Viewpoints: diet and dietary adaptations in early hominins: the hard food perspective.

Recent biomechanical analyses examining the feeding adaptations of early hominins have yielded results consistent with the hypothesis that hard foods exerted a selection pressure that influenced the evolution of australopith morphology. However, this hypothesis appears inconsistent with recent reconstructions of early hominin diet based on dental microwear and stable isotopes. Thus, it is likely that either the diets of some australopiths included a high proportion of foods these taxa were poorly adapted to consume (i.e., foods that they would not have processed efficiently), or that aspects of what we thought we knew about the functional morphology of teeth must be wrong. Evaluation of these possibilities requires a recognition that analyses based on microwear, isotopes, finite element modeling, and enamel chips and cracks each test different types of hypotheses and allow different types of inferences. Microwear and isotopic analyses are best suited to reconstructing broad dietary patterns, but are limited in their ability to falsify specific hypotheses about morphological adaptation. Conversely, finite element analysis is a tool for evaluating the mechanical basis of form-function relationships, but says little about the frequency with which specific behaviors were performed or the particular types of food that were consumed. Enamel chip and crack analyses are means of both reconstructing diet and examining biomechanics. We suggest that current evidence is consistent with the hypothesis that certain derived australopith traits are adaptations for consuming hard foods, but that australopiths had generalized diets that could include high proportions of foods that were both compliant and tough.

Microwear, mechanics and the feeding adaptations of Australopithecus africanus.

Recent studies of dental microwear and craniofacial mechanics have yielded contradictory interpretations regarding the feeding ecology and adaptations of Australopithecus africanus. As part of this debate, the methods used in the mechanical studies have been criticized. In particular, it has been claimed that finite element analysis has been poorly applied to this research question. This paper responds to some of these mechanical criticisms, highlights limitations of dental microwear analysis, and identifies avenues of future research.

The feeding biomechanics and dietary ecology of Australopithecus africanus.

The African Plio-Pleistocene hominins known as australopiths evolved a distinctive craniofacial morphology that traditionally has been viewed as a dietary adaptation for feeding on either small, hard objects or on large volumes of food. A historically influential interpretation of this morphology hypothesizes that loads applied to the premolars during feeding had a profound influence on the evolution of australopith craniofacial form. Here, we test this hypothesis using finite element analysis in conjunction with comparative, imaging, and experimental methods. We find that the facial skeleton of the Australopithecus type species, A. africanus, is well suited to withstand premolar loads. However, we suggest that the mastication of either small objects or large volumes of food is unlikely to fully explain the evolution of facial form in this species. Rather, key aspects of australopith craniofacial morphology are more likely to be related to the ingestion and initial preparation of large, mechanically protected food objects like large nuts and seeds. These foods may have broadened the diet of these hominins, possibly by being critical resources that australopiths relied on during periods when their preferred dietary items were in short supply. Our analysis reconciles apparent discrepancies between dietary reconstructions based on biomechanics, tooth morphology, and dental microwear.

A finite element analysis of masticatory stress hypotheses.

Understanding how the skull transmits and dissipates forces during feeding provides insights into the selective pressures that may have driven the evolution of primate skull morphology. Traditionally, researchers have interpreted masticatory biomechanics in terms of simple global loading regimes applied to simple shapes (i.e., bending in sagittal and frontal planes, dorsoventral shear, and torsion of beams and cylinders). This study uses finite element analysis to examine the extent to which these geometric models provide accurate strain predictions in the face and evaluate whether simple global loading regimes predict strains that approximate the craniofacial deformation pattern observed during mastication. Loading regimes, including those simulating peak loads during molar chewing and those approximating the global loading regimes, were applied to a previously validated finite element model (FEM) of a macaque (Macaca fascicularis) skull, and the resulting strain patterns were compared. When simple global loading regimes are applied to the FEM, the resulting strains do not match those predicted by simple geometric models, suggesting that these models fail to generate accurate predictions of facial strain. Of the four loading regimes tested, bending in the frontal plane most closely approximates strain patterns in the circumorbital region and lateral face, apparently due to masseter muscle forces acting on the zygomatic arches. However, these results indicate that no single simple global loading regime satisfactorily accounts for the strain pattern found in the validated FEM. Instead, we propose that FE models replace simple cranial models when interpreting bone strain data and formulating hypotheses about craniofacial biomechanics.

Forensic botany: time to embrace natural history collections, large scale environmental data and environmental DNA.

