A methodology for image-based measurement of plate movement in disengaged wet clutches.

The drag loss behavior of a disengaged wet clutch is influenced, among other things, by the movement of the plates. Therefore, knowledge about the plate movement is essential for investigating and optimizing the drag loss behavior. This paper presents a methodology for image-based measurement of plate movement in disengaged wet clutches. A drag torque test rig is equipped with a camera to create the image series. The oil displacement from the measuring zone is crucial to obtain permanent optical access to the clutch pack. The rough plate positions are determined by segmentation using thresholding and template matching. Using the Canny edge detector significantly improves the accuracy of the position evaluation. The plate positions are finally converted into a metric unit based on the real plate thicknesses. The clearances are calculated from the determined positions of two adjacent plates. In the ideal case, an evaluation accuracy in the range of a few micrometers can be achieved. The image evaluation methodology is universally applicable to different clutch sizes, friction systems, plate types, and plate numbers. The methodology enables researchers to generate fundamental knowledge and derive design guidelines based on this, for example. In the development phase, it can also be used to optimize the design and operating parameters.

Experimental investigation of drag loss behavior of dip-lubricated wet clutches for building a data-driven prediction model.

Fundamental knowledge of wet clutches' drag loss behavior is essential for designing low-loss clutch systems. In contrast to the widely investigated injection lubrication, more comprehensive knowledge is needed on the drag loss behavior of dip-lubricated wet clutches. In the development phase, data-driven models allow drag loss predictions with low computational effort and, at the same time, sufficient accuracy. Therefore, this study aimed to deepen and expand knowledge of the drag loss behavior of dip-lubricated wet clutches based on experimental investigations. Moreover, the investigations were designed and conducted so that the generated data and findings can be used in further research for building data-driven prediction models. The investigations were conducted on two clutch systems from automotive and industrial applications. The practice-relevant parameters of clearance, oil level, oil viscosity, and plate shape were investigated based on a mixed-level full factorial design. The evaluation shows that a reduction in drag loss can be achieved primarily by increasing the clearance, reducing the oil viscosity, and choosing waved plates. The obtained drag loss behavior can be traced back to the form of oil displacement from the gaps. The displacement process, in turn, is influenced by the operating and geometry parameters. Although the flow in the gaps develops differently for dip and injection lubrication over differential speed, the study shows comparable integral effects of the influencing parameters for both types of lubrication. The generated datasets contain the investigated parameters as features and characteristic drag loss values as targets. The findings can support the selection and configuration of the machine learning algorithm and the validation of the trained models. The described procedure can serve as a template for generating and analyzing datasets for data-driven modeling of wet clutches' drag losses.

Experimental analysis of oil flow and drag torque generation in disengaged wet clutches.

Fundamental knowledge of the oil flow in a disengaged wet clutch is essential for optimizing the cooling performance and the drag losses. However, no fundamental information on the oil flow and drag torque generation is available for dip-lubricated wet clutches. Therefore, the oil flow and drag torque generation in the sub-millimeter gap of a dip-lubricated wet clutch was experimentally investigated for three practically relevant oil levels. To enable optical access to the gap, transparent components were used. Further, a high-speed camera was used to capture the oil flow in the gap and grooving. Independent of the set oil level, the gap is oil-filled at low differential speeds, resulting in a single-phase flow. The drag torque increases approximately linearly with increasing differential speed due to the fluid shearing. In certain regions of the waffle grooving, air bubbles form locally. The air bubbles preferably occur in the grooves oriented in the radial direction, while the grooves oriented in the peripheral direction are filled with oil. Above a certain differential speed, the oil is continuously displaced from the gap, starting from the inside, due to the increasing centrifugal force. Consequently, the drag torque increases in a degressive manner until a maximum value is finally reached. The ongoing displacement of oil from the gap eventually results in a decrease in the drag torque. A steady drag torque is generated only when the oil is almost entirely displaced from the gap. Since the oil displacement from the gap already commences at a low differential speed, the cooling performance is limited for dip-lubricated wet clutches. The continuous displacement of oil from the gap can be held up, among other things, by increasing the oil level.

Predictors of Recurrence After Catheter Ablation of Persistent Atrial Fibrillation.

Catheter ablation of atrial fibrillation (AF) has been increasingly used to treat symptomatic patients.Within the last years a growing interest in ablation of persistent AF forms has evolved.Factors that may influence outcome of these procedures to treat persistent AF may be patient-specific (pre-procedural),procedure-related or may involve different post-ablation followup strategies. In this review potential factors predicting recurrence of AF after ablation of persistent AF have been evaluated.In essence, data is limited mostly due to incongruent definitions of persistent AF.Left atrial dimensions, duration of continuous AF and AF cycle length may be patient-specific predictors of outcome. Intra-procedural parameters involved in recurrence prediction may be extent of ablation (effective pulmonary vein isolation appears mandatory) and termination of AF during ablation. Timing and number of cardioversion if persistent AF recurs may predict outcome, as well. Many studies have identified strators for higher recurrence rates in rather small patient groups and need to be further evaluated in larger patient collectives.