage material.
RESUMO
There is increasing interest in capturing H2 generated from renewables with CO2 to produce methanol. However, renewable hydrogen production is expensive and in limited quantity compared to CO2 . Excess CO2 and limited H2 in the feedstock gas is not favorable for CO2 hydrogenation to methanol, causing low activity and poor methanol selectivity. Now, a class of Rh-In catalysts with optimal adsorption properties to the intermediates of methanol production is presented. The Rh-In catalyst can effectively catalyze methanol synthesis but inhibit the reverse water-gas shift reaction under H2 -deficient gas flow and shows the best competitive methanol productivity under industrially applicable conditions in comparison with reported values. This work demonstrates a strong potential of Rh-In bimetallic composition, from which a convenient methanol synthesis based on flexible feedstock compositions (such as H2 /CO2 from biomass derivatives) with lower energy cost can be established.
RESUMO
A new oxide NaCu3Fe2Os2O12 is synthesized using high pressure and temperature conditions. The Rietveld structural analysis shows that the compound possesses both A- and B-site ordered quadruple perovskite structure in Pn3Ì symmetry. The valence states of transition metals are confirmed to be Cu2+/Fe3+/Os5.5+. The three transition metals all take part in magnetic interactions and generate strong Cu2+(↑)Fe3+(↑)Os5.5+(↓) ferrimagnetic superexchange interactions with a high Curie temperature about 380 K. Electrical transport measurements suggest its half-metallic properties. The first-principles theoretical calculations demonstrate that the compound has a spin-down conducting band and a spin-up insulating band with a wide energy gap.
RESUMO
This work reports an unconventional defect engineering approach using synchrotron-radiation-based X-rays on ceria nanocrystal catalysts of particle sizes 4.4-10.6â nm. The generation of a large number of oxygen-vacancy defects (OVDs), and therefore an effective reduction of cations, has been found in CeO2 catalytic materials bombarded by high-intensity synchrotron X-ray beams of beam size 1.5â mmâ ×â 0.5â mm, photon energies of 5.5-7.8â keV and photon fluxes up to 1.53â ×â 1012 photons s-1. The experimentally observed cation reduction was theoretically explained by a first-principles formation-energy calculation for oxygen vacancy defects. The results clearly indicate that OVD formation is mainly a result of X-ray-excited core holes that give rise to valence holes through electron down conversion in the material. Thermal annealing and subvalent Y-doping were also employed to modulate the efficiency of oxygen escape, providing extra control on the X-ray-induced OVD generating process. Both the core-hole-dominated bond breaking and oxygen escape mechanisms play pivotal roles for efficient OVD formation. This X-ray irradiation approach, as an alternative defect engineering method, can be applied to a wide variety of nanostructured materials for physical-property modification.
RESUMO
Hydrated niobium oxides are used as strong solid acids with a wide variety of catalytic applications, yet the correlations between structure and acidity remain unclear. New insights into the structural features giving rise to Lewis and Brønsted acid sites are presently achieved. It appears that Lewis acid sites can arise from lower coordinate NbO5 and in some cases NbO4 sites, which are due to the formation of oxygen vacancies in thin and flexible NbO6 systems. Such structural flexibility of Nb-O systems is particularly pronounced in high surface area nanostructured materials, including few-layer to monolayer or mesoporous Nb2O5·nH2O synthesized in the presence of stabilizers. Bulk materials on the other hand only possess a few acid sites due to lower surface areas and structural rigidity: small numbers of Brønsted acid sites on HNb3O8 arise from a protonic structure due to the water content, whereas no acid sites are detected for anhydrous crystalline H-Nb2O5.
RESUMO
A positive myocardial inotropic effect achieved using HNO/NO(-) , compared with NOâ , triggered attempts to explore novel nitroxyl donors for use in clinical applications in vascular and myocardial pharmacology. To develop M-NO complexes for nitroxyl chemistry and biology, modulation of direct nitroxyl-transfer reactivity of dinitrosyl iron complexes (DNICs) is investigated in this study using a Fe(III) -porphyrin complex and proteins as a specific probe. Stable dinuclear {Fe(NO)2 }(9) DNIC [Fe(µ-(Me) Pyr)(NO)2 ]2 was discovered as a potent nitroxyl donor for nitroxylation of Fe(III) -heme centers through an associative mechanism. Beyond the efficient nitroxyl transfer, transformation of DNICs into a chemical biology probe for nitroxyl and for pharmaceutical applications demands further efforts using in vitro/in vivo studies.