Forensic botany is a diverse discipline that spans many aspects of plant sciences, particularly taxonomy, field botany, anatomy, and ecology. Internationally, there is a significant opportunity to expand the application of forensic botany in criminal investigations, especially war crimes, genocide, homicide, sexual violence, serious physical assault, illegal trade in endangered species and wildlife crime. In civil proceedings, forensic botany may, for example, be called upon in trade disputes such as accidental contamination of commodities. Despite the potential, there are barriers to the wider application of forensic botany in criminal cases; there is a widespread need to improve the efficiency of botanical trace evidence identification. This could partly be addressed by embracing innovations in image recognition and by accessing the huge quantity of specimens and images housed in natural history collections worldwide. Additionally, the recent advances in DNA sequencing technologies and the expansion of environmental DNA (eDNA) and forensic ecogenomics, offers opportunities to more rapidly provide species-level identifications. The impact of taphonomic processes upon vegetation, and vice versa, remains poorly understood; improved understanding of these interactions and their ecological impacts may be invaluable in improving clandestine burial search protocols.

Genetic evidence for plural introduction pathways of the invasive weed Paterson's curse (Echium plantagineum L.) to southern Australia.

Paterson's curse (Echium plantagineum L. (Boraginaceae)), is an herbaceous annual native to Western Europe and northwest Africa. It has been recorded in Australia since the 1800's and is now a major weed in pastures and rangelands, but its introduction history is poorly understood. An understanding of its invasion pathway and subsequent genetic structure is critical to the successful introduction of biological control agents and for provision of informed decisions for plant biosecurity efforts. We sampled E. plantagineum in its native (Iberian Peninsula), non-native (UK) and invaded ranges (Australia and South Africa) and analysed three chloroplast gene regions. Considerable genetic diversity was found among E. plantagineum in Australia, suggesting a complex introduction history. Fourteen haplotypes were identified globally, 10 of which were co-present in Australia and South Africa, indicating South Africa as an important source population, likely through contamination of traded goods or livestock. Haplotype 4 was most abundant in Australia (43%), and in historical and contemporary UK populations (80%), but scarce elsewhere (< 17%), suggesting that ornamental and/or other introductions from genetically impoverished UK sources were also important. Collectively, genetic evidence and historical records indicate E. plantagineum in southern Australia exists as an admixture that is likely derived from introduced source populations in both the UK and South Africa.

Mechanical evidence that Australopithecus sediba was limited in its ability to eat hard foods.

Australopithecus sediba has been hypothesized to be a close relative of the genus Homo. Here we show that MH1, the type specimen of A. sediba, was not optimized to produce high molar bite force and appears to have been limited in its ability to consume foods that were mechanically challenging to eat. Dental microwear data have previously been interpreted as indicating that A. sediba consumed hard foods, so our findings illustrate that mechanical data are essential if one aims to reconstruct a relatively complete picture of feeding adaptations in extinct hominins. An implication of our study is that the key to understanding the origin of Homo lies in understanding how environmental changes disrupted gracile australopith niches. Resulting selection pressures led to changes in diet and dietary adaption that set the stage for the emergence of our genus.

Modeling elastic properties in finite-element analysis: how much precision is needed to produce an accurate model?

The influence of elastic properties on finite-element analysis was investigated using a finite-element model of a Macaca fascicularis skull. Four finite-element analyses were performed in which the model was assigned different sets of elastic properties. In analysis 1, elastic properties were modeled isotropically using published data obtained from human limb bones. Analyses 2-4 used data obtained from skulls of a closely allied species, M. mulatta, but varied as to how those data were incorporated into the model. In analysis 2, the model was assigned a single set of isotropic elastic properties. In analysis 3, each region within the model was assigned its own set of isotropic elastic properties. Finally, in analysis 4, each region received its own set of orthotropic elastic properties. Although a qualitative assessment indicates that the locations of strain concentrations across the model are broadly similar in all analyses, a quantitative assessment of strain indicates some differences between the analyses. When strain data from the finite-element analyses were compared to strain data derived from in vivo experiments, it was found that the model deformed most realistically using the orthotropic elastic properties employed in analysis 4. Results suggest that finite-element analyses can be adversely affected when elastic properties are modeled imprecisely, and that modelers should attempt to obtain elastic properties data about the species and skeletal elements that are the subjects of their analyses.

Modeling masticatory muscle force in finite element analysis: sensitivity analysis using principal coordinates analysis.

Our work on a finite element model of the skull of Macaca aims to investigate the functional significance of specific features of primate skulls and to determine to which of the input variables (elastic properties, muscle forces) the model behavior is most sensitive. Estimates of muscle forces acting on the model are derived from estimates of physiological cross-sectional areas (PCSAs) of the jaw muscles scaled by relative electromyographic (EMG) amplitudes recorded in vivo. In this study, the behavior of the model was measured under different assumptions regarding the PCSAs of the jaw muscles and the latency between EMG activity in those muscles and the resulting force production. Thirty-six different loading regimes were applied to the model using four different PCSA sets and nine different PCSA scaling parameters. The four PCSA sets were derived from three different macaque species and one genus average, and the scaling parameters were either EMGs from 10, 20, 30, 40, 50 and 60 msec prior to peak bite force, or simply 100%, 50%, or 25% of peak muscle force. Principal coordinates analysis was used to compare the deformations of the model produced by the 36 loading regimes. Strain data from selected sites on the model were also compared with in vivo bone strain data. The results revealed that when varying the external muscle forces within these boundaries, the majority of the variation in model behavior is attributable to variation in the overall magnitude rather than the relative amount of muscle force generated by each muscle. Once this magnitude-related variation in model deformation was accounted for, significant variation was attributable to differences in relative muscle recruitment between working and balancing sides. Strain orientations at selected sites showed little variation across loading experiments compared with variation documented in vivo. These data suggest that in order to create an accurate and valid finite element model of the behavior of the primate skull at a particular instant during feeding, it is important to include estimates of the relative recruitment levels of the masticatory muscles. However, a lot can be learned about patterns of skull deformation, in fossil species for example, by applying external forces proportional to the estimated relative PCSAs of the jaw adductors.

Finite element analysis in functional morphology.

This article reviews the fundamental principles of the finite element method and the three basic steps (model creation, solution, and validation and interpretation) involved in using it to examine structural mechanics. Validation is a critical step in the analysis, without which researchers cannot evaluate the extent to which the model represents or is relevant to the real biological condition. We discuss the method's considerable potential as a tool to test biomechanical hypotheses, and major hurdles involved in doing so reliably, from the perspective of researchers interested in functional morphology and paleontology. We conclude with a case study to illustrate how researchers deal with many of the factors and assumptions involved in finite element analysis.

Biomechanical implications of intraspecific shape variation in chimpanzee crania: moving toward an integration of geometric morphometrics and finite element analysis.

In a broad range of evolutionary studies, an understanding of intraspecific variation is needed in order to contextualize and interpret the meaning of variation between species. However, mechanical analyses of primate crania using experimental or modeling methods typically encounter logistical constraints that force them to rely on data gathered from only one or a few individuals. This results in a lack of knowledge concerning the mechanical significance of intraspecific shape variation that limits our ability to infer the significance of interspecific differences. This study uses geometric morphometric methods (GM) and finite element analysis (FEA) to examine the biomechanical implications of shape variation in chimpanzee crania, thereby providing a comparative context in which to interpret shape-related mechanical variation between hominin species. Six finite element models (FEMs) of chimpanzee crania were constructed from CT scans following shape-space Principal Component Analysis (PCA) of a matrix of 709 Procrustes coordinates (digitized onto 21 specimens) to identify the individuals at the extremes of the first three principal components. The FEMs were assigned the material properties of bone and were loaded and constrained to simulate maximal bites on the P(3) and M(2) . Resulting strains indicate that intraspecific cranial variation in morphology is associated with quantitatively high levels of variation in strain magnitudes, but qualitatively little variation in the distribution of strain concentrations. Thus, interspecific comparisons should include considerations of the spatial patterning of strains rather than focus only on their magnitudes.

The feeding biomechanics and dietary ecology of Paranthropus boisei.

The African Plio-Pleistocene hominins known as australopiths evolved derived craniodental features frequently interpreted as adaptations for feeding on either hard, or compliant/tough foods. Among australopiths, Paranthropus boisei is the most robust form, exhibiting traits traditionally hypothesized to produce high bite forces efficiently and strengthen the face against feeding stresses. However, recent mechanical analyses imply that P. boisei may not have been an efficient producer of bite force and that robust morphology in primates is not necessarily strong. Here we use an engineering method, finite element analysis, to show that the facial skeleton of P. boisei is structurally strong, exhibits a strain pattern different from that in chimpanzees (Pan troglodytes) and Australopithecus africanus, and efficiently produces high bite force. It has been suggested that P. boisei consumed a diet of compliant/tough foods like grass blades and sedge pith. However, the blunt occlusal topography of this and other species suggests that australopiths are adapted to consume hard foods, perhaps including grass and sedge seeds. A consideration of evolutionary trends in morphology relating to feeding mechanics suggests that food processing behaviors in gracile australopiths evidently were disrupted by environmental change, perhaps contributing to the eventual evolution of Homo and Paranthropus.