RESUMO
Nitrogen doped carbon materials have been studied as catalyst support for ammonia decomposition. There are 4 different types of nitrogen environments (graphitic, pyrrolic, pyridinic and nitrogen oxide) on the amorphous support identified. In this paper, we report a 5%Ru on MgCO3 pre-treated nitrogen doped carbon catalyst with high content of edge nitrogen-containing sites which displays an ammonia conversion rate of over 90% at 500°C and WHSV = 30,000 mL gcat -1 h-1. It also gives an impressive hydrogen production rate of 31.3 mmol/(min gcat) with low apparent activation energy of 43 kJ mol-1. Fundamental studies indicate that the distinct average Ru-N4 coordination site on edge regions is responsible for such high catalytic activity. Ammonia is stepwise decomposed via a Ru-N(H)-N(H)-Ru intermediate. This associative mechanism circumvents the direct cleavage of energetic surface nitrogen from metal to form N2 hence lowering the activation barrier for the decomposition over this catalyst.
RESUMO
The development of new recyclable and inexpensive electrochemically active species for water oxidation catalysis is the most crucial step for future utilization of renewables. Particularly, transition metal complexes containing internal multiple, cooperative metal centers to couple with redox catalysts in the inorganic Keggin-type polyoxometalate (POM) framework at high potential or under extreme pH conditions would be promising candidates. However, most reported Ni-containing POMs have been highly unstable towards hydrolytic decomposition, which precludes them from application as water oxidation catalysts (WOCs). Here, we have prepared new tri-Ni-containing POMs with variable oxidation states by charge tailored synthetic strategies for the first time and developed them as recyclable POMs for water oxidation catalysts. In addition, by implanting corresponding POM anions into the positively charged MIL-101(Cr) metal-organic framework (MOF), the entrapped Ni2+/Ni3+ species can show complete recyclability for water oxidation catalysis without encountering uncontrolled hydrolysis of the POM framework. As a result, a low onset potential of approximately 1.46 V vs. NHE for water oxidation with stable WOC performance is recorded. Based on this study, rational design and stabilization of other POM-electrocatalysts containing different multiple transition metal centres could be made possible.
RESUMO
Designing high-performance thermal catalysts with stable catalytic sites is an important challenge. Conventional wisdom holds that strong metal-support interactions can benefit the catalyst performance, but there is a knowledge gap in generalizing this effect across different metals. Here, we have successfully developed a generalizable strong metal-support interaction strategy guided by Tammann temperatures of materials, enabling functional oxide encapsulation of transition metal nanocatalysts. As an illustrative example, Co@BaAl2O4 core@shell is synthesized and tracked in real-time through in-situ microscopy and spectroscopy, revealing an unconventional strong metal-support interaction encapsulation mechanism. Notably, Co@BaAl2O4 exhibits exceptional activity relative to previously reported core@shell catalysts, displaying excellent long-term stability during high-temperature chemical reactions and overcoming the durability and reusability limitations of conventional supported catalysts. This pioneering design and widely applicable approach has been validated to guide the encapsulation of various transition metal nanoparticles for environmental tolerance functionalities, offering great potential to advance energy, catalysis, and environmental fields.
RESUMO
We present a new composite catalyst system of highly defective graphene quantum dots (HDGQDs)-doped 1T/2H-MoS2 for efficient hydrogen evolution reactions (HER). The high electrocatalytic activity, represented by an overpotential of 136.9 mV and a Tafel slope of 57.1 mV/decade, is due to improved conductivity, a larger number of active sites in 1T-MoS2 compared to that in 2H-MoS2, and additional defects introduced by HDGQDs. High-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, x-ray diffraction (XRD) and x-ray photoelectron spectroscopy (XPS) were used to characterize both the 1T/2H-MoS2 and GQDs components while Fourier-transform infrared spectroscopy (FTIR) was employed to identify the functional groups on the edge and defect sites in the HDGQDs. The morphology of the composite catalyst was also examined by field emission scanning electron microscopy (FESEM). All experimental data demonstrated that each component contributes unique advantages that synergistically lead to the significantly improved electrocatalytic activity for HER in the composite catalyst system.
RESUMO
Charge disproportion at octahedral Fe sites in magnetite was observed at low temperature using two inversion-symmetry related three-wave resonant x-ray diffraction, 022-311 and 002-Ì 3Ì 1, near the iron K edge. Both of the three-wave cases involve the (002) forbidden-weak reflection. The self-normalized three-wave to two-wave (002) diffraction intensity ratio automatically cancels the self-absorption effect and leads to direct determination of charge disproportion for magnetite below 120 K. This approach provides a more direct and effective way for extracting charge-ordering information.
RESUMO
Traditional nanostructured design of cerium oxide catalysts typically focuses on their shape, size, and elemental composition. We report a different approach to enhance the catalytic activity of cerium oxide nanostructures through engineering high density of oxygen vacancy defects in these catalysts without dopants. The defect engineering was accomplished by a low pressure thermal activation process that exploits the nanosize effect of decreased oxygen storage capacity in nanostructured cerium oxides.