The structural rigidity of the cranium of Australopithecus africanus: implications for diet, dietary adaptations, and the allometry of feeding biomechanics.

Australopithecus africanus is an early hominin (i.e., human relative) believed to exhibit stress-reducing adaptations in its craniofacial skeleton that may be related to the consumption of resistant food items using its premolar teeth. Finite element analyses simulating molar and premolar biting were used to test the hypothesis that the cranium of A. africanus is structurally more rigid than that of Macaca fascicularis, an Old World monkey that lacks derived australopith facial features. Previously generated finite element models of crania of these species were subjected to isometrically scaled loads, permitting a direct comparison of strain magnitudes. Moreover, strain energy (SE) in the models was compared after results were scaled to account for differences in bone volume and muscle forces. Results indicate that strains in certain skeletal regions below the orbits are higher in M. fascicularis than in A. africanus. Moreover, although premolar bites produce von Mises strains in the rostrum that are elevated relative to those produced by molar biting in both species, rostral strains are much higher in the macaque than in the australopith. These data suggest that at least the midface of A. africanus is more rigid than that of M. fascicularis. Comparisons of SE reveal that the A. africanus cranium is, overall, more rigid than that of M. fascicularis during premolar biting. This is consistent with the hypothesis that this hominin may have periodically consumed large, hard food items. However, the SE data suggest that the A. africanus cranium is marginally less rigid than that of the macaque during molar biting. It is hypothesized that the SE results are being influenced by the allometric scaling of cranial cortical bone thickness.

Masticatory biomechanics and its relevance to early hominid phylogeny: an examination of palatal thickness using finite-element analysis.

It has been proposed that morphological characters functionally related to mastication may be unreliable indicators of early hominid phylogeny. One hypothesis states that masticatory characters are highly prone to homoplasy. A second hypothesis states that such characters are likely to be morphologically integrated and thus violate the assumption of character independence implicit in all phylogenetic analyses. Evaluation of these hypotheses requires that masticatory features be accurately identified, but, to date, there have been relatively few attempts to test precisely which early hominid features are functionally related to chewing. This paper uses finite-element analysis to evaluate the functional relationships of a character--palatal thickness--that is one of several Paranthropus synapomorphies putatively related to mastication. A finite-element model of 145,680 elements was created from sixty-one 2-mm-thick CT scans of a Macaca fascicularis skull. The model was assigned the elastic properties of facial bone and loaded with muscle forces corresponding to the moment of centric occlusion during mastication. The model was constrained so as to produce a reaction force (corresponding to the bite force) at M(1). With a few exceptions, the strain patterns in the finite-element model compare well with those gathered from published and unpublished bone-strain experiments. The model was then modified to have a thick palate. The model was reloaded using an identical loading regime, and the strain patterns of the original and thick-palate models were compared. Although a thickened palate acts to reduce palatal strain, strains are elevated in other facial regions. This suggests that a thick palate would not have evolved in isolation as an adaptation to withstand masticatory stress. Rather, a thick palate may have evolved in concert with a suite of other facial features that share a stress-resistance function. This appears to be consistent with hypotheses positing that at least some facial features related to chewing evolved in an integrated fashion. More functional studies of other facial features are needed, as are formal studies of morphological integration.

Tooth-root form and function in platyrrhine seed-eaters.

Research into the functional and adaptive basis of tooth crown form has provided a useful framework for the inference of diet in extinct primates. However, our understanding of variation in tooth-root form is limited. Studies within the clinical literature emphasize the influence of tooth-root surface area on stress resistance, but it is not known if root form has diversified during primate evolution in relation to dietary specialization. This hypothesis was tested by quantifying maxillary canine and postcanine tooth-root surface areas in four platyrrhine species that differ in the material properties of their diet: Cebus apella, Cebus albifrons, Chiropotes satanas, and Pithecia pithecia. Pairwise comparisons between closely related taxa support predictions based on dietary differences. Taxa that regularly consume resistant seeds (Cebus apella and Chiropotes satanas) exhibit significantly larger relative surface area values for those teeth used in seed processing than closely related taxa that consume resistant foods less often (Cebus albifrons and Pithecia pithecia). Additionally, relative molar-root surface area appears to be greater in Pithecia than in Chiropotes, as predicted from the more folivorous diet of Pithecia. Tooth-root surface area was also found to vary along the tooth row and should therefore have a significant influence on antero-posterior bite-force gradients. The results of this study suggest a close relationship between tooth-root form and patterns of occlusal loading. Further elucidation of this relationship could improve our inferences of diet in extinct taxa, and augment research into the mechanics and evolution of feeding.